Fluoride anodic films on stainless-steel fomites to reduce transmission infections.

The growing concern arising from viruses with pandemic potential and multi-resistant bacteria responsible for hospital-acquired infections and outbreaks of food poisoning has led to an increased awareness of indirect contact transmission. This has resulted in a renewed interest to confer antimicrobial properties to commonly used metallic materials. The present work provides a full characterization of optimized fluoride anodic films grown in stainless steel 304L as well as their antimicrobial properties. Antibacterial tests show that the anodic film, composed mainly of chromium and iron fluorides, reduces the count and the percentage of the area covered by 50% and 87.7% for Pseudomonas aeruginosa and Stenotrophomonas maltophilia, respectively. Virologic tests show that the same treatment reduces the infectivity of the coronavirus HCoV-229E-GFP, in comparison with the non-anodized stainless steel 304L.IMPORTANCEThe importance of environmental surfaces as a source of infection is a topic of particular interest today, as many microorganisms can survive on these surfaces and infect humans through direct contact. Modification of these surfaces by anodizing has been shown to be useful for some alloys of medical interest. This work evaluates the effect of anodizing on stainless steel, a metal widely used in a variety of applications. According to the study, the fluoride anodic layers reduce the colonization of the surfaces by both bacteria and viruses, thus reducing the risk of acquiring infections from these sources.

An unusual case of endotipsitis: persistent infection and migration to the right atrium of a transjugular intrahepatic portosystemic shunt (TIPS).

Endotipsitis is an underdiagnosed entity mainly because it requires a high initial level of suspicion. It should be considered in the differential diagnosis of persistent bacteremia in the cirrhotic patient with TIPS. Most cases are treated conservatively with a long-term antibiotherapy, due to the impossibility of surgical removal of the TIPS, except in a liver transplant or autopsy. The patient we present had endotipsitis that manifested as persistent bacteremia with thrombosis of the TIPS. Initially, conservative management with intravenous antibiotherapy was performed; however, due to mechanical complications caused by migration of the original endoprosthesis, it was decided to perform surgery.

Efficacy and safety of colistin plus beta-lactams for bone and joint infection caused by fluoroquinolone-resistant gram-negative bacilli: a prospective multicenter study.

OBJECTIVES: The prognosis of bone and joint infections (BJI) caused by Gram-negative bacilli (GNB) worsens significantly in the face of fluoroquinolone-resistance. In this setting, scarce pre-clinical and clinical reports suggest that intravenous beta-lactams plus colistin may improve outcome. Our aim was to assess the efficacy and safety of this treatment in a well-characterized prospective cohort. METHODS: Observational, prospective, non-comparative, multicenter (14 hospitals) study of adults with BJI caused by fluoroquinolone-resistant GNB treated with surgery and intravenous beta-lactams plus colistin for ≥ 21 days. The primary endpoint was the cure rate. RESULTS: Of the 44 cases included (median age 72 years [IQR 50-81], 22 [50%] women), 32 (73%) had an orthopedic device-related infection, including 17 (39%) prosthetic joints. Enterobacterales were responsible for 27 (61%) episodes, and Pseudomonas spp for 17 (39%), with an overall rate of MDR/XDR GNB infections of 27/44 (61%). Patients were treated with colistin plus intravenous beta-lactam for 28 days (IQR 22-37), followed by intravenous beta-lactam alone for 19 days (IQR 5-35). The cure rate (intention-to-treat analysis; median follow-up = 24 months, IQR 19-30) was 82% (95% CI 68%-90%) and particularly, 80% (95% CI 55%-93%) among patients managed with implant retention. Adverse events (AEs) leading to antimicrobial withdrawal occurred in 10 (23%) cases, all of which were reversible. Colistin AEs were associated with higher plasma drug concentrations (2.8 mg/L vs. 0.9 mg/L, p = 0.0001). CONCLUSIONS: Combination therapy with intravenous beta-lactams plus colistin is an effective regimen for BJI caused by fluoroquinolone-resistant GNB. AEs were reversible and potentially preventable by close therapeutic drug monitoring.

Atypical Mutational Spectrum of SARS-CoV-2 Replicating in the Presence of Ribavirin.

