Synthesis of Submicrometric Chitosan Particles Loaded with Calcium Phosphate for Biomedical Applications.

Chitosan particles loaded with dibasic calcium phosphate anhydrous (DCPA) is a promising strategy for combining antimicrobial and osteoconduction properties in regenerative medicine. However, mostly micrometer-sized particles have been reported in the literature, limiting their use and reducing their effect in the biomedical field. We have recently overcome this limitation by developing submicrometer-sized particles with electrospray technique. The objective of this study was to understand how the process parameters control the size and properties of submicrometer chitosan particles loaded with DCPA. Solutions of 10 mg/mL chitosan and 2.5 mg/mL DCPA in a 90% acetic acid were electrosprayed under three distinct flow rate conditions: 0.2, 0.5, and 1.0 mL/h. The particles were crosslinked in a glutaraldehyde atmosphere and characterized in terms of their morphology, inorganic content, zeta potential, and minimum inhibitory concentration (MIC) against S. mutans. All conditions showed particles with two similar morphologies: one small-sized with a spherical shape and another larger-sized with a bi-concave shape. All generated a broad particle size distribution, with a similar mean size of ~ 235 nm. The addition of DCPA decreased the zeta potential for all the samples, but it was above 30 mV, indicating a low aggregation potential. The lower flow rate showed the worst efficacy for DCPA incorporation. Antimicrobial activity was greater in chitosan/DCPA particles with flow rate of 0.5 mL/h. It can be concluded that the flow rate of 0.5 mL/h presents the best compromise solution in terms of morphology, zeta potential, MIC, and inorganic content.

HLA-DRB1 and cytokine polymorphisms in Brazilian patients with myelodysplastic syndromes and its association with red blood cell alloimmunization.

OBJECTIVE(S): This study aimed investigate association of HLA-DRB1 and cytokine polymorphisms with red blood cell(RBC) alloimmunization in Brazilian Myelodysplastic syndrome(MDS) patients with prior exposure to RBC transfusion. BACKGROUND: MDS patients are at risk RBC alloimmunization due to chronic RBC transfusion. However, differences in immune response of MDS transfused patients are not completely known. METHODS/MATERIALS: A retrospective cohort of 87 polytransfused patients with MDS including 28 alloimmunized (PA) and 59 non-alloimmunized (PNA) was evaluated in three Brazilian reference hospitals. HLA-DRB1genotype was performed by polymerase chain reaction (PCR)-SSOP (Luminex platform) and cytokine polymorphisms analysed by PCR and TaqMan assays. RESULTS: While HLA-DRB1 allele frequencies did not differ between groups, IL17A 197G > A SNP and IL4 polymorphisms showed significant correlation with RBC alloimmunization. IL17A 197A allele A and AA genotype were significantly more frequent in PA than PNA(A, 46.4% versus 27.1%, p = 0.012; OR = 2.3; 95%CI = 1.1-4.9; AA, 25% versus 6.8%, p = 0.041; OR = 6.2; 95%CI 1.3-30.8). Moreover, significant association of alloimmunization to Rh antigens with IL17A 197A allele and AA genotype was also identified in PA group(A, 45% versus 27.1%, p = 0.036; OR = 2.5; 95% CI 1.1-5.7; AA, 30% versus 6.8%, p = 0.042; OR = 7.9; 95%CI 1.5-42.3). Genotype A1A2 of IL4 intron 3 was overrepresented in PA(50% versus 16.9%, p = 0.009; OR = 4.97; 95%CI 1.6-15.5). Similarly, IL4-590 CT genotype was overrepresented in PA(53.6% versus 28.8%, p = 0.049; OR = 3.3; 95%CI 1.2-9.3). CONCLUSIONS: This study showed no association regarding HLA-DRB1 alleles for RBC alloimmunization risk or protection, however the IL17A 197G>A, IL4 intron 3 and IL4 590C>T SNP was significantly associated to RBC alloimmunization risk in this cohort of Brazilian MDS patients.

Botulinum Toxin A in the Management of a Gummy Smile: A Clinical Controlled Preliminary Study.

