Genetic analysis of cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda.

cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda, consists of three binding sites (called R3, R2 and R1) for gpNu1, the small subunit of terminase; and I1, a binding site for integration host factor (IHF), the DNA bending protein of Escherichia coli. cosB is located between cosN, the site where terminase introduces staggered nicks to generate cohesive ends, and the Nu1 gene; the order of sites is: cosN-R3-I1-R2-R1-Nu1. A series of lambda mutants have been constructed that have single base-pair C-to-T transition mutations in R3, R2 and R1. A single base-pair transition mutation within any one of the gpNul binding sites renders lambda dependent upon IHF for plaque formation. lambda phage with mutations in both R2 and R3 are incapable of plaque formation even in the presence of IHF. Phages that carry DNA insertions between R1 and R2, from 7 to 20 base-pairs long, are also IHF-dependent, demonstrating the requirement for a precise spacing of gpNu1 binding sites within cosB. The IHF-dependent phenotype of a lambda mutant carrying a deletion of the R1 sequence indicates that IHF obviates the need for terminase binding to the R1 site. In contrast, a lambda mutant deleted for R2 and R1 fails to form plaques on either IHF+ or IHF- cells, indicating terminase binding of R2 is involved in suppression of R mutants by IHF. A fourth R sequence, R4, is situated on the left side of cosN; a phage with a mutant R4 sequence shows a reduced burst size on both an IHF+ and an IHF- host. The inability of the R4- mutant to be suppressed by IHF, plus the fact that R4 does not bind gpNu1, suggests R4 is not part of cosB and may play a role in DNA packaging that is distinct from that of cosB.

Genetic analysis of mutations affecting terminase, the bacteriophage lambda DNA packaging enzyme, that suppress mutations in cosB, the terminase binding site.

Terminase, the DNA packaging enzyme of phage lambda, binds to lambda DNA at a site called cosB, and introduces staggered nicks at an adjacent site, cosN, to generate the cohesive ends of virion lambda DNA molecules. Terminase also is involved in separation of the cohesive ends and in binding the prohead, the empty protein shell into which lambda DNA is packaged. Terminase is a DNA-dependent ATPase, and both subunits, gpNu1 and gpA, have ATPase activity. cosB contains a series of gpNu1 binding sites, R3, R2 and R1; between R3 and R2 is a binding site, I1, for integration host factor (IHF), the Escherichia coli DNA bending protein. In this work, a series of mutations in Nu1 have been isolated as suppressors of cosB mutations. One of the Nu1 mutations is identical to the previously described Nu1ms1/ohm1 mutation predicted to cause the change L40F in the 181 amino acid-long gpNu1. Three other Nu1 missense mutations, the Nu1ms2 (L40I), ms3 (Q97K) and ms4 (A92G) mutations, have been isolated; the relative strengths of suppression of cosB mutations by the Nu1ms mutations are: ms1 > ms2 > ms3 > ms4. The Nu1 missense mutations all affect amino acid residues that lie outside of the putative helix-turn-helix DNA binding motif of gpNu1. The Nu1ms1 and Nu1ms2 mutations alter an amino acid residue (L40) that lies directly between two segments of gpNu1 proposed to be involved in ATP binding and hydrolysis; thus these mutations are likely to alter the gpNu1 ATP-binding site. The Nu1ms3 and Nu1ms4 mutations both affect amino acid residues in the central region of gpNu1 that is predicted to form a hydrophilic alpha-helix. To explain how the Nu1ms mutations suppress cosB defects, models involving alterations of the DNA binding and/or catalytic properties of terminase are considered. The results also indicate that terminase occupancy of a single gpNu1 binding site (R3) is necessary and sufficient for the efficient initiation of DNA packaging; the Nu1ms1, ms2 and ms3 mutations permit IHF-independent plaque formation by a phage lacking R2 and R1.

Termination of packaging of the bacteriophage lambda chromosome: cosQ is required for nicking the bottom strand of cosN.

