Gamma irradiation delays tomato (Solanum lycopersicum) ripening by inducing transcriptional changes.

BACKGROUND: Tomato (Solanum lycopersicum) has a relatively short shelf life as a result of rapid ripening, limiting its transportability and marketability. Recently, gamma irradiation has emerged as a viable method for delaying tomato fruit ripening. Although few studies have shown that gamma irradiation delays the ripening of tomatoes, the underlying mechanism remains unknown. Therefore, the present study aimed to examine the effects of gamma irradiation on tomato fruit ripening and the underlying mechanisms using transcriptomics. RESULTS: Following gamma irradiation, the total microbial count, weight loss, and decay rate of tomatoes significantly reduced during storage. Furthermore, the redness (a*), color change (∆E), and lycopene content of gamma-irradiated tomatoes decreased in a dose-dependent manner during storage. Moreover, gamma irradiation significantly upregulated the expression levels of genes associated with DNA, chloroplast, and oxidative damage repairs, whereas those of ethylene and auxin signaling-, ripening-, and cell wall metabolism-related, as well as carotenoid genes, were downregulated. CONCLUSION: Gamma irradiation effectively delayed ripening by downregulating the expression of ripening-related genes and inhibiting microbial growth, which prevented decay and prolonged the shelf life of tomatoes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Optimization of spray drying process of Japanese apricot (Prunus mume Sieb. et Zucc.) juice powder using nondigestible maltodextrin by response surface methodology (RSM).

The optimal spray-drying conditions for manufacturing Japanese apricot (Prunus mume Sieb. et Zucc.) juice powder (JAJP) using response surface methodology (RSM) were investigated. The optimization was performed using two independent factors, which are inlet air temperature (130-180 °C) and different concentrations of nondigestible maltodextrin (NMD) as a carrier agent (10-30%). Responses such as drying yield, moisture content, water solubility index (WSI), bulk density, color, pH, and antioxidant activities of JAJP were investigated. Moisture content, vitamin C content, color, antioxidant activity, pH and bulk density were greatly influenced by inlet air temperature, but dry yield and WSI were only significantly affected by NMD concentration. The optimum spray drying conditions were determined as 14.7% NMD concentration and 154.5 °C inlet air temperature, respectively. At these optimum conditions, a drying yield of 55.73%, 4.84% moisture content, 90.98% WSI, 0.59 g/mL of bulk density, and 169.87 mg/g vitamin C content in JAJP were measured. Therefore, JAJP with the desirable physicochemical properties could be produced.

Influence of Enzymatic Hydrolysis and Molecular Weight Fractionation on the Antioxidant and Lipase / α-Amylase Inhibitory Activities In Vitro of Watermelon Seed Protein Hydrolysates.

This study aims to evaluate the potential in vitro antioxidant and anti-obesity activities of watermelon seed protein hydrolysates (WSPH) obtained using different combinations of enzymes alcalase−proteinase K (ALC-PK) and alcalase−actinidin (ALC-ACT). There was a direct relationship between the degree of hydrolysis (DH) and the biological activities of the WSPH, with the highest DPPH (approximately 85%) and lipase inhibitory activities (≈59%) appreciated at DH of 36−37% and 33−35% when using ALC-PK and ALC-ACT, respectively. Following molecular weight fractionation, the ALC-PK WSPH < 3 kDa (F1) assayed at 1 mg.mL−1 had the highest DPPH-radical scavenging (89.22%), ferrous chelating (FC) (79.83%), reducing power (RP) (A 0.51), lipase inhibitory (71.36%), and α-amylase inhibitory (62.08%) activities. The amino acid analysis of ALC-PK WSPH and its fractions revealed a relationship between the biological activity of the extracts and their composition. High contents of hydrophobic amino acids, arginine, and aromatic amino acids were related to high antioxidant, lipase inhibitory, and α-amylase inhibitory activities in the extracts, respectively. Overall, this study revealed that underutilized protein sources such as WSPH, using the appropriate combination of enzymes, could result in the generation of new ingredients and compounds with powerful antioxidant and anti-obesity activities with promising applications as nutraceuticals or functional foods.

Protein degradation and texture properties of skate (Raja kenojei) muscle during fermentation.

This study aimed at providing new insights into protein degradation and associated textural properties of skate (Raja kenojei) muscles. The pH and ammonia content of skate muscle were found to increase with an increase in fermentation time. During the initial phase of fermentation, the skate muscle hardened prior to demonstrating a spike in its pH and ammonia content. Protein characterization of the skate myofibrils revealed that the high proteins degraded into low molecular peptides, resulting in an increase in the hydrophobic interactions of these myofibrillar protein during fermentation. Consequently, the springiness of the skate muscles significantly (p < 0.05) decreased. Consequently, the textural profile of skate muscle during fermentation has a strong correlation with fermentation time and protein degradation.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review.

