RESUMEN
A new supramolecular electrocatalyst for Oxygen Evolution Reaction (OER) was synthesized from a central multibridging cobalt tetrapyridylporphyrazine (CoTPyPz) species by attaching four [Ru(bpy)2Cl]+ groups. Both CoTPyPz and the tetraruthenated cobalt porphyrazine species, TRuCoTPyPz, form very homogenous molecular films just by dropcasting their methanol solutions onto GCE electrodes. Such films exhibited low overpotentials for O2 evolution, e.g., 560 e 340 mV, respectively, displaying high stability, typically exceeding 15 h. The kinetic parameters obtained from the Tafel plots showed that the peripheral complexes are very important for the electrocatalytic activity. Hyperspectral Raman images taken along the electrochemical process demonstrated that the cobalt center is the primary active catalyst site, but its performance is enhanced by the ruthenium complexes, which act as electron-donating groups, in the supramolecular system.
Asunto(s)
Cobalto , Rutenio , Catálisis , Cobalto/química , Electrones , Oxígeno/químicaRESUMEN
Porphyrins and phthalocyanines are promising π-conjugated compounds with fantastic photochemical and electrochemical properties which are present in nature in more systems than we are generally aware. The electrochemical properties of these large aromatic molecules are also unique, endowing them with the ability to catalyze a wide range of redox reactions. The macrocycle core of these molecules is extremely favorable for the complexation of several metal ions, resulting in molecules with tunable properties. Porphyrins and phthalocyanines are able to form highly organized films, with high conductivity and great robustness and their use was explored to build a great number of electrochemical and photoelectrochemical sensors for many varied applications, one among them being drug analysis. This review will focus on the potential of the electrodes modified with attractive porphyrins and phthalocyanines for this application. The papers published in the last 3 years were closely evaluated.
Asunto(s)
Electroquímica/métodos , Indoles/química , Compuestos Macrocíclicos/química , Preparaciones Farmacéuticas/análisis , Porfirinas/química , IsoindolesRESUMEN
Gas sensors are fundamental for continuous online monitoring of volatile organic compounds. Gas sensors based on semiconductor materials have demonstrated to be highly competitive, but are generally made of expensive materials and operate at high temperatures, which are drawbacks of these technologies. Herein is described a novel ethanol sensor for room temperature (25 °C) measurements based on hematite (αFe2O3)/silver nanoparticles. The AgNPs were shown to increase the oxide semiconductor charge carrier density, but especially to enhance the ethanol adsorption rate boosting the selectivity and sensitivity, thus allowing quantification of ethanol vapor in 2-35 mg L-1 range with an excellent linear relationship. In addition, the α-Fe2O3/Ag 3.0 wt% nanocomposite is cheap, and easy to make and process, imparting high perspectives for real applications in breath analyzers and/or sensors in food and beverage industries. This work contributes to the advance of gas sensing at ambient temperature as a competitive alternative for quantification of conventional volatile organic compounds.
RESUMEN
A highly sensitive sensor for quantification of uric acid (UA) directly in body fluids (saliva and sweat) is reported, working at a potential as low as 0.0 V vs Ag/AgCl. New mixed hydroxide materials exhibiting stable electrocatalytic responses from alkaline to acidic media were prepared, their structure was thoroughly characterized, and the electrochemical properties of the modified FTO (fluorine-doped tin oxide) electrodes were evaluated for UA determination by cyclic voltammetry, chronoamperometry, and batch injection analysis. A very low limit of detection (2.3 × 10-8 mol L-1) with good repeatability (RSD = 3.2% for 30 successive analyses) was achieved based on a fast and simple BIA procedure. Finally, α-Ni0.75Zn0.25(OH)2 screen-printed electrodes (SPE) were developed for the measurement of UA directly in real saliva and sweat samples, without interference of ascorbic acid, acetaminophen, lactate, and glucose at their typical concentrations present in those body fluids, revealing high potential for application as disposable sensors in biological systems. Graphical abstract.
