Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS2 : The Effect of Edge Termination.

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS2 , it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS2 monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.

Superconductivity enhancement in phase-engineered molybdenum carbide/disulfide vertical heterostructures.

Stacking layers of atomically thin transition-metal carbides and two-dimensional (2D) semiconducting transition-metal dichalcogenides, could lead to nontrivial superconductivity and other unprecedented phenomena yet to be studied. In this work, superconducting α-phase thin molybdenum carbide flakes were first synthesized, and a subsequent sulfurization treatment induced the formation of vertical heterolayer systems consisting of different phases of molybdenum carbide-ranging from α to γ' and γ phases-in conjunction with molybdenum sulfide layers. These transition-metal carbide/disulfide heterostructures exhibited critical superconducting temperatures as high as 6 K, higher than that of the starting single-phased α-Mo2C (4 K). We analyzed possible interface configurations to explain the observed moiré patterns resulting from the vertical heterostacks. Our density-functional theory (DFT) calculations indicate that epitaxial strain and moiré patterns lead to a higher interfacial density of states, which favors superconductivity. Such engineered heterostructures might allow the coupling of superconductivity to the topologically nontrivial surface states featured by transition-metal carbide phases composing these heterostructures potentially leading to unconventional superconductivity. Moreover, we envisage that our approach could also be generalized to other metal carbide and nitride systems that could exhibit high-temperature superconductivity.

Developments of inverse analysis by Kalman filters and Bayesian methods applied to geotechnical engineering.

The present paper reviews recent activities on inverse analysis strategies in geotechnical engineering using Kalman filters, nonlinear Kalman filters, and Markov chain Monte Carlo (MCMC)/Hamiltonian Monte Carlo (HMC) methods. Nonlinear Kalman filters with finite element method (FEM) broaden the choices of unknowns to be determined for not only parameters but also initial and/or boundary conditions, and the use of the posterior probability of the state variables can be widely applied to, for example, the decision making for design changes. The relevance of the unknowns and the observed values and the selection of the best sensor locations are some of the considerations made while using the Kalman filter FEM. This paper demonstrates several real-world geotechnical applications of the nonlinear Kalman filter and the MCMC with FEM. Future studies should focus on the following areas: attaining excellent performance for long-term forecasts using short-term observation and developing a viable method for selecting equations that describe physical phenomena and constitutive models.

Effect of Pretreatment Conditions on the Precise Nanoporosity of Graphene Oxide.

Nanoscale pores in graphene oxide (GO) control various important functions. The nanoporosity of GO is sensitive to low-temperature heating. Therefore, it is important to carefully process GO and GO-based materials to achieve superior functions. Optimum pretreatment conditions, such as the pre-evacuation temperature and time, are important during gas adsorption in GO to obtain accurate pore structure information. This study demonstrated that the pre-evacuation temperature and time for gas adsorption in GO must be approximately 333-353 K and 4 h, respectively, to avoid the irreversible alteration of nanoporosity. In situ temperature-dependent Fourier-transform infrared spectra and thermogravimetric analysis-mass spectrometry suggested significant structural changes in GO above the pre-evacuation temperature (353 K) through the desorption of "physically adsorbed water" and decomposition of unstable surface functional groups. The nanoporosity of GO significantly changed above the aforementioned pre-evacuation temperature and time. Thus, standard pretreatment is indispensable for understanding the intrinsic interface properties of GO.

Nonlinear Dark-Field Imaging of One-Dimensional Defects in Monolayer Dichalcogenides.

One-dimensional defects in two-dimensional (2D) materials can be particularly damaging because they directly impede the transport of charge, spin, or heat and can introduce a metallic character into otherwise semiconducting systems. Current characterization techniques suffer from low throughput and a destructive nature or limitations in their unambiguous sensitivity at the nanoscale. Here we demonstrate that dark-field second harmonic generation (SHG) microscopy can rapidly, efficiently, and nondestructively probe grain boundaries and edges in monolayer dichalcogenides (i.e., MoSe2, MoS2, and WS2). Dark-field SHG efficiently separates the spatial components of the emitted light and exploits interference effects from crystal domains of different orientations to localize grain boundaries and edges as very bright 1D patterns through a Cerenkov-type SHG emission. The frequency dependence of this emission in MoSe2 monolayers is explained in terms of plasmon-enhanced SHG related to the defect's metallic character. This new technique for nanometer-scale imaging of the grain structure, domain orientation and localized 1D plasmons in 2D different semiconductors, thus enables more rapid progress toward both applications and fundamental materials discoveries.