BACKGROUND: Botulinum toxin type A (BTX-A) is recent technique for the treatment of gummy smile. OBJECTIVES: The aim of this randomized controlled preliminary clinical trial was to evaluate the effects of BTX-A on excessive gingiva display (EGD) reduction, muscle activity, and patient satisfaction at 2, 8, 12, 16, 21, and 25 weeks. METHODS: Group 1 (G1) received 4 points of BTX-A application (2 U/point) for relaxation of the levator labii superioris alaeque nasi and levator labii superioris muscles; Group 2 (G2) received 2 points of BTX-A (2 U/point) for relaxation of only the levator labii superioris alaeque nasi muscle. RESULTS: A high dropout of patients from follow-up sessions occurred. Therefore, because of this data limitation, the results were considered a preliminary outcome. At 2 weeks, there was a significant difference between baseline regarding the reduction of EGD in G1 and G2, reduction in muscle activity in G1, and increased satisfaction in G1 and G2. At 2 weeks, there was no difference between the 2 groups. Statistically significant EGD reduction was maintained until 16 weeks in G2 and 25 weeks in G1. After 14 days there was a gradual recovery of muscle activity in both groups until recovery of baseline values by 25 weeks. Patients' satisfaction with treatment lasted 21 weeks in G1 and 16 weeks in G2. CONCLUSIONS: Increasing the number of BTX-A injection points resulted in a prolonged effect regarding EGD reduction and patient satisfaction but did not increase the intensity of the outcome. However, due to the high dropout of patients, this is a preliminary conclusion and further studies are necessary to confirm these results.

Effect of the attachment system on the biomechanical and clinical performance of overdentures: A systematic review.

STATEMENT OF PROBLEM: Overdentures can improve the quality of life of elderly patients compared with conventional complete dentures. Different attachment systems can be used to retain these prostheses, but which system results in better function, mechanical performance, and patient comfort is unclear. PURPOSE: The purpose of this systematic review was to evaluate randomized clinical trials to compare overdentures supported by either bar and clip or ball and O-ring attachments for retention, masticatory efficiency, bone loss, and patient satisfaction. MATERIAL AND METHODS: A literature search was conducted in the PubMed and Web of Science databases. From 163 studies, 16 randomized clinical trials were included in this systematic review based on the inclusion and exclusion criteria. The risk of bias was evaluated according to the RevMan software Risk of Bias Table (RoB Table), and only the studies with a low or intermediate risk of bias were included in the review. RESULTS: From the limited number of studies, the attachment type did not affect the masticatory quality of the patients, bone loss marginal to the implants, or the degree of patient satisfaction. However, overdentures with the bar and clip attachment tended to have higher initial retention than the ball and O-ring system. CONCLUSIONS: Both the bar and clip and ball and O-ring attachment systems presented similar clinical performance regarding mechanical and functional properties and patient satisfaction.

Monitoring of the process of waste landfill leachate diffusion in clay and sandy soil.

The objective of this research was to evaluate the interaction of landfill leachate of urban solid waste in clayey (CL) and sandy soils (SL) in order to determine physical and chemical parameters that can be used as indicators of soil contamination when there are faults in the landfill waterproofing. In the diffusion tests, compacted soil samples were placed in contact with leachate (methanogenic phase). The temporal analysis (200 days) considered the parameters pH, electrical conductivity (EC), alkalinity, nitrogen series, chemical oxygen demand (COD), solids and color for the leachate and pH, ΔpH, EC, total nitrogen (TN), chemical elements, and cation exchange capacity (CEC) for the soils. Correlation analysis and principal component analysis (PCA) were performed to results. It was observed that the studied soils have potential to attenuate chemicals present in the leachate; this indicates the possibility of using them as base in landfills. Correlation analysis and PCA carried out to CL showed that in a process of CL monitoring the pH would be the key parameter to indicate contamination of this soil, due to the high correlation of this parameter with the others analyzed. For the SL, the parameters pH, alkalinity, apparent color, and COD (total and filtered) could be used as indicators of contamination. In both soils, monitoring of concentrations of Ca, Mg, K, SB, V, and CTC can be used to indicate possible faults in the waterproofing system of the landfill.

Serum sclerostin is an independent predictor of mortality in hemodialysis patients.

