RAFT Polymerisation by the Radical Decarboxylation of Carboxylic Acids.

The controlled grafting of polymers from small- and macro-molecular substrates is an essential process for many advanced polymer applications. This usually requires the pre-functionalisation of substrates with an appropriate functional group, such as a RAFT agent or ATRP initiator, which requires additional synthetic steps. In this paper, we describe the direct grafting of RAFT polymers from carboxylate containing small molecules and polymers via photochemical radical decarboxylation. This method utilises the innate functional groups present in the substrates, and achieves efficient polymer initiation in a single step with excellent control of molecular weight and dispersity.

Nematic to Cholesteric Transformation in the Cellulose Nanocrystal Droplet Phase.

Nucleation, growth, and transformation of chirality in nanomaterial systems is a growing research topic with broad interest in tunable and configurable chiroptical materials. Similar to other one-dimensional nanomaterials, cellulose nanocrystals (CNCs), which are nanorods of naturally abundant biopolymer cellulose, display chiral or cholesteric liquid crystal (LC) phases in the form of tactoids. However, the nucleation and growth of the cholesteric CNC tactoids to equilibrium chiral structures and their morphological transformations are yet to be critically assessed. We noticed that the onset of liquid crystal formation in CNC suspensions is characterized by the nucleation of a nematic tactoid that grows in volume and spontaneously transforms into a cholesteric tactoid. The cholesteric tactoids merge with the neighboring tactoids to form bulk cholesteric mesophases with various configurational palettes. We applied scaling laws from the energy functional theory and found suitable agreement with the morphological transformation of the tactoid droplets monitored for their fine structure and orientation by quantitative polarized light imaging.

Characterization of freeze-dried oxidized human red blood cells for pre-transfusion testing by synchrotron FTIR microspectroscopy live-cell analysis.

Oxidative treatment of human red blood cells (RBCs) prior to freeze-drying appears to stabilize the RBCs to withstand dried storage at room temperature. To better understand the effects of oxidation and freeze-drying/rehydration on RBC lipids and proteins, single-cell measurements were performed by synchrotron-based Fourier transform infrared (FTIR) microspectroscopy 'live-cell' (unfixed) analysis. Lipid and protein spectral data of tert-butyl hydroperoxide (TBHP)-oxidized RBCs (oxRBCs), FDoxRBCs and control (untreated) RBCs were compared using principal component analysis (PCA) and band integration ratios. The oxRBCs and FDoxRBCs samples had similar spectral profiles that were clearly different to control RBCs. Spectral changes in the CH stretching region of oxRBCs and FDoxRBCs indicated the presence of increased saturated and shorter-chain lipids, consistent with lipid peroxidation and stiffening of the RBC membrane compared to control RBCs. The PCA loadings plot for the fingerprint region of control RBCs corresponding to the α-helical structure of hemoglobin, shows that oxRBCs and FDoxRBCs have conformational changes in the protein secondary structure to ß-pleated sheets and ß-turns. Finally, the freeze-drying process did not appear to compound or induce additional changes. In this context, FDoxRBCs could become a stable source of reagent RBCs for pre-transfusion blood serology testing. The synchrotron FTIR microspectroscopic live-cell protocol provides a powerful analytical tool to characterize and contrast the effects of different treatments on RBC chemical composition at the single cell level.

Thermoresponsive Poly(N-isopropylacrylamide) Grafted from Cellulose Nanofibers via Silver-Promoted Decarboxylative Radical Polymerization.

