RESUMEN
The pursuit of stable and efficient electrocatalysts toward seawater oxidation is of great interest, yet it poses considerable challenges. Herein, the utilization of Cr-doped CoFe-layered double hydroxide nanosheet array is reported on nickel-foam (Cr-CoFe-LDH/NF) as an efficient electrocatalyst for oxygen evolution reaction in alkaline seawater. The Cr-CoFe-LDH/NF catalyst can achieve current densities of 500 and 1000 mA cm -2 with remarkably low overpotentials of only 334 and 369 mV, respectively. Furthermore, it maintains at least 100 h stability when operated at 500 mA cm-2.
RESUMEN
INTRODUCTION: Femoral fractures account for â¼1% to 2% of all pediatric bone injuries and are a common occurrence in children. The conservative approach, employing either a single or one-and-a-half spica casts, has been traditionally favored, yielding satisfactory outcomes in select cases. This study aims to compare both procedures regarding functional and radiologic outcomes, complications, and parents' satisfaction. METHODS: In this randomized controlled trial, we enrolled 84 pediatric patients, aged between 2 and 6 years, presenting with femoral fractures. Participants were randomly allocated into 2 groups; one receiving single-limb spica cast fixation (n=42) and the other receiving one-and-a-half spica cast fixation (n=42). We assessed postprocedural functional and radiologic outcomes. Other evaluations focused on parental ease in maintaining hygiene for the casted child, the child's mobility capabilities including standing and crawling, and the incidence of skin complications. RESULTS: No significant variance was observed between the 2 groups concerning the time to bone union, and the overall complication rates. Parental satisfaction was notably higher in the single-limb spica group, particularly regarding the ease of maintaining hygiene for the casted child and the child's mobility while encased in the cast (P<0.001). Furthermore, a significant correlation was identified between the one-and-a-half spica application and the increased occurrence of skin pressure ulcers (P<0.001). CONCLUSION: Both single-limb and one-and-a-half spica cast applications demonstrated comparable results in functional and radiologic outcomes, as well as in complication rates. However, parents favored the single-limb method due to its facilitation of a more manageable lifestyle for both the child and their parents. These considerations suggest that the single-limb hip spica cast fixation may be preferable in managing pediatric femoral fractures. LEVEL OF EVIDENCE: Level II.
RESUMEN
Ammonia (NH3 ) is an indispensable feedstock for fertilizer production and one of the most ideal green hydrogen rich fuel. Electrochemical nitrate (NO3 - ) reduction reaction (NO3 - RR) is being explored as a promising strategy for green to synthesize industrial-scale NH3 , which has nonetheless involved complex multi-reaction process. This work presents a Pd-doped Co3 O4 nanoarray on titanium mesh (Pd-Co3 O4 /TM) electrode for highly efficient and selective electrocatalytic NO3 - RR to NH3 at low onset potential. The well-designed Pd-Co3 O4 /TM delivers a large NH3 yield of 745.6 µmol h-1 cm-2 and an extremely high Faradaic efficiency (FE) of 98.7% at -0.3 V with strong stability. These calculations further indicate that the doping Co3 O4 with Pd improves the adsorption characteristic of Pd-Co3 O4 and optimizes the free energies for intermediates, thereby facilitating the kinetics of the reaction. Furthermore, assembling this catalyst in a Zn-NO3 - battery realizes a power density of 3.9 mW cm-2 and an excellent FE of 98.8% for NH3 .
RESUMEN
Seawater electrolysis driven by renewable electricity is deemed a promising and sustainable strategy for green hydrogen production, but it is still formidably challenging. Here, we report an iron-doped NiS nanosheet array on Ni foam (Fe-NiS/NF) as a high-performance and stable seawater splitting electrocatalyst. Such Fe-NiS/NF catalyst needs overpotentials of only 420 and 270 mV at 1000 mA cm-2 for the oxygen evolution reaction and hydrogen evolution reaction in alkaline seawater, respectively. Furthermore, its two-electrode electrolyzer needs a cell voltage of 1.88 V for 1000 mA cm-2 with 50 h of long-term electrochemical durability in alkaline seawater. Additionally, in situ electrochemical Raman and infrared spectroscopy were employed to detect the reconstitution process of NiOOH and the generation of oxygen intermediates under reaction conditions.