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Quantification of spinosyn A and spinosyn D in animal-derived products using multiwalled carbon nanotubes coupled with LC-MS/MS for analysis.

An analytical method was developed for the quantification of spinosad (sum of spinosyns A and D) in five animal-derived products (chicken breast, pork, beef, egg, and milk) using LC-MS/MS. The sample was extracted using acetonitrile/1% acetic acid and a combination of magnesium sulfate and sodium acetate salts. The sample was purified using multiwalled carbon nanotubes as sorbent via a dispersive-solid-phase extraction procedure. Matrix-matched calibration (seven-point) provided good linearity with coefficient of determination (R2 ) ≥0.99 for each product. The limits of detection and quantification (LOQs) ranged between 0.0003-0.03 and 0.001-0.1 mg/kg, respectively. Method validation was carried out after spiking the target standard to blank matrices at the concentration levels of LOQ, 2 × LOQ, and 10 × LOQ with three replicates for each. The average recoveries were between 74 and 104%, with relative standard deviations ≤9.68, which were within the acceptable range designated by the international organizations. The developed method was successfully applied for monitoring market samples collected throughout the Korean Peninsula, and none of the samples tested positive for the target analytes. It has therefore been shown that dehydration and acidification were effective to extract spinosad from animal-derived products.

Effects of superfine grinding using ball-milling on the physical properties, chemical composition, and antioxidant properties of Quercus salicina (Blume) leaf powders.

BACKGROUND: Quercus salicina (Blume) leaves are traditionally used as folk medicine in some Asian countries. The aim of this study was to evaluate the effects of ball milling for different periods (0, 6, 12, 18, and 24 h) on the physicochemical properties of superfine Quercus salicina (Blume) leaf (QSL) powders. RESULTS: The particle sizes, water-holding capacity, angle of repose, and redness of the superfine QSL powder decreased with increasing ball-milling times, whereas the water solubility index, bulk density, tapped density, brightness, and yellowness were found to increase. Significantly higher (P > 0.05) total phenolic and flavonoid contents, and antioxidant activities, were observed for the superfine QSL powders obtained after 24 h ball-milling time. A total of 12 phenolic compounds in free and cell-wall-bound forms were quantified in the superfine QSL powder. Free phenolics such as protocatechuic acid, caffeic acid, rutin, and p-coumaric acid were increased and all cell-wall-bound phenolics were decreased with increasing ball-milling times. The antioxidant activity of the free phenolics increased with increasing ball-milling times, and the cell-wall-bound forms decreased. CONCLUSION: Superfine grinding by ball milling for 24 h can thus be used to produce superfine QSL powder with higher free phenolic metabolite content and antioxidant activity, and improved water solubility index, color, bulk, and tapped densities. This study will be useful for the food / nutraceutical / pharmaceutical industries in the manufacturing of active food ingredients or value-added products using QSL powders. © 2020 Society of Chemical Industry.

Removal of astringency in persimmon fruits (Diospyros kaki) subjected to different freezing temperature treatments.

The effects of two different freezing temperatures (- 20 °C and - 80 °C) on the astringency trait of persimmon fruits during 15 to 60 days of storage were investigated. The levels of soluble and insoluble tannins, proanthocyanidins and other physicochemical characteristics were evaluated. Storage at - 20 °C and - 80 °C temperatures up to 60 days has been found to be an effective method to remove astringency of persimmon fruits. Proanthocyanidin concentration was negligible at both temperatures during storage. Total soluble solid contents were decreased as 3.34 from 4.59 (mg/g DW) whereas, insoluble tannin contents were increased as 20.30 from 16.45 (mg/g DW) by freezing temperatures treatment during storage. Comparatively, higher soluble tannin content 11.68 (mg/g DW) and lower insoluble tannin content 10.02 (mg/g DW) was observed in control (day 0). Therefore, the astringency of persimmon fruits incubated at - 20 °C and - 80 °C was markedly reduced and after 15 up to 60 days of storage, the astringent taste virtually disappeared. The proanthocyanidin contents were decreased as 0.02 from 0.52 (mg/g DW) at - 20 °C storage and 0.17 from 0.47 (mg/g DW) at - 80 °C storage, in comparison with the control 2.65 (mg/g DW). The moreover, along with the removal of astringency, other physicochemical parameters including color, pH, moisture content, total soluble solid, and sensory attributes were also conserved on freezing at both the temperatures. These findings suggest that freezing temperature treatments aid the removal of astringency from persimmon fruits which could be used in different food preparations or as supplements.