Termination of packaging of the lambda chromosome involves completion of translocation of the DNA into the head shell, and conversion of the translocation complex into a cleavage complex. The cleavage reaction introduces staggered nicks into the downstream cosN to generate the right cohesive end of the chromosome. cosQ, a site adjacent to cosN, was found to be required for nicking the bottom strand of cosN; bottom strand nicking was also sequence-specific for bps at the nick site. Nicking of the top strand of cosN (cosNL) was stimulated by cosQ, but fidelity and efficiency of cosNL nicking were largely dictated by other cos subsites (i.e. cosB and I2). Aberrant top-strand cleavage within cosQ was observed in the absence of I2, and nicking at a site 8 nt 5' to the normal cosNL nick site occurred in the absence of cosB. The presence of cosQ was found to be insufficient to arrest DNA translocation in vivo, indicating that cosQ, per se, is not a packaging stop signal. A model is presented in which the role of cosQ is to depolarize the asymmetric arrangement of terminase protomers in the translocation complex so that protomers are configured to match the 2-fold rotational symmetry of cosN.

Mutations affecting the high affinity ATPase center of gpA, the large subunit of bacteriophage lambda terminase, inactivate the endonuclease activity of terminase.

Phage lambda terminase carries out the cos cleavage reaction that generates mature chromosomes from immature concatemeric DNA. The ATP-stimulated endonuclease activity of terminase is located in gpA, the large terminase subunit. There is a high affinity ATPase center in gpA, and a match to the conserved P-loop of known ATPases is found starting near residue 490. Changing the conserved P-loop lysine at residue 497 of gpA affects the high affinity ATPase activity of terminase. In the present work, mutations causing the gpA changes K497A and K497D were found to be lethal, and phages carrying these mutations were defective in cos cleavage, in vivo. Purified K497A and K497D enzymes cleaved cos in vitro at rates reduced from the wild-type rate by factors of 1000 and 2000, respectively. The strong defects in cos cleavage are sufficient to explain the lethality of the K497A and K497D defects. In in vitro packaging studies using mature (cleaved) phage DNA, the K497A enzyme was indistinguishable from the wild-type enzyme, and the K497D enzyme showed a mild packaging defect under limiting terminase conditions. In a purified DNA packaging system, the wild-type and K497D enzymes showed similar packaging activities that were stimulated to half-maximal levels at about 3 microM ATP, indicating that the K497D change does not affect DNA translocation. In sum, the work indicates that the high affinity ATPase center of gpA is involved in stimulation of the endonuclease activity of terminase.

Function of IHF in lambda DNA packaging. I. Identification of the strong binding site for integration host factor and the locus for intrinsic bending in cosB.

Integration host factor (IHF) plays an accessory role in lambda DNA packaging. IHF affects the interaction of the lambda DNA packaging protein, terminase, with cos, the site on lambda DNA at which terminase binds and introduces staggered nicks to generate cohesive ends of mature lambda chromosomes. cos includes cosB, the terminase binding site and cosN, the adjacent nicking site. cosB includes multiple binding sites for gpNu1, the small subunit of terminase, and an IHF binding site, I1. I1 contains two overlapping sequences, called I1A and I1B, that closely match the consensus sequence for IHF binding sites. The I1A sequence was determined to be the site of IHF binding by hydroxyl radical footprinting experiments. Comparison of the pattern of IHF-induced enhancements and diminishments at I1 with published patterns for IHF binding sites at the lambda attachment site identifies I1A as the IHF binding site at I1. The conclusion that I1A is the IHF binding site was confirmed by studies with DNA mutant in I1A. The I1A- mutation, consisting of three adjacent base-pair changes in I1A, abolished IHF binding. In contrast to the I1A- mutation, a mutation in I1B, also consisting of three adjacent base-pair changes, caused a reduction in the affinity of IHF for I1A, and caused a reduction in the magnitude of the net intrinsic bending of cos lambda.

The role of cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda, in the nicking reaction.