A family of thermoresponsive poly(N-isopropylacrylamide) [PNIPAM]-grafted cellulose nanofibers (CNFs) was synthesized via a novel silver-promoted decarboxylative polymerization approach. This method relies on the oxidative decarboxylation of carboxylic acid groups to initiate free radicals on the surface of CNFs. The polymerization reaction employs relatively mild reaction conditions and can be performed in a one-step, one-pot fashion. This rapid reaction forms a C─C bond between CNF and PNIPAM, along with the formation of free polymer in solution. The degree of functionalization (DF) and the amount of PNIPAM grafted can be controlled by the Ag concentration in the reaction. Similar to native bulk PNIPAM, PNIPAM-grafted CNFs (PNIPAM-g-CNFs) show remarkable thermoresponsive properties, albeit exhibiting a slight hysteresis between the heating and cooling stages. Grafting PNIPAM from CNFs changes its cloud point from about 32 to 36 °C, influenced by the hydrophilic nature of CNFs. Unlike physical blending, covalently tethering PNIPAM transforms the originally inert CNFs into thermosensitive biomaterials. The Ag concentration used does not significantly change the cloud point of PNIPAM-g-CNFs, while the cloud point slightly decreases with fiber concentration. Rheological studies demonstrated the sol-gel transition of PNIPAM-g-CNFs and revealed that the storage modulus (G') above cloud point increases with the amount of PNIPAM grafted. The novel chemistry developed paves the way for the polymerization of any vinyl monomer from the surface of CNFs and carbohydrates. This study validates a novel approach to graft PNIPAM from CNFs for the synthesis of new thermoresponsive and transparent hydrogels for a wide range of applications.

Laser incubation for the rapid detection of red cell alloantibodies in human blood samples.

BACKGROUND AND OBJECTIVES: Pre-transfusion antibody screening requires the detection and identification of immunoglobulin G (IgG) antibodies against red blood cells (RBCs). Using the indirect antiglobulin test (IAT), plasma-RBC solutions are incubated at 37°C in gel cards, typically by heating block technology. Here, we apply the newly developed laser incubation method to detect RBC alloantibodies in the plasma from human donors. MATERIALS AND METHODS: Donated human plasma samples (N = 128) containing clinically significant IgG antibodies directed against Rh (D, C, c, Cw and E), Kell (K and Kpa ), Duffy (Fya and Fyb ), Kidd (Jka ) and MNS (S) blood group system antigens were tested by the indirect antiglobulin test (IAT). Samples were heated to 37°C by infrared laser (980 nm) for incubations of up to 5 min. Samples were also incubated in a heating block for comparison. RESULTS: When heating by laser, the presence of an alloantibody is detected after only a 1-min incubation for 96% of samples. No samples required longer than 3 min of laser incubation in order to detect the antibody. For all samples, incubation by laser gave the same or stronger result within 5 min. No samples required longer than 5 min to achieve an equivalent result to that of the 5-min heating block incubation. The laser was not found to damage cells or antibodies. CONCLUSION: Laser incubation provides comparable results in shorter time frames than the heating block. Laser incubation can rapidly detect even very weak antibodies.

Cationic Cross-Linked Nanocellulose-Based Matrices for the Growth and Recovery of Intestinal Organoids.

Highly carboxylated nanocellulose fibers can be functionalized with cell adhesive peptides and cationic cross-linked to form matrices for a three-dimensional (3D) cell culture. It is hypothesized that nanocellulose hydrogels cross-linked with divalent cations can provide the required biochemical and mechanical properties for intestinal organoid growth and recovery. Nanocellulose hydrogels are produced by TEMPO- and TEMPO-periodate-mediated oxidation and functionalized with RGD peptides. Mechanical properties are measured by rheology and optical properties quantified by UV-vis spectroscopy. Cellulosic matrices are cross-linked with Ca2+ and Mg2+ and intestinal organoids cultured for 4 days. The organoids are recovered for passaging and RNA extraction. TEMPO-periodate-oxidized nanocellulose fibers form functionalized hydrogels and support the growth of intestinal organoids. The highly transparent cellulosic matrix requires 4 times more Mg2+ than Ca2+ ions to reach the targeted stiffness. Organoids cultured in nanocellulose maintained a major living area for up to 4 days. Cell clusters recovered from magnesium-cross-linked hydrogels can be passaged, and their extracted RNA is intact. Cationic cross-linked nanocellulose hydrogels are promising alternative plant-based matrices for a 3D cell culture systems.

Blending Ferulic Acid Derivatives and Polylactic Acid into Biobased and Transparent Elastomeric Materials with Shape Memory Properties.