We report that ribavirin exerts an inhibitory and mutagenic activity on SARS-CoV-2-infecting Vero cells, with a therapeutic index higher than 10. Deep sequencing analysis of the mutant spectrum of SARS-CoV-2 replicating in the absence or presence of ribavirin indicated an increase in the number of mutations, but not in deletions, and modification of diversity indices, expected from a mutagenic activity. Notably, the major mutation types enhanced by replication in the presence of ribavirin were A→G and U→C transitions, a pattern which is opposite to the dominance of G→A and C→U transitions previously described for most RNA viruses. Implications of the inhibitory activity of ribavirin, and the atypical mutational bias produced on SARS-CoV-2, for the search for synergistic anti-COVID-19 lethal mutagen combinations are discussed.

Clinical Evaluation of Nontuberculous Mycobacteria (NTM) Elite Agar, a New Medium for the Isolation of NTM: a Multicenter Study.

Nontuberculous mycobacteria (NTM) are gaining interest with the increased number of infected patients. NTM Elite agar is designed specifically for the isolation of NTM without the decontamination step. We assessed the clinical performance of this medium combined with Vitek mass spectrometry (MS) matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) technology for the isolation and identification of NTM in a prospective multicenter study, including 15 laboratories (24 hospitals). A total of 2,567 samples from patients with suspected NTM infection were analyzed (1,782 sputa, 434 bronchial aspirates, 200 bronchoalveolar lavage samples, 34 bronchial lavage samples, and 117 other samples). A total of 220 samples (8.6%) were positive with existing laboratory methods against 330 with NTM Elite agar (12.8%). Using the combination of both methods, 437 isolates of NTM were detected in 400 positive samples (15.6% of samples). In total, 140 samples of the standard procedures (SP) and 98 of the NTM Elite agar were contaminated. NTM Elite agar showed a higher performance for rapidly growing mycobacteria (RGM) species than SP (7% versus 3%, P < 0.001). A trend has been noted for the Mycobacterium avium complex (4% with SP versus 3% with NTM Elite agar, P = 0.06). The time to positivity was similar (P = 0.13) between groups. However, the time to positivity was significantly shorter for the RGM in subgroup analysis (7 days with NTM and 6 days with SP, P = 0.01). NTM Elite agar has been shown to be useful for the recovery of NTM species, especially for the RGM. Using NTM Elite agar + Vitek MS system in combination with SP increases the number of NTM isolated from clinical samples.

Multicenter evaluation of the BIOFIRE Joint Infection Panel for the detection of bacteria, yeast, and AMR genes in synovial fluid samples.

The bioMérieux BIOFIRE Joint Infection (JI) Panel is a multiplex in vitro diagnostic test for the simultaneous and rapid (~1 h) detection of 39 potential pathogens and antimicrobial resistance (AMR) genes directly from synovial fluid (SF) samples. Thirty-one species or groups of microorganisms are included in the kit, as well as several AMR genes. This study, performed to evaluate the BIOFIRE JI Panel for regulatory clearance, provides data from a multicenter evaluation of 1,544 prospectively collected residual SF samples with performance compared to standard-of-care (SOC) culture for organisms or polymerase chain reaction (PCR) and sequencing for AMR genes. The BIOFIRE JI Panel demonstrated a sensitivity of 90.9% or greater for all but six organisms and a positive percent agreement (PPA) of 100% for all AMR genes. The BIOFIRE JI Panel demonstrated a specificity of 98.5% or greater for detection of all organisms and a negative percent agreement (NPA) of 95.7% or greater for all AMR genes. The BIOFIRE JI Panel provides an improvement over SOC culture, with a substantially shorter time to result for both organisms and AMR genes with excellent sensitivity/PPA and specificity/NPA, and is anticipated to provide timely and actionable diagnostic information for joint infections in a variety of clinical scenarios.

Multicenter evaluation of BioFire JI panel related to improved microbiological diagnostics on acute osteoarticular infections.

Microbiological diagnosis of osteoarticular infections (OI) is crucial for a successful treatment. A prospective multicenter study including 262 synovial fluids with suspicion of acute OI was performed between July 2021 and October of 2022. BioFire Joint Infection Panel multiplex-PCR test was performed and results were compared with conventional cultures of synovial fluid specimens. In total, 136 microorganisms were detected, and fourteen samples were positive for more than one microorganism. In monomicrobial infections (n = 87) agreement with culture was 69%. In 26 samples, the multiplex PCR yield an additional positive result when culture result was negative. It helped in the detection of fastidious microorganisms as K. kingae and N. gonorrhoeae. This multiplex PCR has proven to be a useful technique that can be used for patients with high suspicion of acute OI in a rapid and automated manner.