cosB is the binding site for terminase, the DNA packaging enzyme of ai-12581mbda, and cosN is the adjacent site at which terminase gm-07228es staggered nicks to generate mature lambda DNA molecules. There are three binding sites (R3, R2 and R1) within cosB for gpNu1, the small subunit of terminase. A particular transition mutation of R1, known to weaken binding of gpNu1 to R1, has been introduced into the other R sites, and in the present work the effects of R site mutations on nicking of cosN have been examined. Nicking experiments performed in the presence of ATP suggest that the most profound cosB mutation tested (the R3-R2-R1- mutation) would, at most, reduce cos nicking to congruent to 30% of the level observed for the wild-type substrate. In the presence of ATP, the R3-R2-R1- mutation had no significant effect on terminase nicking of the 1 strand and reduced r-strand nicking to 35% of the wild-type level. The other cosB mutations had no effect on the nicking of either DNA strand when nucleotide was added, but in the absence of ATP, most of the cos mutations resulted in some form of cosN nicking defect; the nicking defects, however, are milder than the in vivo packaging defects that result from the mutations. Quantitatively, only the effect of the R3-R2-R1- mutation on in vitro cosN nicking is reflective of the growth defect exhibited by a R3-R2-R1- phage but the nicking defect is only observed when ATP is omitted from the reaction. The proposal that the cosB mutations primarily affect DNA packaging rather than cosN nicking is discussed. All of the cosB mutations affect r-strand nicking to a greater extent than 1-strand nicking, implying that the interaction of terminase with the left half of cosN occurs via the direct recognition of cosNL by terminase. The level of DNA substrate required for half-maximal cos nicking is approximately equivalent for reactions performed in the presence or absence of ATP, indicating that ATP does not increase the affinity of terminase for cosB. ATP does accelerate the rate of cos nicking, suggesting that the role of ATP in promoting nicking of the cosB- DNAs is primarily to increase the rate of conversion of a cosN-terminase complex into product. A possible fourth R site, R4, is located on the other side of cosN from cosB.(ABSTRACT TRUNCATED AT 400 WORDS)

Mutational analysis of the prohead binding domain of the large subunit of terminase, the bacteriophage lambda DNA packaging enzyme.

Terminase, the DNA packaging enzyme of bacteriophage lambda, is made up of two subunits, gpNul and gpA, the products of the Nu1 and A genes. The activities of terminase include DNA binding, cos cleavage and prohead binding. Specificity domains within the structure of terminase have previously been defined by genetic studies of lambda-21 hybrids. The prohead binding domain of terminase is localized to the last 32 amino acid residues of gpA. Mutations in the prohead binding domain of gpA were constructed by introducing the corresponding amino acids from gp2, the gpA analog of bacteriophage 21. The last five residues of gpA can be replaced with little effect on the burst size of lambda. A phage with a replacement of the last six residues of gpA with the corresponding residues of gp2 was unable to form plaques, indicating that the sixth-to-last residues of gpA is crucial for prohead binding. Site-specific mutagenesis of the sixth-to-last position of gpA indicated that the sixth-to-last residue of gpA must be hydrophobic, of the seven amino acids tested, only isoleucine and valine can substitute for leucine at this position. Although the last five residues of gp2 were functional when they replaced the last five residues of gpA, two results indicated that the last five residues of gpA functioned better than the corresponding residues of gp2. First, the presence of a valine residue at the sixth-to-last position of gpA allowed plaque formation, whereas replacement of the last six residues of gpA with those of gp2, which substitutes a valine residue at the sixth-to-last position, was lethal. The second set of results indicating that the last five residues of gpA function better than the gp2 residues were obtained by study of revertants of lethal substitution mutations. In constructing the replacement mutations, a short linker was inserted into the C terminus of the A gene; this insertion created a short duplication of the end of the A gene, so that the normal C-terminal codons were located downstream of the stop codon of the A gene in the substitution mutants. Revertants of the lethal substitution mutations were obtained in which a mutation in the stop codon resulted in addition of the last five residues of gpA to the end of the substitution terminase.(ABSTRACT TRUNCATED AT 400 WORDS)

Specific interaction of terminase, the DNA packaging enzyme of bacteriophage lambda, with the portal protein of the prohead.

