Equiatomic AEAuX (AE=Ca-Ba, X=Al-In) Intermetallics: A Systematic Study of their Electronic Structure and Spectroscopic Properties.

The three intermetallic compounds SrAuGa, BaAuAl and BaAuGa were synthesised from the elements in niobium ampoules. The Sr compound crystallises in the orthorhombic KHg2 -type structure (Imma, a=465.6(1), b=771.8(2), c=792.6(2) pm, wR2 =0.0740, 324 F2 values, 13 variables), whereas the Ba compounds were both found to crystallise in the cubic non-centrosymmetric LaIrSi-type structure (P21 3, BaAuAl: a=696.5(1) pm; wR2 =0.0427, 446 F2 values, 12 variables; BaAuGa: a=693.49(4) pm, wR2 =0.0717, 447 F2 values, 12 variables). The samples were investigated by powder X-ray diffraction and their structures refined on the basis of single-crystal X-ray diffraction data. The title compounds, along with references from the literature (CaAuAl, CaAuGa, CaAuIn, and SrAuIn), were characterised further by susceptibility measurements and 27 Al and 71 Ga solid-state NMR spectroscopy. Theoretical calculations of the density of states (DOS) and the NMR parameters were used for the interpretation of the spectroscopic data. The electron transfer from the alkaline-earth metals and the group 13 elements onto the gold atoms was investigated through X-ray photoelectron spectroscopy (XPS), classifying these intermetallics as aurides.

Unravelling Local Atomic Order of the Anionic Sublattice in M(Al1-x Gax )4 with M=Sr and Ba by Using NMR Spectroscopy and Quantum Mechanical Modelling.

The quasibinary section of the intermetallic phases MAl4 and MGa4 with M=Sr and Ba have been characterised by means of X-ray diffraction (XRD) studies and differential thermal analysis. The binary phases show complete miscibility and form solid solutions M(Al1-x Gax )4 with M=Sr and Ba. These structures crystallise in the BaAl4 structure type with four- and five-bonded Al and/or Ga atoms (denoted as Al(4b), Al(5b), Ga(4b), and Ga(5b), respectively) that form a polyanionic Al/Ga sublattice. Solid state 27 Al NMR spectroscopic analysis and quantum mechanical (QM) calculations were applied to study the bonding of the Al centres and the influence of Al/Ga substitution, especially in the regimes with low degrees of substitution. M(Al1-x Gax )4 with M=Sr and Ba and 0.925≤x≤0.975 can be described as a matrix of the binary majority compound in which a low amount of the Ga atoms has been substituted by Al atoms. In good agreement with the QM calculations, 27 Al NMR investigations and single crystal XRD studies prove a preferred occupancy of Al(4b) for these substitution regimes. Furthermore, two different local Al environments were found, namely isolated Al(4b1) atoms and Al(4b2), due to the formation of Al(4b)-Al(4b) pairs besides isolated Al(4b) atoms within the polyanionic sublattice. QM calculations of the electric field gradient (EFG) using superlattice structures under periodic boundary conditions are in good agreement with the NMR spectroscopic results.

The Solid Solution Sr(1-x)Ba(x)Ga2: Substitutional Disorder and Chemical Bonding Visited by NMR Spectroscopy and Quantum Mechanical Calculations.

Complete miscibility of the intermetallic phases (IPs) SrGa2 and BaGa2 forming the solid solution Sr(1-x)Ba(x)Ga2 is shown by means of X-ray diffraction, thermoanalytical and metallographic studies. Regarding the distances of Sr/Ba sites versus substitution degree, a model of isolated substitution centres (ISC) for up to 10% cation substitution is explored to study the influence on the Ga bonding situation. A combined application of NMR spectroscopy and quantum mechanical (QM) calculations proves the electric field gradient (EFG) to be a sensitive measure of different bonding situations. The experimental resolution is boosted by orientation-dependent NMR on magnetically aligned powder samples, revealing in first approximation two different Ga species in the ISC regimes. EFG calculations using superlattice structures within periodic boundary conditions are in fair agreement with the NMR spectroscopy data and are discussed in detail regarding their application on disordered IPs.

NMR spectroscopy of intermetallic compounds: an experimental and theoretical approach to local atomic arrangements in binary gallides.

The results of the investigation of MGa(2) with M = Ca, Sr, Ba and of MGa(4) with M = Na, Ca, Sr, Ba by a combined application of NMR spectroscopy and quantum mechanical calculations are comprehensively evaluated. The electric-field gradient (EFG) was identified as the most reliable measure to study intermetallic compounds, since it is accessible with high precision by quantum mechanical calculations and, for nuclear spin I>1/2, by NMR spectroscopy. The EFG values obtained by NMR spectroscopy and quantum mechanical calculations agree very well for both series of investigated compounds. A deconvolution of the calculated EFGs into their contributions reveals its sensitivity to the local environment of the atoms. The EFGs of the investigated di- and tetragallides are dominated by the population of the p(x)-, p(y)-, and p(z)-like states of the Ga atoms. A general combined approach for the investigation of disordered intermetallic compounds by application of diffraction methods, NMR spectroscopy, and quantum mechanical calculations is suggested. This scheme can also be applied to other classes of crystalline disordered inorganic materials.

