Polyurethane degradation by extracellular urethanase producing bacterial isolate Moraxella catarrhalis strain BMPPS3.

Plastic waste has become a global issue and a threat to the ecosystem. The present study isolated polyurethane (PU) degrading bacterial species from soil dumped with plastic wastes. Four bacterial isolates, RS1, RS6, RS9 and RS13 were obtained and their ability to degrade PU in a synthetic medium with PU as a sole source of carbon was assessed individually. After thirty days of incubation, the highest PU weight loss of 67.36 ± 0.32% was recorded in the medium containing RS13 isolate. The results of FTIR revealed the occurrence of carbonyl peaks. The putative isolate RS13 confirmed with the genus Moraxella according to 16S rRNA gene sequencing and the isolate was specified as Moraxella catarrhalis strain BMPPS3. The restriction analysis of Moraxella catarrhalis strain BMPPS3 revealed that the GCAT content to 51% and 49% correspondingly. Moraxella catarrhalis strain BMPPS3 was able to colonize on PU surface and form a biofilm as revealed by SEM investigation. Fatty acids and alkanes were found to be the degradation products by GC-MS analysis. The presence of these metabolites facilitated the growth of strain RS13 and suggested that ester hydrolysis products had been mineralized into CO2 and H2O. Extracellular biosurfactant synthesis has also been found in Moraxella catarrhalis strain BMPPS13 inoculated with synthetic media and mineral salt media containing PU and glucose as carbon sources, respectively with a significant level of cell-surface hydrophobicity (32%). The production and activity of extracellular esterase showed consistent increase from day 1-15 which peaked (1.029 mM/min/mg) on day 24 significantly at P < 0.001. Crude biosurfactants were lipopeptide-based, according to the characteristic investigation. According to this study findings, Moraxella catarrhalis produces biosurfactants of the esterase, urethanase and lipase (lipopeptide) types when carbon source PU is present.

Recent Development in Nanoparticle-Assisted Microbial Fuel Cell for Enhanced Reduction of Chromium.

Chromium metal is a potential toxin released by various industries as by products. Reduction of the same costs an ample amount of manpower and wealth. Alternate, economical, efficient, and sustainable form of chromium reduction while generating electricity is a boon that microbial fuel cell (MFC) has provided to man. It paves way for an attractive technique to process hazardous elements. Nature as well as the type of electrode modulates the efficiency of reduction and power production. Many previously published studies have reviewed chromium removal from effluents as well as through MFCs, but utilization of nanoparticle-based MFC for chromium removal has not been exclusively done before. Hence, the objective of the current review is to provide exclusive study on nanoparticle-assisted MFC for chromium reduction. Reputed published data from the past 5 years have been studied meticulously to compare the best outcomes of MFC in chromium removal. Chromium is found to be removed mostly in double-chambered MFC with a maximum removal of 100% when iron is used as an electrode. Removal of the same has led to generation of maximum power of 1965.4 mW m-2 when palladium nanoparticles are used at the electrode. Removal rates of Cr(VI) from a mixture of NiCo2O4, MoS2, and graphite felt in a dual-chamber MFC showed an 8.13% increase after 24 h of light exposure. Another efficient setup used MoS2 nanosheets and Alpha-FeOOH nanoparticles in a dual-chamber MFC to completely remove Cr(VI) and achieve a high removal ratio of 91.45%. The current study reviews the recent updates in chromium reduction through MFC and its significance in future as a potential instrument for bioremediation and energy source.

Luminous blue carbon quantum dots employing Anisomeles indica (catmint) induce apoptotic signaling pathway in triple negative breast cancer (TNBC) cells.