Meningoencephalitis due to Mycobacterium lentiflavum in an immunocompromised patient: Case report.

The first case of meningoencephalitis due to Mycobacterium lentiflavum in an immunocompromised patient is reported. Clinical and radiological characteristics are described, as well as the treatment and prognosis of the patient.

The Impact of Surgical Strategy and Rifampin on Treatment Outcome in Cutibacterium Periprosthetic Joint Infections.

BACKGROUND: Cutibacterium species are common pathogens in periprosthetic joint infections (PJI). These infections are often treated with ß-lactams or clindamycin as monotherapy, or in combination with rifampin. Clinical evidence supporting the value of adding rifampin for treatment of Cutibacterium PJI is lacking. METHODS: In this multicenter retrospective study, we evaluated patients with Cutibacterium PJI and a minimal follow-up of 12 months. The primary endpoint was clinical success, defined by the absence of infection relapse or new infection. We used Fisher's exact tests and Cox proportional hazards models to analyze the effect of rifampin and other factors on clinical success after PJI. RESULTS: We included 187 patients (72.2% male, median age 67 years) with a median follow-up of 36 months. The surgical intervention was a 2-stage exchange in 95 (50.8%), 1-stage exchange in 51 (27.3%), debridement and implant retention (DAIR) in 34 (18.2%), and explantation without reimplantation in 7 (3.7%) patients. Rifampin was included in the antibiotic regimen in 81 (43.3%) cases. Infection relapse occurred in 28 (15.0%), and new infection in 13 (7.0%) cases. In the time-to-event analysis, DAIR (adjusted hazard ratio [HR] = 2.15, P = .03) and antibiotic treatment over 6 weeks (adjusted HR = 0.29, P = .0002) significantly influenced treatment failure. We observed a tentative evidence for a beneficial effect of adding rifampin to the antibiotic treatment-though not statistically significant for treatment failure (adjusted HR = 0.5, P = .07) and not for relapses (adjusted HR = 0.5, P = .10). CONCLUSIONS: We conclude that a rifampin combination is not markedly superior in Cutibacterium PJI, but a dedicated prospective multicenter study is needed.

Synovial Fluid Mediated Aggregation of Clinical Strains of Four Enterobacterial Species.

Septic arthritis and prosthetic joint infection (PJI) are conditions commonly associated with Gram-positive cocci, however, a drastic increase in cases derived from enterobacterial species has been observed. Recently it has been reported by multiple groups that staphylococci rapidly form free-floating aggregates in the presence of synovial fluid. These aggregates are comparatively more resistant to antimicrobial challenge than their planktonic counterparts, and thus may play a role in the pathogenesis of joint infection. While staphylococcal aggregates have been the primary focus of interest in the field, it is unclear just how widespread synovial fluid mediated aggregation (SFMA) is in Gram negative enterobacteria (GNE). Through this work we have evaluated SFMA in clinical GNE isolated from PJIs. Two PJI clinical strains each of Enterobacter cloacae, Escherichia coli, Klebsiella pneumonia and Proteus mirabilis strains representing a range of antibiotic susceptibilities were exposed to 10% bovine synovial fluid supernatant (BSF) using a relatively simple, quick semi-quantitative method using an imaging plate reader. BSF stimulated aggregation within 0.5 h both strains of E. cloacae and P. mirabilis and one strain of E.coli. In one strain of P. mirabilis and E.coli, the size of the aggregates significantly increased from 0.5 to 2 h exposure. In contrast, neither K. pneumoniae strain aggregated in BSF. These preliminary findings show that aggregation can occur quickly in GNE, but the extent appears strain and species specific. Further work is required to assess the impact of SFMA on antibiotic tolerance, host innate immunity and the establishment of biofilms.

Cross-validation of the body appreciation scale-2: invariance across sex, body mass index, and age in Mexican adolescents.

Cross-validation is a useful strategy to address problems associated with the post hoc model fitting. The aim of this study was to cross-validate the BAS-2, in two samples (Calibration and Validation Samples), using an invariance testing strategy. 1127 Mexican adolescents (508 males and 619 females), aged 11-19 years (M = 15.41, SD = 2.30), allocated in two samples (n1 = 672; n2 = 455) completed the Mexican version of the BAS-2, along with other body image-related instruments. The cross-validation supported the generalizability of the one-factor respecified model of the BAS-2. The measure was invariant across body mass index and age, but not across sex. Internal consistency and test-retest reliability (a three-week period between each test) was excellent. In support of the validity of the BAS-2, it was positively associated with scores on body esteem, but negatively with body mass index, drive for thinness, and body dissatisfaction. Normal-weight and young adolescents groups showed higher body appreciation than excess-weight and late adolescents groups, respectively. Considering these findings, it is reasonable to conclude that the BAS-2 is a reliable and valid instrument to assess body appreciation in Mexican adolescents. LEVEL OF EVIDENCE: Level V, cross-sectional, descriptive study.

