Upcycling Waste Streams from a Biorefinery Process-A Case Study on Cadmium and Lead Biosorption by Two Types of Biopolymer Post-Extraction Biomass.

This study investigated the possibility of using the spent kind of biomass of Pseudomonas putida CA-3 and Zobelella denitrificans MW1 obtained after the pilot-scale production of polyhydroxyalkanoates (PHAs) as a biosorbent for the bioremediation of aqueous solutions containing toxic cadmium and lead ions. The material was characterized by means of scanning electron microscopy, Fourier-transformed infrared spectroscopy, nuclear magnetic resonance spectroscopy and amino acid profiling. To check the sorption capacity of spent biomass against Pb and Cd ions, equilibrium studies were performed. To learn about the nature of the sorption process, kinetic modelling was carried out and the obtained results showed that the adsorption process is best described by the pseudo-second-order kinetic model (PSO), which suggests that the sorption process is connected with the chemical bonding of the ions on the sorbent surface. Information provided by the amino acid profile made it possible to predict the adsorption mechanism and FTIR analysis proved the participation of different chemical groups in the removal process. According to the equilibrium studies, the best-fitted isotherm was the Freundlich model for all used materials and metal ions considering the correlation coefficient. Summarizing the results, the spent biomass after the PHA production is an effective biosorbent and can be reused for heavy metal bioremediation.

Study on ßTCP/P(3HB) Scaffolds-Physicochemical Properties and Biological Performance in Low Oxygen Concentration.

The search for new materials for bone regenerative purposes is still ongoing. Therefore, we present a series of newly constructed composites based on ß tricalcium phosphate (ßTCP) and poly(3-hydroxybutyrate) bacteria-derived biopolymer (P(3HB)) in the form of 3D scaffolds with different pore sizes. To improve the polymer attachment to the ßTCP surface, the etching of ceramic sinters, using citric acid, was applied. As expected, pre-treatment led to the increase in surface roughness and the creation of micropores facilitating polymer adhesion. In this way, the durability and compressive strength of the ceramic-polymer scaffolds were enhanced. It was confirmed that P(3HB) degrades to 3-hydroxybutyric acid, which broadens applications of developed materials in bone tissue engineering as this compound can potentially nourish surrounding tissues and reduce osteoporosis. Moreover, to the best of our knowledge, it is one of the first studies where the impact of ßTCP/P(3HB) scaffolds on mesenchymal stem cells (MSCs), cultured in lowered (5%) oxygen concentration, was assessed. It was decided to use a 5% oxygen concentration in the culture to mimic the conditions that would be found in damaged bone in a living organism during regeneration. Scaffolds enabled cell migration and sufficient flow of the culture medium, ensuring high cell viability. Furthermore, in composites with etched ßTCP, the MSCs adhesion was facilitated by hydrophilic ceramic protrusions which reduced hydrophobicity. The developed materials are potential candidates for bone tissue regeneration. Nevertheless, to confirm this hypothesis, in vivo studies should be performed.

The Influence of Novel, Biocompatible, and Bioresorbable Poly(3-hydroxyoctanoate) Dressings on Wound Healing in Mice.

The human body's natural protective barrier, the skin, is exposed daily to minor or major mechanical trauma, which can compromise its integrity. Therefore, the search for new dressing materials that can offer new functionalisation is fully justified. In this work, the development of two new types of dressings based on poly(3-hydroxyoctanoate) (P(3HO)) is presented. One of the groups was supplemented with conjugates of an anti-inflammatory substance (diclofenac) that was covalently linked to oligomers of hydroxycarboxylic acids (Oli-dicP(3HO)). The novel dressings were prepared using the solvent casting/particulate leaching technique. To our knowledge, this is the first paper in which P(3HO)-based dressings were used in mice wound treatment. The results of our research confirm that dressings based on P(3HO) are safe, do not induce an inflammatory response, reduce the expression of pro-inflammatory cytokines, provide adequate wound moisture, support angiogenesis, and, thanks to their hydrophobic characteristics, provide an ideal protective barrier. Newly designed dressings containing Oli-dicP(3HO) can promote tissue regeneration by partially reducing the inflammation at the injury site. To conclude, the presented materials might be potential candidates as excellent dressings for wound treatment.

