Effect of an Experimental Paste with Hydroxyapatite Nanoparticles and Fluoride on Dental Demineralisation and Remineralisation in situ.

This study evaluated the effect of an experimental paste containing hydroxyapatite in nanoparticles (nano-HA)/fluoride on dental de-remineralisation in situ. Thirteen subjects took part in this crossover/randomised/double-blind study performed in 4 phases (14 days each). Four sound and 4 pre-demineralised specimens were worn intraorally at each phase corresponding to the following treatments: Nanop Plus (10% HA, 0.2% NaF, nano-HA/fluoride), MI Paste Plus (casein phosphopeptide-amorphous calcium phosphate, 0.2% NaF), F (0.2% NaF) and placebo. Two-hundred and forty enamel and 240 dentine specimens were selected by using surface microhardness; half of them were subjected to pre-demineralisation and the other half remained sound. Sound specimens were further exposed to severe cariogenic challenge (20% sucrose in biofilm) in situ, while pre-demineralised specimens were not. All specimens were exposed to fluoride dentifrice slurry 2×1 min/day. Thereafter, the treatments were done for 4 min. The de-remineralisation was quantified by transversal microradiography. The data were statistically analysed by repeated-measures ANOVA/Tukey's tests (p<0.05). Generally, no huge differences were found among the treatments. However, Nanop Plus was the only treatment able to significantly reduce dentine demineralisation (x0394;Z, integrated mineral loss) and to improve enamel remineralisation (x0394;x0394;Z, integrated mineral uptake) compared to placebo. No treatments were able to reduce enamel demineralisation, while for dentine remineralisation all treatments were similarly effective in improving x0394;x0394;Z compared to placebo. Nanop Plus seems to have a positive influence on dental de-remineralisation, which should be further confirmed.

Physical-chemical characterization and bond strength to zirconia of dental adhesives with different monomer mixtures and photoinitiator systems light-activated with poly and monowave devices.

Introduction: Bonding to crystalline zirconia is currently a challenge. Properly cured adhesives are crucial to optimize this bond, and that in turn is influenced by the initial mobility of the system, as well as by the reactivity of the initiators. Aim: This study aimed to characterize adhesives containing monomer mixtures of different viscosities and double and triple photoinitiator systems; and to evaluate the bonding to Y-TZP zirconia, when adhesives were light-activated with monowave or polywave light-curing units (LCU). Materials and methods: Adhesives were formulated at a 1:1 weight proportion of Bis-GMA/TEGDMA or Bis-GMA/Bis-EMA. To these mixtures 0.5 wt% of CQ, 0.5-1.0 wt% of DABE, 0.5-1.0 wt% of DPIHP, or 0.5-1.0 wt% of TAS-Sb were added and used as photoinitiator systems. A total of ten adhesives were prepared. Resin composite cylinders were cemented on zirconia slices and 6000 thermal cycles were performed. Degree of conversion (DC), sorption (SO) and solubility (SL) after 7 days of water storage, and microshear bond strength (µSBS) were evaluated. Data were analyzed with three-way ANOVA and Tukey's HSD (α = 0.05). Results: Bis-GMA/Bis-EMA combined with either CQ/DABE or CQ/DABE/TAS-Sb presented the highest DC, and no significant differences were observed for LCUs (p = .298). CQ/DABE < CQ/DABE/TAS-Sb ≈ CQ/DABE/DPIHP and the polywave LCU showed smaller overall SO (p < .05). Bis-GMA/TEGDMA with CQ/DABE cured with the polywave LCU presented the lowest SO. SL varied as follows: CQ/DABE/TAS-Sb < CQ/DABE/DPIHP < CQ/DABE (p < .001). For µSBS, only the factor photoinitiator system was significant (p = .045). All mean values were above 30 MPa, with higher values being observed for BIS-GMA/TEGDMA and CQ/DABE. Conclusion: It can be concluded that the adhesive containing CQ/DABE/TAS-Sb as coinitiator of Bis-GMA/Bis-EMA mixtures produced a material with higher DC and lower SL, while bond strength values were similar to the ones obtained by CQ/DABE.

Analysis of the antimicrobial and anti-caries effects of TiF4 varnish under microcosm biofilm formed on enamel.

Titanium tetrafluoride (TiF4) is known for interacting with enamel reducing demineralization. However, no information is available about its potential antimicrobial effect. OBJECTIVES: This study evaluated the antimicrobial and anti-caries potential of TiF4 varnish compared to NaF varnish, chlorhexidine gel (positive control), placebo varnish and untreated (negative controls) using a dental microcosm biofilm model. MATERIAL AND METHODS: A microcosm biofilm was produced on bovine enamel previously treated with the varnishes, using inoculum from human saliva mixed with McBain saliva, under 0.2% sucrose exposure, for 14 days. All experiments were performed in biological triplicate (n=4/group in each experiment). Factors evaluated were: bacterial viability (% dead and live bacteria); CFU counting (log10 CFU/mL); and enamel demineralization (transverse microradiography - TMR). Data were analysed using ANOVA/Tukey's test or Kruskal-Wallis/Dunn's test (p<0.05). RESULTS: Only chlorhexidine significantly increased the number of dead bacteria (68.8±13.1% dead bacteria) compared to untreated control (48.9±16.1% dead bacteria). No treatment reduced the CFU counting (total microorganism and total streptococci) compared to the negative controls. Only TiF4 was able to reduce enamel demineralization (ΔZ 1110.7±803.2 vol% µm) compared to both negative controls (untreated: ΔZ 4455.3±1176.4 vol% µm). CONCLUSIONS: TiF4 varnish has no relevant antimicrobial effect. Nevertheless, TiF4 varnish was effective in reducing enamel demineralization under this model.

