RESUMEN
Ceratocystis fimbriata is a destructive fungal pathogen of sweetpotato (Ipomoea batatas) that leads to losses at all stages of sweetpotato production. Accurate detection of C. fimbriata would allow for more efficient deployment of management tactics in sweetpotato production. To develop a diagnostic assay, a hybrid genome assembly of C. fimbriata isolate AS236 was generated. The resulting 31.7-MB assembly was near-chromosome level, with 18 contigs, 6,481 predicted genes, and a BUSCO completion score of 98.4% when compared with the fungus-specific lineage database. Additional Illumina DNA reads from C. manginecans, C. platani, and a second C. fimbriata isolate (C1421) were then mapped to the assembled genome using BOWTIE2 and counted using HTSeq, which identified 148 genes present only within C. fimbriata as molecular diagnostic candidates; 6 single-copy and 35 highly multi-copy (>40 BLAST hits), as determined through a self-BLAST-P alignment. Primers for PCR were designed in the 200-bp flanking region of the first exon for each candidate, and the candidates were validated against a diverse DNA panel containing Ceratocystis species, sweetpotato pathogens, and plants. After validation, two diagnostic candidates amplified only C. fimbriata DNA and were considered to be highly specific to the species. These genetic markers will serve as valuable diagnostic tools with multiple applications including the detection of C. fimbriata in seed, soil, and wash water in sweetpotato production.
Asunto(s)
Ascomicetos , Genoma Fúngico , Ipomoea batatas , Enfermedades de las Plantas , Ipomoea batatas/microbiología , Enfermedades de las Plantas/microbiología , Ascomicetos/genética , Ascomicetos/aislamiento & purificación , Genoma Fúngico/genética , Análisis de Secuencia de ADN , ADN de Hongos/genéticaRESUMEN
AIM: To compare six reciprocating instruments regarding their geometric design, metallurgical characteristics, mechanical behaviour and ability to prepare root canals. METHODOLOGY: A total of 246 new 25-mm NiTi instruments (41 per group) from six reciprocating systems (Reciproc, Reciproc Blue, One Files, One Files Blue, Reverso Silver, and WaveOne Gold) were evaluated throughout a multimethod approach regarding their design using stereomicroscopy (number of blades and helix angle) and scanning electron microscopy (blades symmetry, cross section and surface finishing), nickel-titanium composition, phase transformation temperatures, mechanical performance (cyclic fatigue, torsional and bending resistance) and unprepared canal surface area on anatomically matched mandibular molars assessed by micro-CT. One-way ANOVA and post hoc Tukey's or Mood's median tests were selected depending on sample distribution with significance level set at 5%. RESULTS: The instruments had similarities regarding their metal composition and unprepared canal area, whilst differences in phase transformation temperatures and geometric design (number of blades, surface finishing and tip geometry) were observed. Overall, no difference was observed regarding the maximum torque values (P > 0.05), whilst One Files (72 s) and One Files Blue (414 s) had the shortest and longest times to fracture, respectively (P < 0.05). Similar angles of rotation were observed in Reciproc (310°), One Files (285°) and Reverso Silver (318°) instruments (P > 0.05), which were significantly lower than Reciproc Blue (492°), One Files Blue (456°) and WaveOne Gold (492°; P < 0.05). Maximum bending load demonstrated that Reciproc Blue (201.3 gf) was significantly more flexible that the other instruments (P < 0.05). CONCLUSION: Although there were similarities in metal composition and percentage of unprepared canal surface, the instruments had differences in the overall geometric design, phase transformation temperatures and in the four mechanical resistance parameters (time to fracture, maximum torque, angle of rotation and maximum bending load).
