Direct quantitative imaging of the writing stage in a photosensitive azopolymer by digital holography.

In this paper, we demonstrated that the gradual formation of a surface relief grating (SRG) in azopolymer thin films under continuous light exposure could be directly observed in situ and in real-time, allowing full-field characterization with high spatial resolution. We reported here for the first time, to the best of our knowledge, that digital holography (DH) can be adopted for investigating and monitoring an inscribed holographic surface relief grating (SRG) of azopolymers by two-beam laser interference lithography over a wide area. The writing process could be assessed through quantitative phase imaging (QPI). The reported results show that the proposed method is a truly valuable diagnostic tool that can be useful for investigating the spatial distribution of the writing process, which can eventually contribute to shedding light on the still unclear origin and related mechanism of SRG formation in azopolymers.

Phase contrast tomography at lab on chip scale by digital holography.

High-throughput single-cell analysis is a challenging target for implementing advanced biomedical applications. An excellent candidate for this aim is label-free tomographic phase microscopy (TPM). In this paper, some of the methods used to obtain TPM are reviewed, analyzing advantages and disadvantages of each of them. Moreover, an alternative tomographic technique is described for live cells analysis, and future trends of the method are foreseen. In particular, by exploiting random rolling of cells while they are flowing along a microfluidic channel, it is possible to obtain phase-contrast tomography thus obtaining complete retrieval of both 3D-position and orientation of rotating cells. Thus, a priori knowledge of such information is no longer needed. This approach extremely simplifies the optical system avoiding any mechanical/optical scanning of light source. The proof is given for different classes of biosamples, red-blood-cells (RBCs) and diatom algae. Accurate characterization of each type of cells is reported and compared to that obtained by other tomographic techniques.

Resolution gain in space-time digital holography by self-assembling of the object frequencies.

Space-time digital holography (STDH) exploits the object motion to record the hologram in a hybrid ST domain. This representation adds new capabilities to conventional DH, e.g., unlimited field of view and variable phase shifting. This is the best candidate for imaging biological samples flowing in microfluidic channels. Here, we show that STDH is able to improve the spatial resolution as well. Different from other super-resolution approaches, stitching between holograms or their spectra is no longer required. Moreover, we introduce a new oblique STDH modality to record and process hybrid ST representations. This allows improving resolution in 2D with one single object scan, paving the way to the use of STDH for super-resolution imaging onboard microfluidic devices.

Digital holography as 3D tracking tool for assessing acoustophoretic particle manipulation.

The integration of digital holography (DH) imaging and the acoustic manipulation of micro-particles in a microfluidic environment is investigated. The ability of DH to provide efficient 3D tracking of particles inside a microfluidic channel is exploited to measure the position of multiple objects moving under the effect of stationary ultrasound pressure fields. The axial displacement provides a direct verification of the numerically computed positions of the standing wave's node, while the particles' transversal movement highlights the presence of nodes in the planar direction. Moreover, DH is used to follow the aggregation dynamics of trapped spheres in such nodes by using aggregation rate metrics.

Spiral formation at the microscale by µ-pyro-electrospinning.

Spiral shapes occur frequently in nature as in the case of snail shells or the cochlea - the auditory portion of the inner ear. They also inspire many technological devices that take advantage of this geometry. Here we show that µ-pyro-electrospinning is able to control whipping instabilities in order to form spiralling fibres (down to 300 nm thick) directly on a support with true microscale regularity. The results show that polymer concentration plays a key role in producing reliable and long spirals. We investigate the cell response to these spiral templates that, thanks to their true regularity, would be useful for developing innovative cochlea regeneration scaffolds.

Surface plasmon resonance imaging by holographic enhanced mapping.

We designed, constructed and tested a holographic surface plasmon resonance (HoloSPR) objective-based microscope for simultaneous amplitude-contrast and phase-contrast surface plasmon resonance imaging (SPRi). SPRi is a widely spread tool for label-free detection of changes in refractive index and concentration, as well as mapping of thin films. Currently, most of the SPR sensors rely on the detection of amplitude or phase changes of light. Despite the high sensitivities achieved so far, each technique alone has a limited detection range with optimal sensitivity. Here we use a high numerical aperture objective that avoids all the limitations due to the use of a prism-based configuration, yielding highly magnified and distortion-free images. Holographic reconstructions of SPR images and real-time kinetic measurements are presented to show the capability of HoloSPR to provide a versatile imaging method for high-throughput SPR detection complementary to conventional SPR techniques.

Self-propelling bacteria mimic coherent light decorrelation.

We show here that live e-coli bacterial culture, thanks to the self-propelling feature, can significantly reduce the coherent noise. In fact, the typical self-propelled drive of such microorganisms provides enough time diversity in speckle patterns. Optical properties of a bacteria suspension have been investigated and analyzed thus showing that it behaves as a quite good optical speckle decorrelation device. Samples with different bacteria densities have been studied. The decorrelation effect has been demonstrated by probing the imaging performance in through transmission in coherent microscope configuration.