RESUMEN
Seawater electrolysis has great potential to generate clean hydrogen energy, but it is a formidable challenge. In this study, we report CoFe-LDH nanosheet uniformly decorated on a CuO nanowire array on Cu foam (CuO@CoFe-LDH/CF) for seawater oxidation. Such CuO@CoFe-LDH/CF exhibits high oxygen evolution reaction electrocatalytic activity, demanding only an overpotential of 336 mV to generate a current density of 100 mA cm-2 in alkaline seawater. Moreover, it can operate continuously for at least 50 h without obvious activity attenuation.
RESUMEN
Electrocatalytic reduction of nitrite to NH3 provides a new route for the treatment of nitrite in wastewater, as well as an attractive alternative to NH3 synthesis. Here, we report that an oxygen vacancy-rich TiO2-x nanoarray with different crystal structures self-supported on the Ti plate can be prepared by hydrothermal synthesis and by subsequently annealing it in an Ar/H2 atmosphere. Anatase TiO2-x (A-TiO2-x) can be a superb catalyst for the efficient conversion of NO2- to NH3; a high NH3 yield of 12,230.1 ± 406.9 µg h-1 cm-2 along with a Faradaic efficiency of 91.1 ± 5.5% can be achieved in a 0.1 M NaOH solution containing 0.1 M NaNO2 at -0.8 V, which also exhibits preferable durability with almost no decay of catalytic performances after cycling tests and long-term electrolysis. Furthermore, a Zn-NO2- battery with such A-TiO2-x as a cathode delivers a power density of 2.38 mW cm-2 as well as a NH3 yield of 885 µg h-1 cm-2.
RESUMEN
Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol-KA oil. Molecular oxygen (O2), hydrogen peroxide (H2O2), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.
Asunto(s)
Ciclohexanonas , Peróxido de Hidrógeno , Ciclohexanos , Ciclohexanoles , Níquel , Oxidantes , Oxígeno , PolvosRESUMEN
Here, five different samples of neodymium (Nd) incorporated 3D-mesoporous siliceous materials were fabricated using a single-step hydrothermal technique. Typically, all samples were subjected to several qualitative elemental and quantitative analyses such as X-ray diffraction, N2 -adsorption/desorption, scanning electron microscopy, energy dispersive X-ray, mapping, high resolution transmission electron microscopy, diffuse reflectance ultraviolet-visible, and Raman spectroscopy. The characterization results showed that at small loading of Nd (i.e. Si/Nd < 20), only isolated centres of trivalent neodymium ions were tetrahedrally coordinated in the TUD-1 matrix. However, with increasing neodymium loading, additional nanoparticles of neodymium oxide with size 10-20 nm were embedded into silica host pores. Detailed photoluminescence (PL) analysis of all samples was carried out by recording the emission profiles at two diverse excitation wavelengths, 333 and 343 nm, to understand the effect of the Nd3+ environment on the PL emission spectra with special attention to the area between 400 and 600 nm. Most importantly, different peaks of the emission spectrum of each sample exhibited a distinct shape based on the Nd3+ environment. This performance was superior evidence that PL can be applied as a simple and efficient characterization tool to understand the nature of Nd3+ ion linkage with a silica matrix.
Asunto(s)
Nanopartículas , Neodimio , Microscopía Electrónica de Transmisión , Dióxido de Silicio , Difracción de Rayos XRESUMEN
The photocatalytic reduction of CO2 by water vapor to produce light hydrocarbons was studied over a series of catalysts consisting of variable loading of Ti incorporated in TUD-1 mesoporous silica, either modified by ZnO nanoparticles or isolated Cr-sites. Unexpectedly, the performance of ZnO-Ti-TUD-1 and Cr-Ti-TUD-1 was inferior to the parent Ti-TUD-1. An explanation can be found in experiments on the photocatalytic degradation of a mixture of hydrocarbons (i.e., CH4, C2H4, C2H6, C3H6, and C3H8) under the same illumination conditions. Ti-TUD-1 exhibits the poorest activity in hydrocarbon degradation, while ZnO-Ti-TUD-1 and Cr-Ti-TUD-1 showed very significant degradation rates. This study clearly demonstrates the importance of evaluating hydrocarbon conversion over photocatalysts active in converting CO2 to hydrocarbons (in batch reactors).