Herein, luminous blue carbon quantum dots (CDs) employing Anisomeles indica (Catmint) were reported with imaging, self-targeting, and therapeutic effects on triple-negative breast cancer (TNBC, MDA-MB-231) cells. The salient features of CDs generated from catmint are as follows: i) optical studies confirm CDs with excitation-dependent emission; ii) high-throughput characterization authenticates the formation of CDs with near-spherical shape with diameter ranging between 5 and 15 nm; iii) CDs induce cytotoxicity (3.22 ± 0.64 µg/ml) in triple-negative breast cancer (TNBC, MDA-MB-231) cells; iv) fluorescence microscopy demonstrates that CDs promote apoptosis by increasing reactive oxygen species (ROS) and decreasing mitochondrial membrane potential; v) CDs significantly up-regulate pro-apoptotic gene expression levels such as caspases-8/9/3. Finally, our work demonstrates that catmint-derived CDs are prospective nanotheranostics that augment cancer targeting and imaging.

Removal of arsenic from jarosite waste using hydrometallurgical treatment.

The jarosite waste used during this study consists of minute amount of arsenic that has a potential to be leached into environment when kept in open area. This study tried to recover arsenic from jarosite waste using hydrometallurgical treatment. The comprehensive characterization of jarosite samples was performed using various analytical techniques, including X-ray diffraction (XRD), Fourier transform Infrared (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), and it was characterized as natrojarosite. For optimal removal of arsenic, the response surface methodology (RSM) was applied with the key factors, including dosage (A), time (B), temperature (C), and acid concentration (D) on the recovery of arsenic. The results indicated that the dosage (A) and acid concentration (D) demonstrated significant positive effects on arsenic recovery. As expected, the higher dosage and acid concentration was associated with increased recovery percentages for the arsenic from jarosite. Whereas time (B) and temperature (C) did not exhibit statistically significant recovery of arsenic within the specified experimental range. The contour plots showed the optimal operating conditions for the highest recovery percentage was approximately 52.61% when 2.5 g of jarosite was treated with 10 mol/L acid for 150 min at operating temperature of 80°. Although our study showed very moderate recovery of arsenic, it is first report where arsenic has been removed from jarosite waste. Readjustment of range of operating parameters would provide more insight into the further optimization of the yield.

Impact of textile dyes on human health and bioremediation of textile industry effluent using microorganisms: current status and future prospects.

Environmental contamination brought on by the discharge of wastewater from textile industries is a growing concern on a global scale. Textile industries produce a huge quantity of effluents containing a myriad of chemicals, mostly dyes. The discharge of such effluents into the aquatic environment results in pollution that adversely affects aquatic organisms. Synthetic dyes are complex aromatic chemical structures with carcinogenic and mutagenic properties in addition to high biological oxygen demand (BOD) and chemical oxygen demand (COD). This complex aromatic structure resists degradation by conventional techniques. The bioremediation approach is the biological clean-up of toxic contaminants from industrial effluents. Biological treatment methods produce less or no sludge and are cost-effective, efficient, and eco-friendly. Microorganisms, mostly microalgae and bacteria, and, in some instances, fungi, yeast, and enzymes decolorize textile dye compounds into simple, non-toxic chemical compounds. Following a thorough review of the literature, we are persuaded that microalgae and bacteria might be one of the potential decolorizing agents substituting for most other biological organisms in wastewater treatment. This article presents extensive literature information on textile dyes, their classification, the toxicity of dyes, and the bioremediation of toxic textile industry effluent utilizing microalgae and bacteria. Additionally, it combines data on factors influencing textile dye bioremediation, and a few suggestions for future research are proposed.

MXenes - Versatile 2D materials for identification of biomarkers and contaminants in large scale environments - A review.

