Carbon Materials Prepared from Invading Pelagic Sargassum for Supercapacitors' Electrodes.

Since 2011, substantial amounts of pelagic Sargassum algae have washed up along the Caribbean beaches and the Gulf of Mexico, leading to negative impacts on the economy and the environment of those areas. Hence, it is now crucial to develop strategies to mitigate this problem while valorizing such invasive biomass. This work deals with the successful exploitation of this pelagic Sargassum seaweed for the fabrication of carbon materials that can be used as electrodes for supercapacitors. Pelagic Sargassum precursors were simply pyrolyzed at temperatures varying from 600 to 900 °C. The resultant carbonaceous materials were then extensively characterized using different techniques, such as nitrogen adsorption for textural characterization, as well as X-ray photoelectron (XPS), Fourier transform infrared spectroscopies (FT-IR) and scanning electron microscopy (SEM), to understand their structures and functionalities. The electrochemical properties of the carbon materials were also tested for their performance as supercapacitors using cyclic voltammetry (CV), the galvanostatic method and electrochemical impedance spectroscopy analyses (EIS). We managed to have a large specific surface, i.e., 1664 m2 g-1 for biochar prepared at 800 °C (CS800). Eventually, CS800 turned out to exhibit the highest capacitance (96 F g-1) over the four samples, along with the highest specific surface (1664 m2 g-1), with specific resistance of about 0.07 Ω g -1.

Adsorption of Hexavalent Chromium Using Activated Carbon Produced from Sargassum ssp.: Comparison between Lab Experiments and Molecular Dynamics Simulations.

Adsorption is one of the most successful physicochemical approaches for removing heavy metal contaminants from polluted water. The use of residual biomass for the production of adsorbents has attracted a lot of attention due to its cheap price and environmentally friendly approach. The transformation of Sargassum-an invasive brown macroalga-into activated carbon (AC) via phosphoric acid thermochemical activation was explored in an effort to increase the value of Sargassum seaweed biomass. Several techniques (nitrogen adsorption, pHPZC, Boehm titration, FTIR and XPS) were used to characterize the physicochemical properties of the activated carbons. The SAC600 3/1 was predominantly microporous and mesoporous (39.6% and 60.4%, respectively) and revealed a high specific surface area (1695 m2·g-1). To serve as a comparison element, a commercial reference activated carbon with a large specific surface area (1900 m2·g-1) was also investigated. The influence of several parameters on the adsorption capacity of AC was studied: solution pH, solution temperature, contact time and Cr(VI) concentration. The best adsorption capacities were found at very acid (pH 2) solution pH and at lower temperatures. The adsorption kinetics of SAC600 3/1 fitted well a pseudo-second-order type 1 model and the adsorption isotherm was better described by a Jovanovic-Freundlich isotherm model. Molecular dynamics (MD) simulations confirmed the experimental results and determined that hydroxyl and carboxylate groups are the most influential functional groups in the adsorption process of chromium anions. MD simulations also showed that the addition of MgCl2 to the activated carbon surface before adsorption experiments, slightly increases the adsorption of HCrO4- and CrO42- anions. Finally, this theoretical study was experimentally validated obtaining an increase of 5.6% in chromium uptake.

Antillean contaminated soils amendment with microwave prepared sargassum biochar: A promising solution to reduce chlordecone transfer to laying hens and piglets?

The use of Sargassum spp., a brown invasive algae, for the production of biochars (BCs) or activated carbons (ACs) and their efficiency to sequestrate chlordecone (CLD) in soil has been recently suggested. The objective of this study was to assess the potential of microwave prepared Sargasso biochar (BCS) amendment in Andosol on the bioavailability of chlordecone in laying hens and piglets, when exposed to this matrix. The efficiency of BCS was compared to a commercial activated carbon, DARCO® (ACD), used as a positive control and to an unamended soil. Samples of CLD-contaminated Andosol were amended with 2% of each carbonaceous matrix and let maturing for 3 months. Thereafter, adequate doses of soil were administered into the laying hens and piglets diets every day during the exposure phase, to simulate involuntary soil ingestion which may happen in practical conditions when animals are reared outside. Finally, bioavailability tests were carried out on target tissue (liver, muscle, adipose tissues and egg yolk). The results showed that the highest reduction of CLD bioavailability was obtained with ACD in both animal species. For laying hens, ACD showed reductions of around 60% (liver: 59%, muscle: 57% and egg yolk: 56%) whereas the BCS showed reduction of around 30% (liver: 31%, muscle: 26% and egg yolk: 30%) compared to the unamended soil. For piglets, only the liver showed interpretable results with reduction of 65% with ACD and 41% with BCS. Overall, BCS is efficient reducing CLD availability but in a lower extend than ACD. This discrepancy may be explained by the variations of physico-chemical characteristics that exist between the two matrices, resulting, from the additional activation phase for DARCO®. Therefore, to improve the efficiency of BCS it would be interesting to move towards DARCO® characteristics by determining out the optimal microwave pyrolysis parameters.