RESUMEN
In order to maximize the utilization of noble metals in catalysis, single atom of palladium (Pd) and platinum (Pt) were incorporated individually in the framework of porous ceria (CeO2) by using a one-step flash combustion method. Samples with different Pd and Pt loading (0.5, 1, 2.5, and 5 wt%) were prepared and examined by using different analysis techniques such as XRD, ICP, N2 sorption measurements, SEM, HR-TEM, and XPS. The characterization data confirms the formation of zero-state single-atom Pt and Pd (with possible formation of Pd nanoparticles with a size less than 5 nm) incorporated onto the three-dimensional porous ceria structure. The catalytic activity of the synthesized materials was studied in the cyclohexene reduction to cyclohexane at 393 K and 3 atm of pure hydrogen (H2) gas as a model reaction. The obtained results demonstrated that the conversion percentage of cyclohexene is increasing with Pd or Pt loading. The best cyclohexene conversion, 21% and 29%, was achieved over the sample that contains 5 wt% of Pt and Pd, respectively. The collected catalytic data fit the zero-order reaction model, and the rate constant of each catalyst was determined. The catalytic experiments of the most-performed catalysts were repeated five times and the obtained loss in activity was insignificant.
RESUMEN
Herein, a brush-like Cu2O-CoO core-shell nanoarray on copper foam (Cu2O-CoO/CF) can achieve efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance in alkaline seawater electrolyte. This Cu2O-CoO/CF shows overpotentials as low as 315 and 295 mV at 100 mA cm-2 for the OER and HER, respectively. Moreover, it could also be operated at 1.82 V with 100 mA cm-2 in a two-electrode electrolyzer and exhibits strong stability for at least 50 hours of electrolysis. The excellent performance and hierarchical structure advantages of Cu2O-CoO/CF provide new ideas for designing efficient seawater splitting electrocatalysts.
RESUMEN
The cobalt nanoparticles decorated biomass Juncus derived carbon (Co@JDC) was prepared by facile calcination strategy and applied to activate peroxymonosulfate (PMS) for eliminating ofloxacin (OFX) in the water environment. The results of catalytic experiments show that 97% of OFX degradation efficiency and 70.4% of chemical oxygen demand removal rate are obtained within 24 min at 0.1 g L-1 Co@JDC, 0.2 g L-1 PMS, 20 mg L-1 OFX (100 mL), and pH = 7, which indicates that Co@JDC/PMS system exhibits excellent performance. Meanwhile, the experimental results of affect factor show that Co@JDC/PMS system can operate in a wider pH range (3-9) and Cl-1, NO3-1, and SO42- have an ignorable effect on OFX degradation. The radical identification experiments confirm that SO4Ë-, ·OH, O2Ë-, and 1O2 are involved in the process of PMS activation, especially SO4Ë- and 1O2 are the main contributors. Furthermore, a possible PMS activation mechanism by Co@JDC was proposed and the degradation pathways of OFX were deduced. Finally, the stable catalytic activity, negligible leaching of Co2+, and the outstanding degradation efficiency for other antibiotics prove that Co@JDC possesses good stability and universality.
Asunto(s)
Cobalto , Nanopartículas , Carbono , Ofloxacino , Biomasa , PeróxidosRESUMEN
Electrochemical reduction of nitrite (NO2-) can satisfy the necessity for NO2- contaminant removal and deliver a sustainable pathway for ammonia (NH3) generation. Its practical application yet requires highly efficient electrocatalysts to boost NH3 yield and Faradaic efficiency (FE). In this study, CoP nanoparticle-decorated TiO2 nanoribbon array on Ti plate (CoP@TiO2/TP) is verified as a high-efficiency electrocatalyst for the selective reduction of NO2- to NH3. When measured in 0.1 M NaOH with NO2-, the freestanding CoP@TiO2/TP electrode delivers a large NH3 yield of 849.57 µmol h-1 cm-2 and a high FE of 97.01% with good stability. Remarkably, the subsequently fabricated Zn-NO2- battery achieves a high power density of 1.24 mW cm-2 while delivering a NH3 yield of 714.40 µg h-1 cm-2.
RESUMEN
Electroreduction of nitrite (NO2 - ) to ammonia (NH3 ) provides a sustainable approach to yield NH3 , whilst eliminating NO2 - contaminants. In this study, Ni nanoparticles strutted 3D honeycomb-like porous carbon framework (Ni@HPCF) is fabricated as a high-efficiency electrocatalyst for selective reduction of NO2 - to NH3 . In 0.1â M NaOH with NO2 - , such Ni@HPCF electrode obtains a significant NH3 yield of 12.04â mg h-1 mgcat. -1 and a Faradaic efficiency of 95.1 %. Furthermore, it exhibits good long-term electrolysis stability.