Terminase, the bacteriophage lambda DNA packaging protein, is a heteromultimer of two subunits, gpNu1 and gpA, the products of genes Nu1 and A, resp. Phage 21 is a lambdoid phage that produces a terminase similar to that of lambda terminase, the subunits of 21 terminase, gp1 and gp2, have the same domain structures of their lambda analog, gpNu1 and gpA, respectively. The lambda and 21 terminases have different DNA binding and prohead binding specificities. When the C-terminal 32 amino residues of gpA replace the C-terminal 32 residues of gp2, the resulting chimeric terminase specifically uses lambda proheads, indicating that the C-terminal 32 residues of gpA are a specificity domain for prohead binding. A second chimeric terminase, in which the C-terminal six residues of gpA are replaced by the C-terminal six residues of gp2, is unable to utilize lambda proheads, and a lambda phage producing this terminase, lambda Are636, is unable to form plaques. In the present work, a pseudorevertant of lambda Are636 was isolated that contained a mutation Bms8, affecting the prohead. The B gene encodes the portal protein of lambda proheads, which forms the special vertex that is thought to serve as (1) the site of DNA entry into the prohead during packaging, (2) the site for DNA exit during DNA injection, and (3) the site of tail attachment during virion assembly. Bms8 is predicted to change residue 331 of gpB from proline to serine. Burst size measurements and in vitro DNA packaging experiments demonstrated allele-specific interactions between the Are636 terminase and Bms8 proheads. That is, wild-type terminase interacted more efficiently with wild-type proheads than with Bms8 proheads, and Are636 terminase interacted with Bms8 proheads more efficiently than with wild-type proheads. Prohead binding by lambda terminase is stimulated by an assembly catalyst, gpFI. In vitro packaging extracts lacking gpFI were used under conditions in which packaging was gpFI-independent. In the absence of gpFI, Are636 terminase interacted most efficiently with Bms8 proheads, and wild-type terminase interacted most efficiently with wild-type proheads. The allele-specific interactions in the absence of gpFI indicate that the Are636 and Bms8 mutations affect direct interactions between terminase and the portal protein, rather than acting indirectly by altering the interactions of terminase and gpB and gpFI.

Bacteriophage lambda DNA packaging: DNA site requirements for termination and processivity.

Bacteriophage lambda chromosomes are processively packaged into preformed shells, using end-to-end multimers of intracellular viral DNA as the packaging substate. A 200 bp long DNA segment, cos, contains all the sequences needed for DNA packaging. The work reported here shows that efficient DNA packaging termination requires cos's I2 segment, in addition to the required termination subsite, cosQ, and the nicking site, cosN. Efficient processivity requires cosB, in addition to cosQ and cosN. An initiation-defective mutant form of cosB sponsored efficient processivity, indicating that the terminase-cosB interactions required for termination are less stringent than those required at initiation. The finding that an initiation-defective form of cosB is functional for processivity allows a re-interpretation of a similar finding, obtained previously, that the initiation-defective cosB of phage 21 is functional for processivity by the lambda packaging machinery. The cosBphi21 result can now be interpreted as indicating that interactions between cosBphi21 and lambda terminase, while insufficient for initiation, function for processivity.

Structure of the bacteriophage lambda cohesive end site. Genetic analysis of the site (cosN) at which nicks are introduced by terminase.

A collection of mutations affecting the site (cosN) at which the bacteriophage lambda DNA packaging enzyme, terminase, introduces nicks to generate mature lambda chromosomes has been studied. A good correlation was found for mutational effects on burst size, accumulation of unused proheads, packaging of DNA into heads and cos cutting by terminase in vitro, indicating that defective cosN cleavage by terminase is the molecular explanation for the phenotypic effects of the mutations. Although the base-pairs of cosN display partial twofold rotational symmetry, cosN was found to be asymmetric functionally. Certain mutations to the left side of the center of rotational symmetry have more pronounced phenotypic effects than rotationally symmetric mutations to the right. The cosN11G mutation has no phenotypic effects when present as a single mutation, but does affect DNA packaging and cosN cutting in the presence of the symmetrically disposed cosN2C mutation. Mutations that decrease cosN cleavage result in the accumulation of unexpanded proheads, indicating that prohead expansion depends on cosN cutting.

The last duplex base-pair of the phage lambda chromosome. Involvement in packaging, ejection and routing of lambda DNA.