Angstrom-Size Defect Creation and Ionic Transport through Pores in Single-Layer MoS2.

Atomic-defect engineering in thin membranes provides opportunities for ionic and molecular filtration and analysis. While molecular-dynamics (MD) calculations have been used to model conductance through atomic vacancies, corresponding experiments are lacking. We create sub-nanometer vacancies in suspended single-layer molybdenum disulfide (MoS2) via Ga+ ion irradiation, producing membranes containing ∼300 to 1200 pores with average and maximum diameters of ∼0.5 and ∼1 nm, respectively. Vacancies exhibit missing Mo and S atoms, as shown by aberration-corrected scanning transmission electron microscopy (AC-STEM). The longitudinal acoustic band and defect-related photoluminescence were observed in Raman and photoluminescence spectroscopy, respectively. As the irradiation dose is increased, the median vacancy area remains roughly constant, while the number of vacancies (pores) increases. Ionic current versus voltage is nonlinear and conductance is comparable to that of ∼1 nm diameter single MoS2 pores, proving that the smaller pores in the distribution display negligible conductance. Consistently, MD simulations show that pores with diameters <0.6 nm are almost impermeable to ionic flow. Atomic pore structure and geometry, studied by AC-STEM, are critical in the sub-nanometer regime in which the pores are not circular and the diameter is not well-defined. This study lays the foundation for future experiments to probe transport in large distributions of angstrom-size pores.

Ultrasensitive gas detection of large-area boron-doped graphene.

Heteroatom doping is an efficient way to modify the chemical and electronic properties of graphene. In particular, boron doping is expected to induce a p-type (boron)-conducting behavior to pristine (nondoped) graphene, which could lead to diverse applications. However, the experimental progress on atomic scale visualization and sensing properties of large-area boron-doped graphene (BG) sheets is still very scarce. This work describes the controlled growth of centimeter size, high-crystallinity BG sheets. Scanning tunneling microscopy and spectroscopy are used to visualize the atomic structure and the local density of states around boron dopants. It is confirmed that BG behaves as a p-type conductor and a unique croissant-like feature is frequently observed within the BG lattice, which is caused by the presence of boron-carbon trimers embedded within the hexagonal lattice. More interestingly, it is demonstrated for the first time that BG exhibits unique sensing capabilities when detecting toxic gases, such as NO2 and NH3, being able to detect extremely low concentrations (e.g., parts per trillion, parts per billion). This work envisions that other attractive applications could now be explored based on as-synthesized BG.

Intricate Resonant Raman Response in Anisotropic ReS2.

The strong in-plane anisotropy of rhenium disulfide (ReS2) offers an additional physical parameter that can be tuned for advanced applications such as logic circuits, thin-film polarizers, and polarization-sensitive photodetectors. ReS2 also presents advantages for optoelectronics, as it is both a direct-gap semiconductor for few-layer thicknesses (unlike MoS2 or WS2) and stable in air (unlike black phosphorus). Raman spectroscopy is one of the most powerful characterization techniques to nondestructively and sensitively probe the fundamental photophysics of a 2D material. Here, we perform a thorough study of the resonant Raman response of the 18 first-order phonons in ReS2 at various layer thicknesses and crystal orientations. Remarkably, we discover that, as opposed to a general increase in intensity of all of the Raman modes at excitonic transitions, each of the 18 modes behave differently relative to each other as a function of laser excitation, layer thickness, and orientation in a manner that highlights the importance of electron-phonon coupling in ReS2. In addition, we correct an unrecognized error in the calculation of the optical interference enhancement of the Raman signal of transition metal dichalcogenides on SiO2/Si substrates that has propagated through various reports. For ReS2, this correction is critical to properly assessing the resonant Raman behavior. We also implemented a perturbation approach to calculate frequency-dependent Raman intensities based on first-principles and demonstrate that, despite the neglect of excitonic effects, useful trends in the Raman intensities of monolayer and bulk ReS2 at different laser energies can be accurately captured. Finally, the phonon dispersion calculated from first-principles is used to address the possible origins of unexplained peaks observed in the Raman spectra, such as infrared-active modes, defects, and second-order processes.

Low-Temperature Solution Synthesis of Transition Metal Dichalcogenide Alloys with Tunable Optical Properties.