Antimicrobial Treatment Provides a Competitive Advantage to Mycobacterium abscessus in a Dual-Species Biofilm with Pseudomonas aeruginosa.

The physiological factors that contribute to Mycobacterium abscessus lung infections remain unclear. We determined whether antibiotic treatment targeting a major cystic fibrosis pathogen (i.e., Pseudomonas aeruginosa) could provide the ideal conditions for the establishment of M. abscessus infection. Our data showed that P. aeruginosa inhibited M. abscessus biofilm formation under control conditions and that antimicrobial therapy selectively targeting P. aeruginosa diminished this competitive interaction, thereby increasing M. abscessus survival.

Synergistic lethal mutagenesis of hepatitis C virus.

Lethal mutagenesis is an antiviral approach that consists in extinguishing a virus by an excess of mutations acquired during replication in the presence of a mutagenic agent, often a nucleotide analogue. One of its advantages is its broad spectrum nature that renders the strategy potentially effective against emergent RNA viral infections. Here we describe synergistic lethal mutagenesis of hepatitis C virus (HCV) by a combination of favipiravir (T-705) and ribavirin. Synergy has been documented over a broad range of analogue concentrations using the Chou-Talalay method as implemented in the CompuSyn graphics, with average dose reduction index (DRI) above 1 (68.02±101.6 for favipiravir, and 5.83±6.07 for ribavirin), and average combination indices (CI) below 1 (0.52±0.28). Furthermore, analogue concentrations that individually did not extinguish high fitness HCV in ten serial infections, when used in combination they extinguished high fitness HCV in one to two passages. Although both analogues display a preference for G→A and C→U transitions, deep sequencing analysis of mutant spectra indicated a different preference of the two analogues for the mutation sites, thus unveiling a new possible synergy mechanism in lethal mutagenesis. Prospects of synergy among mutagenic nucleotides as a strategy to confront emerging viral infections are discussed.

Microbiological and Cellular Evaluation of a Fluorine-Phosphorus-Doped Titanium Alloy, a Novel Antibacterial and Osteostimulatory Biomaterial with Potential Applications in Orthopedic Surgery.

Joint prosthesis failure is mainly related to aseptic loosening and prosthetic joint infections, both of which are associated with high morbidity and substantial costs for patients and health systems. The development of a biomaterial that is capable of stimulating bone growth while minimizing bacterial adhesion would reduce the incidence of prosthetic failure. We report antibacterial and osteostimulatory effects in a novel fluorine-phosphorus (F-P)-doped TiO2 oxide film grown on Ti-6Al-4V alloy with a nanostructure of bottle-shaped nanotubes (bNT) using five bacterial species (Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Pseudomonas aeruginosa, and Stenotrophomonas maltophilia) and MCT3T3-E1 osteoblastic cells. The interaction between the bacteria and bNT Ti-6Al-4V was complex, as the adhesion of four bacterial species decreased (two staphylococcus species, E. coli, and S. maltophilia), and the viability of staphylococci and S. maltophilia also decreased because of the aluminum (Al) released by bNT Ti-6Al-4V. This released Al can be recruited by the bacteria through siderophores and was retained only by the Gram-negative bacteria tested. P. aeruginosa showed higher adhesion on bNT Ti-6Al-4V than on chemically polished (CP) samples of Ti-6Al-4V alloy and an ability to mobilize Al from bNT Ti-6Al-4V. The cell adhesion and proliferation of MCT3T3-E1 osteoblastic cells significantly increased at 48 and 168 h, as did the matrix mineralization of these cells and the gene expression levels of three of the most important markers related to bone differentiation. According to our results, the bNT Ti-6Al-4V alloy could have clinical application, preventing infection and stimulating bone growth and thus preventing the two main causes of joint prosthesis failure.IMPORTANCE This work evaluates F-P-doped bNT Ti-6Al-4V from microbiological and cellular approaches. The bacterial results highlight that the antibacterial ability of bNT Ti-6Al-4V is the result of a combination of antiadhesive and bactericidal effects exerted by Al released from the alloy. The cell results highlight that F-P bNT Ti-6Al-4V alloy increases osseointegration due to modification of the chemical composition of the alloy resulting from P incorporation and not due to the nanostructure, as reported previously. A key finding was the detection of Al release from inside the bNT Ti-6Al-4V nanostructures, a result of the nanostructure growth during the anodizing process that is in part responsible for its bactericidal effect.