Thanks to its remarkable properties such as sustainability, compostability, biocompatibility, and transparency, poly-l-lactic acid (PLA) would be a suitable replacement for oil-based polymers should it not suffer from low flexibility and poor toughness, restricting its use to rigid plastic by excluding elastomeric applications. Indeed, there are few fully biobased and biodegradable transparent elastomers-PLA-based or not-currently available. In the last decades, many strategies have been investigated to soften PLA and enhance its toughness and elongation at break by using plasticizers, oligomers, or polymers. This work shows how a ferulic acid-derived biobased additive (BDF) blends with a common rigid and brittle commercial grade of polylactic acid to provide a transparent non-covalently cross-linked elastomeric material with shape memory behavior exhibiting an elongation at break of 434% (vs 6% for pristine PLA). Through a structure-activity relationship analysis conducted with BDF analogues and a modeling study, we propose a mechanism based on π-π stacking to account for the elastomeric properties. Blending ferulic acid derivatives with polylactic acid generates a new family of fully sustainable transparent elastomeric materials with functional properties such as shape memory.

A rapid paper-based blood typing method from droplet wicking.

Paper-based diagnostics are leading the field of low-cost, point of care analytical techniques. However, large scale testing facilities such as hospitals are still primarily using the gel column agglutination technique. This is because paper-based systems are single use tests that are generally more time consuming and less automatable than traditional methods. Here, we present a novel, rapid and scalable, paper-based blood typing method that can produce test results in under ten seconds. We believe this is the fastest blood typing test that is appropriate for large scale automation. The test consists of placing a drop of antibody solution on paper, followed by a drop of blood on the same locus, and measuring the evolution of blood stain area as a function of time. Positive reactions for both forward and reverse tests have significantly slower growth rates and smaller final stain sizes when compared to negatives. We analyse the effect paper type, red blood cell concentration, antibody specificity (A, B and D) and antibody dilution have on the sensitivity and reproducibility of the technique. A high sensitivity is found in papers with a low density and thickness. The optimum red blood cell concentration is determined from a balance between wicking rate, strength of reaction and optical contrast. A and B antibodies give more sensitive results than D; however, the D antigen can still be successfully identified. This technique has the potential to significantly cut down the time and cost of blood typing tests and enable design of a new high throughput and fully automatable system.

Droplet-based blood group antibody screening with laser incubation.

Detection of blood group antibodies is a crucial step for blood transfusion recipients and pregnant women to prevent potentially fatal haemolytic reactions. Due to the short, non-bridging structure of such antibodies (IgG), the indirect antiglobulin test (IAT) is required, complete with a thermal incubation phase. This incubation step, where the sample must be heated to 37 °C for several minutes, has hitherto prevented chip- and paper-diagnostics from performing a complete IAT and instead required the IAT to be performed away from the patient beside in a laboratory setting with specialist equipment - significantly delaying blood transfusions. With recent laser technology for immunohaematology, a single blood droplet can be heated. This study presents a simple diagnostic where a single 15 µL droplet sits on hydrophobic PTFE film and is heated by laser. The result of the test is then determined via placement of a paper strip where passive wicking and filtration of the sample separates positive from negative results. We demonstrate that this diagnostic can accurately and sensitively detect blood group antibodies, with results quickly read by eye without further specialist equipment or training, with potential to lead to a point-of-care antibody screen.

Wash-free paper diagnostics for the rapid detection of blood type antibodies.

Identification of specific antibodies in patient plasma is an essential part of many diagnostic procedures and is critical for safe blood transfusion. Current techniques require laboratory infrastructure and long turnaround times which limits access to those nearby tertiary healthcare providers. Addressing this challenge, a novel and rapid paper-based antibody test is reported. We validate antibody detection with reverse blood typing using IgM antibodies and then generalise the validity by adapting to detect SARS CoV-2 (COVID-19) antibodies in patient serum samples. Reagent red blood cells (RBC) are first combined with the patient plasma containing the screened antibody and a droplet of the mixture is then deposited onto paper. The light intensity profile is analyzed to identify test results, which can be detected by eye and/or with image processing to allow full automation. The efficacy of this test to perform reverse blood typing is demonstrated and the performance and sensitivity of this test using different paper types and RBC reagents was investigated using clinical samples. As an example of the flexibility of this approach, we labeled the RBC reagent with an antibody-peptide conjugate to detect SARS CoV-2 (COVID-19) antibodies in patient serum samples. This concept could be generalized to any agglutination-based antibody diagnostics with blood plasma.

