RESUMEN
Standard silicon photonic strip waveguides offer a high intrinsic refractive index contrast; this permits strong light confinement, leading to compact bends, which in turn facilitates the fabrication of devices with small footprints. Sub-wavelength grating (SWG) based waveguides can allow the fabrication of low loss devices with specific, engineered optical properties. The combination of SWG waveguides with optical micro-resonators can offer the possibility of achieving resonators with properties different from the traditional SOI rings. One important property that SWG rings can offer is decreased light confinement in the waveguide core; this improves the resonator's sensitivity to changes in the cladding refractive index, making the rings ideal for refractive index sensing applications. In this paper, we present the design and experimental characterization of SWG based rings realized on SOI chips without upper cladding (permitting their use as sensors). The fabricated rings offer quality factors in the range of ~1k-6k, depending on SWG parameters. Based on the comparison of experimental and simulated data we expect sensitivities exceeding 383 nm/RIU in water and 270 nm/RIU in air, showing excellent potential for use in sensing applications.
RESUMEN
A resonance-enhanced, defect-mediated, ring resonator photodetector has been implemented as a single unit biosensor on a silicon-on-insulator platform, providing a cost effective means of integrating ring resonator sensors with photodetectors for lab-on-chip applications. This method overcomes the challenge of integrating hybrid photodetectors on the chip. The demonstrated responsivity of the photodetector-sensor was 90 mA/W. Devices were characterized using refractive index modified solutions and showed sensitivities of 30 nm/RIU.
Asunto(s)
Técnicas Biosensibles/instrumentación , Óptica y Fotónica/instrumentación , Silicio/química , ElectricidadRESUMEN
This work presents simulation and experimental results of ultra-thin optical ring resonators, having larger Evanescent Field (EF) penetration depths, and therefore larger sensitivities, as compared to conventional Silicon-on-Insulator (SOI)-based resonator sensors. Having higher sensitivities to the changes in the refractive indices of the cladding media is desirable for sensing applications, as the interactions of interest take place in this region. Using ultra-thin waveguides (<100 nm thick) shows promise to enhance sensitivity for both bulk and surface sensing, due to increased penetration of the EF into the cladding. In this work, the designs and characterization of ultra-thin resonator sensors, within the constraints of a multi-project wafer service that offers three waveguide thicknesses (90 nm, 150 nm, and 220 nm), are presented. These services typically allow efficient integration of biosensors with on-chip detectors, moving towards the implementation of lab-on-chip (LoC) systems. Also, higher temperature stability of ultra-thin resonator sensors were characterized and, in the presence of intentional environmental (temperature) fluctuations, were compared to standard transverse electric SOI-based resonator sensors.
RESUMEN
Wavelength-division-multiplexing (WDM) networks with wide channel grids and bandwidths are promising for low-cost, low-power optical interconnects. Wide-bandwidth, single-band (i.e., no free-spectral range) add-drop filters have been developed on silicon using anti-reflection contra-directional couplers with out-of-phase Bragg gratings. Using such filter components, we demonstrate a 4-channel, coarse-WDM demultiplexer with flat passbands of up to 13 nm and an ultra-compact size of 1.2 × 10(-3) mm(2).
Asunto(s)
Refractometría/instrumentación , Silicio/química , Resonancia por Plasmón de Superficie/instrumentación , Telecomunicaciones/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , MiniaturizaciónRESUMEN
Optical methods are one of the painless and promising techniques that can be used for blood glucose predictions for diabetes patients. The use of thermally tunable vertical cavity surface-emitting lasers (VCSELs) as the light source to obtain blood absorption spectra, along with the multivariate technique partial least squares for analysis and glucose estimation, has been demonstrated. With further improvements by using data preprocessing and two VCSELs, we have achieved a clinically acceptable level in the physiological range in buffered solutions. The results of previous experiments conducted using white light showed that increasing the number of wavelength intervals used in the analysis improves the accuracy of prediction. The average prediction error, using absorption spectra from one VCSEL in aqueous solution, is about 1.2 mM. This error is reduced to 0.8 mM using absorption spectra from two VCSELs. This result confirms that increasing the number of VCSELs improves the accuracy of prediction.