Polyhydroxyalkanoates, bacterially synthesized polymers, as a source of chemical compounds for the synthesis of advanced materials and bioactive molecules.

Research into polyhydroxyalkanoates (PHAs) is growing exponentially. These bacterially derived polyesters offer a spectrum of possible applications, such as in manufacturing of daily-use objects, production of medical devices and implantable objects, or as synthons in chemical and pharmaceutical industries. Thanks to their broad physicochemical features, PHAs can be seen as polymers of the future, which can replace traditional petrochemical equivalents. As they are synthesized by bacteria through fermentation processes, these polyesters can be obtained from virtually any carbon source in a sustainable manner. Characterized by biodegradability and biocompatibility, they are used in many industries, ranging from production of everyday objects to medical applications. Furthermore, as they are built from bioactive monomers, namely (R)-3-hydroxyacids, they provide a platform for the synthesis of advanced chemical compounds. In this mini review, the reader will be acquainted with recent studies conducted at the Jerzy Haber Institute of Catalysis and Surface Chemistry of the Polish Academy of Sciences in collaboration with other groups that have contributed to the development of PHA-based medical materials, bioactive molecules and novel green solvents derived from PHA monomers.Key points• Polyhydroxyalkanoates are emerging polymers for biomedical applications• Polyhydroxyalkanoates can be modified easily to provide novel materials• (R)-3-Hydroxyacids are good synthons for bioactive substances and green solvents.

Vimentin Cytoskeleton Architecture Analysis on Polylactide and Polyhydroxyoctanoate Substrates for Cell Culturing.

Polylactide (PLA), widely used in bioengineering and medicine, gained popularity due to its biocompatibility and biodegradability. Natural origin and eco-friendly background encourage the search of novel materials with such features, such as polyhydroxyoctanoate (P(3HO)), a polyester of bacterial origin. Physicochemical features of both P(3HO) and PLA have an impact on cellular response 32, i.e., adhesion, migration, and cell morphology, based on the signaling and changes in the architecture of the three cytoskeletal networks: microfilaments (F-actin), microtubules, and intermediate filaments (IF). To investigate the role of IF in the cellular response to the substrate, we focused on vimentin intermediate filaments (VIFs), present in mouse embryonic fibroblast cells (MEF). VIFs maintain cell integrity and protect it from external mechanical stress, and also take part in the transmission of signals from the exterior of the cell to its inner organelles, which is under constant investigation. Physiochemical properties of a substrate have an impact on cells' morphology, and thus on cytoskeleton network signaling and assembly. In this work, we show how PLA and P(3HO) crystallinity and hydrophilicity influence VIFs, and we identify that two different types of vimentin cytoskeleton architecture: network "classic" and "nutshell-like" are expressed by MEFs in different numbers of cells depending on substrate features.

In Search of Effective Anticancer Agents-Novel Sugar Esters Based on Polyhydroxyalkanoate Monomers.

Cancer is one of the deadliest illness globally. Searching for new solutions in cancer treatments is essential because commonly used mixed, targeted and personalized therapies are sometimes not sufficient or are too expensive for common patients. Sugar fatty acid esters (SFAEs) are already well-known as promising candidates for an alternative medical tool. The manuscript brings the reader closer to methods of obtaining various SFAEs using combined biological, chemical and enzymatic methods. It presents how modification of SFAE's hydrophobic chains can influence their cytotoxicity against human skin melanoma and prostate cancer cell lines. The compound's cytotoxicity was determined by an MTT assay, which followed an assessment of SFAEs' potential metastatic properties in concentrations below IC50 values. Despite relatively high IC50 values (63.3-1737.6 µM) of the newly synthesized SFAE, they can compete with other sugar esters already described in the literature. The chosen bioactives caused low polymerization of microtubules and the depolymerization of actin filaments in nontoxic levels, which suggest an apoptotic rather than metastatic process. Altogether, cancer cells showed no propensity for metastasis after treating them with SFAE. They confirmed that lactose-based compounds seem the most promising surfactants among tested sugar esters. This manuscript creates a benchmark for creation of novel anticancer agents based on 3-hydroxylated fatty acids of bacterial origin.

