RESUMEN
RATIONALE: We describe the analytical characterization of the designer drug bk-2C-B, a cathinone derivative, contained in a seized tablet, in the absence of an analytical standard. METHODS: The analytical techniques employed include gas chromatography/mass spectrometry (GC/MS), without and with derivatization with 2,2,2-trichloroethyl chloroformate, liquid chromatography/high-resolution-MS (LC/HRMS) with an Orbitrap® analyzer, and nuclear magnetic resonance (NMR). LC/HRMS measurements consisted of accurate mass measurements of MH(+) ionic species under full scan conditions; comparison of experimental and calculated MH(+) isotopic patterns; examination of the isotopic fine structure (IFS) of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak; study of MH(+) collision-induced dissociation (CID) product ions obtained in fragmentation experiments. RESULTS: GC/MS analysis gave highly informative EI mass spectra, particularly after the derivatization of bk-2C-B with 2,2,2-trichloroethyl chloroformate. The application of LC/HRMS, allowing for accurate mass measurements at 100,000 resolving power, greatly enhanced analytical capabilities in structural characterization of this new designer drug. HRMS allowed us to obtain the accurate mass measurements of bk-2C-B MH(+) ionic species, with a mass accuracy of 2.19 ppm; fully superimposable experimental and calculated MH(+) isotopic patterns, with RIA1 and RIA2 values <4%; the IFS of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak completely in accordance with theoretical values. These findings enabled us to obtain the elemental composition formula of the seized drug. Furthermore, characteristic MH(+) CID product ions enabled the characterization of the bk-2C-B molecular structure. The presence of (79)Br and (81)Br isotopes in the substance molecule produced a characteristic isotopic pattern in most MS spectra. Lastly, NMR spectra allowed us to obtain useful information about the position of substituents in the designer drug. CONCLUSIONS: The combination of all the analytical techniques employed allowed the characterization of the seized psychoactive substance, in spite of the lack of a reference standard.
Asunto(s)
Acetofenonas/análisis , Drogas de Diseño/análisis , Cromatografía de Gases y Espectrometría de Masas/métodos , Espectroscopía de Resonancia Magnética/métodos , Espectrometría de Masas/métodos , Bromo/análisis , Cromatografía Liquida/métodos , Isótopos/análisis , Fosgeno/análogos & derivados , Fosgeno/química , Comprimidos/análisisRESUMEN
The analysis of cannabinoids in whole blood is usually done by traditional mass spectrometry (MS) techniques, after offline cleanup or derivatization steps which can be lengthy, laborious, and expensive. We present a simple, fast, highly specific, and sensitive method for the determination of Δ9 -tetrahydrocannabinol (THC), cannabidiol (CBD), cannabinol (CBN), 11-hydroxy-Δ9 -tetrahydrocannabinol (11-OH-THC), and 11-nor-9-carboxy-Δ9 -tetrahydrocannabinol (THC-COOH) in 50 µL whole blood samples. After the addition of deuterated internal standards (IS) and a simple protein precipitation step, an online extraction of sample supernatants using turbulent flow chromatography (TurboFlow-Thermo Scientific) was carried out. Analytes were separated on a C18 analytical column and detected by LC-HRAM-Orbitrap-MS using a Thermo Scientific Q Exactive Focus MS system. MS detection was performed in polarity switching and selected ion monitoring (SIM) modes using five specific acquisition windows, at a resolution of 70,000 (FWHM). Total run time was about 10 min including preanalytical steps. Method validation was carried out by determining limit of detection (LOD), lower limit of quantitation (LLOQ), linearity range, analytical accuracy, intra-assay and interassay precision, carry-over, matrix effect, extraction recovery, and selectivity, for all analytes. Measurement uncertainties were also evaluated, and a decision rule was set with confidence for forensic purposes. The method may become suitable for clinical and forensic toxicology applications, taking advantage of the small matrix volume required, the simple and cost-effective sample preparation procedure, and the fast analytical run time. Performances were monitored over a long-term period and tested on 7620 driving under the influence of drugs (DUID) samples, including 641 positive samples.