Asunto(s)
Técnicas Electroquímicas/métodos , Hidróxidos/química , Saliva/química , Sudor/química , Ácido Úrico/análisis , Catálisis , Técnicas Electroquímicas/instrumentación , Electrodos , Humanos , Límite de Detección , Níquel/química , Oxidación-Reducción , Reproducibilidad de los Resultados , Ácido Úrico/química , Zinc/químicaRESUMEN
High-entropy materials have received notable attention concern on account of their unique structure, tunable properties, and unprecedented potential applications in many fields. In this work, for the first time a NiCoMnZnMg-containing high-entropy glycerolate (HE-Gly) particles has been synthesized using a scalable solvothermal method. The HE-Gly particles were used as a precursor in design of porous high-entropy oxide (HEO) microparticles. The morphological and structural characterizations demonstrate that the temperature of the annealing process, and the composition of the metal ions in the HE-Gly precursors play important roles in determining porosity, crystallinity, and phase separation in HEOs. In fact, HE-Gly exhibited a porous structure of spinel HEOs with secreted MgO phase after annealing process at 800 °C, while the annealing process at 400 °C led to a low-crystallinity spinel phase without phase segregation. Overall, this work describes HE-Gly as a new precursor for altering the composition, crystallinity, and porosity of HEOs. This strategy is scalable for potential high mass productions, paving a new path toward industrial application of high-entropy materials.
RESUMEN
While polyelemental alloys are shown to be promising for healthcare applications, their effectiveness in promoting bacterial growth remains unexplored. In the present work, we evaluated the interaction of polyelemental glycerolate particles (PGPs) with Escherichia coli (E. coli) bacteria. PGPs were synthesized using the solvothermal route, and nanoscale random distribution of metal cations in the glycerol matrix of PGPs was confirmed. We observed 7-fold growth of E. coli bacteria upon 4 h of interaction with quinary glycerolate (NiZnMnMgSr-Gly) particles in comparison to control E. coli bacteria. Nanoscale microscopic studies on bacteria interactions with PGPs showed the release of metal cations in the bacterium cytoplasm from PGPs. The electron microscopy imaging and chemical mapping indicated bacterial biofilm formation on PGPs without causing significant cell membrane damage. The data showed that the presence of glycerol in PGPs is effective in controlling the release of metal cations, thus preventing bacterial toxicity. The presence of multiple metal cations is expected to provide synergistic effects of nutrients needed for bacterial growth. The present work provides key microscopic insights of mechanisms by which PGPs enhance biofilm growth. This study opens the door for future applications of PGPs in areas where bacterial growth is essential including healthcare, clean energy, and the food industry.
Asunto(s)
Escherichia coli , Glicerol , Glicerol/farmacología , Membrana Celular , AleacionesRESUMEN
Bimetallic oxides have significant attraction as supercapacitor electrode materials due to their highly reversible redox processes, which are commonly associated with their surface chemistry and morphological features. Here, we report the synthesis, characterization, and electrochemical evaluation of bimetallic oxides with different molar compositions of Co and V (Co0.6V0.4, Co0.64V0.36, Co0.68V0.32, and Co0.7V0.3 denoted as S1, S2, S3, and S4 samples, respectively). The materials were synthesized by a modified solvothermal method using glycerol as a stabilizing agent, characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy, N2 adsorption isotherms, cyclic voltammetry, and galvanostatic charged/discharged in a three-electrode cell. The role of the CoV oxide compositions on the pseudocapacitive properties was studied through the analysis of the energy storage mechanism following the power law and Dunn's methodology to obtain the b values. An important finding of this work is that CoV oxides exhibited electrochemical characteristics of a pseudocapacitive electrode material even though the charge storage occurs in bulk. This behavior is consistent with the pseudocapacitance generated by redox processes, showing b values of 0.67, 0.53, 0.75, and 0.84, with a capacitive current contribution of 74, 74, 63, and 70% analyzed at a scan rate of 1 mV s-1, for S4, S3, S2, and S1 samples, respectively. Co0.7V0.3 (S4) oxide presented the highest specific capacitance of 299 F g-1 at 0.5 A g-1 with a Coulombic efficiency of 93% tested at 4 A g-1. The better electrochemical performance of this sample was attributed to the synergistic effect of the Co and V atoms since a minimum amount of V in the structure may distort the crystal lattice and improve the electrolyte diffusion, in addition to the formation of several oxidation states due to reduction of V5+, including V3+ and V4+ as well as to the formation of the metastable V4O9.