Color evaluation of white spot lesions treated with resin infiltration after water or grape juice storage

Aim: To evaluate the color stability of bovine enamel with artificial white spot lesions treated with resin infiltration (ICON) or remineralization with fluoride using two storage methods. Methods: Sixty incisors were submitted to artificial white spot lesion induced by demineralization-remineralization (DE-RE) cycling. Initial color was evaluated with CIE-Lab to measure ΔEab. Demineralized teeth were divided according to the treatment of the white spot lesion (n = 20): 1) Remineralization with 2% neutral fluoride gel for 4min (control); 2) ICON application following manufacturer's recommendations; and 3) ICON with decreased drying time after the application of ethanol. After 24h, color was evaluated and samples were subdivided (n = 10) according to storage: 1) distilled water for 1 month; 2) grape juice for 10min daily. After storage, color was evaluated. L*, a* and b* data were analyzed by one-way ANOVA and ∆Eab data by two-way ANOVA followed by Tukey's HSD (α = 0.05). Results: L* was affected by juice storage, and decreased when ICON was applied with decreased drying time after the ethanol application. The same behavior occurred with a* (increase with reduced drying time), while b* was not affected. For ∆Eab significant differences were observed between groups (p = 0.0219) and storage methods (p = 0.0007). There was no interaction effect (p = 0.1118). Remineralization with fluoride presented the lowest color changes after storage in water. Conclusion: Treatment of artificial carious lesions with resin infiltration presented greater color changes than fluoride remineralization after storage in both solutions in vitro

Analysis of the antimicrobial and anti-caries effects of TiF4 varnish under microcosm biofilm formed on enamel

Abstract Titanium tetrafluoride (TiF4) is known for interacting with enamel reducing demineralization. However, no information is available about its potential antimicrobial effect. Objectives This study evaluated the antimicrobial and anti-caries potential of TiF4 varnish compared to NaF varnish, chlorhexidine gel (positive control), placebo varnish and untreated (negative controls) using a dental microcosm biofilm model. Material and Methods A microcosm biofilm was produced on bovine enamel previously treated with the varnishes, using inoculum from human saliva mixed with McBain saliva, under 0.2% sucrose exposure, for 14 days. All experiments were performed in biological triplicate (n=4/group in each experiment). Factors evaluated were: bacterial viability (% dead and live bacteria); CFU counting (log10 CFU/mL); and enamel demineralization (transverse microradiography - TMR). Data were analysed using ANOVA/Tukey's test or Kruskal-Wallis/Dunn's test (p<0.05). Results Only chlorhexidine significantly increased the number of dead bacteria (68.8±13.1% dead bacteria) compared to untreated control (48.9±16.1% dead bacteria). No treatment reduced the CFU counting (total microorganism and total streptococci) compared to the negative controls. Only TiF4 was able to reduce enamel demineralization (ΔZ 1110.7±803.2 vol% μm) compared to both negative controls (untreated: ΔZ 4455.3±1176.4 vol% μm). Conclusions TiF4 varnish has no relevant antimicrobial effect. Nevertheless, TiF4 varnish was effective in reducing enamel demineralization under this model.

Diagnóstico diferencial entre periodontite apical e cisto do ducto nasopalatino: relato de caso / Differential diagnosis of apical periodontitis and nasopalatine duct cyst: case report

A presença de uma alteração óssea periapical na região anterior da maxila, mais precisamente entre os incisivos superiores, pode ser erroneamente confundida com uma periodontite apical (AP) ou um cisto do ducto nasopalatino (CDNP). O diagnóstico diferencial é de suma importância para definir o tratamento adequado. O exame clínico, mais especificamente o teste de sensibilidade pulpar, é de suma importância, pois dentes portadores de periodontite apical não respondem ao teste, diferentemente dos casos de cisto do ducto nasopalatino. Uma paciente com 48 anos de idade, sexo feminino, compareceu à clínica de Endodontia com inchaço na região de palato e fundo de sulco anterior, relatando dor aguda ao redor dos incisivos centrais, sendo submetida a exames clínicos e radiográficos. Os exames clínicos mostraram ausência de vitalidade pulpar e as radiografias evidenciaram uma área radiolúcida simétrica na região de linha média, que poderia ser uma lesão endodôntica ou um CDNP. Durante o tratamento endodôntico, foi observada comunicação entre o canal radicular e a lesão periapical, sugerindo uma lesão de origem endodôntica. O tratamento endodôntico foi realizado e, após oito meses de acompanhamento, foi possível observar regressão da lesão. Este caso evidencia a importância de um diagnóstico diferencial preciso entre PA e CDNP, para planejar o tratamento adequado e favorecer o reparo dos tecidos periodontais.