BACKGROUND: Sclerostin (Scl) has recently emerged as a novel marker of bone remodeling and vascular calcification. However, whether high circulating Scl is also a risk factor for death is not well established. The purpose of this study was to test whether serum Scl would be associated with mortality. METHODS: we measured serum Scl in a hemodialysis patients' cohort, which was followed during a ten-year period. Competing risk regression models were applied, as during the follow-up, patients were exposed to both events kidney transplant and death. RESULTS: Ninety-one patients aged 42.3±18.8 years (55% of male gender, 15% of diabetes) were included. During the follow-up, 32 patients underwent kidney transplant and 26 patients died. Non-survivals presented higher FGF23, higher Scl and lower creatinine. There was an association between all-cause mortality and higher Scl (HR=2.2), higher age (HR=1.04) and presence of diabetes (HR=2.27), by competing risk analyses. Even including potential markers of mortality, as creatinine, FGF 23, and gender, Scl, age and diabetes remained significantly related to higher mortality. CONCLUSION: Serum Scl is an independent predictor of mortality in dialysis patients. However, whether clinical interventions to modulate Scl would be able to improve these patients survival needs to be determined.

The impact of chitosan in experimental resin with different photoinitiator systems.

OBJECTIVE: to investigate the effect of different concentrations of chitosan added to experimental resins containing either BAPO or camphorquinone (CQ) as photoinitiators, regarding degree of conversion (DC), flexural strength (FS), flexural elastic modulus (E), Knoop microhardness (KHN), cytotoxicity, genotoxicity and antimicrobial activity. METHODS: Experimental resins with polymeric matrix of BisGMA and TEGDMA was added either 0.5 wt% BAPO or 0.5 wt% camphorquinone/0.2% amine along with and chitosan concentrations of 0.5%; 1.0% or 2.0%. Degree of conversion was measured using Fourier transformed infrared spectroscopy. Flexural strength and elastic modulus were obtained through three-point bending test and Knoop microhardness was measured in a microidenter. Direct cytotoxicity was performed in human keratinocytes and genotoxicity test was done in murine macrophages cells. Antimicrobial activity was acessed against Staphylococcus aureus and Streptococcus mutans through the inhibition halo. Data were analyzed using two-way ANOVA and Tukey teste (α = 0.05). RESULTS: The materials containing photoinitiator BAPO showed higher values of DC, FS, E, and KHN compared to resins with CQ. The addition of chitosan did not affect the properties of these materials. However, in resins containing CQ, the addition of chitosan improve these properties compared to control group. For the groups containing BAPO the chitosan reduced cytotoxicity and genotoxicity compared to materials with camphorquinone. The materials with 1.0% and 2.0% chitosan showed increased antibacterial activity in the materials containing BAPO as photoinitiator for both bacteria. SIGNIFICANCE: The alternative photoinitiator BAPO and chitosan can improve physical and biological properties of photoactivated resins when compared with the materials with photoinitiator camphorquinone.

Antimicrobial and optical properties of a new biogenic silica-coated silver nanoparticles incorporated into experimental resin.

Background: Evaluate the effects of incorporating silica-coated silver nanoparticles (Ag@SiO2 NPs) into odontological clinic resin materials. Material and Methods: Silver nanoparticles coated with silicon dioxide were added to the experimental resin matrix at 1, 3, and 5wt%. Degree of conversion (DC), optical properties (total transmittance and color change), and microstructural analysis were evaluated. Materials were tested for silver ion release, cytotoxicity in dental pulp fibroblasts, Streptococcus mutans biofilm growth by Colony-Forming Unit (CFU) and confocal laser scanning microscopy (CLSM). Results: Groups had a similar DC, despite significant differences observed in transmittance and color change analysis for all groups with NPs. Silver ion release values were below the detection limit after 72h for all groups, and NPs incorporation did not show a statistical difference from the control on pulp fibroblasts assay. After 72h, the CFU count was significantly reduced by 74% from 3wt% of Ag@SiO2NPs. CLSM evaluation on S. mutans colonies showed a dose-dependent decrease in the emitted fluorescence. Conclusions: The application of Ag@SiO2 NPs in a resinous matrix, demonstrates a significant reduction of S. mutans CFU in oral biofilm, at concentrations from 3wt%, without an increase in cytotoxicity. The reduced transmittance values did not affect the DC, although a significant color change was perceived in all concentrations. Key words:Nanoparticles, Silver Compounds, Composite Dental Resin, Anti-Bacterial Agent, Optical Imaging.