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular , Diseño de Equipo , Ensayo de Materiales , Estrés MecánicoRESUMEN
AIM: To compare the ProTaper Next (PTN) system with a replica-like and a counterfeit system regarding design, metallurgy, mechanical performance and shaping ability. METHODOLOGY: Replica-like (X-File) and counterfeit (PTN-CF) instruments were compared to the PTN system regarding design (microscopy), phase transformation temperatures (differential scanning calorimetry), nickel-titanium ratio (energy-dispersive X-ray spectroscopy), cyclic fatigue, torsional resistance, bending strength, and untouched canal areas in extracted mandibular molars (micro-CT). anova, post hoc Tukey's and Kruskal-Wallis tests were used according to normality assessment (Shapiro-Wilk test) with the significance level set at 5%. RESULTS: Overall similarities in design and nickel-titanium (Ni/Ti) ratio were observed amongst instruments with the X-File having a smoother surface finish. PTN and PTN-CF had mixed austenite plus R-phase (R-phase start approximately at 45 ºC and near 30 ºC, respectively), whilst X-File instruments were austenitic (R-phase started at approximately at 17 ºC) at room temperature (20 ºC). PTN-CF had the greatest inconsistency in the phase transformation temperatures. Time to fracture of PTN-CF X2 and X3 was significantly shorter than PTN and X-File instruments (P < 0.05), whilst no difference was noted in maximum torque to fracture amongst the tested systems (P > 0.05). X-Files and PTN-CF had a stress-induced phase change during bending load. Mean unprepared surface areas of root canals were 25.8% (PTN), 31.1% (X-File) and 32.5% (PTN-CF) with no significant difference amongst groups (P > 0.05). CONCLUSION: Similarities amongst the systems were noted in the Ni/Ti ratio and maximum torque to fracture, whilst differences were observed in the design, phase transformation temperatures and mechanical behaviour. The ProTaper Next counterfeit instruments could be considered as the less secure system considering its low-cyclic fatigue resistance. Apart from these differences, the unprepared canal surface areas, obtained with the tested systems, were similar.
Asunto(s)
Aleaciones Dentales , Preparación del Conducto Radicular , Diseño de Equipo , Ensayo de Materiales , Metalurgia , Estrés Mecánico , Titanio , Microtomografía por Rayos XRESUMEN
Sheep production systems in Brazilian caatinga rangelands require supplementation adapted to changes in floristic and chemical composition as dry seasons progress. Meeting sheep nutritional needs in extensive semiarid systems is challenging because of sheep dietary preferences and habits. The objective of this trial was to evaluate the substitutive effect of concentrate supplementation on grazing sheep in the Brazilian caatinga rangeland and its consequences on performance in different seasons. The trial was conducted from March to August 2013 at Embrapa Goat and Sheep in Sobral, Ceará State, Brazil. Thirty-two Brazilian Somali multiparous ewes were submitted to estrus synchronization and controlled breeding. At the start of the trial, ewes averaged 30.45 + 2.60 kg body weight (BW). Ewes were divided into four groups and individually offered 0, 200, 350, or 500 g supplement head-1 day-1. Intake prediction and digestibility trials were evaluated at three periods: rainy season (April), transition rainy-dry (June), and dry season (August). Sheep weights were taken every 14 days to measure their performance from late gestation until weaning. Ewe BW and body condition score changes were determined too. Lamb BW changes were also measured every 14 days from birth through weaning. A completely randomized design with split plot arrangement using eight replications was used for intake and digestibility measurements. The differences between supplement offered (0, 200, 350, and 500 g sheep-1) and season (rainy, transition rainy-dry, and dry) were submitted to analyses of variance and multiple means were separated, where differences were detected, using the Tukey's test. During lactation up through weaning, ewes supplemented at 500 g day-1 had greater BW than ewes without supplement. Ewes supplemented with 200 g concentrate head-1 day-1 had 9.1% greater (P ≤ 0.05) BW at weaning and their lambs had 19.7% greater birth and 16.6% heavier wean BW despite lower dry matter intake compared to unsupplemented animals. Supplementation with 200 g concentrate increased carrying capacity by 28.8% during the dry season and by 20.5% during the rainy season. This study confirmed that in the dry season, when quality of rangeland forages decreases, supplementation contributes to greater DMI, improves postpartum and lactation BW recovery of ewes, and contributes to greater lamb birth and wean weights. Moreover, supplementation leads to feed substitution effects that may increase rangeland resilience by mitigating overgrazing. Supplementation with 200 g concentrate can also prevent negative energy balance for grazing animals, improving longer postnatal recovery, longer intervals between parturitions, fewer double and is necessary to ensure a better BW at birth to lambs.