Nanostructures of layered transition metal dichalcogenide (TMD) alloys with tunable compositions are promising candidates for a broad scope of applications in electronics, optoelectronics, topological devices, and catalysis. Most TMD alloy nanostructures are synthesized as films on substrates using gas-phase methods at high temperatures. However, lower temperature solution routes present an attractive alternative with the potential for larger-scale, higher-yield syntheses of freestanding, higher surface area materials. Here, we report the direct solution synthesis of colloidal few-layer TMD alloys, MoxW1-xSe2 and WS2ySe2(1-y), exhibiting fully tunable metal and chalcogen compositions that span the MoSe2-WSe2 and WS2-WSe2 solid solutions, respectively. Chemical guidelines for achieving the targeted compounds are presented, along with comprehensive structural characterizations (X-ray diffraction, electron microscopy, Raman, and UV-visible spectroscopies). High-resolution microscopic imaging confirms the formation of TMD alloys and identifies a random distribution of the alloyed elements. Analysis of the tilt-angle dependency of the intensities associated with atomic-resolution annular dark field imaging line scans reveals the types of point vacancies present in the samples, thus providing atomic-level insights into the structures of colloidal TMD alloy nanostructures that were previously only accessible for substrate-confined films. The A excitonic transition of the TMD alloy nanostructures can be readily adjusted between 1.51 and 1.93 eV through metal and chalcogen alloying, correlating the compositional modulation to the realization of tunable optical properties.

Low-Temperature Solution Synthesis of Few-Layer 1T '-MoTe2 Nanostructures Exhibiting Lattice Compression.

Molybdenum ditelluride, MoTe2 , is emerging as an important transition-metal dichalcogenide (TMD) material because of its favorable properties relative to other TMDs. The 1T ' polymorph of MoTe2 is particularly interesting because it is semimetallic with bands that overlap near the Fermi level, but semiconducting 2H-MoTe2 is more stable and therefore more accessible synthetically. Metastable 1T '-MoTe2 forms directly in solution at 300 °C as uniform colloidal nanostructures that consist of few-layer nanosheets, which appear to exhibit an approx. 1 % lateral lattice compression relative to the bulk analogue. Density functional theory calculations suggest that small grain sizes and polycrystallinity stabilize the 1T ' phase in the MoTe2 nanostructures and suppress its transformation back to the more stable 2H polymorph through grain boundary pinning. Raman spectra of the 1T '-MoTe2 nanostructures exhibit a laser energy dependence, which could be caused by electronic transitions.

Na ion-exchanged zirconium phosphate crystal with high calcium ion selectivity.

We demonstrate hydrothermally grown sodium hydrogen zirconium phosphate ((Na,H)-ZrP) crystals exhibiting high calcium ion selectivity. The standard Gibbs free energies for Ca2+ exchange on (Na,H)-ZrP and γ-type ZrP were estimated to be -10.1 and -4.69 kJ mol-1, respectively. The high Ca2+ selectivity of (Na,H)-ZrP could be attributed to the size matching between the ion exchange site of (Na,H)-ZrP and Ca2+.

Cation-Doped Nanocarbons for Enhanced Perfluoroalkyl Substance Removal: Exotic Bottom-Up Solution Plasma Synthesis and Characterization.

Perfluorinated alkyl substances (PFAS), such as perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), are pervasive organic contaminants that are widespread in aquatic environments, posing significant health risks to humans and wildlife. Due to their persistent nature, urgent removal is necessary. Conventional adsorbents are inefficient at removing PFOS and PFOA, highlighting the need for alternative materials. Herein, we present a synthetic method for quaternary ammonium cation-doped carbon nanoparticles (QACNs) using a solution plasma process for the efficient removal of PFOS and PFOA. QACN is formed simultaneously through a one-step discharge of nonequilibrium plasma at the interface of benzene and pyridinium chloride. The resulting material exhibited a high surface electrical charge and enhanced hydrophilicity as well as an amorphous structure of a nonporous nature, involving nanoparticles with an undefined shape. The obtained adsorbent demonstrated high adsorption efficiency and stability, adsorbing 998.45 and 889.37 mg g-1 of PFOS and PFOA, respectively, exceeding the efficiencies of conventional carbon-based adsorbents (80.89-313.15 mg g-1). The adsorption performance was dependent on the adsorbent dosage, pH of the solution, and the coexisting ionic species. Adsorption studies, including adsorption kinetics, isotherms, and thermodynamics, revealed that PFOS and PFOA were chemisorbed to the QACN surface, forming multilayers endothermically and spontaneously. Experimental and computational analyses revealed that adsorption primarily occurs via electronic interactions between the PFAS active sites and the quaternary ammonium group in the carbon framework. The slightly lower adsorption potential of the PFOS and PFOA fluorocarbon chains on the adsorbent was elucidated. Furthermore, the dispersibility of the adsorbent in solution significantly affected the adsorption performance. These findings highlight the potential of the novel synthetic method proposed in this study, offering a pathway for the development of highly effective carbon adsorbents for environmental remediation.