Inducible nitric oxide synthase haplotype associated with migraine and aura.

Migraine is a complex neurological disorder with a clear neurogenic inflammatory component apparently including enhanced nitric oxide (NO) formation. Excessive NO amounts possibly contributing to migraine are derived from increased expression and activity of inducible NO synthase (iNOS). We tested the hypothesis that two functional, clinically relevant iNOS genetic polymorphisms (C(-1026)A-rs2779249 and G2087A-rs2297518) are associated with migraine with or without aura. We studied 142 healthy women without migraine (control group) and 200 women with migraine divided into two groups: 148 with migraine without aura (MWA) and 52 with aura (MA). Genotypes were determined by real-time polymerase chain reaction using the Taqman(®) allele discrimination assays. The PHASE 2.1 software was used to estimate the haplotypes. The A allele for the G2087A polymorphism was more commonly found in the MA group than in the MWA group (28 vs. 18%; P < 0.05). No other significant differences in the alleles or genotypes distributions were found (P > 0.05). The haplotype combining both A alleles for the two polymorphisms was more commonly found in the MA group than in the control group or in the MWA group (19 vs. 10 or 8%; P = 0.0245 or 0.0027, respectively). Our findings indicate that the G2087A and the C(-1026)A polymorphism in the iNOS gene affect the susceptibility to migraine with aura when their effects are combined within haplotypes, whereas the G2087A affects the susceptibility to aura in migraine patients. These finding may have therapeutic implications when examining the effects of selective iNOS inhibitors.

Interaction among nitric oxide (NO)-related genes in migraine susceptibility.

The pathogenic mechanisms involved in migraine are complex and not completely clarified. Because there is evidence for the involvement of nitric oxide (NO) in migraine pathophysiology, candidate gene approaches focusing on genes affecting the endothelial function have been studied including the genes encoding endothelial NO synthase (eNOS), inducible NO synthase (iNOS), and vascular endothelial growth factor (VEGF). However, investigations on gene-gene interactions are warranted to better elucidate the genetic basis of migraine. This study aimed at characterizing interactions among nine clinically relevant polymorphisms in eNOS (T(-786)C/rs2070744, the 27 bp VNTR in intron 4, the Glu298Asp/rs1799983, and two additional tagSNPs rs3918226 and rs743506), iNOS (C(-1026)A/rs2779249 and G2087A/rs2297518), and VEGF (C(-2578)A/rs699947 and G(-634)C/rs2010963) in migraine patients and control group. Genotypes were determined by real-time polymerase chain reaction using the Taqman(®) allele discrimination assays or PCR and fragment separation by electrophoresis in 99 healthy women without migraine (control group) and in 150 women with migraine divided into two groups: 107 with migraine without aura and 43 with aura. The multifactor dimensionality reduction method was used to detect and characterize gene-gene interactions. We found a significant interaction between eNOS rs743506 and iNOS 2087G/A polymorphisms in migraine patients compared to control group (P < 0.05), suggesting that this combination affect the susceptibility to migraine. Further studies are needed to determine the molecular mechanisms explaining this interaction.

Effects of the crosslinking of chitosan/DCPA particles in the antimicrobial and mechanical properties of dental restorative composites.

The development of restorative materials containing antibacterial agents is an alternative to reduce the progression of caries lesions. OBJECTIVE: to compare the influence of the degree of crosslinking of chitosan particles loaded with dibasic calcium phosphate (DCPA) on the mechanical properties, degree of conversion (DC), and antimicrobial properties of experimental composites. METHODS: Chitosan/DCPA particles were synthesized by the electrospraying, crosslinked by 0, 8, or 16 h in glutaraldehyde, and characterized by zeta potential and minimum inhibitory concentration (MIC) against S. mutans. Experimental resin composites of Bis-GMA and TEGDMA and 59.5% of barium glass were synthesized, chitosan/DCPA particles were added at 0 or 0.5 wt% with the different crosslinking time. The materials were subject to DC analysis, three-point bending test at 24 h and 7 days, and antimicrobial assays. Data were submitted to one-way ANOVA and Tukey test (α = 0.05). RESULTS: The particles with longer crosslinking time presented higher zeta potential and MIC, and the composite containing these particles showed significantly higher biofilm inhibition than the control group. The other two groups were similar to each other and the control. The composite containing particles with 88 h crosslinking time showed the lowest flexural strength at 7 days in water, and materials with non-crosslinked particles and longer crosslinking time presented flexural strength similar to control. The flexural modulus and DC showed no statistical difference among groups. SIGNIFICANCE: composite resin containing 0.5% chitosan/DCPA particles crosslinked by 16 h showed a reduction of biofilm formation without affecting the mechanical properties in relation to the control.