Spatio-temporal scanning modality for synthesizing interferograms and digital holograms.

We investigate the spatio-temporal scanning of a single-pixel row for building up synthetic interferograms or digital holograms, shifted each other of a desired phase step. This unusual recording modality exploits the object movement to synthesize interferograms with extended Field of View and improved noise contrast. We report the theoretical formulation of the synthetizing recording process and experimental evidence of various cases demonstrating quantitative phase retrieval by adopting this intrinsic phase-shifting procedure. The proposed method could be particularly suited in all cases where the object shift is an intrinsic feature of the investigated system, as e.g. in microfluidics imaging.

Mid-infrared digital holography and holographic interferometry with a tunable quantum cascade laser.

Mid-infrared digital holography based on CO2 lasers has proven to be a powerful coherent imaging technique due to reduced sensitivity to mechanical vibrations, increased field of view, high optical power, and possible vision through scattering media, e.g., smoke. Here we demonstrate a similar and more compact holographic system based on an external cavity quantum cascade laser emitting at 8 µm. Such a setup, which includes a highly sensitive microbolometric camera, allows the acquisition of speckle holograms of scattering objects, which can be processed in real time. In addition, by exploiting the broad laser tunability, we can acquire holograms at different wavelengths, from which we extract phase images not subjected to phase wrapping, at synthetic wavelengths ranging from hundreds of micrometers to several millimeters.

Digital holographic microscopy for the evaluation of human sperm structure.

The morphology of the sperm head has often been correlated with the outcome of in vitro fertilization, and has been shown to be the sole parameter in semen of value in predicting the success of intracytoplasmic sperm injection and intracytoplasmic morphologically selected sperm injection. In this paper, we have studied whether digital holographic microscopy (DHM) may be useful to obtain quantitative data on human sperm head structure and compared this technique with high-power digitally enhanced Nomarski optics. The main advantage of digital holography is that high-resolution three-dimensional quantitative sample imaging may be automatically produced by numerical refocusing of a two-dimensional image at different object planes without any mechanical scanning. We show that DHM generates useful information on the dimensions and structure of human sperm, not revealed by conventional phase-contrast microscopy, in particular the volume of vacuoles, and suggest its use as an additional prognostic tool in assisted reproduction technology.

Imaging through scattering microfluidic channels by digital holography for information recovery in lab on chip.

We tackle the problem of information recovery and imaging through scattering microfluidic chips by means of digital holography (DH). In many cases the chip can become opalescent due to residual deposits settling down the inner channel faces, biofilm formation, scattering particle uptake by the channel cladding or its damaging by corrosive substances, or even by condensing effect on the exterior channels walls. In these cases white-light imaging is severely degraded and no information is obtainable at all about the flowing samples. Here we investigate the problem of counting and estimating velocity of cells flowing inside a scattering chip. Moreover we propose and test a method based on the recording of multiple digital holograms to retrieve improved phase-contrast images despite the strong scattering effect. This method helps, thanks to DH, to recover information which, otherwise, would be completely lost.

Imaging live humans through smoke and flames using far-infrared digital holography.

The ability to see behind flames is a key challenge for the industrial field and particularly for the safety field. Development of new technologies to detect live people through smoke and flames in fire scenes is an extremely desirable goal since it can save human lives. The latest technologies, including equipment adopted by fire departments, use infrared bolometers for infrared digital cameras that allow users to see through smoke. However, such detectors are blinded by flame-emitted radiation. Here we show a completely different approach that makes use of lensless digital holography technology in the infrared range for successful imaging through smoke and flames. Notably, we demonstrate that digital holography with a cw laser allows the recording of dynamic human-size targets. In this work, easy detection of live, moving people is achieved through both smoke and flames, thus demonstrating the capability of digital holography at 10.6 µm.

Random resampling masks: a non-Bayesian one-shot strategy for noise reduction in digital holography.

Holographic imaging may become severely degraded by a mixture of speckle and incoherent additive noise. Bayesian approaches reduce the incoherent noise, but prior information is needed on the noise statistics. With no prior knowledge, one-shot reduction of noise is a highly desirable goal, as the recording process is simplified and made faster. Indeed, neither multiple acquisitions nor a complex setup are needed. So far, this result has been achieved at the cost of a deterministic resolution loss. Here we propose a fast non-Bayesian denoising method that avoids this trade-off by means of a numerical synthesis of a moving diffuser. In this way, only one single hologram is required as multiple uncorrelated reconstructions are provided by random complementary resampling masks. Experiments show a significant incoherent noise reduction, close to the theoretical improvement bound, resulting in image-contrast improvement. At the same time, we preserve the resolution of the unprocessed image.

Spontaneous assembly of carbon-based chains in polymer matrixes through surface charge templates.

