RESUMEN
Manual phenotyping of rice tillers is time consuming and labor intensive, and lags behind the rapid development of rice functional genomics. Thus, automated, non-destructive methods of phenotyping rice tiller traits at a high spatial resolution and high throughput for large-scale assessment of rice accessions are urgently needed. In this study, we developed a high-throughput micro-CT-RGB imaging system to non-destructively extract 739 traits from 234 rice accessions at nine time points. We could explain 30% of the grain yield variance from two tiller traits assessed in the early growth stages. A total of 402 significantly associated loci were identified by genome-wide association study, and dynamic and static genetic components were found across the nine time points. A major locus associated with tiller angle was detected at time point 9, which contained a major gene, TAC1. Significant variants associated with tiller angle were enriched in the 3'-untranslated region of TAC1. Three haplotypes for the gene were found, and rice accessions containing haplotype H3 displayed much smaller tiller angles. Further, we found two loci containing associations with both vigor-related traits identified by high-throughput micro-CT-RGB imaging and yield. The superior alleles would be beneficial for breeding for high yield and dense planting.
Asunto(s)
Oryza/crecimiento & desarrollo , Oryza/genética , Biomasa , Sequías , Grano Comestible/crecimiento & desarrollo , Genoma de Planta , Estudio de Asociación del Genoma Completo , Microtomografía por Rayos XRESUMEN
Energy crops can provide a sustainable source of power and fuels, and mitigate the negative effects of CO2 emissions associated with fossil fuel use. Miscanthus is a perennial C4 energy crop capable of producing large biomass yields whilst requiring low levels of input. Miscanthus is largely unimproved and therefore there could be significant opportunities to increase yield. Further increases in yield will improve the economics, energy balance, and carbon mitigation of the crop, as well as reducing land-take. One strategy to increase yield in Miscanthus is to maximize the light captured through an extension of canopy duration. In this study, canopy duration was compared among a diverse collection of 244 Miscanthus genotypes. Canopy duration was determined by calculating the number of days between canopy establishment and senescence. Yield was positively correlated with canopy duration. Earlier establishment and later senescence were also both separately correlated with higher yield. However, although genotypes with short canopy durations were low yielding, not all genotypes with long canopy durations were high yielding. Differences of yield between genotypes with long canopy durations were associated with variation in stem and leaf traits. Different methodologies to assess canopy duration traits were investigated, including visual assessment, image analysis, light interception, and different trait thresholds. The highest correlation coefficients were associated with later assessments of traits and the use of quantum sensors for canopy establishment. A model for trait optimization to enable yield improvement in Miscanthus and other bioenergy crops is discussed.
Asunto(s)
Biocombustibles , Poaceae/crecimiento & desarrollo , Agricultura , Biomasa , Genotipo , Fenotipo , Poaceae/genética , Análisis de Componente Principal , Carácter Cuantitativo Heredable , Factores de TiempoRESUMEN
Preventing disease in cereal crops is important for maintaining productivity and as the availability and efficacy of chemical control becomes reduced the emphasis on breeding for disease resistance increases. However, there is evidence that disease resistance may be physiologically costly to the plant and we ask if understanding stomatal responses to fungal attack is the key to minimising reductions in growth associated with disease resistance.