Pro-angiogenic potential of a functionalized hydrogel scaffold as a secretome delivery platform: An innovative strategy for cell homing-based dental pulp tissue engineering.

Angiogenesis is a key process that provides a suitable environment for successful tissue engineering and is even more crucial in regenerative endodontic procedures, since the root canal anatomy limits the development of a vascular network supply. Thus, sustainable and accelerated vascularization of tissue-engineered dental pulp constructs remains a major challenge in cell homing approaches. This study aimed to functionalize a chitosan hydrogel scaffold (CS) as a platform loaded with secretomes of stem cells from human exfoliated deciduous teeth (SHEDs) and evaluate its bioactive function and pro-angiogenic properties. Initially, the CS was loaded with SHED secretomes (CS-S), and the release kinetics of several trophic factors were assessed. Proliferation and chemotaxis assays were performed to analyze the effect of functionalized scaffold on stem cells from apical papilla (SCAPs) and the angiogenic potential was analyzed through the Matrigel tube formation assay with co-cultured of human umbilical vein endothelial cells and SCAPs. SHEDs and SCAPs expressed typical levels of mesenchymal stem cell surface markers. CS-S was able to release the trophic factors in a sustained manner, but each factor has its own release kinetics. The CS-S group showed a significantly higher proliferation rate, accelerated the chemotaxis, and higher capacity to form vascular-like structures. CS-S provided a sustained and controlled release of trophic factors, which, in turn, improved proliferation, chemotaxis and all angiogenesis parameters in the co-culture. Thus, the functionalization of chitosan scaffolds loaded with secretomes is a promising platform for cell homing-based tissue engineering.

Comparison of two-step versus four-step composite finishing/polishing disc systems: evaluation of a new two-step composite polishing disc system.

OBJECTIVE: The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS: Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Durafill-D), nanofill (Filtek Supreme-FS), nanohybrid (Premise-PR), and microhybrids (Filtek Z250-FZ, Esthet-EX). One side of each specimen was initially finished with a carbide bur. Five specimens of each resin composite were randomly assigned to receive full F/P by each of the disc systems: two-step (Enhance Flex NST-EF) and four-step (Sof-Lex-SL, Super-Snap-SS). Surface gloss was measured with a glossmeter and surface roughness was measured with a profilometer. Results were analyzed by two-way analysis of variance (ANOVA)/Tukey's (α<0.05). RESULTS: No difference in gloss was noted among the three F/P systems when used with D and EX; no difference between SL and EF when used with any composite, except for FS; and no difference between SL and SS when used with any composite. SL and EF showed similar surface roughness when used on all composites, except for EX. EF and SS showed similar surface roughness on PR. SL and SS showed similar surface roughness values on every composite, except for FZ. CONCLUSIONS: EF was capable of providing similar gloss and surface roughness to SL on four composites evaluated but was not able to produce as glossy or as smooth a surface as SS for three of the five composites.

Influence of 35% hydrogen peroxide gel renewal on color change during in-office dental photobleaching with violet LED: A split-mouth randomized controlled clinical trial.

BACKGROUND: To clinically evaluate the effect of 35% hydrogen peroxide gel renewal in association with violet LED (405-410nm) through a split-mouth randomized controlled clinical trial. METHODS: The treatment consisted in 3 bleaching sessions of 15 min each, with an interval of 7 days between them, using 35% hydrogen peroxide combined to violet LED irradiation. Selected patients had two experimental segments for the split-mouth design: No change of the bleaching gel during each session (NBGR) and 3 changes of the bleaching gel every 5 min for each session (BGR). During the 3 bleaching sessions, the selected quadrant received the same treatment. Patients had their upper canines and central incisors teeth color measured with a subjective (color scale - VITA Classical) and an objective (spectrophotometer - VITA Easyshade) method and their teeth sensitivity measured using a Visual Analog Scale (VAS) before, immediately after each bleaching session, and 14 days and 2 months (60 days) after the end of the treatment. RESULTS: The protocol adopted in the present study reached satisfactory results regarding color change. No statistical difference between groups was observed immediately after the end of the treatment and in the follow-up analysis for both subjective and objective color evaluation. No difference in tooth sensitivity between segments was observed. CONCLUSION: There is no need for bleaching gel renewal when following the clinical protocol of 3 sessions of 15 min in a bleaching protocol of 35% hydrogen peroxide combined with violet LED.