Recent years have seen a lot of interest in transition metal carbides/carbonitrides (MXenes), Which is one of newly proliferating two-dimensional (2D) materials.The advantages and applications of synthesizing MXenes-based biosensing systems are interesting. There is an urgent requirement for synthesis of MXenes. Through foliation, physical adsorption, and interface modification,it has been proposed that many biological disorders are related to genetic mutation. Majority of mutations were discovered to be nucleotide mismatches. Consequently, accurate -nucleotide mismatched discrimination is crucial for both diagnosing and treating diseases. To differentiate between such a sensitivealterations in the DNA duplex, several detection methods, particularly Electrochemical-luminescence (ECL) ones, have really been investigated.Mn+1XnTx is common name for MXenes, a novel family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides, where T stands for interface termination units (i.e. = O, OH, and/or F). These electronic characteristics of MXenes may be changed between conductive to semiconducting due to abundant organometallic chemistry.Solid-state ECL sensors predicated on MXene would provide the facile nucleotide detection and convenience for usage with minimal training, mobility and possibly minimal cost.This study emphasizes upcoming requirements and possibilities in this area while describing the accomplishments achieved in the usage and employing of MXenes in the research and development of facile biomarkerdetection and their significance in designing electrochemical sensors. Opportunities are addressed for creating 2D MXene materials sensors and devices with incorporated biomolecule sensing. MXenes Carry out this process sensors, address the advantages of using MXenes and their variants as detecting materials for gathering different types of data, and attempt to clarify the design principles and operation of related MXene-based sensors, such as nucleotide detection, Single nucleotide detectors, Cancer theranostics, Biosensing capabilities, Gliotoxin detection, SARS-COV-2 nucleocapsid detection, electrochemical sensors, visual sensors, and humidity sensors. Finally, we examine the major issues and prospects for MXene-based materials used in various sensing applications.

Warhorses in soil bioremediation: Seed biopriming with PGPF secretome to phytostimulate crop health under heavy metal stress.

The fungal symbiosis with the plant root system is importantly recognized as a plant growth promoting fungi (PGPFs), as well as elicitor of plant defence against different biotic and abiotic stress conditions. Thus PGPFs are playing as a key trouper in enhancing agricultural quality and increased crop production and paving a way towards a sustainable agriculture. Due to increased demand of food production, the over and unscientific usage of chemical fertilizers has led to the contamination of soil by organic and inorganic wastes impacting on soil quality, crops quality effecting on export business of agricultural products. The application of microbial based consortium like plant growth promoting fungi is gaining worldwide importance due to their multidimensional activity. These activities are through plant growth promotion, induction of systemic resistance, disease combating and detoxification of organic and inorganic toxic chemicals, a heavy metal tolerance ability. The master key behind these properties exhibited by PGPFs are attributed towards various secretory biomolecules (secondary metabolites or enzymes or metabolites) secreted by the fungi during interaction mechanism. The present review is focused on the multidimensional role PGPFs as elicitors of Induced systemic resistance against phytopathogens as well as heavy metal detoxifier through seed biopriming and biofortification methods. The in-sights on PGPFs and their probable mechanistic nature contributing towards plants to withstand heavy metal stress and stress alleviation by activating of various stress regulatory pathways leading to secretion of low molecular weight compounds like organic compounds, glomalin, hydrophobins, etc,. Thus projecting the importance of PGPFs and further requirement of research in developing PGPFs based molecules and combining with trending Nano technological approaches for enhanced heavy metal stress alleviations in plant and soil as well as establishing a sustainable agriculture.

Bioremediation of organic pollutants: a mini review on current and critical strategies for wastewater treatment.

The release and prevalence of organic pollutants in an aqueous environment due to industrial discharges, agricultural operations, or inappropriate waste disposal is a huge threat to attaining sustainable development. As a result, wastewater treatment has attained a huge scope as it is evident from the number of articles published in recent years. Among the various techniques, bioremediation is one of the economical and eco-friendly means of wastewater treatment for the removal of organic pollutants. Microbial community and microalgae are the front runners of this process as they result in treated water and sludge or biomass formation. This mini review put forwards the types of organic pollutants and the bioremediation strategies using microbes and micro-algae, the role of genetically engineered microbes on the bio-remediation of organic pollutants and the recent applications of Artificial Intelligence (AI) techniques that have been implemented for improving the efficiency of the methods. The gap between practicability and applicability of the bioremediation process was also identified in this review. In addition, the economics and future research needs are discussed as outcomes.

A comprehensive review on strategic study of cellulase producing marine actinobacteria for biofuel applications.