Asunto(s)
Digestión , Ingestión de Alimentos , Preñez , Oveja Doméstica/fisiología , Alimentación Animal/análisis , Crianza de Animales Domésticos , Fenómenos Fisiológicos Nutricionales de los Animales/efectos de los fármacos , Animales , Brasil , Dieta/veterinaria , Suplementos Dietéticos/análisis , Digestión/efectos de los fármacos , Relación Dosis-Respuesta a Droga , Ingestión de Alimentos/efectos de los fármacos , Ecosistema , Femenino , Embarazo , Preñez/efectos de los fármacos , Distribución Aleatoria , Estaciones del Año , DesteteRESUMEN
In this work, the elasticity under stretching as well as the fluidity of Giant Hybrid Unilamellar Vesicles (GHUV) has been studied. The membrane structuration of these GHUVs has already been studied at the micro and nanoscale in a previous study of the team. These GHUVs were obtained by the association of a fluid phospholipid (POPC) and a triblock copolymer, poly(ethyleneoxide)-b-poly(dimethylsiloxane)-b-poly(ethyleneoxide). Although the architecture of triblock copolymers can facilitate vesicle formation, they have been scarcely used to generate GHUVs. We show, through micropipette aspiration and FRAP experiments, that the incorporation of a low amount of lipids in the polymer membrane leads to a significant loss of the toughness of the vesicle and subtle modification of the lateral diffusion of polymer chains. We discuss the results within the framework of the conformation of the triblock copolymer chain in the membrane and in the presence of lipid nanodomains.
Asunto(s)
Fosfolípidos/química , Polímeros/química , Liposomas Unilamelares/química , Recuperación de Fluorescencia tras Fotoblanqueo , Membrana Dobles de Lípidos/químicaRESUMEN
The study identified insecticidal effects from the cinnamon and clove essential oils in Tenebrio molitor L. (Coleoptera: Tenebrionidae). The lethal concentrations (LC50 and LC90), lethal time, and repellent effect on larvae, pupae, and adults of T. molitor after exposure to six concentrations of each essential oil and toxic compounds were evaluated. The chemical composition of the cinnamon oil was also determined and primary compounds were eugenol (10.19%), trans-3-caren-2-ol (9.92%), benzyl benzoate (9.68%), caryophyllene (9.05%), eugenyl acetate (7.47%), α-phellandrene (7.18%), and α-pinene (6.92%). In clove essential oil, the primary compounds were eugenol (26.64%), caryophyllene (23.73%), caryophyllene oxide (17.74%), 2-propenoic acid (11.84%), α-humulene (10.48%), γ-cadinene (4.85%), and humulene oxide (4.69%). Cinnamon and clove essential oils were toxic to T. molitor. In toxic chemical compounds, eugenol have stronger contact toxicity in larvae, pupae, and adult than caryophyllene oxide, followed by α-pinene, α-phellandrene, and α-humulene. In general, the two essential oils were toxic and repellent to adult T. molitor. Cinnamon and clove essential oils and their compounds caused higher mortality and repellency on T. molitor and, therefore, have the potential for integrated management programs of this insect.
Asunto(s)
Aceite de Clavo , Control de Insectos , Repelentes de Insectos , Insecticidas , Aceites Volátiles , Tenebrio , Animales , Relación Dosis-Respuesta a Droga , Larva/crecimiento & desarrollo , Dosificación Letal Mediana , Pupa/crecimiento & desarrollo , Tenebrio/crecimiento & desarrolloRESUMEN
AIM: To evaluate the intratubular antimicrobial activity of several oxidant and chelating agents associated with or without surfactants in experimentally infected root canals, using confocal laser scanning microscopy. METHODOLOGY: Twenty-four dentine blocks from bovine incisors were contaminated for 5 days with Enterococcus faecalis (ATCC- 29212). Ten contaminated dentine specimens were irrigated for 5 min with 5.25% NaOCl followed by 17% EDTA for 2 min, and the other 10 with Hypoclean for 5 min followed by Tetraclean NA for 2 min. The remaining four specimens were used as positive and negative controls (two samples each). Then, dentine blocks were stained with Live/Dead BacLight for analysis of the remaining live or dead bacteria using confocal laser scanning microscopy. Comparison between and within groups was performed using the Mann-Whitney test for independent samples and the Wilcoxon signed-rank test, respectively. RESULTS: After exposure to irrigants, the positive control group had a median of 67.41% of viable bacteria (95% CI: 48.15, 78.9), whilst the NaOCl+EDTA group and Hypoclean+Tetraclean NA group had 3.77% (1.28, 15.92) and 0.87% (-0.42, 4.30) of viable bacteria, respectively. These results were significantly different from each other, both overall and distinct by region (cervical and medium third), or depth (superficial and deep layer) (P < 0.01 in all cases). CONCLUSIONS: The use of adjunctive agents reducing the surface tension associated with oxidant and chelating agents improved the antimicrobial activity of irrigating solutions and intratubular decontamination against Enterococcus faecalis, possibly due to better removal of the smear layer and deeper penetration into dentinal tubules.