cosN is the site at which the bacteriophage lambda DNA packaging enzyme, terminase, introduces staggered nicks to generate the cohesive ends of mature lambda chromosomes. Genetic and molecular studies show that cosN is recognized specifically by terminase and that effects of cosN mutations on lambda DNA packaging and cosN cleavage are well correlated. Mutations affecting a particular base-pair of cosN are unusual in being lethal in spite of causing only a moderate defect in cosN cleavage and DNA packaging. The particular base-pair is the rightmost duplex base-pair in mature chromosomes, at position 48,502 in the numbering system of Daniels et al; herein called position - 1. A G.C to T.A transversion mutation at position - 1, called cosN - 1T, reduces the particle yield of lambda fivefold, and the particles formed are not infectious. lambda cosN - 1T particles have wild-type morphology, and contain chromosomes that have normal cohesive ends. The chromosomes of lambda cosN - 1T particles, like the chromosomes of lambda + particles, are associated with the tail. lambda cosN - 1T particles, in spite of being normal structurally, are defective in injection of DNA into a host cell. Only approximately 25% of lambda cosN - 1T particles are able to eject DNA from the capsid in contrast to 100% for lambda +. Furthermore, for the 25% that do eject, there is a further injection defect because the ejected lambda cosN - 1T chromosomes fail to cyclize, in contrast to the efficient cyclization found for wild-type chromosomes following injection. The cosN - 1T mutation has no effect on Ca2+ mediated transformation by lambda DNA, indicating that the effect of the mutation on DNA fate is specific to the process of DNA injection. Models in which specific DNA : protein interactions necessary for DNA injection, and involving the rightmost base-pair of the lambda chromosome, are considered.

Essential interaction between lambdoid phage 21 terminase and the Escherichia coli integrative host factor.

Lambdoid phage 21 requires the Escherichia coli integrative host factor (IHF) for growth. lambda-21 hybrids that have 21 DNA packaging specificity also require IHF. IHF-independent (her) mutants have been isolated. her mutations map in the amino-terminal half of the 21 1 gene. The 1 gene encodes the small subunit of the 21 terminase, and the amino-terminal half of the 1 polypeptide is a functional domain for specifically binding 21 DNA. Hence changes in the DNA-binding domain of terminase, her mutations, render 21 terminase able to function in the absence of IHF. Three of four her mutations studied are trans-dominant. An in vitro system was used to show that packaging of 21 DNA is IHF-dependent. IHF is directly required during the early, terminase-dependent steps of assembly. It is concluded that IHF is a host factor required for function of the 21 terminase. It is proposed, in analogy to the role of IHF in lambda integration, that IHF facilitates proper binding of 21 terminase to phage DNA. Consistent with this proposal, possible IHF-binding sites are present in the 21 cohesive end site.

Processive action of terminase during sequential packaging of bacteriophage lambda chromosomes.

Bacteriophage lambda chromosomes are packaged in a polarized, sequential fashion from a multimeric DNA substrate. Mature chromosomes are generated when terminase introduces staggered nicks in the cohesive end sites (cos sites) bounding a chromosome. Packaging is polarized, to the initial and terminal cos sites for packaging a chromosome can be defined. To initiate packaging, terminase binds to cos at cosB, and subsequently cuts at cosN. To terminate packaging of a chromosome, a functional cosB is not required at the terminal cos. To explain this finding, it was proposed earlier that terminase scans for the terminal cosN, rather than any subsequent cosB, during packaging. In the work described here we performed helper packaging experiments to see whether processive action of terminase occurs during sequential packaging of lambda chromosomes. The helper packaging experiments involve trilysogens; strains carrying three prophages in tandem. Infection by a hetero-immune helper phage results in packaging of the repressed prophage chromosomes, since the prophage structure is analogous to the normal DNA substrate. Two chromosomes can be packaged from between the three cos sites of the prophages of a trilysogen. Both chromosomes are packaged even when the central cos is cosB-. Our interpretation of these data is that terminase is brought to the central cos by packaging; following cleavage of the central cos, the terminase remains bound to the distal chromosome; and terminase acts to begin packaging of the distal chromosome. The frequency at which terminase reads across the central cos to initiate packaging of the distal chromosome is in the range from 0.3 to 0.5 in our experiments. Reading across cos was found not to be greatly dependent on the state of cosB, indicating that cosB binding is only needed for packaging the first chromosome in a packaging series. A multilysogen was constructed in which the initial cos was cos+ and the distal cos sites were all cosB-. The initial and downstream chromosomes were found to be packaged. This result indicates that terminase that is brought to the central cos by packaging is not only able to initiate packaging of a downstream chromosome, but can also scan and terminate packaging of the downstream chromosome. A model is presented in which processive action of terminase is the basis for sequential packaging of lambda chromosomes.

The terminase of bacteriophage lambda. Functional domains for cosB binding and multimer assembly.