Every year, 180 billion tonnes of cellulose are produced by plants as waste biomass after the cultivation of the desired product. One of the smart and effective ways to utilize this biomass rather than burn it is to utilize the biomass to adequately meet the energy needs with the help of microbial cellulase that can catalytically convert the cellulose into simple sugar units. Marine actinobacteria is one of the plentiful gram-positive bacteria known for its industrial application as it can produce multienzyme cellulase with high thermal tolerance, pH stability and high resistant towards metal ions and salt concentration, along with other antimicrobial properties. Highly stable cellulase obtained from marine actinobacteria will convert the cellulose biomass into glucose, which is the precursor for biofuel production. This review will provide a comprehensive outlook of various strategic applications of cellulase from marine actinobacteria which can facilitate the breakdown of lignocellulosic biomass to bioenergy with respect to its characteristics based on the location/environment that the organism was collected and its screening strategies followed by adopted methodologies to mine the novel cellulase genome and enhance the production, thereby increasing the activity of cellulase continued by effective immobilization on novel substrates for the multiple usage of cellulase along with the industrial applications.

Emerging contaminants of high concern for the environment: Current trends and future research.

Wastewater is contaminated water that must be treated before it may be transferred into other rivers and lakes in order to prevent further groundwater pollution. Over the last decade, research has been conducted on a wide variety of contaminants, but the emerging contaminants are those caused primarily by micropollutants, endocrine disruptors (EDs), pesticides, pharmaceuticals, hormones, and toxins, as well as industrially-related synthetic dyes and dye-containing hazardous pollutants. Most emerging pollutants did not have established guidelines, but even at low concentrations they could have harmful effects on humans and aquatic organisms. In order to combat the above ecological threats, huge efforts have been done with a view to boosting the effectiveness of remediation procedures or developing new techniques for the detection, quantification and efficiency of the samples. The increase of interest in biotechnology and environmental engineering gives an opportunity for the development of more innovative ways to water treatment remediation. The purpose of this article is to provide an overview of emerging sources of contaminants, detection technologies, and treatment strategies. The goal of this review is to evaluate adsorption as a method for treating emerging pollutants, as well as sophisticated and cost-effective approaches for treating emerging contaminants.

Graphene materials: Armor against nosocomial infections and biofilm formation - A review.

Graphene has revolutionized the field of energy and storage sectors. Out of the total number of nosocomial infections diagnosed all around the world, the majority of the cases (around 70%) are found to be due to the medical device or assistance utilized while treating the patient. Combating these diseases is vital as they cause a nuisance to the patients and medical practitioners. Coatings of graphene and its derivatives hold the key to the formation of special surfaces that can rupture microbial cells using their sharp edges, ultimately leading to nuclear and cellular fragmentation. Their incorporation as a whole or as a part in the hospital apparel and the medical device has aided medical practitioners to combat many nosocomial diseases. Graphene is found to be highly virulent with broad-spectrum antimicrobial activity against nosocomial strains and biofilm formation. Their alternate mode of action like trapping and charge transfer has also been discussed well in the present review. The various combinational forms of graphene with its conjugates as a suitable agent to combat nosocomial infections and a potential coating for newer challenges like COVID-19 infections has also been assessed in the current study. Efficiency of graphene sheets has been found to be around 89% with a reaction time as less as 3 h. Polymers with graphene seem to have a higher potency against biofilm formation. When combined with graphene oxide, silver nanoparticles provide 99% activity against nosocomial pathogens. In conclusion, this review would be a guiding light for scientists working with graphene-based coatings to unfold the potentials of this marvelous commodity to tackle the present and future pandemics to come.

Carbon-based adsorbents as proficient tools for the removal of heavy metals from aqueous solution: A state of art-review emphasizing recent progress and prospects.