Asunto(s)
Antiinfecciosos/farmacología , Quelantes/farmacología , Dentina/microbiología , Enterococcus faecalis/efectos de los fármacos , Microscopía Confocal/métodos , Oxidantes/farmacología , Irrigantes del Conducto Radicular/farmacología , Animales , Bovinos , Compuestos de Cetrimonio/farmacología , Ácido Cítrico/farmacología , Cavidad Pulpar/microbiología , Cavidad Pulpar/patología , Dentina/patología , Doxiciclina/farmacología , Combinación de Medicamentos , Ácido Edético/farmacología , Incisivo , Viabilidad Microbiana/efectos de los fármacos , Polipropilenos/farmacología , Capa de Barro Dentinario , Hipoclorito de Sodio/farmacología , Tensión Superficial/efectos de los fármacosRESUMEN
Hybrids, i.e., intimately mixed polymer/phospholipid vesicles, can potentially marry in a single membrane the best characteristics of the two separate components. The ability of amphiphilic copolymers and phospholipids to self-assemble into hybrid membranes has been studied until now on the submicrometer scale using optical microscopy on giant hybrid unilamellar vesicles (GHUVs), but limited information is available on large hybrid unilamellar vesicles (LHUVs). In this work, copolymers based on poly(dimethylsiloxane) and poly(ethylene oxide) with different molar masses and architectures (graft, triblock) were associated with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). Classical protocols of LUV formation were used to obtain nanosized self-assembled structures. Using small-angle neutron scattering (SANS), time-resolved Förster resonance energy transfer (TR-FRET), and cryo-transmission electron microscopy (cryo-TEM), we show that copolymer architecture and molar mass have direct influences on the formation of hybrid nanostructures that can range from wormlike hybrid micelles to hybrid vesicles presenting small lipid nanodomains.
Asunto(s)
1,2-Dipalmitoilfosfatidilcolina/química , Dimetilpolisiloxanos/química , Micelas , Nanoestructuras/química , Polietilenglicoles/química , Liposomas Unilamelares/química , Modelos Moleculares , Conformación MolecularRESUMEN
BACKGROUND: Platelet transfusion therapy poses many challenges in veterinary clinical practice. Lack of readily available blood donors, short shelf-life, and inability to administer a sufficient number of platelets to meet a dog's transfusion need are the major difficulties encountered. Platelet additive solutions are already in use at American and European human blood banks, showing to be a realistic alternative. This study compares the in vitro platelet function in plasma, Composol, or SSP+ during storage for 13 days. Platelet rich plasma-platelet concentrate with 35% plasma and 65% platelet additive solutions (Composol or SSP+) and a control group (100% plasma) were prepared. Swirling, platelet count, blood gases, metabolic variables, platelet activation markers, and apoptosis markers were analyzed on days 1, 5, 9 and 13. RESULTS: Swirling was well preserved and pH was acceptable (> 6.2) during storage for all platelet additive solutions units until day 9. SSP + units showed more stable pH and metabolic variables until day 13. Platelets in plasma showed higher glucose consumption than in Composol or in SSP+. The platelet additive solutions units showed better platelet metabolism maintenance, reduced glucose consumption and lactate production. The apoptotic markers were still low for 9 days in platelet concentrates with platelet additive solutions, suggesting the possibility to extend the shelf life with the use of SSP+ or Composol. CONCLUSIONS: Our findings suggest that the uses of Composol and SSP+ in canine platelet concentrates are potential alternatives in veterinary blood banks.
Asunto(s)
Plaquetas , Conservación de la Sangre/veterinaria , Medios de Cultivo , Perros/sangre , Animales , Plaquetas/fisiología , Medios de Cultivo/química , Estudios de Factibilidad , Recuento de Plaquetas , Soluciones/químicaRESUMEN
There is a need for an alternative approach for health promotion prisons since previous work has indicated that health education, while improving health knowledge, does not result in behaviour change. Evidence has suggested that a health coaching assists in this regard. However, the question remained whether this approach would be appropriate and possible in prisons? This paper presents the public health strategies used to work in partnership with prison management to address challenges and accept opportunities as a health coaching intervention protocol was developed for oral health and wellbeing in the prison setting.