How much of antibiotics can enter surface water with treated wastewater and how it affects the resistance of waterborne bacteria: A case study of the Bialka river sewage treatment plant.

This study aimed to gain insight into the presence of antibiotics, occurrence of antimicrobial resistance and prevalence of extended-spectrum ß-lactamase (ESBL) genes in Escherichia coli in surface water, based on the example of the Bialka river, located in one of the most attractive tourist destinations in Poland. Water samples were collected in three sites: in the Tatra National Park (TNP), by the sewage discharge from the local treatment plant (STP) and c.a. 3 km downstream (DSTP). The analyses included determination of antibiotic content, enumeration of bacterial indicators of poor water quality, isolation and identification of Escherichia coli, which was subjected to antimicrobial susceptibility tests and assessment of ESBL-determining genes. Fourteen antimicrobials out of 24 tested were detected in river waters in varying concentrations. Trimethoprim and ofloxacin were most frequently detected. Most antibiotics were absent in the TNP, the highest numbers and the highest concentrations of antibiotics were observed by the STP discharge to decrease their content downstream. Culture-based tests of microbiological contamination showed similar results. Resistance to ampicillin was most frequent (64.5% strains), followed by cefazolin (50%). 20.6% of strains were ESBL-positive, while ESBL-determining gene, blaTEM was detected in 23.8% of E. coli strains. The largest percentage of antibiotic resistant and MDR E. coli strains was detected nearby the STP, indicating that malfunctioning STP may contribute largely to river water contamination downstream, also having significant environmental and economic impact.

Vimentin Association with Nuclear Grooves in Normal MEF 3T3 Cells.

Vimentin, an intermediate filament protein present in leukocytes, blood vessel endothelial cells, and multiple mesenchymal cells, such as mouse embryonic fibroblasts (MEF 3T3), is crucial for various cellular processes, as well as for maintaining the integrity and durability (stability) of the cell cytoskeleton. Vimentin intermediate filaments (VIFs) adhere tightly to the nucleus and spread to the lamellipodium and tail of the cell, serving as a connector between the nucleus, and the cell's edges, especially in terms of transferring mechanical signals throughout the cell. How these signals are transmitted exactly remains under investigation. In the presented work, we propose that vimentin is involved in that transition by influencing the shape of the nucleus through the formation of nuclear blebs and grooves, as demonstrated by microscopic observations of healthy MEF (3T3) cells. Grooved, or "coffee beans" nuclei, have, to date, been noticed in several healthy cells; however, these structures are especially frequent in cancer cells-they serve as a significant marker for recognition of multiple cancers. We observed 288 MEF3T3 cells cultured on polyhydroxyoctanoate (PHO), polylactide (PLA), and glass, and we identified grooves, coaligned with vimentin fibers in the nuclei of 47% of cells cultured on PHO, 50% of cells on glass, and 59% of cells growing on PLA. We also observed nuclear blebs and associated their occurrence with the type of substrate used for cell culture. We propose that the higher rate of blebs in the nuclei of cells, cultured on PLA, is related to the microenvironmental features of the substrate, pH in particular.

Physicochemical and Biological Characterisation of Diclofenac Oligomeric Poly(3-hydroxyoctanoate) Hybrids as ß-TCP Ceramics Modifiers for Bone Tissue Regeneration.