Copper-containing SiCN precursor ceramics (Cu@SiCN) as selective hydrocarbon oxidation catalysts using air as an oxidant.

A molecular approach to metal-containing ceramics and their application as selective heterogeneous oxidation catalysts is presented. The aminopyridinato copper complex [Cu(2)(Ap(TMS))(2)] (Ap(TMS)H=(4-methylpyridin-2-yl)trimethylsilanylamine) reacts with poly(organosilazanes) via aminopyridine elimination, as shown for the commercially available ceramic precursor HTT 1800. The reaction was studied by (1)H and (13)C NMR spectroscopy. The liberation of the free, protonated ligand Ap(TMS)H is indicative of the copper polycarbosilazane binding. Crosslinking of the copper-modified poly(organosilazane) and subsequent pyrolysis lead to the copper-containing ceramics. The copper is reduced to copper metal during the pyrolysis step up to 1000 degrees C, as observed by solid-state (65)Cu NMR spectroscopy, SEM images, and energy-dispersive spectroscopy (EDS). Powder diffraction experiments verified the presence of crystalline copper. All Cu@SiCN ceramics show catalytic activity towards the oxidation of cycloalkanes using air as oxidant. The selectivity of the reaction increases with increasing copper content. The catalysts are recyclable. This study proves the feasibility of this molecular approach to metal-containing SiCN precursor ceramics by using silylaminopyridinato complexes. Furthermore, the catalytic results confirm the applicability of this new class of metal-containing ceramics as catalysts.

Atomistic characterisation of Li+ mobility and conductivity in Li(7-x)PS(6-x)Ix argyrodites from molecular dynamics simulations, solid-state NMR, and impedance spectroscopy.

The atomistic mechanisms of Li(+) ion mobility/conductivity in Li(7-x)PS(6-x)I(x) argyrodites are explored from both experimental and theoretical viewpoints. Ionic conductivity in the title compound is associated with a solid-solid phase transition, which was characterised by low-temperature differential scanning calorimetry, (7)Li and (127)I NMR investigations, impedance measurements and molecular dynamics simulations. The NMR signals of both isotopes are dominated by anisotropic interactions at low temperatures. A significant narrowing of the NMR signal indicates a motional averaging of the anisotropic interactions above 177+/-2 K. The activation energy to ionic conductivity was assessed from both impedance spectroscopy and molecular dynamics simulations. The latter revealed that a series of interstitial sites become accessible to the Li(+) ions, whilst the remaining ions stay at their respective sites in the argyrodite lattice. The interstitial positions each correspond to the centres of tetrahedra of S/I atoms, and differ only in terms of their common corners, edges, or faces with adjacent PS(4) tetrahedra. From connectivity analyses and free-energy rankings, a specific tetrahedron is identified as the key restriction to ionic conductivity, and is clearly differentiated from local mobility, which follows a different mechanism with much lower activation energy. Interpolation of the lattice parameters as derived from X-ray diffraction experiments indicates a homogeneity range for Li(7-x)PS(6-x)I(x) with 0.97 < or = x < or = 1.00. Within this range, molecular dynamics simulations predict Li(+) conductivity at ambient conditions to vary considerably.

Electronic structure, chemical bonding, and solid-state NMR spectroscopy of the digallides of Ca, Sr, and Ba.

Combined application of (69,71)Ga NMR spectroscopy and quantum mechanical calculations reveals the chemical bonding in the digallides of Ca, Sr, and Ba. An analysis of the electron localization function (ELF) shows honeycomb-like 6(3) nets of the Ga atoms as the most prominent structural features in SrGa(2) and BaGa(2). For CaGa(2) a description of a 3+1-coordinated Ga atom is revealed by the ELF and by an analysis of interatomic distances. The NMR spectroscopic signal shift is mainly due to the Knight shift and is almost equal for the investigated digallides, whereas the anisotropy of the signal shift decreases with the radius of the alkaline-earth metals. Calculated and observed values of the electric field gradient (EFG) are in good agreement for CaGa(2) and BaGa(2) but differ by about 21 % for SrGa(2) indicating structural instability. Better agreement is achieved by considering a puckering of the Ga layers. For BaGa(2) an instability of the structure is indicated by a peak in the density of states at the Fermi level, which is shifted to lower energies when taking puckering of the Ga layers into account. Both structural modifications are confirmed by crystallographic information. The Fermi velocity of the electrons is strongly anisotropic and is largest in the (001) plane of the crystal structure. This results in an alignment of the crystallites with the [001] axis perpendicular to the magnetic field as observed in (69,71)Ga NMR spectroscopy and magnetic susceptibility experiments. The electron transport is predominantly mediated by the Ga-Ga p(x)- and p(y)-like electrons in the (001) plane. The specific heat capacity of BaGa(2) was determined and indicated the absence of phase transitions between 1.8 and 320 K.