A review of encapsulation of carotenoids using spray drying and freeze drying.

Carotenoids are potent antioxidants, but they are highly unstable and susceptible during processing and storage. Encapsulation technologies protect against degradation and are capable of releasing individual or combination of bioactive substances during processing as well as development of various functional food products. Moreover, encapsulating agents can be used to increase the stability of carotenoids and form a barrier between the core and wall materials. Suitable encapsulating agents, temperature, and drying methods are the most important factors for the encapsulation process. In this report, we reviewed the current status of encapsulation of carotenoids from different fruits, vegetables, spices, seaweeds, microorganisms, and synthetic sources using various types of encapsulating agents through spray drying and freeze drying. We also focused on the degradation kinetics and various factors that affect the stability and bioavailability of encapsulated carotenoids during their processing and storage.

Physicochemical characteristics and isoflavones content during manufacture of short-time fermented soybean product (cheonggukjang).

Changes in physicochemical properties, isoflavone composition, antioxidant activities, and microbial count of cheonggukjang during the manufacturing process were investigated. During fermentation, isoflavone glucosides are converted to isoflavone aglycones. After fermentation, the increased isoflavone aglycone content was determined. The total phenolic and total flavonoid content, as well as antioxidant activities, significantly increased in cheonggukjang at fermentation process. In proximate composition, fermented soybeans had the highest crude protein content. A gradual increase in the browning index and pH values was observed from the primary processing procedure to fermentation. The total bacterial count increased with each manufacturing step, except for the steamed step. The traditional processing methods for cheonggukjang from raw soybean induced several changes in chemical composition. In addition, the change of isoflavone glucosides to isoflavone aglycones during fermentation could enhance their bioavailability and antioxidant properties.

Physicochemical, antioxidant, microstructural, and sensory properties of sesame bars sweetened with pear juice concentrate.

Pear juice concentrate (PJC) can be used as a natural sweetener in various processed foods. In this study, sesame bars were manufactured by adding PJC and rice syrup at mixing ratios of 0:30 (G-0), 1:29 (G-1), 3:27 (G-3), and 5:25 (G-5), and the bars were investigated for their physiochemical properties, antioxidants, morphology, and sensory attributes. Addition of PJC at more than 3% increased a* and b* values of bars, decreased cohesiveness, hardness, and compactness, and made the bars malleable. Antioxidants, sugars, and organic acids in the sesame bars increased significantly with a corresponding increase in PJC level from 1 to 5%. Prominent changes in functional groups and corresponding spectral characteristics were observed in sesame bars with 5% PJC. Lower PJC levels produced a compacted morphology, bars with more than 5% PJC exhibited a dented structure. Based on the sensory properties, sesame bars with PJC (3%) showed excellent overall acceptability.

Effect of Ultrasound-Assisted Extraction of Moringa stenopetala Leaves on Bioactive Compounds and Their Antioxidant Activity.

Moringa stenopetala is a multipurpose plant having high nutritional and medicinal values. The aim of this study is to evaluate the effect of time and temperature of ultrasound-assisted extraction on bioactive compounds and antioxidant activities of M. stenopetala leaf extract. The ultrasound-assisted extraction took place at each of 30, 40 and 50 °C for 10, 20 and 30 min. The study also included the analysis of the interaction effects of time and temperature on the total phenolic content, total flavonoid content, antioxidant activity (ABTS and DPPH assay), FRAP and chelating activity. The highest total phenolic content, expressed in mg gallic acid equivalents per g dry mass, was 46.6 and total flavonoid content, expressed in mg catechin equivalents per g dry mass, was 20.4 at 40 °C for 20 min. Under the same conditions, the highest antioxidant activities evaluated by DPPH, ABTS and FRAP, expressed in mg Trolox equivalents per g dry mass, were 336.5, 581.8 and 133.3 respectively, and chelating activity, expressed in mg EDTA equivalents per g dry mass, was 28.4. The lowest amounts of bioactive compounds and antioxidant activities were observable when the extraction occurred at 50 °C for 30 min, followed by the extraction at lower temperature (30 °C) for shorter time (10 min). The morphological analysis of the residues obtained after extraction using scanning electron microscope indicated that there was a higher ultrasonic destruction of the structural components of the sample at longer extraction time. Therefore, ultrasound-assisted extraction at a temperature of 40 °C for 20 min is the best time-temperature combination to extract bioactive compounds from M. stenopetala leaves.