Asunto(s)
Cannabinoides , Conducir bajo la Influencia , Cannabinoides/metabolismo , Dronabinol/análisis , Espectrometría de Masas , Cannabinol/análisis , Cromatografía Liquida/métodosRESUMEN
Among the phencyclidine (PCP) and synthetic cathinone analogs present on the street market, 3-methoxyphencyclidine (3-MeO-PCP) is one of the most popular dissociative hallucinogen drugs, while 3-methylmethcathinone (3-MMC) is a commonly encountered psychostimulant. Numerous 3-MeO-PCP- and 3-MMC-related intoxication cases have been reported worldwide. Identification of the positional isomers of MeO-PCP and MMC families are particularly challenging for clinical and forensic laboratories; this is mostly due to their difficult chromatographic separation (particularly when using liquid chromatography-LC) and similar mass spectrometric behaviors. 3-MeO-PCP and 3-MMC were identified in two powders, detained by two subjects and seized by the police, by different analytical techniques, including liquid chromatography-high-resolution accurate-mass Orbitrap mass spectrometry (LC-HRAM-Orbitrap-MS), and solid deposition gas chromatography-Fourier transform infrared spectroscopy (sd-GC-FTIR). LC-HRAM-Orbitrap-MS allowed us to assign the elemental formulae C18H27NO (MeO-PCP) and C11H15NO (MMC) through accurate mass measurement of the two MH+ ions, and the comparison of experimental and calculated MH+ isotopic patterns. However, MH+ collision-induced product ions spectra were not conclusive in discriminating between the positional isomers [(3-MeO-PCP vs. 4-MeO-PCP) and (3-MMC vs. 4-MMC and 2-MMC)]. Likewise, sd-GC-FTIR easily allowed us to differentiate between the MeO-PCP and MMC positional isomers unambiguously, confirming the presence of 3-MeO-PCP and 3-MMC, due to the high-quality match factor of the experimental FTIR spectra against the target FTIR spectra of MeO-PCP and MMC isomers in a dedicated library. 3-MeO-PCP (in contrast to 3-MMC) was also detected in blood and urine samples of both subjects and analyzed in the context of routine forensic casework by LC-HRAM-Orbitrap-MS following a simple deproteinization step. In addition, this untargeted approach allowed us to detect dozens of phase I and phase II 3-MeO-PCP metabolites in all biological specimens. Analysis of the extracted samples by sd-GC-FTIR revealed the presence of 3-MeO-PCP, thus confirming the intake of such specific methoxy-PCP isomer in both cases. These results highlight the effectiveness of LC-HRAM-Orbitrap-MS and sd-GC-FTIR data in attaining full structural characterization of the psychoactive drugs, even in absence of reference standards, in both non-biological and biological specimens.
Asunto(s)
Cromatografía de Gases y Espectrometría de Masas/métodos , Metanfetamina/análogos & derivados , Fosgeno/análogos & derivados , Anfetaminas/química , Anfetaminas/aislamiento & purificación , Drogas Ilícitas/química , Drogas Ilícitas/aislamiento & purificación , Metanfetamina/química , Metanfetamina/aislamiento & purificación , Fosgeno/químicaRESUMEN
Blood alcohol concentration is the most frequent analytical determination carried out in forensic toxicology laboratories worldwide. It is usually required to assess if an offence has been committed by comparing blood alcohol levels with specified legal limits, which can vary widely among countries. Due to possible serious legal consequences associated with non-compliant alcohol levels, measurement uncertainty should be carefully evaluated, along with other metrological aspects which can influence the final result. The whole procedure can be time-consuming and error-generating in routine practice, increasing the risks for unreliable assessments. A software application named Ethanol WorkBook (EtWB) was developed at the author's laboratory by using Visual Basic for Application language and MS Excel(®), with the aim of providing help to forensic analysts involved in blood alcohol determinations. The program can (i) calculate measurement uncertainties and decision limits with different methodologies; (ii) assess compliance to specification limits with a guard-band approach; (iii) manage quality control (QC) data and create control charts for QC samples; (iv) create control maps from real cases data archives; (v) provide laboratory reports with graphical outputs for elaborated data and (vi) create comprehensive searchable case archives. A typical example of drink driving case is presented and discussed to illustrate the importance of a metrological approach for reliable compliance assessment and to demonstrate software application in routine practice. The tool is made freely available to the scientific community at request.