Parasitics Impact on the Performance of Rectifier Circuits in Sensing RF Energy Harvesting.

This work presents some accurate guidelines for the design of rectifier circuits in radiofrequency (RF) energy harvesting. New light is shed on the design process, paying special attention to the nonlinearity of the circuits and the modeling of the parasitic elements. Two different configurations are tested: a Cockcroft-Walton multiplier and a half-wave rectifier. Several combinations of diodes, capacitors, inductors and loads were studied. Furthermore, the parasitics that are part of the circuits were modeled. Thus, the most harmful parasitics were identified and studied in depth in order to improve the conversion efficiency and enhance the performance of self-sustaining sensing systems. The experimental results show that the parasitics associated with the diode package and the via holes in the PCB (Printed Circuit Board) can leave the circuits inoperative. As an example, the rectifier efficiency is below 5% without considering the influence of the parasitics. On the other hand, it increases to over 30% in both circuits after considering them, twice the value of typical passive rectifiers.

RF Energy Harvesting System Based on an Archimedean Spiral Antenna for Low-Power Sensor Applications.

This paper presents a radiofrequency (RF) energy harvesting system based on an ultrawideband Archimedean spiral antenna and a half-wave Cockcroft-Walton multiplier circuit. The antenna was proved to operate from 350 MHz to 16 GHz with an outstanding performance. With its use, radio spectrum measurements were carried out at the Telecommunication Engineering School (Universidad Politécnica de Madrid) to determine the power level of the ambient signals in two different scenarios: indoors and outdoors. Based on these measurements, a Cockcroft-Walton multiplier and a lumped element matching network are designed to operate at 800 MHz and 900 MHz frequency bands. To correct the frequency displacement in the circuit, a circuit model is presented that takes into account the different parasitic elements of the components and the PCB. With an input power of 0 dBm, the manufactured circuit shows a rectifying efficiency of 30%. Finally, a test is carried out with the full RF energy harvesting system to check its correct operation. Thus, the RF system is placed in front of a transmitting Vivaldi antenna at a distance of 50 cm. The storage capacitor has a charge of over 1.25 V, which is enough to run a temperature sensor placed as the load to be supplied. This demonstrates the validity of the RF energy harvesting system for low-power practical applications.

Non-Tuberculous Mycobacteria multispecies biofilms in cystic fibrosis: development of an in vitro Mycobacterium abscessus and Pseudomonas aeruginosa dual species biofilm model.

Lung disease in cystic fibrosis (CF) is characterized by the progressive colonization of the respiratory tract by different bacteria, which develop polymicrobial biofilms. In the past decades, there has been an increase in the number of CF patients infected with Non-Tuberculous Mycobacteria (NTM). Although Mycobacterium abscessus is the main NTM isolated globally, little is known about M. abscessus multispecies biofilm formation. In the present study we developed an in vitro model to study the phenotypic characteristics of biofilms formed by M. abscessus and Pseudomonas aeruginosa, a major pathogen in CF. For that purpose, dual species biofilms were grown on polycarbonate membranes with a fixed concentration of P. aeruginosa and different inoculums of M. abscessus. The biofilms were sampled at 24, 48, and 72 h and bacteria were quantified in specific media. The results revealed that the increasing initial concentration of M. abscessus in dual species biofilms had an effect on its population only at 24 and 48 h, whereas P. aeruginosa was not affected by the different concentrations used of M. abscessus. Time elapsed increased biofilm formation of both species, specially between 24 and 48 h. According to the results, the conditions to produce a mature dual species biofilm in which the relative species distribution remained stable were 72 h growth of the mixed microbial culture at a 1:1 ratio. A significant decrease in mycobacterial population in dual compared to single species biofilms was found, suggesting that P. aeruginosa has a negative influence on M. abscessus. Finally, in a proof of concept experiment, young and mature dual species biofilms were exposed to clarithromycin.

Evaluation of the use of sonication of retrieved implants for the diagnosis of prosthetic joint infection in a routine setting.