Asunto(s)
Educación en Salud Dental/métodos , Promoción de la Salud , Salud Bucal , Prisioneros , Educación en Salud Dental/organización & administración , Promoción de la Salud/métodos , Promoción de la Salud/organización & administración , Humanos , EscociaRESUMEN
Objective.Brain-computer interfaces (BCIs) have the potential to reinstate lost communication faculties. Results from speech decoding studies indicate that a usable speech BCI based on activity in the sensorimotor cortex (SMC) can be achieved using subdurally implanted electrodes. However, the optimal characteristics for a successful speech implant are largely unknown. We address this topic in a high field blood oxygenation level dependent functional magnetic resonance imaging (fMRI) study, by assessing the decodability of spoken words as a function of hemisphere, gyrus, sulcal depth, and position along the ventral/dorsal-axis.Approach.Twelve subjects conducted a 7T fMRI experiment in which they pronounced 6 different pseudo-words over 6 runs. We divided the SMC by hemisphere, gyrus, sulcal depth, and position along the ventral/dorsal axis. Classification was performed on in these SMC areas using multiclass support vector machine (SVM).Main results.Significant classification was possible from the SMC, but no preference for the left or right hemisphere, nor for the precentral or postcentral gyrus for optimal word classification was detected. Classification while using information from the cortical surface was slightly better than when using information from deep in the central sulcus and was highest within the ventral 50% of SMC. Confusion matrices where highly similar across the entire SMC. An SVM-searchlight analysis revealed significant classification in the superior temporal gyrus and left planum temporale in addition to the SMC.Significance.The current results support a unilateral implant using surface electrodes, covering the ventral 50% of the SMC. The added value of depth electrodes is unclear. We did not observe evidence for variations in the qualitative nature of information across SMC. The current results need to be confirmed in paralyzed patients performing attempted speech.
Asunto(s)
Interfaces Cerebro-Computador , Imagen por Resonancia Magnética , Corteza Sensoriomotora , Habla , Adulto , Femenino , Humanos , Masculino , Análisis de Datos , Electrodos Implantados , Movimiento (Física) , Parálisis , Prótesis e Implantes , Corteza Sensoriomotora/anatomía & histología , Corteza Sensoriomotora/fisiología , Habla/fisiología , Máquina de Vectores de Soporte , Lóbulo Temporal/anatomía & histología , Lóbulo Temporal/fisiología , Mapeo EncefálicoRESUMEN
Background: This PICO-guided systematic review assessed continuous lateral rotation therapy (CLRT) versus conventional position changes in mechanically ventilated critically ill adults, evaluating mortality, intensive care unit (ICU) and hospital stay duration as primary outcomes, and respiratory function, mechanical ventilation duration, pulmonary complications, and adverse events, as secondary outcomes. Methods: A systematic review followed PRISMA criteria (PROSPERO CRD42022384258). Searches spanned databases: MEDLINE/PubMed, EMBASE, Scopus, ScienceDirect, Cochrane, CINAHL and Web of Science, without language or publication year restrictions. Inclusion criteria involved randomized (RCT) and quasi-randomized trials, comparing CLRT (intervention) with conventional position changes (control). Risk of bias and quality of evidence for RCTs were assessed using the Cochrane collaboration and GRADE tools. For the quasi-randomized trials, the ROBINS-I tool was used. Results: In 18 studies with 1.466 participants (intervention, n= 700, 47.7%; control, n= 766, 52.2%), CLRT was predominantly used for prophylactic purposes, with protocols varying from 10 to 24 hours/day. Meta-analysis (16 RCTs) favored CLRT for reduced mechanical ventilation duration (SMD -0.17 days, CI -0.29 to -0.04, p=0.008) and lower nosocomial pneumonia incidence (OR 0.39, CI 0.29 to 0.52, p<0.00001). CLRT showed no significant impact on mortality (OR 1.04, CI 0.80 to 1.34, p= 0.77), ICU stay (SMD -0.11 days, CI -0.25 to 0.02, p= 0.11), hospital stay (SMD -0.10 days, CI -0.31 to 0.11, p= 0.33) and incidence of pressure ulcers (OR 0.73, CI 0,34 to 1.60, p= 0.44). Conclusions: CLRT showed no significant difference in primary outcomes (mortality, ICU, and hospital stay duration) but revealed significant differences in secondary outcomes (consistently reduced nosocomial pneumonia, with a minor effect on MV duration), supported by moderate certainty. Very low certainty for other outcomes highlights the need for current studies in diverse clinical settings and protocols to assess CLRT effectiveness.
