RESUMEN
Disinfection byproducts (DBPs) are ubiquitous contaminants present in nearly all drinking water and are associated with adverse health effects in human epidemiologic studies. The most toxic DBPs are unregulated and often occur at concentrations well below regulated DBPs; thus, quantification at low parts-per-trillion (ng/L) levels is critical in assessing exposure. We developed a new liquid-liquid extraction-gas chromatography-tandem mass spectrometry (LLE-GC-MS/MS) method with the first analysis by tandem gas chromatography-mass spectrometry of 23 priority unregulated DBPs including 13 haloacetamides, 3 haloacetic acids, 2 haloacetonitriles, 1 haloacetaldehyde, 2 haloketones, and 2 halonitromethanes. When combined with our previous GC-MS/MS method for haloacetic acids and previously reported MS/MS transitions that we optimized for this method, the analysis of 62 regulated and priority unregulated DBPs at lower quantification limits is achieved. Limits of quantification for most DBPs were between 5 and 30 ng/L with r2 > 0.99 and an average of 9 times lower limits of quantification (LOQs) compared to LLE-GC-MS using selected ion monitoring (SIM). Relative standard deviations ranged from 0.7 to 30% for 61 DBPs in spiked samples. This new method was validated using tap waters from four US cities, where individual DBP concentrations ranged from 5 to 126,882 ng/L. This project provides the most comprehensive GC-MS/MS method for DBP analysis to date and is capable of analyzing volatile and semivolatile DBPs across nine different compound classes, including a class not previously analyzed by GC-MS/MS.
Asunto(s)
Desinfección , Agua Potable , Cromatografía de Gases y Espectrometría de Masas , Espectrometría de Masas en Tándem , Contaminantes Químicos del Agua , Espectrometría de Masas en Tándem/métodos , Agua Potable/análisis , Agua Potable/química , Contaminantes Químicos del Agua/análisis , Cromatografía de Gases y Espectrometría de Masas/métodos , Desinfectantes/análisis , Extracción Líquido-Líquido , HumanosRESUMEN
Iodized table salt provides iodide that is essential for health. However, during cooking, we found that chloramine residuals in tap water can react with iodide in table salt and organic matter in pasta to form iodinated disinfection byproducts (I-DBPs). While naturally occurring iodide in source waters is known to react with chloramine and dissolved organic carbon (e.g., humic acid) during the treatment of drinking water, this is the first study to investigate I-DBP formation from cooking real food with iodized table salt and chloraminated tap water. Matrix effects from the pasta posed an analytical challenge, necessitating the development of a new method for sensitive and reproducible measurements. The optimized method utilized sample cleanup with Captiva EMR-Lipid sorbent, extraction with ethyl acetate, standard addition calibration, and analysis using gas chromatography (GC)-mass spectrometry (MS)/MS. Using this method, seven I-DBPs, including six iodo-trihalomethanes (I-THMs) and iodoacetonitrile, were detected when iodized table salt was used to cook pasta, while no I-DBPs were formed with Kosher or Himalayan salts. Total I-THM levels of 11.1 ng/g in pasta combined with cooking water were measured, with triiodomethane and chlorodiiodomethane dominant, at 6.7 and 1.3 ng/g, respectively. Calculated cytotoxicity and genotoxicity of I-THMs for the pasta with cooking water were 126- and 18-fold, respectively, compared to the corresponding chloraminated tap water. However, when the cooked pasta was separated (strained) from the pasta water, chlorodiiodomethane was the dominant I-THM, and lower levels of total I-THMs (retaining 30% of the I-THMs) and calculated toxicity were observed. This study highlights an overlooked source of exposure to toxic I-DBPs. At the same time, the formation of I-DBPs can be avoided by boiling the pasta without a lid and adding iodized salt after cooking.
Asunto(s)
Desinfectantes , Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Desinfección/métodos , Cloruro de Sodio Dietético , Cloraminas/análisis , Yoduros/química , Agua Potable/análisis , Agua Potable/química , Halogenación , Culinaria , Contaminantes Químicos del Agua/toxicidad , Purificación del Agua/métodos , Desinfectantes/análisisRESUMEN
Per- and polyfluoroalkyl substances (PFAS) are environmental contaminants of concern due to their long persistence in the environment, toxicity, and widespread presence in humans and wildlife. Knowledge regarding the extent of PFAS contamination in the environment is limited due to the need for analytical methods that can reliably quantify all PFAS, since traditional target methods using liquid chromatography (LC)-mass spectrometry (MS) fail to capture many. For a more comprehensive analysis, a total organic fluorine (TOF) method can be used as a screening tool. We combined TOF analysis with target LC-MS/MS analysis to create a statewide PFAS hotspot map for surface waters throughout South Carolina. Thirty-eight of 40 locations sampled contained detectable concentrations of organic fluorine (above 100 ng/L). Of the 33 target PFAS analyzed using LC-MS/MS, the most prevalent were perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), and perfluorohexanesulfonate (PFHxS). On average, LC-MS/MS only accounted for 2 % of the TOF measured. Locations with high TOF did not necessarily correlate to high total quantified PFAS concentrations and vice-versa, demonstrating the limitations of target PFAS analysis and indicating that LC-MS may miss highly contaminated sites. Results suggest that future surveys should utilize TOF to more comprehensively capture PFAS in water bodies.
Asunto(s)
Fluorocarburos , Espectrometría de Masas en Tándem , Contaminantes Químicos del Agua , South Carolina , Fluorocarburos/análisis , Contaminantes Químicos del Agua/análisis , Cromatografía Liquida , Monitoreo del Ambiente/métodos , Flúor/análisis , Ácidos Alcanesulfónicos/análisis , Cromatografía Líquida con Espectrometría de Masas , CaprilatosRESUMEN
Per- and polyfluoroalkyl substances (PFAS) are high-profile environmental contaminants, many having long persistence in the environment and widespread presence in humans and wildlife. Following phase-out of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in North America and restrictions in Europe, PFAS replacements are now widely found in the environment. While liquid chromatography (LC)-mass spectrometry (MS) is typically used for measurement, much of the PFAS is missed. To more comprehensively capture organic fluorine, we developed sensitive and robust methods using activated carbon adsorption, solid phase extraction, and combustion ion chromatography (CIC) to measure total organic fluorine (TOF) in industrial wastewaters, river water, and air. Two extraction techniques, adsorbable organic fluorine (AOF) and extractable organic fluorine (EOF), were optimized and compared using 39 different PFAS, including replacements, such as GenX and perfluorobutanesulfonate. Our AOF method achieves 46-112% and 87% recovery for individual PFAS and PFAS mixtures, respectively, with 0.5 µg/L limit of detection (LOD) for a 50 mL sample volume and a 0.3 µg/L LOD for a 500 mL sample volume . Our EOF method achieves 72-99% and 91% recovery for individual PFAS and PFAS mixtures, respectively, with 0.2 µg/L LOD for a 500 mL sample volume and 0.1 µg/L LOD for 1200 mL. In addition to 39 anionic PFAS, two zwitterionic PFAS and two neutral PFAS were evaluated using the optimized TOF methods. Substantially higher TOF values were measured in industrial wastewater, river water, and air samples compared to LC-MS/MS, demonstrating how TOF methods provided a more comprehensive measurement of the total PFAS present, capturing known and unknown organic fluorine.