Carbon-centric adsorbents (CCA) are diverse forms, from simple biochar (BC) to graphene derivatives, carbon nanotubes (CNTs), and activated carbon (AC), which have been vastly explored for their removal of a plethora of pollutants, including heavy metals (HM). The prominent features of CCA are their operational attributes like extensive surface area, the occurrence of flexible surface functional groups, etc. This work offers a comprehensive examination of contemporary research on CCA for their superior metal removal aptitude and performances in simulated solutions and wastewater flows; via portraying the recent research advances as an outlook on the appliances of CACs for heavy metal adsorption for removal via distinct forms like AC, BC, Graphene oxide (GO), and CNTs. The bibliometric analysis tool was employed to highlight the number of documents, country-wise contribution, and co-occurrence mapping based on the Scopus database. The coverage of research works in this review is limited to the last 5 years (2017-2021) to highlight recent progress and prospects in using CCAs such as AC, BC, GO, and CNTs to remove HM from aqueous media, which makes the review unique. Besides an overview of the common mechanisms of CACs, the future scope of CAC, especially towards HM mitigation, is also discussed in this review. This review endorses that further efforts should be commenced to enhance the repertory of CCAs that effectively eliminate multiple targeted metals in both simulated and real wastewater.

Novel mechanism and degradation kinetics of pesticides mixture using Bacillus sp. strain 3C in contaminated sites.

The present study has investigated the potential of Bacillus sp. strain 3C able to degrade mixture of pesticides from the environment. It showed maximum tolerance up to 450 mg·L-1 for cypermethrin, fipronil, imidacloprid and sulfosulfuron. The strain 3C was able to degrade up to the 94% of mixture of pesticides (20 mg·L-1) within 15 days of experiment. The Box-Behnken design of Response Surface Methodology (RSM) determined the optimized conditions as; inoculum size 3.0 × 107 CFU·mL-1, shaking speed 120 rpm, and pesticides concentration 80 mg·L-1. In soil-based bioremediation with strain 3C after 15 days degradation pattern was; 99, 94, 92, 92 and 7% for the imidacloprid, sulfosulfuron, fipronil, cypermethrin and control respectively. The novel intermediate metabolites for cypermethrin degradation were investigated as decyl isobutyl ester, phthalic acid, cyclopropane carboxylic acid tri dec-2-ynyl ester, 9- octadecanal, tridecane, propanoic acid, cyclohexene, bicyclo[2.2.1] heptan-2-ol, and acetic acid were identified using Gas chromatography Mass Spectrometry (GC-MS) with strain 3C. Moreover, the results of the laccase based enzymatic kinetics suggested that the rate of production was maximum in pesticides stress (94 µg·µL-1) whereas, in normal condition 51 µg·µL-1. The Km value found to be decreased in pesticides stress condition 12.25 and increment in Km 13.58 mM was observed without stress. Furthermore, aldehyde dehydrogenase (ALDH) and laccase encoding genes were amplified and linked with mixture of pesticides bioremediation. The efficiency of bacterial strain 3C, could be used for bioremediation of mixture of pesticides, and other xenobiotic compounds from the contaminated environments.

Regulatory and innovative mechanisms of bacterial quorum sensing-mediated pathogenicity: a review.

Quorum sensing (QS) is a system of bacteria in which cells communicate with each other; it is linked to cell density in the microbiome. The high-density colony population can provide enough small molecular signals to enable a range of cellular activities, gene expression, pathogenicity, and antibiotic resistance that cause damage to the hosts. QS is the basis of chronic illnesses in human due to microbial sporulation, expression of virulence factors, biofilm formation, secretion of enzymes, or production of membrane vesicles. The transfer of antimicrobial resistance gene (ARG) among antibiotic resistance bacteria is a major public health concern. QS-mediated biofilm is a hub for ARG horizontal gene transfer. To develop innovative approach to prevent microbial pathogenesis, it is essential to understand the role of QS especially in response to environmental stressors such as exposure to antibiotics. This review provides the latest knowledge on the relationship of QS and pathogenicity and explore the novel approach to control QS via quorum quenching (QQ) using QS inhibitors (QSIs) and QQ enzymes. The state-of-the art knowledge on the role of QS and the potential of using QQ will help to overcome the threats of rapidly emerging bacterial pathogenesis.

Antifungal activity and molecular docking of phenol, 2,4-bis(1,1-dimethylethyl) produced by plant growth-promoting actinobacterium Kutzneria sp. strain TSII from mangrove sediments.