11B and 89Y solid state MAS NMR spectroscopic investigations of the layered borides YTB4 (T = Mo, W, Re).

The YCrB4 type borides YTB4 (T = Mo, W, Re) were synthesized from the elements by arc-melting and subsequent annealing. The structures were refined from single crystal X-ray diffractometer data: Pbam, a = 602.84(8), b = 1164.5(1), c = 361.20(4) pm, wR2 = 0.0404, 624 F2 values, 26 variables for YMoB4, a = 603.00(7), b = 1165.1(1), c = 360.63(6) pm, wR2 = 0.0487, 474 F2 values, 26 variables for YWB4, and a = 596.67(6), b = 1154.4(1), c = 360.21(4) pm, wR2 = 0.0465, 544 F2 values, 26 variables for YReB4. The boron atoms build up planar networks which are a tessellation of slightly distorted pentagons and heptagons. Adjacent networks coordinate the transition metal and yttrium atoms in the form of pentagonal and heptagonal prisms, respectively. The four crystallographically distinct boron sites are differentiated by high-resolution 11B solid state isotropic magnetic shifts and nuclear electric quadrupolar coupling constants. Partial site assignments are possible based on comparisons with electric field gradient calculations using the WIEN2k code. 89Y MAS NMR spectroscopic studies suggest substantially weaker Knight shift contributions to the resonance frequencies when compared to other intermetallic yttrium compounds, including other ternary yttrium boride compounds measured previously.

Synthesis, structure, and high-temperature thermoelectric properties of boron-doped Ba8Al14Si31 clathrate I phases.

Single crystals of boron-doped Ba8Al14Si31 clathrate I phase were prepared using Al flux growth. The structure and elemental composition of the samples were characterized by single-crystal and powder X-ray diffraction; elemental analysis; and multinuclear (27)Al, (11)B, and (29)Si solid-state NMR. The samples' compositions of Ba8B0.17Al14Si31, Ba8B0.19Al15Si31, and Ba8B0.32Al14Si31 were consistent with the framework-deficient clathrate I structure Ba8Al(x)Si(42-3/4x)cube(4-1/4x) (x = 14, cube = lattice defect). Solid-state NMR provides further evidence for boron doped into the framework structure. Temperature-dependent resistivity indicates metallic behavior, and the negative Seebeck coefficient indicates that transport processes are dominated by electrons. Thermal conductivity is low, but not significantly lower than that observed in the undoped Ba8Al14Si31 prepared in the same manner.

Equiatomic intermetallic compounds YTX (T = Ni, Ir; X = Si, Ge, Sn, Pb): a systematic study by 89Y solid state NMR and ¹¹9Sn Mössbauer spectroscopy.

The equiatomic TiNiSi type tetrelides YTX (space group Pnma) with T = Ni, Ir and X = Si, Ge, Sn, Pb were synthesized from the elements by arc-melting or via high-frequency-melting of the elements in sealed niobium ampoules. All samples were characterized by powder X-ray diffraction using the Guinier technique. The structures of YNiGe, YNiPb, YIrSi, YIrGe, and YIrSn were refined from single crystal X-ray diffractometer data. The YTX tetrelides are characterized by a three-dimensional [TX] network that consists of puckered T3X3 hexagons with T-X distances in the order of the sums of the covalent radii. YIrSi and YIrGe show a reverse occupancy of the T and X sites with respect to the remaining YTX compounds, which is most likely a size effect. Solid state NMR studies reveal the sensitivity of (89)Y Knight shifts to electronic structure details. A monotonic dependence on the tetrelide Pauling electronegativity is observed in addition. The stannides YTSn (T = Ni, Rh, Ir, Pt) were further characterized by (119)Sn Mössbauer spectroscopy. They show single signals that are subjected to quadrupole splitting. Comparison of the isomer shifts with the whole series of YTSn stannides gives no hint of obvious correlations as a consequence of the valence electron count but reveals a systematic decrease with atomic number within a given group.

The first silicon-based cationic clathrate III with high thermal stability: Si172-xPxTey (x=2y, y>20).

A new representative of a very rare clathrate III family, Si130P42Te21, has been synthesized from the elements. It crystallizes in the tetragonal space group P4(2)/mnm (no. 136) with the unit cell parameters a=19.2632(3) angstroms, c=10.0706(2) angstroms. Single crystal X-ray diffraction and solid state 31P NMR revealed a non-random distribution of phosphorus atoms over the framework positions. The crystal structure features a peculiar packing of large polyhedra Te@(Si/P)(n) never observed before for cationic clathrates. Despite the structural complexity, the composition of the novel clathrate Is in accordance with the Zintl rule, which was confirmed by a combination of optical metallography, scanning electron microscopy (SEM) and wavelength dispersive X-ray spectroscopy (WDXS), as well as by diamagnetic and semiconducting behavior of the synthesized phase. Clathrate Si130P42Te21 exhibits the highest reported thermal stability for this class of materials, it decomposes at 1510 K. This opens new perspectives for the creation of clathrate-based materials for high-temperature applications.