Biodegradable dendritic positron-emitting nanoprobes for the noninvasive imaging of angiogenesis.

A biodegradable positron-emitting dendritic nanoprobe targeted at alpha(v)beta(3) integrin, a biological marker known to modulate angiogenesis, was developed for the noninvasive imaging of angiogenesis. The nanoprobe has a modular multivalent core-shell architecture consisting of a biodegradable heterobifunctional dendritic core chemoselectively functionalized with heterobifunctional polyethylene oxide (PEO) chains that form a protective shell, which imparts biological stealth and dictates the pharmacokinetics. Each of the 8 branches of the dendritic core was functionalized for labeling with radiohalogens. Placement of radioactive moieties at the core was designed to prevent in vivo dehalogenation, a potential problem for radiohalogens in imaging and therapy. Targeting peptides of cyclic arginine-glycine-aspartic acid (RGD) motifs were installed at the terminal ends of the PEO chains to enhance their accessibility to alpha(v)beta(3) integrin receptors. This nanoscale design enabled a 50-fold enhancement of the binding affinity to alpha(v)beta(3) integrin receptors with respect to the monovalent RGD peptide alone, from 10.40 nM to 0.18 nM IC(50). Cell-based assays of the (125)I-labeled dendritic nanoprobes using alpha(v)beta(3)-positive cells showed a 6-fold increase in alpha(v)beta(3) receptor-mediated endocytosis of the targeted nanoprobe compared with the nontargeted nanoprobe, whereas alpha(v)beta(3)-negative cells showed no enhancement of cell uptake over time. In vivo biodistribution studies of (76)Br-labeled dendritic nanoprobes showed excellent bioavailability for the targeted and nontargeted nanoprobes. In vivo studies in a murine hindlimb ischemia model for angiogenesis revealed high specific accumulation of (76)Br-labeled dendritic nanoprobes targeted at alpha(v)beta(3) integrins in angiogenic muscles, allowing highly selective imaging of this critically important process.

Strategies for molecular imaging of epidermal growth factor receptor tyrosine kinase in cancer.

A wealth of research has focused on developing targeted cancer therapies by specifically inhibiting epidermal growth factor receptor tyrosine kinase (EGFR-TK). However, the outcome of most EGFR-TK-targeted drugs that were approved by the Food and Drug Administration or entered clinical trials has been only moderate. Enhancement of EGFR-targeted therapy hinges on a reliable in vivo quantitative molecular imaging method. Such a method would enable monitoring of receptor drug binding and receptor occupancy in vivo; determination of the duration of EGFR inhibition in vivo; and, potentially, identification of a primary or secondary mutation in EGFR leading to drug interaction or loss of EGFR recognition by the drug. This review analyzes the most recent strategies to visualize and quantify EGFR-TK in cancer by nuclear medicine imaging and describes future directions.

Toward the synthesis of the rare N-(trifluoromethyl)amides and the N-(difluoromethylene)-N-(trifluoromethyl)amines [RN(CF3)CF2R'] using BrF3.

A synthesis of a wide range of different aliphatic, aromatic, and heterocyclic N-(trifluoromethyl)amides along with aromatic N-(difluoromethylene)-N-(trifluoromethyl)amine derivatives has been developed. The starting materials are the easily available isothiocyanates, and the fluorinating reagent is the commercially available bromine trifluoride. The reaction is performed under mild conditions, and the fluorinated amides and amines are produced in moderate to high yields.

Facile, efficient approach to accomplish tunable chemistries and variable biodistributions for shell cross-linked nanoparticles.

The in vivo behavior of shell cross-linked knedel-like (SCK) nanoparticles is shown to be tunable via a straightforward and versatile process that advances SCKs as attractive nanoscale carriers in the field of nanomedicine. Tuning of the pharmacokinetics was accomplished by grafting varied numbers of methoxy-terminated poly(ethylene glycol) (mPEG) chains to the amphiphilic block copolymer precursors, together with chelators for the radioactive tracer and therapeutic agent (64)Cu, followed by self-assembly into block copolymer micelles and chemical cross-linking throughout the shell regions. (64)Cu-radiolabeling was then performed to evaluate the SCKs in vivo by means of biodistribution experiments and positron emission tomography (PET). It was found that the blood retention of PEGylated SCKs could be tuned, depending on the mPEG grafting density and the nanoparticle surface properties. A semiquantitative model of the density of mPEG surface coverage as a function of in vivo behavior was applied to enhance the understanding of this system.