Giant nanomechanical energy storage capacity in twisted single-walled carbon nanotube ropes.

A sustainable society requires high-energy storage devices characterized by lightness, compactness, a long life and superior safety, surpassing current battery and supercapacitor technologies. Single-walled carbon nanotubes (SWCNTs), which typically exhibit great toughness, have emerged as promising candidates for innovative energy storage solutions. Here we produced SWCNT ropes wrapped in thermoplastic polyurethane elastomers, and demonstrated experimentally that a twisted rope composed of these SWCNTs possesses the remarkable ability to reversibly store nanomechanical energy. Notably, the gravimetric energy density of these twisted ropes reaches up to 2.1 MJ kg-1, exceeding the energy storage capacity of mechanical steel springs by over four orders of magnitude and surpassing advanced lithium-ion batteries by a factor of three. In contrast to chemical and electrochemical energy carriers, the nanomechanical energy stored in a twisted SWCNT rope is safe even in hostile environments. This energy does not deplete over time and is accessible at temperatures ranging from -60 to +100 °C.

Engineering Vacancies for the Creation of Antisite Defects in Chemical Vapor Deposition Grown Monolayer MoS2 and WS2 via Proton Irradiation.

It is critical to understand the laws of quantum mechanics in transformative technologies for computation and quantum information science applications to enable the ongoing second quantum revolution calls. Recently, spin qubits based on point defects have gained great attention, since these qubits can be initiated, selectively controlled, and read out with high precision at ambient temperature. The major challenge in these systems is controllably generating multiqubit systems while properly coupling the defects. To address this issue, we began by tackling the engineering challenges these systems present and understanding the fundamentals of defects. In this regard, we controllably generate defects in MoS2 and WS2 monolayers and tune their physicochemical properties via proton irradiation. We quantitatively discovered that the proton energy could modulate the defects' density and nature; higher defect densities were seen with lower proton irradiation energies. Three distinct defect types were observed: vacancies, antisites, and adatoms. In particular, the creation and manipulation of antisite defects provides an alternative way to create and pattern spin qubits based on point defects. Our results demonstrate that altering the particle irradiation energy can regulate the formation of defects, which can be utilized to modify the properties of 2D materials and create reliable electronic devices.

3d transition metal coordination on monolayer MoS2: a facile doping method to functionalize surfaces.

Two-dimensional materials (2DM) have attracted much interest due to their distinct optical, electronic, and catalytic properties. These properties can be tuned by a range of methods including substitutional doping and, as recently demonstrated, by surface functionalization with single atoms, thus increasing the 2DM portfolio. We theoretically and experimentally describe the coordination reaction between MoS2 monolayers and 3d transition metals (TMs), exploring their nature and MoS2-TM interactions. Density functional theory calculations, X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy point to the formation of MoS2-TM coordination complexes, where the adsorption energy for 3d TMs resembles the crystal-field (CF) stabilization energy for weak-field complexes. Pearson's theory for hard-soft acid-base and ligand-field theory were used to discuss the periodic trends of 3d TM coordination on MoS2 monolayer surfaces. We found that softer acids with higher ligand field stabilization energy, such as Ni2+, tend to form bonds with more covalent character with MoS2, which can be considered a soft base. On the other hand, harder acids, such as Cr3+, tend to form more ionic bonds. Additionally, we studied the trends in charge transfer and doping observed from XPS and PL results, where metals like Ni led to n-type doping. In contrast, Cu functionalization results in p-type doping. Therefore, the formation of coordination complexes on TMD's surface is a potentially effective way to control and understand the nature of single-atom functionalization of TMD monolayers without relying on or creating new defects.

Optically and biologically active mussel protein-coated double-walled carbon nanotubes.