Pattern formation in drying blood drops.

Patterns in dried droplets are commonly observed as rings left after spills of dirty water or coffee have evaporated. Patterns are also seen in dried blood droplets and the patterns have been shown to differ from patients afflicted with different medical conditions. This has been proposed as the basis for a new generation of low-cost blood diagnostics. Before these diagnostics can be widely used, the underlying mechanisms leading to pattern formation in these systems must be understood. We analyse the height profile and appearance of dispersions prepared with red blood cells (RBCs) from healthy donors. The red cell concentrations and diluent were varied and compared with simple polystyrene particle systems to identify the dominant mechanistic variables. Typically, a high concentration of non-volatile components suppresses ring formation. However, RBC suspensions display a greater volume of edge deposition when the red cell concentration is higher. This discrepancy is caused by the consolidation front halting during drying for most blood suspensions. This prevents the standard horizontal drying mechanism and leads to two clearly defined regions in final crack patterns and height profile. This article is part of a discussion meeting issue 'A cracking approach to inventing new tough materials: fracture stranger than friction'.

Engineering laminated paper for SARS-CoV-2 medical gowns.

The COVID-19 pandemic has highlighted the need for diversity in the market and alternative materials for personal protective equipment (PPE). Paper has high coatability for tunable barrier performance, and an agile production process, making it a potential substitute for polyolefin-derived PPE materials. Bleached and newsprint papers were laminated with polyethylene (PE) coatings of different thicknesses, and characterised for their potential use as medical gowns for healthcare workers and COVID-19 patients. Thicker PE lamination improved coating homogeneity and water vapour resistance. 49 GSM bleached paper with 16 GSM PE coating showed high tensile and seam strength, and low water vapour transmission rate (WVTR). Phi-X174 bacteriophage testing revealed that paper laminated with 15 GSM coating hinders virus penetration. This research demonstrates that PE laminated paper is a promising material for low cost viral protective gowns.

Radial Wicking of Biological Fluids in Paper.

In this study, we analyze stain growth kinetics from droplets of biological fluids such as blood, plasma, and protein solutions on paper both experimentally and numerically. The primary difference of biological fluids from a simple fluid is a significant wetting/dewetting hysteresis in paper. This becomes important in later stages of droplet wicking, after the droplet has been completely absorbed into paper. This is shown by anomalous power dependence of area with time in the later stages of radial wicking. At early stages, current numerical wicking models can predict stain growth of biological fluids. However, at later stages, the introduction of hysteresis complicates modeling significantly. We show that the cause of the observed hysteresis is due to contact angle effects and that this is the dominant mechanism that leads to the anomalous stain growth kinetics measured uniquely in biological fluids. Results presented will streamline the design process of paper-based diagnostics, allowing a modeling approach instead of a trial and error method.

Enhancing Printing Resolution on Hydrophobic Polymer Surfaces Using Patterned Coatings of Cellulose Nanocrystals.

High-resolution inkjet printing of a hydrophobic polymer surface (polystyrene, PS) was accomplished using a patterned coating of cellulose nanocrystals (CNCs) that prevents the ink from bleeding. A periodically crack-free, wrinkled (wavelength of around 850 nm) stamp was prepared by surface oxidation of an uniaxially stretched poly(dimethylsiloxane) elastomeric substrate and was used as a template to transfer aligned patterns of cellulose nanocrystals (CNCs) onto PS surfaces by wet stamping. The morphology of the aligned CNC coatings on PS was then compared with randomly deposited CNCs on PS using atomic force microscopy. The wettability of the CNCs and polymer surfaces with water and ink was measured and analyzed in the context of inkjet printing. This biomaterial coating technique enables high-resolution printing of modern water-based inks onto hydrophobic surfaces for applications in renewable packaging and printing of biomolecules for high throughput diagnostics. Further, with suitable modifications, the technology is scalable to roll-to-roll manufacturing for industrial flexo printing.