Synthesis and characterization of core-shell star copolymers for in vivo PET imaging applications.

The synthesis of core-shell star copolymers via living free radical polymerization provides a convenient route to three-dimensional nanostructures having a poly(ethylene glycol) outer shell, a hydrophilic inner shell bearing reactive functional groups, and a central hydrophobic core. By starting with well-defined linear diblock copolymers, the thickness of each layer, overall size/molecular weight, and the number of internal reactive functional groups can be controlled accurately, permitting detailed structure/performance information to be obtained. Functionalization of these polymeric nanoparticles with a DOTA-ligand capable of chelating radioactive (64)Cu nuclei enabled the biodistribution and in vivo positron emission tomography (PET) imaging of these materials to be studied and correlated directly to the initial structure. Results indicate that nanoparticles with increasing PEG shell thickness show increased blood circulation and low accumulation in excretory organs, suggesting application as in vivo carriers for imaging, targeting, and therapeutic groups.

Small molecule receptors as imaging targets.

The aberrant expression and function of certain receptors in tumours and other diseased tissues make them preferable targets for molecular imaging. PET and SPECT radionuclides can be used to label specific ligands with high affinity for the target receptors. The functional information obtained from imaging these receptors can be used to better understand the systems under investigation and for diagnostic and therapeutic applications. This review discusses some of the aspects of receptor imaging with small molecule tracers by PET and SPECT and reviews some of the tracers for the receptor imaging of tumours and brain, heart and lung disorders.

Novel method for incorporating the CHF(2) group into organic molecules using BrF(3).

2-Alkyl-1,3-dithiane derivatives, easily made from alkyl bromides and the parent 1,3-dithiane, were reacted with BrF(3) to form the corresponding 1,1-difluoromethyl alkanes (RCHF(2)) in 60-75% yield. The reaction proceeds well with primary alkyl halides. The limiting step for secondary alkyl halides is the relatively low yield of the dithiane preparation. The two sulfur atoms of the dithiane are essential for the reaction.

The first general method for alpha-trifluoromethylation of carboxylic acids using BrF3.

2-Carbomethoxy-1,1-bis(methylsulfide)-1-alkenes, easily made from carboxylic acids, CS(2) and MeI, were treated with BrF(3) producing eventually the desired alpha-trifluoromethyl carboxylate derivatives--RCH(CF(3))COOR'--in good yields.

Long-term evaluation of TiO2-based 68Ge/68Ga generators and optimized automation of [68Ga]DOTATOC radiosynthesis.

Interest in using (68)Ga is rapidly increasing for clinical PET applications due to its favorable imaging characteristics and increased accessibility. The focus of this study was to provide our long-term evaluations of the two TiO(2)-based (68)Ge/(68)Ga generators and develop an optimized automation strategy to synthesize [(68)Ga]DOTATOC by using HEPES as a buffer system. This data will be useful in standardizing the evaluation of (68)Ge/(68)Ga generators and automation strategies to comply with regulatory issues for clinical use.

Evaluation of multivalent, functional polymeric nanoparticles for imaging applications.

A series of multivalent, functional polymer nanoparticles with diagnostic/imaging units and targeting ligands for molecular targeting were synthesized with the loading of the chain-end-functionalized GRGDS peptide targeting sequence (model system based on integrin α(v)ß(3)) ranging from 0 to 50%. Accurate structural and functional group control in these systems was achieved through a modular approach involving the use of multiple functionalized macromonomer/monomer units combined with living free radical polymerization. In cellulo results show an increase in uptake in α(v)ß(3) integrin-positive U87MG glioblastoma cells with increasing RGD loading and a possible upper limit on the effectiveness of the number of RGD peptides for targeting α(v)ß(3) integrin. Significantly, this increased targeting efficiency is coupled with in vivo biodistribution results, which show decreased blood circulation and increased liver uptake with increasing RGD loading. The results demonstrate the importance of controlling ligand loading in order to achieve optimal performance for therapeutic and imaging applications for multivalent nanoparticle-based systems.