A method of dispersing strongly bundled double-walled carbon nanotubes (DWNTs) via a homogeneous coating of mussel protein in an aqueous solution is presented. Optical activity, mechanical strength, as well as electrical conductivity coming from the nanotubes and the versatile biological activity from the mussel protein make mussel-coated DWNTs promising as a multifunctional scaffold and for anti-fouling materials.

Quantification and Healing of Defects in Atomically Thin Molybdenum Disulfide: Beyond the Controlled Creation of Atomic Defects.

Atomically thin 2D materials provide an opportunity to investigate the atomic-scale details of defects introduced by particle irradiation. Once the atomic configuration of defects and their spatial distribution are revealed, the details of the mesoscopic phenomena can be unveiled. In this work, we created atomically small defects by controlled irradiation of gallium ions with doses ranging from 4.94 × 1012 to 4.00 × 1014 ions/cm2 on monolayer molybdenum disulfide (MoS2) crystals. The optical signatures of defects, such as the evolution of defect-activated LA-bands and a broadening of the first-order (E' and A'1) modes, can be studied by Raman spectroscopy. High-resolution scanning transmission electron microscopy (HR-STEM) analysis revealed that most defects are vacancies of few-molybdenum atoms with surrounding sulfur atoms (VxMo+yS) at a low ion dose. When increasing the ion dose, the atomic vacancies merge and form nanometer-sized holes. Utilizing HR-STEM and image analysis, we propose the estimation of the finite crystal length (Lfc) via the careful quantification of 0D defects in 2D systems through the formula Lfc = 4.41/ηion, where ηion corresponds to the ion dose. Combining HR-STEM and Raman spectroscopy, the formula to calculate Lfc from Raman features, I(LA)/I(A'1) = 5.09/Lfc2, is obtained. We have also demonstrated an effective route to healing the ion irradiation-induced atomic vacancies by annealing defective MoS2 in a hydrogen disulfide (H2S) atmosphere. The H2S annealing improved the crystal quality of MoS2 with Lfc greater than the calculated size of the A exciton wave function, which leads to a partial recovery of the photoluminescence signal after its quenching by ion irradiation.

Single-Step Direct Laser Writing of Multimetal Oxygen Evolution Catalysts from Liquid Precursors.

We investigate a laser direct-write method to synthesize and deposit metastable, mixed transition metal oxides and evaluate their performance as oxygen evolution reaction catalysts. This laser processing method enabled the rapid synthesis of diverse heterogeneous alloy and oxide catalysts directly from cost-effective solution precursors, including catalysts with a high density of nanocrystalline metal alloy inclusions within an amorphous oxide matrix. The nanoscale heterogeneous structures of the synthesized catalysts were consistent with reactive force-field Monte Carlo calculations. By evaluating the impact of varying transition metal oxide composition ratios, we created a stable Fe0.63Co0.19Ni0.18Ox/C catalyst with a Tafel slope of 38.23 mV dec-1 and overpotential of 247 mV, a performance similar to that of IrO2. Synthesized Fe0.63Co0.19Ni0.18Ox/C and Fe0.14Co0.46Ni0.40Ox/C catalysts were experimentally compared in terms of catalytic performance and structural characteristics to determine that higher iron content and a less crystalline structure in the secondary matrix decrease the charge transfer resistance and thus is beneficial for electrocatalytic activity. This conclusion is supported by density-functional theory calculations showing distorted active sites in ternary metal catalysts are key for lowering overpotentials for the oxygen evolution reaction.

Photodegradation Protection in 2D In-Plane Heterostructures Revealed by Hyperspectral Nanoimaging: The Role of Nanointerface 2D Alloys.

Single-layer heterostructures exhibit striking quasiparticle properties and many-body interaction effects that hold promise for a range of applications. However, their properties can be altered by intrinsic and extrinsic defects, thus diminishing their applicability. Therefore, it is of paramount importance to identify defects and understand 2D materials' degradation over time using advanced multimodal imaging techniques. Here we implemented a liquid-phase precursor approach to synthesize 2D in-plane MoS2-WS2 heterostructures exhibiting nanoscale alloyed interfaces and map exotic interface effects during photodegradation using a combination of hyperspectral tip-enhanced photoluminescence and Raman and near-field nanoscopy. Surprisingly, 2D alloyed regions exhibit thermal and photodegradation stability providing protection against oxidation. Coupled with surface and interface strain, 2D alloy regions create stable localized potential wells that concentrate excitonic species via a charge carrier funneling effect. These results demonstrate that 2D alloys can withstand extreme degradation effects over time and could enable stable 2D device engineering.