Rapid paper diagnostic for plasma fibrinogen concentration.

Fibrinogen is a blood protein that is essential for clotting. It is converted into the polymer fibrin by the blood enzymes thrombin and factor XIIIa. Fibrinogen is one of the first proteins to be depleted in heavily bleeding patients. Patients with early hypofibrinogenemia need urgent fibrinogen replenishment to prevent the onset of haemorrhage and death. However, currently there is no rapid, sensitive, cheap and easy-to-use fibrinogen assay that can detect fibrinogen concentrations. In this study, we have developed a new paper-based diagnostic to quantify the fibrinogen concentration in blood at room temperature. This diagnostic is a 2-step process: first, plasma is added onto thrombin-treated paper strips where fibrinogen is converted to fibrin; then the strips are placed into an aqueous dye bath where elution occurs. The test operates by measuring the change in hydrophobicity, which increases with fibrinogen concentration under otherwise constant conditions. The diagnostic can precisely measure fibrinogen concentration within the range of 0-2 g L-1, which is ideal for the clinical diagnosis of hypofibrinogenemia. Furthermore, testing needs only 12 µL of plasma, 60 mU of thrombin and 7.5 minutes of testing. This diagnostic has the potential to revolutionise point of care testing and save many lives.

Synthesis of Lignin-based Phenol Terminated Hyperbranched Polymer.

In this work, we proved the efficient synthesis of a bio-based hyper-branched polyphenol from a modified lignin degradation fragment. Protocatechuic acid was readily obtained from vanillin, a lignin degradation product, via alkaline conditions, and further polymerised to yield high molecular weight hyperbranched phenol terminated polyesters. Vanillic acid was also subjected to similar polymerisation conditions in order to compare polymerisation kinetics and differences between linear and hyperbranched polymers. Overall, protocatechuic acid was faster to polymerise and more thermostable with a degradation temperature well above linear vanillic acid polyester. Both polymers exhibited important radical scavenging activity (RSA) compared to commercial antioxidant and present tremendous potential for antioxidant applications.

Visualization and Quantification of IgG Antibody Adsorbed at the Cellulose-Liquid Interface.

Quantification of adsorbed biomolecules (enzymes, proteins) at the cellulose interface is a major challenge in developing eco-friendly biodiagnostics. Here, a novel methodology is developed to visualize and quantify the adsorption of antibody from solution to the cellulose-liquid interface. The concept is to deuterate cellulose by replacing all nonexchangeable hydrogens from the glucose rings with deuterium in order to enhance the scattering contrast between the cellulose film surface and adsorbed antibody molecules. Deuterated cellulose (DC) was obtained from bacterial (Gluconacetobacter xylinus strain) cellulose, which was grown in heavy water (D2O) media with a deuterated glycerol as a carbon source. For comparison, hydrogenated cellulose (HC) was obtained from cellulose acetate. Both HC and DC thin films were prepared on silicon substrate by spin coating. X-ray reflectivity (XR) shows the formation of homogeneous and smooth film. Neutron reflectivity (NR) at the liquid/film interface reveals swelling of the cellulose film by a factor of 2-3× its initial thickness. An Immunoglobulin G (IgG), used as a model antibody, was adsorbed at the liquid-solid interface of cellulose (HC) and deuterated cellulose (DC) films under equilibrium and surface saturation conditions. NR measurements of the IgG antibody layer adsorbed onto the DC film can clearly be visualized, in sharp contrast in comparison to the HC film. The average thickness of the IgG adsorbed layer onto cellulose films is 127 ± 5 Å and a partial monolayer is formed. Visualization and quantification of adsorbed IgG is shown by large difference in scattering length density (SLD) between DC (7.1 × 10-6 Å-2) and IgG (4.1 × 10-6 Å-2) in D2O, which enhanced the scattering contrast in NR. Quartz crystal measurements (QCM-D) were used as a complementary method to NR to quantify the adsorbed IgG over the cellulose interface.