Nowadays, regenerative medicine faces a major challenge in providing new, functional materials that will meet the characteristics desired to replenish and grow new tissue. Therefore, this study presents new ceramic-polymer composites in which the matrix consists of tricalcium phosphates covered with blends containing a chemically bounded diclofenac with the biocompatible polymer-poly(3-hydroxyoctanoate), P(3HO). Modification of P(3HO) oligomers was confirmed by NMR, IR and XPS. Moreover, obtained oligomers and their blends were subjected to an in-depth characterisation using GPC, TGA, DSC and AFM. Furthermore, we demonstrate that the hydrophobicity and surface free energy values of blends decreased with the amount of diclofenac modified oligomers. Subsequently, the designed composites were used as a substrate for growth of the pre-osteoblast cell line (MC3T3-E1). An in vitro biocompatibility study showed that the composite with the lowest concentration of the proposed drug is within the range assumed to be non-toxic (viability above 70%). Cell proliferation was visualised using the SEM method, whereas the observation of cell penetration into the scaffold was carried out by confocal microscopy. Thus, it can be an ideal new functional bone tissue substitute, allowing not only the regeneration and restoration of the defect but also inhibiting the development of chronic inflammation.

Cellular architecture and migration behavior of fibroblast cells on polyhydroxyoctanoate (PHO): A natural polymer of bacterial origin.

Biodegradable and biocompatible novel materials of natural origin are gaining more and more attention in recent years. These so called biopolymers, characterized by their biointegrity and biocompatibility, find completely new and promising applications in biomedical sciences. The presented work focuses on the medium chain length elastomeric polyhydroxyalkanoate biopolymer-polyhydroxyoctanoate (PHO). This biopolymer is fully biodegradable without formation of harmful byproducts.We investigated PHO's physical properties with nanoindentation technique and scratch testing to determine Young's modulus and friction coefficient. Further, the work focused on the impact of PHO, used as growth substrate, on the physiology and morphology of mouse embryonic fibroblast cells (MEF 3T3). Application of fluorescent staining protocols and advanced microscopic techniques allowed to study the morphological changes in the cytoskeletons of cells grown on PHO and also gave an insight into their migration strategies on the polymer surface. We found that PHO exhibits no cellular cytotoxicity, similarly to a glass substrate. MEF cells spread better on glass surface than on each tested PHO substrate though there was almost no difference between PHO substrates cast from different solvents. However, a detailed analysis of actin and microtubule cytoskeletal architecture reveals changes in the density of actin and microtubular networks. Migration of MEF cells on PHO substrates was slower than on the glass substrate. To elucidate the molecular mechanisms of observed changes in cytoskeletal architecture and migration parameters can be of special interest for future medical application of PHO polymer.

Hollow silica microspheres as robust immobilization carriers.

Hollow silica microspheres provide an ideal solid support for enzyme immobilization. We tested one of the newest development, namely MATSPHERES®, a silica openwork material as a carrier for the covalent immobilization of enzymes used to synthesize bioactive compounds. Two model enzymes - ethylbenzene dehydrogenase and EL070 lipase - were considered. They belong to two different enzyme classes and catalyse reactions taking place in various environments (aqueous and non-aqueous, aerobic and anaerobic). The enzymes were immobilized by covalent bonds (via divinyl sulfone and glutaraldehyde) on new silica material. Effectiveness of immobilization processes on the spheres grafted with amine groups and on the analogues without functionalization was determined for both enzymes. Microspheres were characterized morphologically and also their mechanical stability was examined during exposure to varying physical conditions. It was shown that MATSPHERES® due to their openwork structure and relative stability under batch and flow conditions can be a competitive SBA support for enzyme immobilization and production of bioactive compounds.

Lactose esters: synthesis and biotechnological applications.