Characterization of 64Cu-DOTA-conatumumab: a PET tracer for in vivo imaging of death receptor 5.

UNLABELLED: Conatumumab is a fully human monoclonal antibody that binds to and activates human death receptor 5 (DR5; also known as TRAIL receptor 2). The purpose of this study was to characterize (64)Cu-labeled conatumumab as a PET tracer for imaging DR5 in tumors. METHODS: DOTA-conatumumab was synthesized by incubating conatumumab with 2,2',2″-(10-(2-(2,5-dioxopyrrolidin-1-yloxy)-2-oxoethyl)-1,4,7,10-tetraazacyclododecane-1,4,7-triyl)triacetic acid (DOTA-NHS). The absolute numbers of DOTA molecules per conatumumab molecules were determined by matrix-assisted laser desorption ionization mass spectrometry and electrospray ionization quadrupole time-of-flight mass spectrometry. (64)Cu-DOTA-conatumumab was prepared by incubating (64)CuCl(2) (33-222 MBq) with DOTA-conatumumab at 37°C for 1 h. Binding of conatumumab and DOTA-conatumumab to Fc-coupled human DR5 (huTR2-Fc) was tested in a kinetic analysis assay, and the biologic activity of copper-DOTA-conatumumab was measured using a caspase-3/7 luminescent assay. In vivo evaluation of DOTA-conatumumab and copper-DOTA-conatumumab was done in severe combined immunodeficiency mice bearing Colo205 xenografts: tissue uptake was determined with biodistribution studies, and small-animal PET and autoradiography were used to determine the uptake of (64)Cu-DOTA conatumumab into tumors and other tissues. RESULTS: DOTA-conatumumab was prepared with an average of 5 DOTA molecules per conatumumab molecule. The in vitro median effective concentration required to induce a 50% effect of DOTA-conatumumab and conatumumab from the assay were 389 and 320 pM, respectively. The median effective dose (±SD) of DOTA-conatumumab and conatumumab via the caspase assay was 135 ± 31 and 128 ± 30 pM, respectively. In female CB17 severe combined immunodeficiency mice bearing Colo205 xenografts, DOTA-conatumumab and conatumumab inhibited tumor growth to the same extent. Small-animal PET studies showed tumor uptake at 24 h after injection of the tracer, with a mean standardized uptake value of 3.16 (n = 2). Tumor uptake was decreased by the coadministration of 400 µg of unlabeled conatumumab (mean standardized uptake value, 1.55; n = 2), suggesting saturable uptake. Tissue uptake determined by biodistribution studies was in agreement with the small-animal PET findings. CONCLUSION: These results suggest that (64)Cu-DOTA-conatumumab is a potential PET tracer for imaging DR5 in tumors and may be useful for measuring on-target occupancy by conatumumab.

Folate-mediated Cell Uptake of Shell-crosslinked Spheres and Cylinders.

This paper reports the synthesis of shell crosslinked nanoparticles (SCKs) of spherical and cylindrical shapes, and their functionalization with folate using a poly(ethylene glycol) (PEG) construct that has folate and an amine group as the opposing chain termini. By use of confocal microscopy, we demonstrate the selective delivery of folate conjugated SCKs to human KB cells, a cell line that overexpresses the folate receptor (FR). A higher extent of polymer uptake by the cells occurred with the cylindrical SCK morphology, relative to the spherical SCKs, when both samples had the same fluorescein-5-thiosemicarbazide and polymer concentrations. In both cases, by using excess free folic acid as a block or SCKs lacking the folate-PEG conjugate, cell uptake was significantly reduced. These results suggest that particle shape may play an important role in receptor-mediated cell uptake, and may be exploited in the targeted delivery of nanoscopic drugs.