RESUMEN
Electrochemical reduction of nitrite (NO2-) not only removes NO2- contaminant but also produces high-added value ammonia (NH3). This process, however, needs efficient and selective catalysts for NO2--to-NH3 conversion. In this study, Ruthenium doped titanium dioxide nanoribbon array supported on Ti plate (Ru-TiO2/TP) is proposed as an efficient electrocatalyst for the reduction of NO2- to NH3. When operated in 0.1 M NaOH containing NO2-, such Ru-TiO2/TP achieves an ultra-large NH3 yield of 1.56 mmol h-1 cm-2 and a super-high Faradaic efficiency of 98.9%, superior to its TiO2/TP counterpart (0.46 mmol h-1 cm-2, 74.1%). Furthermore, the reaction mechanism is studied by theoretical calculation.
RESUMEN
Electrocatalytic reduction of nitrite (NO2-) to ammonia (NH3) can simultaneously achieve wastewater treatment and ammonia production, but it needs efficient catalysts. Herein, Cu2O particles self-supported on Cu foam with enriched oxygen vacancies are developed to enable selective NO2- reduction to NH3, exhibiting a maximum NH3 yield rate of 7510.73 µg h-1 cm-2 and high faradaic efficiency of 94.21% at -0.6 V in 0.1 M PBS containing 0.1 M NaNO2. Density functional theory calculations reveal the vital role of oxygen vacancies during the nitrite reduction process, as well as the reaction mechanisms and the potential limiting step involved. This work provides a new avenue to the rational design of Cu-based catalysts for NH3 electrosynthesis.
RESUMEN
The increasing energy demand and related environmental issues have drawn great attention worldwide, thus necessitating the development of sustainable technologies to preserve the ecosystems for future generations. Electrocatalysts for energy-conversion reactions such as the hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2RR) are at the heart of these renewable energy technologies, but they suffer from sluggish kinetics due to the multistep electron and mass transfer. State-of-the-art catalysts are thus highly desired to boost the conversion efficiencies, which are still inadequate. Recently, as a typical transition metal dichalcogenide, molybdenum disulfide (MoS2) with unique physicochemical properties has been verified as a promising material for catalyzing key electrochemical reactions (i.e., HER, NRR, and CO2RR), presenting excellent performances. Therefore, in this review, we give insight into the structure and synthetic strategies of MoS2. Recent advances in MoS2-based materials for the three key electrochemical reactions are briefly summarized. Open challenges and perspectives of MoS2-based electrocatalysts toward HER, NRR, and CO2RR are also outlined.
RESUMEN
Electrochemical nitrate reduction reaction (NO3RR) is an attractive alternative to NH3 production under ambient conditions. Although noble metal-based catalysts exhibit decent NO3RR performance to NH3, the high cost and insufficient supply obstruct its large-scale application. In this work, we report that Fe-doped Co3O4 nanoarray efficiently catalyzes NO3RR for NH3 production in neutral conditions. It achieves a large NH3 yield of 0.624 mg mgcat.-1h-1 and high Faradaic efficiency of 95.5% at -0.7 V versus reversible hydrogen electrode. Besides, this catalyst exhibits good NO3RR stability. Density functional theory calculations reveal favorable adsorption of NO3- on Fe-doped Co3O4, which is conducive to NH3 production in the NO3RR process.
RESUMEN
Electrochemical reduction of nitrite to ammonia can simultaneously achieve ammonia synthesis and N-contaminant removal under mild conditions, which has attracted widespread attention but still lacks efficient catalysts. In this work, Ag nanoarray using NiO nanosheets array on carbon cloth as support is reported as an efficient electrocatalyst to selectively reduce nitrite to ammonia. In 0.1 M NaOH with 0.1 M NO2-, such catalyst exhibits a maximum ammonia yield of 5,751 µg h-1 cm-2 (57,510 µg h-1 mgAg-1) and high Faradaic efficiency up to 97.7 %. Density functional theory calculations applied to uncover the catalytic mechanism of NO2- reduction reaction on Ag.
RESUMEN
Ambient ammonia synthesis by electroreduction of nitrate (NO3-) provides us a sustainable and environmentally friendly alternative to the traditional Haber-Bosch process. In this work, Mn2CoO4 nanoarray grown on carbon cloth (Mn2CoO4/CC) serves as a superior electrocatalyst for efficient NH3 synthesis by selective reduction of NO3-. When operated in 0.1 M PBS with 0.1 M NaNO3, Mn2CoO4/CC reaches a high Faraday efficiency of 98.6% and a large NH3 yield up to 11.19 mg/h/cm2. Moreover, it exhibits excellent electrocatalytic stability. Theory calculations show that the Mn2CoO4 surface has strong interaction with NO3-, which can effectively inhibit the occurrence of hydrogen evolution, beneficial for NO3--to-NH3 conversion.