Stable chains of carbon-based nanoparticles were formed directly in polymer matrixes through an electrode-free approach. Spontaneous surface charges were generated pyroelectrically onto functionalized ferroelectric crystals, enabling the formation of electric field gradients that triggered the dipole-dipole interactions responsible for the alignment of the particles, while embedded in the polymer solution. The phenomenon is similar to the dielectrophoretic alignment of carbon nanotubes reported in the literature. However, here the electric fields are generated spontaneously by a simple heat treatment that, simultaneously, aligns the particles and provides the energy necessary for curing the host polymer. The result is a polymer sheet reinforced with well-aligned chains of carbon-based particles, avoiding the invasive implementation of appropriate electrodes and circuits. Because polymers with anisotropic features are of great interest for enhancing the thermal and/or the electrical conductivity, the electrode-free nature of this technique would improve the scaling down and the versatility of those interconnections that find applications in many fields, such as electronics, sensors, and biomedicine. Theoretical simulations of the interactions between the particles and the charge templates were implemented and appear in good agreement with the experimental results. The chain formation was characterized by controlling different parameters, including surface charge configuration, particle concentration, and polymer viscosity, thus demonstrating the reliability of the technique. Moreover, micro-Raman spectroscopy and scanning electron microscopy were used for a thorough inspection of the assembled chains.

Graded-size microlens array by the pyro-electrohydrodynamic continuous printing method.

In the present work, the pyro-electrohydrodynamic technique was used for the realization of tunable-size microlens arrays. Poly(methyl methacrylate) dissolved in different solvent mixtures was used as the polymeric material for the realization of the microstructures. By controlling the experimental parameters and in particular, the volume of the drop reservoir, graded-size square arrays of tens of microlenses with focal length in the range 1.5-3 mm were produced. Moreover, the optical quality and geometrical features were investigated by profilometric and interferometric analysis.

AI-aided holographic flow cytometry for label-free identification of ovarian cancer cells in the presence of unbalanced datasets.

Liquid biopsy is a valuable emerging alternative to tissue biopsy with great potential in the noninvasive early diagnostics of cancer. Liquid biopsy based on single cell analysis can be a powerful approach to identify circulating tumor cells (CTCs) in the bloodstream and could provide new opportunities to be implemented in routine screening programs. Since CTCs are very rare, the accurate classification based on high-throughput and highly informative microscopy methods should minimize the false negative rates. Here, we show that holographic flow cytometry is a valuable instrument to obtain quantitative phase-contrast maps as input data for artificial intelligence (AI)-based classifiers. We tackle the problem of discriminating between A2780 ovarian cancer cells and THP1 monocyte cells based on the phase-contrast images obtained in flow cytometry mode. We compare conventional machine learning analysis and deep learning architectures in the non-ideal case of having a dataset with unbalanced populations for the AI training step. The results show the capacity of AI-aided holographic flow cytometry to discriminate between the two cell lines and highlight the important role played by the phase-contrast signature of the cells to guarantee accurate classification.

An automatic method for assembling a large synthetic aperture digital hologram.

A major issue so far for digital holography is the low spatial resolution generally achieved. The numerical aperture is limited by the area of currently available detectors, such as CCD sensors, which is significantly lower than that of a holographic plate. This is an even more severe constraint when IR sensors such as microbolometers are taken into account. In order to increase the numerical aperture of such systems, we developed an automatic technique which is capable of recording several holograms and of stitching them together, obtaining a digital hologram with a synthetic but larger numerical aperture. In this way we show that more detail can be resolved and a wider parallax angle can be achieved. The method is demonstrated for visible as well IR digital holography, recording and displaying large size objects.

Multi-wavelengths digital holography: reconstruction, synthesis and display of holograms using adaptive transformation.

A method based on spatial transformations of multiwavelength digital holograms and the correlation matching of their numerical reconstructions is proposed, with the aim to improve superimposition of different color reconstructed images. This method is based on an adaptive affine transform of the hologram that permits management of the physical parameters of numerical reconstruction. In addition, we present a procedure to synthesize a single digital hologram in which three different colors are multiplexed. The optical reconstruction of the synthetic hologram by a spatial light modulator at one wavelength allows us to display all color features of the object, avoiding loss of details.

Printing of polymer microlenses by a pyroelectrohydrodynamic dispensing approach.

The investigation of a method for fabricating microlenses by a nozzle-free inkjet printing approach is reported. The new method, based on a pyroelectrohydrodynamic mechanism, is also able to dispense viscous liquids and to draw liquid phase drops directly from the reservoir. Specifically, by dispensing optical grade polymer dissolved in different solvent mixtures, microlenses were printed with a pattern defined directly through this deposition method. The reliability of the microlenses and the tunability of their focal properties were demonstrated through profilometric and inteferometric analyses.

Visible reconstruction by a circular holographic display from digital holograms recorded under infrared illumination.

A circular holographic display that consists of phase-only spatial light modulators is used to reconstruct images in visible light from digital holograms recorded under infrared (10.6 µm) illumination. The reconstruction yields a holographic digital video display of a three-dimensional ghostlike image of an object floating in space where observers can move and rotate around it.