Labeling of Polymer Nanostructures for Medical Imaging: Importance of crosslinking extent, spacer length, and charge density.

Radiolabeling studies were employed to investigate the influence of structure on the efficiency of surface functionalization for poly(acrylic acid)-coated shell crosslinked nanoparticles (SCKs) with two types of amine-terminated DOTA chelators. An intricate interplay between the chemical and physical properties of both the DOTA derivative and the SCK nanostructures was revealed, demonstrating the importance of structural control.

Structural effects on the biodistribution and positron emission tomography (PET) imaging of well-defined (64)Cu-labeled nanoparticles comprised of amphiphilic block graft copolymers.

The synthesis of poly(methyl methacrylate-co-methacryloxysuccinimide-graft-poly(ethylene glycol)) (PMMA-co-PMASI-g-PEG) via living free radical polymerization provides a convenient route to well-defined amphiphilic graft copolymers having a controllable number of reactive functional groups, variable length PEG grafts, and low polydispersity. These copolymers were shown to form PMMA-core/PEG-shell nanoparticles upon hydrophobic collapse in water, with the hydrodynamic size being defined by the molecular weight of the backbone and the PEG grafts. Functionalization of these polymeric nanoparticles with a 1,4,7,10-tetraazacyclododecanetetraacetic acid (DOTA) ligand capable of chelating radioactive 64Cu nuclei enabled the biodistribution and in vivo positron emission tomography of these materials to be studied and directly correlated to the initial structure. Results indicate that nanoparticles with increasing PEG chain lengths show increased blood circulation and low accumulation in excretory organs, suggesting the possible use of these materials as stealth carriers for medical imaging and systemic administration.

Alpha-trifluoromethylation of secondary and sterically hindered carboxylates with use of BrF3.

Secondary esters and those with sterical hindrance at the beta carbon were reacted with base, carbon disulfide, and methyl iodide to produce methyl 2-carboalkoxydithioalkenoate (2). These compounds were reacted with BrF(3), forming the corresponding alpha-trifluoromethyl esters (3) along with 1,1-difluoro-2-trifluoromethyl-2-alkyl ethers (4). The products of type 4 have been transformed to derivatives of type 3, thus raising the overall yields of the target respective alpha-trifluoromethyl esters to 65-80%. The reaction is tolerant to different functional groups such as halogens, protected alcohols, esters, and lactones.

General method for the preparation of beta,beta-difluoroacrylates using BrF3.

Various esters were reacted with base, carbon disulfide, and methyl iodide, producing 2-carboalkoxy-1,1-bis(methyl sulfide)-1-alkenes (2). The reaction of 2 with BrF(3), followed by oxidation with HOF.CH(3)CN gave the bromodifluorosulfonyl derivatives 5. Subsequent treatment with Raney nickel led to alpha-substituted beta,beta-difluoroacrylates 6 in overall yields of 50-80%.

A novel method for the preparation of alpha,alpha'-difluoroesters and acids using BrF3.

Alkyl-, haloalkyl-, and ketoalkyl-2-ethoxycarbonyl-1,3-dithianes were easily made from the appropriate primary or secondary alkyl bromides, 1,3-dithiane, and ethyl chloroformate. They were reacted with BrF(3) to form the corresponding alpha,alpha-difluoro esters in 65-75% yield. Reaction conditions are very mild (1-2 min, 0 degrees C). The two sulfur atoms of the dithiane are essential for the reaction.

From alkyl halides to alkyltrifluoromethyls using bromine trifluoride.

Under the right conditions, bromine trifluoride can be a useful tool for generating new types of reactions and compounds. Thus, tris(methylthio)alkyl derivatives, easily prepared from the corresponding alkyl bromides, were converted to the corresponding RCHBrCF2SMe or RCHBrCF3 compounds. The bromine atom, however, could be easily reduced forming eventually R'CF2SMe or R'CF3. If desired, the bromine atom can serve as an entry for constructing terminal difluoroolefins.