Effects of ultrasonication, agitation and stirring extraction techniques on the physicochemical properties, health-promoting phytochemicals and structure of cold-brewed coffee.

BACKGROUND: Ultrasonication, agitation and stirring or a combination of ultrasonication, agitation and stirring extraction techniques were applied to observe their effects on the physicochemical properties, health-promoting phytochemicals, and structure of cold brewed coffee. RESULTS: All the extraction techniques led to significant (P < 0.05) increases in the color values, total soluble solids, antioxidant activities and most organic acids, while a combination of extraction techniques increased the chlorogenic acid and caffeine content significantly (P < 0.05) compared with that by conventional methods. Fourier transform infrared spectroscopy allowed us to identify the different compounds in the cold-brewed coffee extract rapidly. The partial least square regression model presented good predictability because experimental and predicted values were close to each other. Principal component analysis revealed that levels of all phytochemicals correlated with the use of non-conventional methods. CONCLUSION: The combination of ultrasonication and agitation might be the best option to enhance the various phytochemicals in cold-brewed coffee. © 2018 Society of Chemical Industry.

Comparison of freeze-drying and hot air-drying on Asian pear (Pyrus pyrifolia Nakai 'Niitaka') powder: changes in bioaccessibility, antioxidant activity, and bioactive and volatile compounds.

The bioaccessibility, antioxidant activity, and bioactive and volatile compounds of freeze-dried Asian pear powder (FDAPP) and hot air-dried Asian pear powder (HDAPP) were investigated. Compared to FDAPP, HDAPP exhibited significantly (p < 0.05) higher total phenolic, arbutin, and bioaccessible phenolic contents and the ferric reducing ability of plasma for the free phenolic fraction. However, all antioxidant activities for the bound phenolic fraction were lower in HDAPP, which could contribute to the release of bound antioxidant components due to cell rupture in the HDAPP. Based on the volatile profile, hot air drying provided a sweet as well as attractive flavor in the Asian pear powder (APP). Considering economic viability, higher levels of bioactive compounds, and desirable aromatic properties, hot air drying is the better option compared to freeze-drying for APP production, which could be used as a functional ingredient in food products.

Influence of extraction parameters and stability of betacyanins extracted from red amaranth during storage.

Natural colorants are important alternatives to synthetic colorants. They are considered harmless and positively affect biological activities owing to their antioxidant potential. The present study deals with the assessment of the extraction processes and the effects of pH (1.0, 3.0, and 5.0), extraction media (water and 50% ethanol) and storage condition (ambient and refrigeration) on betacyanin content, color values, as well as degradation kinetics of total betacyanins in red amaranth. Betacyanin content was more stable at higher than at lower pH. The degradation rate constant (K) was higher and the half-life (t1/2) was lower at ambient temperature compared to refrigeration temperature. Betacyanin degradation was higher at ambient temperature (30 ± 2 °C) than at refrigeration temperature (4 °C). The pH, storage time, and temperature affected the stability of the color attributes. Therefore, this work suggests that water and lower temperature (4 °C) could be applied to extract more betacyanins from red amaranth and betacyanins might be used as an alternative to synthetic color.

Flavonoids in fruits and vegetables after thermal and nonthermal processing: A review.

Consumers currently demand more nutritious food, which is minimally processed and naturally produced. Flavonoids are one of the major plant metabolites found throughout the plant kingdom, especially in fruits and vegetables. Flavonoids exert tremendous positive effects on health and protect against various diseases. Fruits and vegetables are difficult to store for a long period, owing to their perishable nature even at low temperatures. Therefore, processing is necessary to prolong their shelf lives and increase nutritional values. Thermal processing has been used in the food sector since ancient times. However, nonthermal processing has become more attractive to consumers and product developers recently, owing to the retention of beneficial health properties after nonthermal processing. The present review will address the effects of thermal and nonthermal processing methods such as blanching, drying, high-pressure processing, ultrasound, pulsed electric field, and ultraviolet irradiation on total and individual flavonoid content in fruits and vegetables. In addition, this text will elucidate the stability characteristics as well as bioavailability, cytotoxicity, and transformations of flavonoids during thermal and nonthermal treatments.

Isolation and identification of hyper-ammonia-producing bacteria from commercial fermented skates (Raja kenojei).