RESUMEN
Triatoma brasiliensis (Hemiptera: Reduviidae) is an important vector of Chagas' disease in both sylvatic and peridomestic ecotopes. Discriminating between these populations of Triatominae has been proposed as a means of investigating re-infestation rates of human dwellings. Geometric morphometrics have been widely applied in the study of Triatominae polymorphisms at species and population levels. This study characterizes morphometric differences between sylvatic and peridomestic populations, as well as between sexes in T. brasiliensis specimens from Jaguaruana, Ceará, in northeastern Brazil. No differences in either the shape or size of the cephalic capsule were apparent between sexes or ecotopes. However, the wings showed differentiation in shape and size. Sexual dimorphism was detected, with females presenting significantly higher values and conformations. Size differentiation was also evident, with sylvatic specimens being generally larger than peridomestic examples. These results indicate that differences in the wings of T. brasiliensis may be related to the existence of phenotypic plasticity, and variations in size and shape may be associated with different ecotopes, possibly as a result of conditions in each micro-habitat, such as temperature, relative humidity, food supply and density.
Asunto(s)
Insectos Vectores/anatomía & histología , Insectos Vectores/fisiología , Triatoma/anatomía & histología , Triatoma/fisiología , Adaptación Fisiológica , Animales , Brasil , Enfermedad de Chagas/epidemiología , Enfermedad de Chagas/parasitología , Ambiente , Femenino , Cabeza/anatomía & histología , Insectos Vectores/genética , Masculino , Fenotipo , Análisis de Componente Principal , Caracteres Sexuales , Triatoma/genética , Alas de Animales/anatomía & histologíaRESUMEN
The treatment of gastroesophageal reflux disease may be clinical or surgical. The clinical consists basically of the use of drugs; however, there are new techniques to complement this treatment, osteopathic intervention in the diaphragmatic muscle is one these. The objective of the study is to compare pressure values in the examination of esophageal manometry of the lower esophageal sphincter (LES) before and immediately after osteopathic intervention in the diaphragm muscle. Thirty-eight patients with gastroesophageal reflux disease - 16 submitted to sham technique and 22 submitted osteopathic technique - were randomly selected. The average respiratory pressure (ARP) and the maximum expiratory pressure (MEP) of the LES were measured by manometry before and after osteopathic technique at the point of highest pressure. Statistical analysis was performed using the Student's t-test and Mann-Whitney, and magnitude of the technique proposed was measured using the Cohen's index. Statistically significant difference in the osteopathic technique was found in three out of four in relation to the group of patients who performed the sham technique for the following measures of LES pressure: ARP with P= 0.027. The MEP had no statistical difference (P= 0.146). The values of Cohen d for the same measures were: ARP with d= 0.80 and MEP d= 0.52. Osteopathic manipulative technique produces a positive increment in the LES region soon after its performance.
Asunto(s)
Diafragma , Esfínter Esofágico Inferior/fisiopatología , Reflujo Gastroesofágico/fisiopatología , Reflujo Gastroesofágico/terapia , Osteopatía , Adulto , Anciano , Femenino , Humanos , Masculino , Manometría , Persona de Mediana Edad , Presión , RespiraciónRESUMEN
In this work we report on the results of the total K-shell X-ray production cross sections of Ti, Cr, Ni and Zn induced by Cl4+ and Cl5+ ions with energies ranging from 4 MeV to 10 MeV. The experimental results were compared with Atomic Orbitals Coupled-Channels (CC) calculations based on the independent electron model. The experimental X-ray production cross sections vary from about 10-2 barns for Zn up to 102 barns for Ti. The results obtained for Ti indicate that the present CC calculations underestimate the experimental cross sections up to two orders of magnitude at 10 MeV chlorine bombarding energy. However, the discrepancy between CC calculations and experimental results decreases as both bombarding energy and the atomic number of the target species increase. The dependency of the experiment-theory agreement on the asymmetry and adiabaticity parameters α and η respectively is discussed.