Biodegradable nonionic sugar esters-based surfactants have been gaining more and more attention in recent years due to their chemical plasticity that enables the various applications of these molecules. In this review, various synthesis methods and biotechnological implications of lactose esters (LEs) uses are considered. Several chemical and enzymatic approaches are described for the synthesis of LEs, together with their applications, i.e. function in detergents formulation and as additives that not only stabilize food products but also protect food from undesired microbial contamination. Further, this article discusses medical applications of LEs in cancer treatment, especially their uses as biosensors, halogenated anticancer drugs, and photosensitizing agents for photodynamic therapy of cancer and photodynamic inactivation of microorganisms.

Polyhydroxyalkanoate-based 3-hydroxyoctanoic acid and its derivatives as a platform of bioactive compounds.

A library of 18 different compounds was synthesized starting from (R)-3-hydroxyoctanoic acid which is derived from the bacterial polymer polyhydroxyalkanoate (PHA). Ten derivatives, including halo and unsaturated methyl and benzyl esters, were synthesized and characterized for the first time. Given that (R)-3-hydroxyalkanoic acids are known to have biological activity, the new compounds were evaluated for antimicrobial activity and in vitro antiproliferative effect with mammalian cell lines. The presence of the carboxylic group was essential for the antimicrobial activity, with minimal inhibitory concentrations against a panel of bacteria (Gram-positive and Gram-negative) and fungi (Candida albicans and Microsporum gypseum) in the range 2.8-7.0 mM and 0.1-6.3 mM, respectively. 3-Halogenated octanoic acids exhibited the ability to inhibit C. albicans hyphae formation. In addition, (R)-3-hydroxyoctanoic and (E)-oct-2-enoic acids inhibited quorum sensing-regulated pyocyanin production in the opportunistic pathogen Pseudomonas aeruginosa PAO1. Generally, derivatives did not inhibit mammalian cell proliferation even at 3-mM concentrations, while only (E)-oct-2-enoic and 3-oxooctanoic acid had IC50 values of 1.7 and 1.6 mM with the human lung fibroblast cell line.

High cell density cultivation of Pseudomonas putida KT2440 using glucose without the need for oxygen enriched air supply.

High Cell Density (HCD) cultivation of bacteria is essential for the majority of industrial processes to achieve high volumetric productivity (g L(-1) h(-1) ) of a bioproduct of interest. This study developed a fed batch bioprocess using glucose as sole carbon and energy source for the HCD of the well described biocatalyst Pseudomonas putida KT2440 without the supply of oxygen enriched air. Growth kinetics data from batch fermentations were used for building a bioprocess model and designing feeding strategies. An exponential followed by linearly increasing feeding strategy of glucose was found to be effective in maintaining biomass productivity while also delaying the onset of dissolved oxygen (supplied via compressed air) limitation. A final cell dry weight (CDW) of 102 g L(-1) was achieved in 33 h with a biomass productivity of 3.1 g L(-1) h(-1) which are the highest ever reported values for P. putida strains using glucose without the supply of pure oxygen or oxygen enriched air. The usefulness of the biomass as a biocatalyst was demonstrated through the production of the biodegradable polymer polyhydroxyalkanoate (PHA). When nonanoic acid (NA) was supplied to the glucose grown cells of P. putida KT2440, it accumulated 32% of CDW as PHA in 11 h (2.85 g L(-1) h(-1) ) resulting in a total of 0.56 kg of PHA in 18 L with a yield of 0.56 g PHA g NA(-1) .

Identification and characterization of an acyl-CoA dehydrogenase from Pseudomonas putida KT2440 that shows preference towards medium to long chain length fatty acids.