RESUMEN
The history of ferrites comes from many centuries and was fundamental in many fields. Initially, ferrites were extracted directly from nature, but in the last century, scientists learned to produce ferrites with different properties that gave origin to many advances in industrial and instrumental applications. More recently, the designed preparation of ferrites with nanometric size revealed remarkable characteristics. In the last years, different spinel ferrites were used as electroactive layers to build high-performance modified electrodes. In this review, it is presented a critical overview of the utilization of spinel ferrites (with a general formula MFe2O4, where M2+ = Mg2+, Ni2+, Co2+, Cu2+, Mn2+ and Zn2+) to create differentiated voltammetric sensors. The association of these materials with graphene, glassy carbon, carbon nitride, ionic liquids, nanoparticles of noble metals, oxides of transition metals and other materials can produce notable synergic responses towards electrochemical activity. Some of these sensors can produce very sensitive signals and ample concentration ranges for compounds such hydrogen peroxide, glucose and bisphenol A, and present potential for many other applications. Along this review, all these aspects will be discussed and the main results are organized in tables, using as a base the metal associated with the ferrite.
Asunto(s)
Grafito , Líquidos Iónicos , Grafito/química , Peróxido de Hidrógeno , Óxidos/química , Metales , Carbono , Zinc/química , GlucosaRESUMEN
In this work, nanoporous gold (NPG) was prepared according to three different approaches, such as (i) anodization-electrochemical reduction (A-ECR, NPGA), (ii) dynamic hydrogen bubble template (DHBT, NPGB), and (iii) the combination of both methods (NPGA+B). Field-emission scanning electron microscopy (FE-SEM) and cyclic voltammetry (CV) were used to investigate the structural morphology and the electrochemical behavior of the fabricated materials. The NPGA+B electrode showed a large amount of surface defects and/or edges, greater electrochemical surface area (2.5 cm2), and increased roughness factor (35.4). Such outstanding features of the NPGA+B platform were demonstrated by the sensitive detection of methyl parathion (MP) in river water samples. CV results indicated nearly 25-fold, 6-fold, and 2.5-fold higher sensitivity for NPGA+B compared to that of bare Au, NPGA, and NPGB, respectively. Differential pulse voltammetry (DPV) results show a linear behavior in the MP concentration range of 5-50 ng mL-1 with a limit of detection (LOD) of 0.6 ng mL-1 and limit of quantification (LOQ) of 2.0 ng mL-1. Besides, the NPGA+B sensor also revealed excellent selectivity towards MP detection in the presence of other interfering molecules or ions, reproducibility, and repeatability.
RESUMEN
Cocaine (COC) is one of the most widely consumed illegal drugs around the world. Street COC is commonly adulterated with pharmaceutical compounds that mimic or intensify the COC's sensory effect. Adulteration is performed to increase the profit of criminal organizations and each one has their own way of doing it. Therefore, determining the composition of seized COC samples (chemical profile) provides evidence for the police to track criminal organization networks and their activity patterns. Using filter paper as a substrate, we developed a multiple detection paper-based analytical device (PAD) that combines colorimetric and electrochemical measurements to discriminate COC samples according to adulterant's content. A regular graphite lead modified with a gold film made from Au leaf (graphite/Au) to improve electron transfer was used as a working electrode. Silver and Ag/AgCl were used as auxiliary and reference electrodes, respectively. The colorimetric device was patterned using a laser cutter and coupled to the electrochemical device using a double-sided tape, allowing simultaneous analysis to gather more analytical information about COC samples. Graphite/Au was characterized by scanning and transmission electron microscopies and electrochemical assays. The simultaneous colorimetric and electrochemical analyses combined to principal component analysis improved the analytical characterization of COC trial samples and provided a fast discrimination based on the assembled database.
RESUMEN
Tuning the electrocatalytic properties of high surface area porous metallic frameworks like Nanoporous Gold (NPG) by tailoring the structure is a convenient strategy to design electrochemical sensors. Accordingly, an NPG-based sensitive, selective and robust electroanalytical platform was designed for the detection of ascorbic acid (AA) in acidic extracts of Aspergillus fumigatus fungus and Arabidopsis thaliana leaves. NPG films were electrodeposited on a gold microelectrode by potentiostatic electrodeposition and characterized by electron microscopy techniques, which confirmed the morphology and highly porous structure resembling nanowires-type pure gold fractals. The electrodeposition parameters, particularly deposition potential and time, were optimized to achieve large and selective amperometric detection of AA on the NPG modified electrodes. Faster electron transfer kinetics was manifested on the 0.3â¯V shift in overpotential and remarkable enhancement of the oxidation peak current as compared with bare gold electrode. Amperometric measurements were performed at 0.3â¯V vs. Ag/AgCl(sat. KCl) in the highly acidic electrolyte solution employed to extract ascorbate from biological samples and minimize its autoxidation. The sensitivity of conventional Au-microelectrodes was increased about one thousand-fold upon modification with NPG film, reaching 2â¯nA⯵mol-1â¯L-1. The detection limit for AA based on a linear current-concentration calibration plot was found to be 2⯵molâ¯L-1. The NPG-based microsensor was demonstrated to be selective, reproducible and stable, and was employed for determinations of AA concentration in highly acidic biological extracts.