In order to evaluate the usefulness of sonication of retrieved implants for the diagnosis of prosthetic joint infection (PJI) in a large group of patients in a routine setting, we designed a 3-year retrospective study. Patients were classified into two groups: those meeting the clinical criteria of PJI and those that did not (control group). Two hundred patients and 276 samples were included. The types of infection were early (n = 44), delayed (n = 53), positive intraoperative cultures (n = 13) and late-acute (n = 8). The culture sensitivities of sonicate fluid, periprosthetic tissue, synovial fluid and combination of periprosthetic tissue and/or synovial fluid were 69.5, 52.8, 54.8 and 60.2%, respectively. The specificities were 97.6, 90.3, 93.0 and 89.9%, respectively. Sonicate fluid culture of implants was more sensitive than peri-implant tissue, synovial fluid and combination of periprosthetic tissue and/or synovial fluid for all infection types, though it was especially useful in delayed infection: 91.3% vs. 60.0% (p = 0.0015), 63.2% (p = 0.0005) and 66.7% (p = 0.0001), respectively. When sonicate fluid culture of implants was performed in addition to conventional cultures, the sensitivity increased significantly in total (from 60.2 to 77.1%) and delayed PJI (from 45.1 to 71.7%). On the other hand, for early PJI, sonicate fluid culture of prosthesis was not superior to conventional diagnostic methods.

Antibiotic release from F-doped nanotubular oxide layer on TI6AL4V alloy to decrease bacterial viability.

We aimed to evaluate the release of two antibiotics: gentamicin and vancomycin loaded into F-doped nanotubular anodic oxide layers, as well as their bactericide effect. F-doped nanotubular oxide layers fabricated on Ti-6Al-4V loaded with gentamicin (Gm), vancomycin (Vm) and their mixture (Gm + Vm) by a previously described loading method. Antibiotic release was studied by RP-HPLC and by a biological method. Bactericidal activity was evaluated by a bacterial adherence protocol described previously using on three clinically important bacterial species. The antibiotic release steady up to 120 and 180 min for Gm and Vm, respectively, and despite the antibiotic concentration decreased, their biological activity was maintained over time. The number of living bacteria of three species tested on NT-Gm specimens was significantly lower than on NT specimens without antibiotics (P < 0.01). There are significant differences among NT-Gm and NT-Gm + Vm specimens (P < 0.05) for S. aureus 15981, S. epidermidis ATCC 35984, and P. aeruginosa ATCC 27853 and no differences between NT-Vm and NT-Gm + Vm for staphylococci (P > 0.05). In conclusion, this Gm + Vm loading method added to the properties of F-doped nanotubular oxide layers fabricated on Ti-6Al-4V, and therefore surfaces with antibacterial, biocompatible, tissue integration stimulating and spread-spectrum bactericidal properties can be obtained.

Psychometric evaluation of the muscle appearance satisfaction scale in a Mexican male sample.

PURPOSE: The purpose of this study was to determine whether the muscle appearance satisfaction scale (MASS) shows acceptable psychometric properties in Mexican bodybuilders. METHODS: A total of 258 Mexican male bodybuilders were recruited. Two self-report questionnaires, including the MASS and drive for muscularity scale (DMS), were administered. Six models of the latent structure of the MASS were evaluated, using confirmatory factor analysis with maximum likelihood, considering robust Satorra-Bentler correction to estimate the fit of the models to the data. RESULTS: Similar to the original MASS, the series of CFA confirmed that the Mexican version was well represented with the 17-item five-factor structure, which showed a good model fit [Satorra-Bentler Chi-square (109, n = 258) = 189.18, p < 0.0001; NNFI = 0.91; CFI = 0.93; IFI = 0.93; RMSEA = 0.05 (0.04, 0.07)]. Internal consistency was estimated with McDonald's omega, which was acceptable for the MASS (0.88), and their subscales (0.80 to 0.89), except for muscle checking scale (0.77). Test-retest reliability analysis showed stability of the MASS total as well as of the subscale scores over a 2-week period (intraclass correlation coefficients = 0.75-0.91). Construct validity was demonstrated by a significant positive correlation between MASS and DMS results (r = 0.75; p = 0.0001). These results were similar to those of previous studies, which demonstrate the scale's usefulness. CONCLUSIONS: Our results support the suitability of the MASS and its subscales to measure muscle dysmorphia symptoms in Mexican male bodybuilders.