Terminase is a protein complex involved in lambda DNA packaging. The subunits of terminase, gpNul and gpA, are the products of genes Nul and A. The actions of terminase include DNA binding, prohead binding and DNA nicking. Phage 21 is a lambdoid phage that also makes a terminase, encoded by genes 1 and 2. The terminases of 21 and lambda are not interchangeable. This specificity involves two actions of terminase; DNA binding and prohead binding. In addition, the subunits of lambda terminase will not form functional multimers with the subunits of 21 terminase. lambda-21 hybrid phages can be produced as a result of recombination. We describe here lambda-21 hybrid phages that have hybrid terminase genes. The packaging specificities of the hybrids and the structure of their genes were compared in order to identify functional domains of terminase. The packaging specificities were determined in vivo by complementation tests and helper packaging experiments. Restriction enzyme site mapping and sequencing located the sites at which recombination occurred to produce the hybrid phages. lambda-21 hybrid 51 carries the lambda A gene, and a hybrid 1/Nul gene. The crossover that produced this phage occurred near the middle of the 1 and Nul genes. The amino-terminal portion of the hybrid protein is homologous to gp1 and the carboxy-terminal portion is homologous to gpNul. It binds to 21 DNA and forms functional multimers with gpA, providing evidence that the amino-terminal portion of gpNul is involved in DNA binding and the carboxy-terminal portion of gpNul is involved in the interaction with gpA. lambda-21 hybrid 54 has a hybrid 2/A gene. The amino terminus of the hybrid protein of lambda-21 hybrid 54 is homologous with gp2. This protein forms functional multimers only with gp1, providing evidence that the amino terminus of gpA is involved in the interaction with gpNul. These studies identify three functional domains of terminase.

A functional domain of bacteriophage lambda terminase for prohead binding.

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.

ATPase center of bacteriophage lambda terminase involved in post-cleavage stages of DNA packaging: identification of ATP-interactive amino acids.

Terminase is the enzyme that mediates lambda DNA packaging into the viral prohead. The large subunit of terminase, gpA (641 amino acid residues), has a high-affinity ATPase activity (K(m)=5 microM). To directly identify gpA's ATP-interacting amino acids, holoterminase bearing a His(6)-tag at the C terminus of gpA was UV-crosslinked with 8-N(3)-[alpha-(32)P]ATP. Tryptic peptides from the photolabeled terminase were purified by affinity chromatography and reverse-phase HPLC. Two labeled peptides of gpA were identified. Amino acid sequencing failed to show the tyrosine residue of the first peptide, E(43)SAY(46)QEGR(50), or the lysine of the second peptide, V(80)GYSK(84)MLL(87), indicating that Y(46) and K(84) were the 8-N(3)-ATP-modified amino acids. To investigate their roles in lambda DNA packaging, Y(46) was changed to E, A, and F, and K(84) was changed to E and A. Purified His(6)-tagged terminases with changes at residues 46 and 84 lacked the gpA high-affinity ATPase activity, though the cos cleavage and cohesive end separation activities were near to those of the wild-type enzyme. In virion assembly reactions using virion DNA as a packaging substrate, the mutant terminases showed severe defects. In summary, the results indicate that Y(46) and K(84) are part of the high-affinity ATPase center of gpA, and show that this ATPase activity is involved in the post-cos cleavage stages of lambda DNA packaging.

Function of IHF in lambda DNA packaging. II. Effects of mutations altering the IHF binding site and the intrinsic bend in cosB on lambda development.

cosB is the binding site on lambda DNA for terminase, the phage DNA packaging protein. cosB contains three binding sites for gpNu1, the small subunit of terminase, and a site for integration host factor (IHF). IHF plays an accessory role in lambda DNA packaging, and IHF stimulates the burst size of lambda several-fold, presumably by assisting the interaction of terminase with cosB. The present work includes a study of the effect on lambda development of a mutation, called I1A-, which consists of three adjacent base-pair changes in the IHF binding site. The I1A- mutation was found to abolish IHF stimulation of the lambda burst size, indicating that IHF is unable to bind to the mutant I1A site. A second mutation, called I1B- and also consisting of three adjacent base-pair changes, is a mutation that reduces an intrinsic bend found in cosB. lambda I1B- was more dependent on IHF than lambda+, raising the possibility that the intrinsic bend in cosB plays a role in cos function for lambda+ under the IHF- conditions. In vitro DNA packaging experiments established that the I1 mutations affect DNA packaging per se. A series of Nu1 mutations that create terminases able to suppress a variety of cosB defects were found to suppress the defects of the I1A- and I1B- mutations under IHF- conditions.