The present study reveals the plant growth-promoting (PGP) potentials and characterizes the antifungal metabolites of Kutzneria sp. strain TSII isolated from mangrove sediment soil through in vitro and in silico studies. In this study, Kutzneria sp. strain TSII was screened for PGP activities and the antifungal activities against Pithomyces atro-olivaceous, a leaf spot-associated pathogen in groundnut plants. The ethyl acetate extract of Kutzneria sp. strain TSII was purified using column chromatography, and the presence of various antimicrobial compounds was studied by gas chromatography-mass spectrometry (GC-MS) analysis. In silico modeling and docking were carried out to evaluate the antifungal potent of bioactive compound. Kutzneria sp. strain TSII produced proteases, phosphatases, ammonia, siderophores, cellulases, indole acetic acid (IAA), lipases, and amylases, indicating its ability to enhance the growth of plants. The ethyl acetate extract of Kutzneria sp strain TSII was found to be a potent inhibitor of fungal mycelial growth in the potato dextrose agar (PDA) plates. The GC-MS spectral study showed 24 antimicrobial compounds belonging to five chemical groups: phenolics, phthalates, fatty acid methyl esters (FAME), spiro, and fatty alcohols. In silico docking studies showed that phenol, 2,4-bis(1,1-dimethylethyl)-effectively attaches with the active site of mitochondrial F1F0 Adenosine triphosphate synthase enzymes of Pithomyces atro-olivaceous. Hence, it is clear that these antifungal compounds shall be formulated shortly to treat many plant fungal diseases in an eco-friendly manner.

Biologically reduced graphene oxide as a green and easily available photocatalyst for degradation of organic dyes.

The disposal of untreated textile industrial wastewater having unmanageable pollutants is a global issue. Eco-friendly remediation technology is needed for the removal of environmental contaminants. In this study, a simple hydrothermal method is adapted to synthesis reduced graphene oxide (PErGO) using Phyllanthus emblica fruits extract and used as a photocatalyst for the degradation of synthetic toxic dyes. The physicochemical properties of green synthesized PErGO are confirmed using UV-Vis spectroscopy, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction. The ID/IG ratio is found as 1.02 for GO which is improved to 1.15 for PErGO, which confirms the existence of unrepaired defects after the elimination of negatively charged O2 moieties from the surface of GO. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis show well-exploited PErGO morphology. The photocatalytic removal of methylene blue (MB) and methyl orange (MO) dyes is confirmed using UV-vis spectrophotometer. PErGO shows about 92% of MO and 91% of MB degradation within 90 min of sunlight exposure while carried out as a mixed dye degradation. The sustainability of this catalyst is confirmed by testing it for five subsequent degradation cycles and noticed a stable and significant degradation activity. Outcomes from this study suggest that eco-friendly PErGO can be used as an alternate sustainable material to treat a large volume of wastewater from various dye industries.

Mitigation of organophosphorus insecticides from environment: Residual detoxification by bioweapon catalytic scavengers.

Organophosphorus insecticides (OPIs) have low persistence and are easily biodegradable in nature. The United States and India are the major countries producing OPIs of about 25% and 17% of the world, respectively. OPIs commonly used for agricultural practices occupy a major share in the global market, which leads to the increasing contamination of OPIs residues in various food chains. To overcome this issue, an enzymatic degradation method has been approved by several environmental toxic, and controlling agencies, including United States Environmental Protection Agency (USEPA). Different catalytic enzymes have been isolated and identified from various microbial sources to neutralize the toxic pesticides and/or insecticides. In this review, we have gathered information on OPIs biotransformation and their residual toxicity in the environment. Particularly, it focuses on OPIs degrading enzymes such as chlorpyrifos hydrolase, diisopropylfluorophosphatase, organophosphate acid anhydrolase, organophosphate hydrolases, and phosphotriesterases like lactonasesspecific activity either P-O link group type or P-S link group of pesticides. To summarize, the catalytic degradation of organophosphorus insecticides is not only profitable but also environmentally friendly. Hence, the enzymatic catalyst is an ultimate and super bio-weapon to mitigate or decontaminate various OPIs residues in both terrestrial and aqueous environments.