Asunto(s)
Productos Agrícolas/fisiología , Resistencia a la Enfermedad/fisiología , Grano Comestible/fisiología , Hongos , Enfermedades de las Plantas/microbiología , Estomas de Plantas/fisiología , Productos Agrícolas/microbiología , Grano Comestible/microbiología , Estrés FisiológicoRESUMEN
Lodging is a common problem in rice, reducing its yield and mechanical harvesting efficiency. Rice architecture is a key aspect of its domestication and a major factor that limits its high productivity. The ideal rice culm structure, including major_axis_culm, minor axis_culm, and wall thickness_culm, is critical for improving lodging resistance. However, the traditional method of measuring rice culms is destructive, time consuming, and labor intensive. In this study, we used a high-throughput micro-CT-RGB imaging system and deep learning (SegNet) to develop a high-throughput micro-CT image analysis pipeline that can extract 24 rice culm morphological traits and lodging resistance-related traits. When manual and automatic measurements were compared at the mature stage, the mean absolute percentage errors for major_axis_culm, minor_axis_culm, and wall_thickness_culm in 104 indica rice accessions were 6.03%, 5.60%, and 9.85%, respectively, and the R2 values were 0.799, 0.818, and 0.623. We also built models of bending stress using culm traits at the mature and tillering stages, and the R2 values were 0.722 and 0.544, respectively. The modeling results indicated that this method can quantify lodging resistance nondestructively, even at an early growth stage. In addition, we also evaluated the relationships of bending stress to shoot dry weight, culm density, and drought-related traits and found that plants with greater resistance to bending stress had slightly higher biomass, culm density, and culm area but poorer drought resistance. In conclusion, we developed a deep learning-integrated micro-CT image analysis pipeline to accurately quantify the phenotypic traits of rice culms in â¼4.6 min per plant; this pipeline will assist in future high-throughput screening of large rice populations for lodging resistance.
Asunto(s)
Aprendizaje Profundo , Resistencia a la Enfermedad/genética , Oryza/genética , Fitomejoramiento/métodos , Enfermedades de las Plantas/genética , Microtomografía por Rayos X/instrumentación , FenotipoRESUMEN
Hypersensitive response (HR) against Blumeria graminis f. sp. hordei infection in barley (Hordeum vulgare) was associated with stomata "lock-up" leading to increased leaf water conductance (g(l)). Unique spatio-temporal patterns of HR formation occurred in barley with Mla1, Mla3, or MlLa R genes challenged with B. graminis f. sp. hordei. With Mla1, a rapid HR, limited to epidermal cells, arrested fungal growth before colonies initiated secondary attacks. With Mla3, mesophyll HR preceded that in epidermal cells whose initial survival supported secondary infections. With MlLa, mesophyll survived and not all attacked epidermal cells died immediately, allowing colony growth and secondary infection until arrested. Isolines with Mla1, Mla3, or MlLa genes inoculated with B. graminis f. sp. hordei ranging from 1 to 100 conidia mm(2) showed abnormally high g(l) during dark periods whose timing and extent correlated with those of each HR. Each isoline showed increased dark g(l) with the nonpathogen B. graminis f. sp. avenae which caused a single epidermal cell HR. Guard cell autofluorescence was seen only after drying of epidermal strips and closure of stomata suggesting that locked open stomata were viable. The data link stomatal lock-up to HR associated cell death and has implications for strategies for selecting disease resistant genotypes.
Asunto(s)
Ascomicetos/fisiología , Muerte Celular/fisiología , Hordeum/microbiología , Hordeum/fisiología , Hojas de la Planta/fisiología , Ascomicetos/crecimiento & desarrollo , Ascomicetos/ultraestructura , Regulación de la Expresión Génica de las Plantas , Hordeum/ultraestructura , Microscopía Electrónica de Rastreo , Enfermedades de las Plantas/microbiología , Hojas de la Planta/microbiología , Hojas de la Planta/ultraestructura , Agua/metabolismoRESUMEN
Computer-vision based measurements of phenotypic variation have implications for crop improvement and food security because they are intrinsically objective. It should be possible therefore to use such approaches to select robust genotypes. However, plants are morphologically complex and identification of meaningful traits from automatically acquired image data is not straightforward. Bespoke algorithms can be designed to capture and/or quantitate specific features but this approach is inflexible and is not generally applicable to a wide range of traits. In this paper, we have used industry-standard computer vision techniques to extract a wide range of features from images of genetically diverse Arabidopsis rosettes growing under non-stimulated conditions, and then used statistical analysis to identify those features that provide good discrimination between ecotypes. This analysis indicates that almost all the observed shape variation can be described by 5 principal components. We describe an easily implemented pipeline including image segmentation, feature extraction and statistical analysis. This pipeline provides a cost-effective and inherently scalable method to parameterise and analyse variation in rosette shape. The acquisition of images does not require any specialised equipment and the computer routines for image processing and data analysis have been implemented using open source software. Source code for data analysis is written using the R package. The equations to calculate image descriptors have been also provided.