Genetic evidence that recognition of cosQ, the signal for termination of phage lambda DNA packaging, depends on the extent of head filling.

Packaging a phage lambda chromosome involves cutting the chromosome from a concatemer and translocating the DNA into a prohead. The cutting site, cos, consists of three subsites: cosN, the nicking site; cosB, a site required for packaging initiation; and cosQ a site required for termination of packaging. cosB contains three binding sites (R sequences) for gpNu1, the small subunit of terminase. Because cosQ has sequence identity to the R sequences, it has been proposed that cosQ is also recognized by gpNu1. Suppressors of cosB mutations were unable to suppress a cosQ point mutation. Suppressors of a cosQ mutation (cosQ1) were isolated and found to be of three sorts, the first affecting a base pair in cosQ. The second type of cosQ suppression involved increasing the length of the phage chromosome to a length near to the maximum capacity of the head shell. A third class of suppressors were missense mutations in gene B, which encodes the portal protein of the virion. It is speculated that increasing DNA length and altering the portal protein may reduce the rate of translocation, thereby increasing the efficiency of recognition of the mutant cosQ. None of the cosQ suppressors was able to suppress cosB mutations. Because cosQ and cosB mutations are suppressed by very different types of suppressors, it is concluded that cosQ and the R sequences of cosB are recognized by different DNA-binding determinants.

Defining cosQ, the site required for termination of bacteriophage lambda DNA packaging.

Bacteriophage lambda is a double-stranded DNA virus that processes concatemeric DNA into virion chromosomes by cutting at specific recognition sites termed cos. A cos is composed of three subsites: cosN, the nicking site; cosB, required for packaging initiation; and cosQ, required for termination of chromosome packaging. During packaging termination, nicking of the bottom strand of cosN depends on cosQ, suggesting that cosQ is needed to deliver terminase to the bottom strand of cosN to carry out nicking. In the present work, saturation mutagenesis showed that a 7-bp segment comprises cosQ. A proposal that cosQ function requires an optimal sequence match between cosQ and cosNR, the right cosN half-site, was tested by constructing double cosQ mutants; the behavior of the double mutants was inconsistent with the proposal. Substitutions in the 17-bp region between cosQ and cosN resulted in no major defects in chromosome packaging. Insertional mutagenesis indicated that proper spacing between cosQ and cosN is required. The lethality of integral helical insertions eliminated a model in which DNA looping enables cosQ to deliver a gpA protomer for nicking at cosN. The 7 bp of cosQ coincide exactly with the recognition sequence for the Escherichia coli restriction endonuclease, EcoO109I.

Domains for protein-protein interactions at the N and C termini of the large subunit of bacteriophage lambda terminase.

The large subunit of phage lambda terminase, gpA, the gene product of the phage A gene, interacts with the small subunit, gpNul, to form functional terminase. Terminase binds to lambda DNA at cosB to form a binary complex. The terminase:DNA complex binds a prohead to form a ternary complex. Ternary complex formation involves an interaction of the prohead with gpA. The amino terminus of gpA contains a functional domain for interaction with gpNul, and the carboxy-terminal 38 amino acids of gpA contain a functional domain for prohead binding. This information about the structure of gpA was obtained through the use of hybrid phages resulting from recombination between lambda and the related phage 21. lambda and 21 encode terminases that are analogous in structural organization and have ca. 60% sequence identity. In spite of these similarities, lambda and 21 terminases differ in specificity for DNA binding, subunit assembly, and prohead binding. A lambda-21 hybrid phage produces a terminase in which one of the subunits is chimeric and had recombinant specificities. In the work reported here; a new hybrid, lambda-21 hybrid 67, is characterized. lambda-21 hybrid 67 is the result of a crossover between lambda and 21 in the large subunit genes, such that the DNA from the left chromosome end is from 21, including cosB phi 21, the 1 gene, and the first 48 codons for the 2 gene. The rest of the hybrid 67 chromosome is lambda DNA, including 593 codons of the A gene. The chimeric gp2/A of hybrid 67 binds gp1 to form functional terminase.(ABSTRACT TRUNCATED AT 250 WORDS)