Physical and Biological Properties of a Chitosan Hydrogel Scaffold Associated to Photobiomodulation Therapy for Dental Pulp Regeneration: An In Vitro and In Vivo Study.

BACKGROUND: The regeneration of dental pulp, especially in cases of pulp death of immature teeth, is the goal of the regenerative endodontic procedures (REPs) that are based on tissue engineering principles, consisting of stem cells, growth factors, and scaffolds. Photobiomodulation therapy (PBMT) showed to improve dental pulp regeneration through cell homing approaches in preclinical studies and has been proposed as the fourth element of tissue engineering. However, when a blood clot was used as a scaffold in one of these previous studies, only 30% of success was achieved. The authors pointed out the instability of the blood clot as the regeneration shortcoming. Then, to circumvent this problem, a new scaffold was developed to be applied with the blood clot. The hypothesis of the present study was that an experimental injectable chitosan hydrogel would facilitate the three-dimensional spatial organization of endogenous stem cells in dental pulp regeneration with no interference on the positive influence of PBMT. METHODS: For the in vitro analysis, stem cells from the apical papilla (SCAPs) were characterized by flow cytometry and applied in the chitosan scaffold for evaluating adhesion, migration, and proliferation. For the in vivo analysis, the chitosan scaffold was applied in a rodent orthotopic dental pulp regeneration model under the influence of PBMT (660 nm; power output of 20 mW, beam area of 0.028 cm2, and energy density of 5 J/cm2). RESULTS: The scaffold tested in this study allowed significantly higher viability, proliferation, and migration of SCAPs in vitro when PBMT was applied, especially with the energy density of 5 J/cm2. These results were in consonance to those of the in vivo data, where pulp-like tissue formation was observed inside the root canal. CONCLUSION: Chitosan hydrogel when applied with a blood clot and PBMT could in the future improve previous results of dental pulp regeneration through cell homing approaches.

Photodynamic therapy and Acyclovir in the treatment of recurrent herpes labialis: A controlled randomized clinical trial.

BACKGROUND: Herpes Simplex Virus Type 1 (HSV-1) is one of the most widespread infections that can effect the orofacial region. Recurrent infection is considered a life-long oral health problem, leading to pain, discomfort, and social restriction due to esthetic features when active. Effective therapies are needed. This study aimed to compare photodynamic therapy (PDT), Topical Acyclovir (AC), and the association of both in the healing process and self-reported symptomologies of HSV-1 recurrences. METHODS: Patients were randomly assigned into 3 groups (n = 25): PDT (low-power laser, 660 nm, 40 mW, 120 J/cm2, 4.8 J, 120 s per point) and methylene blue (0.005 %) as photosensitizer; AC (5%); PDT + AC.Data concerning lesion size, healing time, and self-reported healing parameters, such as pain, tingling, and edema were taken every day up to complete healing for all studied groups. RESULTS: There was no significant difference in healing time and pain between groups. AC group showed a significant minor reduction of the lesion compared to the AC-PDT group on day 1. Regarding edema and tingling, the comparison of treatments showed a statistical difference only on day 1, where PDT showed better results. CONCLUSION: With all the limitations of this study, it can be concluded that only on day 1 PDT showed positive effects in the treatment of herpes lesions in comparison to AC.

Effect of three different attachment designs in the extrusive forces generated by thermoplastic aligners in the maxillary central incisor.