Diverse and elaborate pathways for nutrient utilization, as well as mechanisms to combat unfavourable nutrient conditions make Pseudomonas putida KT2440 a versatile micro-organism able to occupy a range of ecological niches. The fatty acid degradation pathway of P. putida is complex and correlated with biopolymer medium chain length polyhydroxyalkanoate (mcl-PHA) biosynthesis. Little is known about the second step of fatty acid degradation (ß-oxidation) in this strain. In silico analysis of its genome sequence revealed 21 putative acyl-CoA dehydrogenases (ACADs), four of which were functionally characterized through mutagenesis studies. Four mutants with insertionally inactivated ACADs (PP_1893, PP_2039, PP_2048 and PP_2437) grew and accumulated mcl-PHA on a range of fatty acids as the sole source of carbon and energy. Their ability to grow and accumulate biopolymer was differentially negatively affected on various fatty acids, in comparison to the wild-type strain. Inactive PP_2437 exhibited a pattern of reduced growth and PHA accumulation when fatty acids with lengths of 10 to 14 carbon chains were used as substrates. Recombinant expression and biochemical characterization of the purified protein allowed functional annotation in P. putida KT2440 as an ACAD showing clear preference for dodecanoyl-CoA ester as a substrate and optimum activity at 30 °C and pH 6.5-7.

Fed-batch strategies using butyrate for high cell density cultivation of Pseudomonas putida and its use as a biocatalyst.

A mathematically based fed-batch bioprocess demonstrated the suitability of using a relatively cheap and renewable substrate (butyric acid) for Pseudomonas putida CA-3 high cell density cultivation. Butyric acid fine-tuned addition is critical to extend the fermentation run and avoid oxygen consumption while maximising the biomass volumetric productivity. A conservative submaximal growth rate (µ of 0.25 h(-1)) achieved 71.3 g L(-1) of biomass after 42 h of fed-batch growth. When a more ambitious feed rate was supplied in order to match a µ of 0.35 h(-1), the volumetric productivity was increased to 2.0 g L(-1) h(-1), corresponding to a run of 25 h and 50 g L(-1) of biomass. Both results represent the highest biomass and the best biomass volumetric productivity with butyrate as a sole carbon source. However, medium chain length polyhydroxyalkanoate (mcl-PHA) accumulation with butyrate grown cells is low (4 %). To achieve a higher mcl-PHA volumetric productivity, decanoate was supplied to butyrate grown cells. This strategy resulted in a PHA volumetric productivity of 4.57 g L(-1) h(-1) in the PHA production phase and 1.63 g L(-1) h(-1)over the lifetime of the fermentation, with a maximum mcl-PHA accumulation of 65 % of the cell dry weight.

Conversion of post consumer polyethylene to the biodegradable polymer polyhydroxyalkanoate.

A process for the conversion of post consumer (agricultural) polyethylene (PE) waste to the biodegradable polymer medium chain length polyhydroxyalkanoate (mcl-PHA) is reported here. The thermal treatment of PE in the absence of air (pyrolysis) generated a complex mixture of low molecular weight paraffins with carbon chain lengths from C8 to C32 (PE pyrolysis wax). Several bacterial strains were able to grow and produce PHA from this PE pyrolysis wax. The addition of biosurfactant (rhamnolipids) allowed for greater bacterial growth and PHA accumulation of the tested strains. Some strains were only capable of growth and PHA accumulation in the presence of the biosurfactant. Pseudomonas aeruginosa PAO-1 accumulated the highest level of PHA with almost 25 % of the cell dry weight as PHA when supplied with the PE pyrolysis wax in the presence of rhamnolipids. The change of nitrogen source from ammonium chloride to ammonium nitrate resulted in faster bacterial growth and the earlier onset of PHA accumulation. To our knowledge, this is the first report where PE is used as a starting material for production of a biodegradable polymer.

Medium chain length polyhydroxyalkanoate (mcl-PHA) production from volatile fatty acids derived from the anaerobic digestion of grass.