RESUMEN
INTRODUCTION: Set-up skin markings are performed, in several centers, for radiotherapy (RT) treatments. This study aimed to compare two permanent methods: lancets and an electric marking pen, the Comfort Marker 2.0® (CM). METHODS: This was a prospective, unicentric, randomized study. Patients aged 18 years or older referred to our department to receive RT were recruited. Patients were randomly assigned, in a 1:1 ratio, to receive set-up markings using lancets or CM. The markings arrangement followed our departmental protocols. The coprimary endpoints were patients' comfort and effectiveness. Secondary endpoints included radiation therapists (RTTs) satisfaction and cosmesis. RESULTS: Between October 2021 and January 2022, 100 patients were enrolled (50 received lancets and 50 CM) and assessed for the comfort and satisfaction outcomes. CM was significantly less painful than the lancets, with 44% and 16% of the patients, respectively, considering the tattooing process painless (RR = 2.75; 95% IC: 1.36 - 5.58). On the RTT-reported satisfaction, CM had significantly easier processes than lancets (98.0% vs. 78.0%, respectively; RR = 1.26; 95% CI: 1.08 - 1.46). For effectiveness and cosmesis assessment, 98 patients were analyzed (48 received lancets and 50 CM). Patients receiving CM had a significantly higher proportion of markings graded as good and excellent compared to those receiving lancets (98.0% and 50.0%, respectively, had ≥75% of the tattoos assessed as good/excellent, RR = 1.96; 95% CI: 1.47 - 2.61). On the cosmetic evaluation, patients receiving CM had significantly better cosmetic markings, with a median score of 4.4 (vs. 3.5 for lancets, p <0.001). CONCLUSION: The trial results demonstrated that tattooing with the CM is significantly less painful, more effective, easier to apply, and cosmetically superior to tattooing with lancets. IMPLICATIONS FOR PRACTICE: Tattooing with CM allows for better results regarding pain, quality, ease and cosmesis.
Asunto(s)
Tatuaje , Humanos , Estudios Prospectivos , Tatuaje/métodosRESUMEN
Knowledge of the vertical and horizontal distribution of Aphis gossypii Glover (Hemiptera: Aphididae) on genetically modified cotton plants over time could help optimize decision-making in integrated cotton aphid management programs. Therefore, the aim of the present study was to determine the vertical and horizontal distribution of A. gossypii in non-transgenic Bt cotton and transgenic Bt-cotton over time during two cotton seasons by examining plants throughout the seasons. There was no significant interaction between years and cotton cultivar treatments for apterous or alate aphids. Considering year-to-year data, analyses on season-long averages of apterous or alate aphids showed that aphid densities per plant did not differ among years. The number of apterous aphids found per plant for the Bt transgenic cultivar (2427 apterous aphids per plant) was lower than for its isoline (3335 apterous aphids per plant). The number of alate aphids found per plant on the Bt transgenic cultivar (12.28 alate aphids per plant) was lower than for the isoline (140.56 alate aphids per plant). With regard to the vertical distribution of apterous aphids or alate aphids, there were interactions between cotton cultivar, plant age and plant region. We conclude that in comparison to non-Bt cotton (DP 4049), Bt cotton (DP 404 BG (Bollgard)) has significant effects on the vertical, horizontal, spatial and temporal distribution patterns of A. gossypii, showing changes in its distribution behaviour inside the plant as the cotton crop develops. The results of our study are relevant for understanding the vertical and horizontal distribution of A. gossypii on Bt cotton cultivar (DP 404 BG (Bollgard)) and on its isoline (DP 4049), and could be useful in decision-making, implementing controls and determining the timing of population peaks of this insect.