Duffy blood group (Fya & Fyb) analysis using surface plasmon resonance.

The most widely known blood groups, ABO and RhD, have been extensively observed as having strong antibody-antigen interactions during blood typing. However, not all interactions show the same binding affinity. The Duffy blood group system, where Fya and Fyb antigens are the most clinically significant, are only available with an IgG antibody structure, and display weak binding interactions. While current blood typing techniques are well established, methods for quantifying the binding strength are more limited. Surface Plasmon Resonance (SPR) provides avenues for developing more robust detection methods, and serve as a sensitive quantification technique by itself. This study tested SPR for the detection of weaker antibody-antigen interactions using the Duffy blood groups, Fya and Fyb, as a model. This study shows a minimum threshold of antibody concentration is required for successful detection. Some instances of detection were successful using concentrated commercial anti-Fya and anti-Fyb solution during the incubation stage. However, these results were not fully reproducible. We found that a significant dissociation of the Duffy antigen-antibody complex occurs over time. A combination of factors affects the detection of the Duffy antigens using SPR; these include antibody concentration, antigen expression, and antigen structure. This results in weak, unstable and reversible antibody-antigen interactions which are currently limiting accurate and reproducible detection by SPR. Despite these issues, detection of Duffy antigens Fya and Fyb was demonstrated using SPR; however, further development is required for SPR to become a robust clinical blood typing technique.

Paper-based assay for red blood cell antigen typing by the indirect antiglobulin test.

A rapid and simple paper-based elution assay for red blood cell antigen typing by the indirect antiglobulin test (IAT) was established. This allows to type blood using IgG antibodies for the important blood groups in which IgM antibodies do not exist. Red blood cells incubated with IgG anti-D were washed with saline and spotted onto the paper assay pre-treated with anti-IgG. The blood spot was eluted with an elution buffer solution in a chromatography tank. Positive samples were identified by the agglutinated and fixed red blood cells on the original spotting area, while red blood cells from negative samples completely eluted away from the spot of origin. Optimum concentrations for both anti-IgG and anti-D were identified to eliminate the washing step after the incubation phase. Based on the no-washing procedure, the critical variables were investigated to establish the optimal conditions for the paper-based assay. Two hundred ten donor blood samples were tested in optimal conditions for the paper test with anti-D and anti-Kell. Positive and negative samples were clearly distinguished. This assay opens up new applications of the IAT on paper including antibody detection and blood donor-recipient crossmatching and extends its uses into non-blood typing applications with IgG antibody-based diagnostics. Graphical abstract A rapid and simple paper-based assay for red blood cell antigen typing by the indirect antiglobulin test.

Nano- and Microstructures of Collagen-Nanocellulose Hydrogels as Engineered Extracellular Matrices.

The extracellular matrix (ECM) is the fundamental acellular element of human tissues, providing their mechanical structure while delivering biomechanical and biochemical signals to cells. Three-dimensional (3D) tissue models commonly use hydrogels to recreate the ECM in vitro and support the growth of cells as organoids and spheroids. Collagen-nanocellulose (COL-NC) hydrogels rely on the blending of both polymers to design matrices with tailorable physical properties. Despite the promising application of these biomaterials in 3D tissue models, the architecture and network organization of COL-NC remain unclear. Here, we investigate the structural effects of incorporating NC fibers into COL hydrogels by small-angle neutron scattering (SANS) and ultra-SANS (USANS). The critical hierarchical structure parameters of fiber dimensions, interfiber distance, and coassembled open structures of NC and COL in the absence and presence of cells were determined. We found that NC expanded and increased the homogeneity in the COL network without affecting the inherent fiber properties of both polymers. Cells cultured as spheroids in COL-NC remodeled the hydrogel network without a significant impact on its architecture. Our study reveals the polymer organization of COL-NC hydrogels and demonstrates SANS and USANS as exceptional techniques to reveal nano- and micron-scale details on polymer organization, which leads to a better understanding of the structural properties of hydrogels to engineer novel ECMs.