A two step biological process for the conversion of grass biomass to the biodegradable polymer medium chain length polyhydroxyalkanoate (mcl-PHA) was achieved through the use of anaerobic and aerobic microbial processes. Anaerobic digestion (mixed culture) of ensiled grass was achieved with a recirculated leach bed bioreactor resulting in the production of a leachate, containing 15.3 g/l of volatile fatty acids (VFAs) ranging from acetic to valeric acid with butyric acid predominating (12.8 g/l). The VFA mixture was concentrated to 732.5 g/l with a 93.3 % yield of butyric acid (643.9 g/l). Three individual Pseudomonas putida strains, KT2440, CA-3 and GO16 (single pure cultures), differed in their ability to grow and accumulate PHA from VFAs. P. putida CA-3 achieved the highest biomass and PHA on average with individual fatty acids, exhibited the greatest tolerance to higher concentrations of butyric acid (up to 40 mM) compared to the other strains and exhibited a maximum growth rate (µMAX = 0.45 h⁻¹). Based on these observations P. putida CA-3 was chosen as the test strain with the concentrated VFA mixture derived from the AD leachate. P. putida CA-3 achieved 1.56 g of biomass/l and accumulated 39 % of the cell dry weight as PHA (nitrogen limitation) in shake flasks. The PHA was composed predominantly of 3-hydroxydecanoic acid (>65 mol%).

Life cycle assessment of experimental Al-ion batteries for energy storage applications.

In this work, the analysis of environmental performance and its coherence with circular economy priorities of different variants of Al-ion battery construction was performed. Al-ion-based batteries can be considered as one of the future alternatives for currently used Li-ion-based cells when the shortage of lithium or cobalt becomes a challenge. All tested batteries were constructed with Al anodes, polypropylene foil separator, polyvinylidene fluoride + N-Methyl-2-pyrrolidone (PVDF+NMP) binder, Al collector and laminated Al foil pouch cell. WO3, Norit and carbon from potato starch (CPS) were used as a cathode material. Saturated solutions of AlCl3 dissolved in diethylene glycol dimethyl ether (DEG) and deep eutectic solvents (DES) originating from bacterial polymer polyhydroxyalkanoate were used as electrolytes. The ReCiPe impact assessment method was used in this analysis. The indicator in this study was ReCiPe Endpoint (H) V1.07 referring to Europe. SimaPro 9.4 software with Ecoinvent 3.8 inventory database were used for all calculations. The analysis included experimental production and assembly of batteries and their end-of-life processing. Based on the performed analysis it was found that the overall weighted impact of each single construction variant of an Al-ion battery is dominated by the use of electricity, no matter which variant is considered since it is related to the electricity mix in Poland and its high dependence on fossil fuels. Overall environmental impact is the smallest for CPS DEG battery, while Norit DEG and CPS DEG variants have slightly higher impacts. The share of end-of-life processing in overall environmental impacts of all analysed variants was found low compared to the Li-ion batteries. This observation indicates the Al-ion batteries as a promising direction of alternative electrochemical devices for energy storage systems while end-of-life processing and circular solution are concerned.

PHB+aPHA Blends: From Polymer Bacterial Synthesis through Blend Preparation to Final Processing by Extrusion for Sustainable Materials Design.

The inherent brittleness of polyhydroxybutyrate (PHB), a well-studied polyhydroxyalkanoate (PHA), limits its applicability in flexible and impact-resistant applications. This study explores the potential of blending PHB with a different PHA to overcome brittleness. The synthesis of PHA polymers, including PHB and an amorphous medium-chain-length PHA (aPHA) consisting of various monomers, was achieved in previous works through canola oil fermentation. Detailed characterization of aPHA revealed its amorphous nature, as well as good thermal stability and shear thinning behavior. The blending process was carried out at different mass ratios of aPHA and PHB, and the resulting blends were studied by differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The blends exhibited complex DSC curves, indicating the presence of multiple crystalline forms of PHB. SEM images revealed the morphology of the blends, with PHB particles dispersed within the aPHA matrix. TGA showed similar thermal degradation patterns for the blends, with the residue content decreasing as the PHB content increased. The crystallinity of the blends was influenced by the PHB content, with higher PHB ratios resulting in an increased degree of crystallinity. XRD confirmed the presence of both α and ß crystals of PHB in the blends. Overall, the results demonstrate the potential of PHB+aPHA blends to enhance the mechanical properties of biopolymer materials, without com-promising the thermal stability, paving the way for sustainable material design and novel application areas.