Ammonia-producing bacteria were isolated and identified from five commercial fermented skates (A1, A2, A3, A4, and A5). In addition, the pH, ammonia nitrogen, total volatile nitrogen (TVBN), trimethylamine nitrogen (TMAN), and amino nitrogen contents of skate samples were also determined. A total of 88 strains of ammonia-producing bacteria was isolated and seven hyper-ammonia-producing bacteria isolates (A2-2, A2-3, A2-12, A2-18, A2-20, A3-6 and A3-14) were selected based on ammonia nitrogen producing ability. Those isolates were identified as Proteus hauseri (three strains), Providencia rustigianii (three strains), and Kurthia gibsonii. The pH and ammonia nitrogen content in skate samples were ranged from 8.63 to 9.03, and 4.86 to 7.31 g/kg, respectively. No significant difference of pH values was observed in skate samples A2, A3, A4 and A5. While, skate samples A3, A4 and A5 showed similar level of TVBN and TMAN content. Skate sample A2 showed the highest amino nitrogen content among all samples, which indicated the highest degree of protein degradation of skate muscle during fermentation. Bivariate cluster analysis showed that skate samples A3, A4, and A5 clustered together at a relatively high level, implying a similar microbial environment during fermentation. The cluster analysis allowed different commercial fermented skates to be clearly differentiated based on the characteristics determined in this study. This study can provide important information for investigating the mechanisms underlying ammonia flavor formation in skate muscle during fermentation.

Marine carotenoids: Bioactivities and potential benefits to human health.

Among natural pigments, carotenoids play important roles in physiological functions. The characteristics of carotenoids and their effects on human health have been reported for a long time, but most studies have focused on carotenoids from vegetables, fruits, and other parts of higher plants. Few reports are available on carotenoids from marine sources, such as seaweeds, microalgae, and marine animals, which have attracted attention in recent decades. Hundreds of carotenoids have been identified and isolated from marine organisms and their beneficial physiological functions, such as anticancer, antiobesity, antidiabetic, anti-inflammatory, and cardioprotective activities have been reported. The purpose of this review is to discuss the literature on the beneficial bioactivities of some of the most abundant marine carotenoids, including fucoxanthin, astaxanthin, cantaxanthin, peridinin, fucoxanthinol, and halocynthiaxanthin.

Development of a Sequential Injection Analysis System for the Determination of Saccharin.

Saccharin is a powerfully sweet nonnutritive sweetener that has been approved for food-processing applications within the range of 100-1200 mg/kg. A simple, rapid, and cost-effective sequential injection analysis (SIA) technique was developed to determine the saccharin level. This method is based on the reaction of saccharin with p-chloranil in an ethanol medium with a hydrogen peroxide (H2O2) acceleration, and the resultant violet-red compound was detected using a UV-Vis spectrophotometer at λmax = 420 nm. To ascertain the optimal conditions for the SIA system, several parameters were investigated, including buffer flow rate and volume, p-chloranil concentration, and reactant volumes (saccharin, p-chloranil, and H2O2). The optimum setup of the SIA system was achieved with a buffer flow rate, buffer volume, and draw-up time of 1.2 mL/min, 2900 µL, and ~145 s, respectively. The optimal p-chloranil concentration is 30 mM, and the best reactant volumes, presented in an ordered sequence, are as follows: 30 µL of H2O2, 450 µL of saccharin, and 150 µL of p-chloranil. The optimized SIA configuration produced a good linear calibration curve with a correlation coefficient (R² = 0.9812) in the concentration range of 20-140 mg/L and with a detection limit of 19.69 mg/L. Analytical applications in different food categories also showed acceptable recovery values in the range of 93.1-111.5%. This simple and rapid SIA system offers great feasibility for the saccharin quality control in food-product processing.

Color, bioactive compounds and morphological characteristics of encapsulated Asian pear juice powder during spray drying.

Encapsulated Asian pear juice powder was produced through spray drying using three maltodextrin levels (15, 20, and 25% w/v) and three inlet air temperatures (130, 150, and 170 °C). The impact of maltodextrin concentrations and inlet air temperatures on color, bioactive compounds, and morphological characteristics of encapsulated Asian pear juice powder were investigated. Maltodextrin concentrations and inlet air temperatures significantly influenced L* and b* values of encapsulated Asian pear juice powder. Increasing inlet air temperatures increased total phenolic content, whereas the vitamin C content decreased. Vitamin C content was strongly correlated with particle size, inlet air temperature, and maltodextrin concentration. ABTS+ radical-scavenging activity was highly correlated with total phenol content while DPPH radical-scavenging activity was highly correlated with vitamin C content. Encapsulated powders made with higher inlet air temperature and higher maltodextrin concentration had lowest median particle diameter with a smoother, more regular and rounded outer surface than those of encapsulated powders produced with lower inlet air temperature and lower maltodextrin concentration. Therefore, the results demonstrate that high-quality encapsulated Asian pear juice powder could be manufactured by adding 15% (w/v) maltodextrin and spray-drying at 170 °C.