Asunto(s)
Arabidopsis/genética , Minería de Datos , Ecotipo , Programas Informáticos , Algoritmos , Arabidopsis/crecimiento & desarrollo , Procesamiento de Imagen Asistido por Computador , Hojas de la Planta/genéticaRESUMEN
Stomata regulate gas exchange and their closure in response to pathogens may, in some cases, contribute to resistance. However, in the cereal mildew and rust systems, stomatal closure follows establishment of compatible infections. In incompatible systems, expression of major (R) gene controlled hypersensitive responses (HR), causes drastic, permanent stomatal dysfunction: stomata become locked open following powdery mildew attack and locked shut following rust attack. Thus, stomatal locking can be a hitherto unsuspected negative consequence of R gene resistance that carries a physiological cost affecting plant performance.
RESUMEN
A maize (Zea mays) senescence-associated legumain gene, See2beta, was characterized at the physiological and molecular levels to determine its role in senescence and resource allocation. A reverse-genetics screen of a maize Mutator (Mu) population identified a Mu insertion in See2beta. Maize plants homozygous for the insertion were produced. These See2 mutant and sibling wild-type plants were grown under high or low quantities of nitrogen (N). The early development of both genotypes was similar; however, tassel tip and collar emergence occurred earlier in the mutant. Senescence of the mutant leaves followed a similar pattern to that of wild-type leaves, but at later sampling points mutant plants contained more chlorophyll than wild-type plants and showed a small extension in photosynthetic activity. Total plant weight was higher in the wild-type than in the mutant, and there was a genotype x N interaction. Mutant plants under low N maintained cob weight, in contrast to wild-type plants under the same treatment. It is concluded, on the basis of transposon mutagenesis, that See2beta has an important role in N-use and resource allocation under N-limited conditions, and a minor but significant function in the later stages of senescence.
Asunto(s)
Elementos Transponibles de ADN/genética , Mutagénesis Insercional , Nitrógeno/metabolismo , Péptido Hidrolasas/genética , Hojas de la Planta/fisiología , Zea mays/genética , Zea mays/fisiología , Emparejamiento Base , Carotenoides/metabolismo , Clorofila/metabolismo , Mapeo Cromosómico , ADN de Plantas/metabolismo , Exones/genética , Regulación de la Expresión Génica de las Plantas , Genoma de Planta , Intrones/genética , Péptido Hidrolasas/metabolismo , Fotosíntesis , Hojas de la Planta/genética , ARN Mensajero/genética , ARN Mensajero/metabolismo , Reproducción , Análisis de Secuencia de ADN , Homología de Secuencia , Factores de Tiempo , Zea mays/enzimologíaRESUMEN
Blumeria graminis f.sp. hordei (Bgh) attack disrupted stomatal behaviour, and hence leaf water conductance (g(l)), in barley genotypes Pallas and Risø-S (susceptible), P01 (with Mla1 conditioning a hypersensitive response; HR), and P22 and Risø-R (with mlo5 conditioning papilla-based penetration resistance). Inoculation caused some stomatal closure well before the fungus attempted infection. Coinciding with epidermal cell penetration, stomatal opening in light was also impeded, although stomata of susceptible and mlo5 lines remained largely able to close in darkness. Following infection, in susceptible lines stomata closed in darkness but opening in light was persistently impeded. In Risø-R, stomata recovered nearly complete function by approximately 30 h after inoculation, i.e. after penetration resistance was accomplished. In P01, stomata became locked open and unable to close in darkness shortly after epidermal cells died due to HR. In the P22 background, mlo5 penetration resistance was often followed by consequential death of attacked cells, and here too stomata became locked open, but not until approximately 24 h after pathogen attack had ceased. The influence of epidermal cell death was localized, and only affected stomata within one or two cells distance. These stomata were unable to close not only in darkness but also after application of abscisic acid and in wilted leaves suffering drought. Thus, resistance to Bgh based on HR or associated with cell death may have previously unsuspected negative consequences for the physiological health of apparently 'disease-free' plants. The results are discussed in relation to the control of stomatal aperture in barley by epidermal cells.