Asunto(s)
Áfidos/crecimiento & desarrollo , Bacillus thuringiensis/fisiología , Proteínas Bacterianas/genética , Endotoxinas/genética , Gossypium/genética , Proteínas Hemolisinas/genética , Control Biológico de Vectores , Animales , Áfidos/efectos de los fármacos , Áfidos/fisiología , Toxinas de Bacillus thuringiensis , Proteínas Bacterianas/farmacología , Brasil , Endotoxinas/farmacología , Conducta Alimentaria , Gossypium/crecimiento & desarrollo , Gossypium/metabolismo , Proteínas Hemolisinas/farmacología , Insecticidas/farmacología , Plantas Modificadas Genéticamente/genética , Plantas Modificadas Genéticamente/crecimiento & desarrollo , Plantas Modificadas Genéticamente/metabolismo , Dinámica Poblacional , Estaciones del Año , Factores de TiempoRESUMEN
The fennel aphid, Hyadaphis foeniculi (Passerini) (Hemiptera: Aphididae) is a major pest of fennel, Foeniculum vulgare Miller in northeast region of Brazil. We hypothesize that intercropping can be used as an alternative pest management strategy to reduce aphid yield loss in fennel. Thus, we investigated the severity of fennel plant damage in relation to infestation by the fennel aphid and predation by Cycloneda sanguinea (L.) (Coleoptera: Coccinellidae) (spotless lady beetle), green lacewing, Chrysoperla carnea (Stephens) (Neuroptera: Chrysopidae), and Scymnus spp. (Coleoptera: Coccinellidae) in sole fennel plots and plots of fennel intercropped with cotton with colored fibers. The fennel aphid populations in nontreated plots were significantly larger in sole fennel plots than in intercropped plots. The highest densities of C. sanguinea, green lacewings and Scymnus spp., associated with the suppression of fennel aphid populations was found in fennel in the intercropping systems. Fennel aphids reduced the fennel seed yield by 80% in the sole fennel plots compared with approximately 30% for all intercropping systems. The results obtained in this research are of practical significance for designing appropriate strategies for fennel aphid control in fennel-cotton intercropping systems. In summary, intercropping fennel with cotton with colored fibers apparently promoted biocontrol of fennel aphid in fennel.
Asunto(s)
Áfidos/fisiología , Foeniculum , Insectos/fisiología , Control Biológico de Vectores/métodos , Agricultura , Animales , Brasil , Escarabajos/fisiología , Color , Cadena Alimentaria , Gossypium , Densidad de Población , Especificidad de la EspecieRESUMEN
Anticarsia gemmatalis Hünber, 1818 is one of the main defoliating species in the soybean crop. Bacillus thuringiensis Berliner, 1915, is a bacterium used in the biological control of this pest species. Resistant populations and their sublethal effects caused by the use of the bacteria have already been reported; however, there are no studies on phenotypic plasticity in adulthood exposed to Bt-based bioinsecticide sub-doses. This study aimed to evaluate the morphometry of A. gemmatalis adults under laboratory conditions submitted to the Bt-based bioinsecticide Dipel® over the three generations. The body segments mensuread were width, length, and area of the anterior and posterior wings, the weight of the integument, chest, abdomen, wings, and the whole adult of males and females. Among the treatments, LC5 in the first generation and LC10 in the second generation were those with lower thresholds in relation to the weight of the chest and abdomen, considering the proportions of the body smaller than the females. The female's weight adulthood was reduced by 10% about males, and, only in the first generation. Males have larger body size and more pronounced phenotypic plasticity than females. Here, we demonstrate the first study assessing the phenotypic plasticity of A. gemmatalis adults.
Asunto(s)
Bacillus thuringiensis , Mariposas Nocturnas , Adaptación Fisiológica , Animales , Femenino , Proteínas Hemolisinas/farmacología , Masculino , Glycine maxRESUMEN
The currently existing sample procedures available for decision-making regarding the control of the coffee berry borer Hypothenemus hampei (Ferrari) (Coleoptera: Curculionidae: Scolytinae) are time-consuming, expensive, and difficult to perform, compromising their adoption. In addition, the damage functions incorporated in such decision levels only consider the quantitative losses, while dismissing the qualitative losses. Traps containing ethanol, methanol, and benzaldehyde may allow cheap and easy decision-making. Our objective was to determine the economic injury level (EIL) for the adults of the coffee berry borer by using attractant-baited traps. We considered both qualitative and quantitative losses caused by the coffee borer in estimating the EILs. These EILs were determined for conventional and organic coffee under high and average plant yield. When the quantitative losses caused by H. hampei were considered alone, the EILs ranged from 7.9 to 23.7% of bored berries for high and average-yield conventional crops, respectively. For high and average-yield organic coffee the ELs varied from 24.4 to 47.6% of bored berries, respectively. When qualitative and quantitative losses caused by the pest were considered together, the EIL was 4.3% of bored berries for both conventional and organic coffee. The EILs for H. hampei associated to the coffee plants in the flowering, pinhead fruit, and ripening fruit stages were 426, 85, and 28 adults per attractive trap, respectively.