A sustainable green synthesis of functionalized biocompatible carbon quantum dots from Aloe barbadensis Miller and its multifunctional applications.

Herein, we demonstrated a sustainable green approach for the preparation of fluorescent biocompatible carbon quantum dots by microwave-assisted reflux synthesis from Aloe barbadensis Miller (Aloe vera) extract. The Transmission Electron Microscopic images reveal that the as-prepared CQDs are spherical with less than 5 nm in size. The CQDs are amorphous, showed an excitation-independent behaviour, emitted blue fluorescence and have a fluorescence quantum yield of 31%. The presence of -OH groups contributed to the blue emission and helped CQDs to disperse uniformly in an aqueous solution. The prepared CQDs were employed as a photocatalyst for the environmental remediation to degrade the anionic dye, eosin yellow under visible light irradiation. The results showed that the CQDs exhibited excellent photocatalytic efficiency of 98.55% within 80 min and a 100% efficiency within 100 min. Further, the cytotoxic properties of as-prepared CQDs are investigated in the MCF-7 breast cancer cell line using MTT assay. The results demonstrated a notable reduction in cell viability in a dose-subjected manner, and the cell viability decreased to 50% (IC50) at a concentration of 52.2 ± 1.35 µg/mL. Furthermore, cellular internalization of CQDs in breast cancer cells is studied. As expected, CQDs are found to internalize by the cancer cells with blue emission as revealed by fluorescence microscope. In the end, CQDs in human breast cancer cells demonstrate the anti-proliferative effect and are found to be an impressive fluorescent probe for live-cell imaging, paving a path for its potential biomedical applications.

Green biomimetic silver nanoparticles utilizing the red algae Amphiroa rigida and its potent antibacterial, cytotoxicity and larvicidal efficiency.

The present investigation reports a simple, rapid, inexpensive, and eco-friendly approach for synthesizing Amphiroa rigida-mediated silver nanoparticles (AR-AgNPs) for the first time. The biomimetic synthesized AR-AgNPs were characterized by both spectral and microscopic analysis. The UV-visible spectrum showed the surface plasmon peak at 420 nm, which indicated the formation of AR-AgNPs. X-ray diffraction characterization of AR-AgNPs showed a face-centered cubic crystal (25 nm) and the transmission electron microscope micrograph showed spherical shape. The functional group of polysaccharide that plays a major role as a stabilizing and reducing agent is confirmed by Fourier-transform infrared spectroscopy. The biomimetic synthesized AR-AgNPs showed antibacterial activity against Staphylococcus aureus (21 ± 0.2 mm) and Pseudomonas aeruginosa (15 ± 0.2 mm). Further, the cytotoxic effects of AR-AgNPs against MCF-7 human breast cancer cells were observed through acridine orange-ethidium bromide and Hoechst staining. Besides, AR-AgNPs are found to be inhibit the growth of 3rd and 4th instar larvae of Aedes aegypti in a dose-dependent manner.

Bacillus megaterium-induced biocorrosion on mild steel and the effect of Artemisia pallens methanolic extract as a natural corrosion inhibitor.

Methanolic extract of Artemisia pallens (MEAP) (Asteraceae) was explored as greenbiocorrosion inhibitor for mild steel 1010 in 1.5% sodium chloride environment. Bacillus megaterium SKR7 induces the development of biofilm on the metal surface and forms the pitting corrosion. MEAP was showed (25 ppm) optimum inhibition effect of biocorrosion and further corrosion rate was highly reduced (0.3335 mm/year) than the control system (0.009 mm/year). The electrochemical study has supported the results with a higher value of total resistance (34 Ω cm2) when compared to control systems. It reveals the formation of a protective layer on the metal surface and reduces the adsorption of biofilm. This was due to the antimicrobial effect of MEAP. Overall, the results recognized that MEAP used as a green corrosion inhibitor for MS 1010 with 83% inhibition efficiency.