Asunto(s)
Ácido Ascórbico/análisis , Técnicas Electroquímicas/métodos , Oro/química , Nanocables/química , Arabidopsis/química , Ácido Ascórbico/química , Aspergillus fumigatus/química , Técnicas Electroquímicas/instrumentación , Concentración de Iones de Hidrógeno , Límite de Detección , Microelectrodos , Nanoporos , Oxidación-Reducción , Extractos Vegetales/análisis , Hojas de la Planta/química , Porosidad , Reproducibilidad de los ResultadosRESUMEN
Flavylium cations are synthetic analogues of anthocyanins, the natural plant pigments that are responsible for the majority of the red, blue, and purple colors of flowers, fruits, and leaves. Unlike anthocyanins, the properties and reactivity of flavylium cations can be manipulated by the nature and position of substituents on the flavylium cation chromophore. Currently, the most promising strategies for stabilizing the color of anthocyanins and flavylium cations appear to be to intercalate and/or adsorb them on solid surfaces and/or in confined spaces. We report here that hybrid pigments with improved thermal stability, fluorescence, and attractive colors are produced by the cation-exchange-mediated adsorption of flavylium cations (FL) on two synthetic clays, the mica-montmorillonite SYn-1, and the laponite SYnL-1. Compared to the FL/SYn-1 hybrid pigments, the FL/SYnL-1 pigments exhibited improved thermal stability as judged by color retention, better preferential adsorption of the cationic form of FL1 at neutral to mildly basic pH (pH 7-8), and lower susceptibility to color changes at pH 10. Although both clays adsorb the cationic form on their external surfaces, SYnL-1 gave more evidence of adsorption in the interlayer regions of the clay. This interlayer adsorption appears to be the contributing factor to the better properties of the FL/SYnL-1 hybrid pigments, pointing to this clay to be a promising inorganic matrix for the development of brightly colored, thermally more stable hybrid pigments based on cationic analogues of natural plant pigments.
RESUMEN
This study reports the preparation and characterization of nickel/lead hydroxide nanoparticles used to construct electrochemical sensors, which were investigated for amperometric quantification of N-acetylcysteine (NAC). The newly synthesised material presents good uniformity, with the lead (II) ions homogenously incorporated into the alpha nickel hydroxide crystal structure, confirmed by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy analyses. Films of nanoparticles (3â¯nm in size) were prepared on conductive fluorine-doped tin oxide-coated glass slides and used connected to a specially built batch injection analysis (BIA) cell with a capacity of only 4â¯mL and the electrode positioned in the bottom. To attain optimal analytical performance, the main parameters for BIA measurements (volume injected, different velocities of injection and best distance of the pipette from the electrode) were evaluated, as was the working potential, to determine the optimal conditions. Linear responses were obtained for the concentration range from 20 to 220 µmol L-1, and the limits of detection (3σ/slope) and quantification (10σ/slope) were calculated as 0.23 µmol L-1 and 0.70 µmol L-1, respectively. The new NAC sensor does not exhibit a memory effect and has enormous potential utility in the quantitative determination of N-acetylcysteine in drugs. The results of the analysis of NAC obtained using BIA presented good concordance with those obtained by chromatography. The analytical frequency attained using BIA (120 analysis h-1) compares very favourably with the one obtained using chromatography (6 analysis h-1).
Asunto(s)
Acetilcisteína/análisis , Técnicas Electroquímicas , Análisis de Inyección de Flujo , Hidróxidos/química , Nanoestructuras/química , Técnicas Electroquímicas/instrumentación , Electrodos , Análisis de Inyección de Flujo/instrumentaciónRESUMEN
The Raman spectral profile of p-methylcarbohydrazonethioamide (MCHT) is completely changed due to strong SERS effects upon bonding onto gold nanoparticles surface, but some vibrational modes are further enhanced in the presence of Hg(II) ions. The lack of SERS response for most common metal ions indicates that the coordinating groups are interacting with the gold nanoparticles surface and not available for binding metal ions in solution, except for mercury ions. The selective enhancement of some vibrational modes is consistent with significant conformational changes upon binding of Hg(II) ion onto the AuNP@MCHT hybrid, as confirmed by TEM/EDS measurements, demonstrating its potentiality as a highly selective and sensitive SERS substrate.