Asunto(s)
Accidentes de Tránsito/legislación & jurisprudencia , Intoxicación Alcohólica/sangre , Nivel de Alcohol en Sangre , Programas Informáticos , Toxicología Forense , Humanos , Límite de Detección , Valor Predictivo de las Pruebas , Reproducibilidad de los Resultados , IncertidumbreRESUMEN
Hair testing is considered to be one of the most efficient tool to investigate drug-related histories, particularly when the period of use needs to be tested back to many days or even months before sampling. High-resolution mass spectrometry represents today one of the most specific and sensitive analytical techniques to detect psychoactive substances in hair samples following single or multiple drug exposures. In this study pubic hair testing, by means of liquid chromatography-high resolution/high accuracy Orbitrap mass spectrometry, was employed to document the potential intake of five new psychoactive substances by a drug dealer. Pubic hair samples were decontaminated and pulverized with a ball mill, and, after the addition of the internal standard 3,4-methylenedioxypropylamphetamine, extracted with methanol:trifluoroacetic acid 9:1 at 45°C for one night. The obtained extracts were analyzed on a Thermo Fisher Scientific Accela 1250 liquid chromatography system coupled to a Thermo Fisher Scientific single-stage Exactive HCD mass spectrometry system. 3-methylmethcathinone (3-MMC) was found to be present at a concentration of 25.8ng/mg in the pubic hair sample, whereas the other four designer drugs were found to be absent. 3-methylephedrines and 3-methylnorephedrines, metabolites of 3-MMC, were identified in the same sample, thereby proving the 3-MMC intake by the drug dealer.
Asunto(s)
Estimulantes del Sistema Nervioso Central/análisis , Cabello/química , Metanfetamina/análogos & derivados , Trastornos Relacionados con Sustancias/diagnóstico , Diagnóstico Diferencial , Toxicología Forense , Cromatografía de Gases y Espectrometría de Masas , Humanos , Masculino , Metanfetamina/análisis , Detección de Abuso de Sustancias/métodosRESUMEN
The measurement of blood-alcohol content (BAC) is a crucial analytical determination required to assess if an offence (e.g. driving under the influence of alcohol) has been committed. For various reasons, results of forensic alcohol analysis are often challenged by the defence. As a consequence, measurement uncertainty becomes a critical topic when assessing compliance with specification limits for forensic purposes. The aims of this study were: (1) to investigate major sources of variability for BAC determinations; (2) to estimate measurement uncertainty for routine BAC determinations; (3) to discuss the role of measurement uncertainty in compliance assessment; (4) to set decision rules for a multiple BAC threshold law, as provided in the Italian Highway Code; (5) to address the topic of the zero-alcohol limit from the forensic toxicology point of view; and (6) to discuss the role of significant figures and rounding errors on measurement uncertainty and compliance assessment. Measurement variability was investigated by the analysis of data collected from real cases and internal quality control. The contribution of both pre-analytical and analytical processes to measurement variability was considered. The resulting expanded measurement uncertainty was 8.0%. Decision rules for the multiple BAC threshold Italian law were set by adopting a guard-banding approach. 0.1 g/L was chosen as cut-off level to assess compliance with the zero-alcohol limit. The role of significant figures and rounding errors in compliance assessment was discussed by providing examples which stressed the importance of these topics for forensic purposes.