INTRODUCTION: Orthodontic aligners use have increased in dentistry. The resolution of complex movements such as extrusion demands the use of attachments to reach the aimed force, but just a few studies have been developed to evaluate the biomechanical performance of the aligners and their accessories. OBJECTIVE: The objective of this study was to evaluate on the three axes (X, Y and Z) the forces generated by three different attachment designs for the extrusion of the maxillary central incisor using esthetic orthodontic aligners. METHODS: Three prototypes of maxillary models were developed, each one with a specific attachment inserted in the central incisor. Three aligners were manufactured for each of the three attachment designs, with 0.33-mm activation in the direction of the extrusion. An analytical device was used to evaluate the forces applied to the three axes by each aligner/attachment. The data were assessed by one-way ANOVA and Tukey's test (α = 0.05). RESULTS: All of the studied attachment designs could satisfactorily perform the extrusion movement. However, force intensities were different in the three designs (design 1 = 2.5 N; design 2 = 2.2 N, and design 3 = 1.1 N). Furthermore, two of the three attachment designs (designs 1 and 2) eventually exerted significant forces on the X (mesiodistal) and Y (buccopalatal) axes. CONCLUSION: The attachment design 3 presents the best distribution of forces for extrusion movement, generating almost null forces on X and Y axes, and lower intensity of force on the Z axis.

Knowledge, attitudes, and practices of undergraduate students concerning Regenerative Endodontics.

BACKGROUND: Knowledge, attitudes, and beliefs of the students are important for the Tissue Engineering in Endodontic practice. The opinion of these future dentists would ultimately will decide the endurance of REPs as routine procedures in endodontic practice. The aim of this study was to perform a survey to identify the knowledge, attitudes, and practices of undergraduate students about regenerative endodontic procedures (REPs). METHODS: The questionnaire was obtained after cross-cultural adaptation of a questionnaire previously applied in USA and was applied to two hundred forty-eight undergraduates. Data were statistically analyzed. RESULTS: Most of the students (82.9%) agreed that regenerative therapy should be incorporated to dentistry and 87.5% of them believed that stem cells banks would be useful for the tissue regeneration. Most participants (58.1%) would like to obtain an internship/tutoring that addresses REPs and 80.8% of participants think that the major obstacle to a patient accepting a REP was the expected high cost of the treatment. The freshmen students were more optimistic about offering stem cell treatments to their patients (P≤0.05). CONCLUSIONS: The undergraduates were very optimistic about the future of REPs, stem cell banking, and tissue engineering. Although seniors demonstrated less enthusiasm towards REPs than the freshman, most students are willing to recommend these treatments to their patients.

Biogenic synthesis and antimicrobial activity of silica-coated silver nanoparticles for esthetic dental applications.

OBJECTIVES: this study aimed to synthesize AgNPs from green tea (GT) extract, forming GT-AgNPs, and to coat their surfaces with silica, resulting in light-colored Ag@SiO2 nanoparticles. MATERIALS AND METHODS: particles were characterized and tested for minimal inhibitory concentration (MIC), biofilm formation against Streptococcus mutans and cytotoxicity evaluation on dental pulp fibroblasts. RESULTS: X-ray diffraction (XRD) confirmed the formation of pure AgNPs, whereas energy dispersive X-ray spectroscopy (EDS) mapped their elemental atoms. Dynamic light scattering (DLS) demonstrated formation of particles at nanoscale, with moderate polydispersity and negative zeta potential, in agreement with nanoparticle tracking analysis (NTA) size measurements. Fourier-transformed infrared (FTIR) spectroscopy confirmed the successful condensation of silica, which significantly increased surface area by 50%, as assayed by surface area analysis (BET). Thermogravimetric analysis showed a 18%-mass of silica on the surface of Ag@SiO2NPs. Transmission electron microscopy (TEM) displayed the spherical shape of nanoparticles and average size of 11 nm for GT-AgNPs and Ag@SiO2NPs. Ag@SiO2NPs demonstrated potent antimicrobial action against S. mutans, with MIC determined as 600 µg/mL, and inhibition of approximately 44% (p < 0.05) of biofilm formation. At the MIC concentrations, both NPs did not exhibit cytotoxicity. CONCLUSION: Ag@SiO2NPs might have a useful application in dental materials. CLINICAL SIGNIFICANCE: The possibility of incorporating antimicrobial properties in restorative materials without compromising esthetics makes the AgNPs@SiO2 NPs promising agents against S. mutans biofilm formation, hence the prevention of dental caries. This represents a great step towards the development of more interactive biomaterials in dentistry to overcome clinical problems.