RESUMEN
The lack of intrinsic active sites for photocatalytic CO2 reduction reaction (CO2RR) and fast recombination rate of charge carriers are the main obstacles to achieving high photocatalytic activity. In this work, a novel phosphorus and boron binary-doped graphitic carbon nitride, highly porous material that exhibits powerful photocatalytic CO2 reduction activity, specifically toward selective CO generation, is disclosed. The coexistence of Lewis-acidic and Lewis-basic sites plays a key role in tuning the electronic structure, promoting charge distribution, extending light-harvesting ability, and promoting dissociation of excitons into active carriers. Porosity and dual dopants create local chemical environments that activate the pyridinic nitrogen atom between the phosphorus and boron atoms on the exposed surface, enabling it to function as an active site for CO2RR. The P-N-B triad is found to lower the activation barrier for reduction of CO2 by stabilizing the COOH reaction intermediate and altering the rate-determining step. As a result, CO yield increased to 22.45 µmol g-1 h-1 under visible light irradiation, which is ≈12 times larger than that of pristine graphitic carbon nitride. This study provides insights into the mechanism of charge carrier dynamics and active site determination, contributing to the understanding of the photocatalytic CO2RR mechanism.
RESUMEN
A considerable amount of platinum (Pt) is required to ensure an adequate rate for the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries. Thus, the implementation of atomic Pt catalysts holds promise for minimizing the Pt content. In this contribution, atomic Pt sites with nitrogen (N) and phosphorus (P) co-coordination on a carbon matrix (PtNPC) are conceptually predicted and experimentally developed to alter the d-band center of Pt, thereby promoting the intrinsic ORR activity. PtNPC with a record-low Pt content (≈0.026â wt %) consequently shows a benchmark-comparable activity for ORR with an onset of 1.0 VRHE and half-wave potential of 0.85 VRHE . It also features a high stability in 15 000-cycle tests and a superior turnover frequency of 6.80â s-1 at 0.9 VRHE . Damjanovic kinetics analysis reveals a tuned ORR kinetics of PtNPC from a mixed 2/4-electron to a predominately 4-electron route. It is discovered that coordinated P species significantly shifts d-band center of Pt atoms, accounting for the exceptional performance of PtNPC.
RESUMEN
Spin state transitions and intermetallic charge transfers can essentially change material structural and physical properties while excluding external chemical doping. However, these two effects have rarely been found to occur sequentially in a specific material. In this article, we show the realization of these two phenomena in a perovskite oxide PbCoO3 with a simple ABO3 composition under high pressure. PbCoO3 possesses a peculiar A- and B-site ordered charge distribution Pb2+Pb4+3Co2+2Co3+2O12 with insulating behavior at ambient conditions. The high spin Co2+ gradually changes to low spin with increasing pressure up to about 15 GPa, leading to an anomalous increase of resistance magnitude. Between 15 and 30 GPa, the intermetallic charge transfer occurs between Pb4+ and Co2+ cations. The accumulated charge-transfer effect triggers a metal-insulator transition as well as a first-order structural phase transition toward a Tetra.-I phase at the onset of â¼20 GPa near room temperature. On further compression over 30 GPa, the charge transfer completes, giving rise to another first-order structural transformation toward a Tetra.-II phase and the reentrant electrical insulating behavior.
RESUMEN
The formation of water-stable aggregates in finely textured and polymineral magnetite Fe ore tailings is one of the critical processes in eco-engineering tailings into soil-like substrates as a new way to rehabilitate the tailings. Organic matter (OM) amendment and plant colonization are considered to be effective in enhancing water-stable aggregation, but the underlying mechanisms have not yet been elucidated. The present study aimed to characterize detailed changes in physicochemistry, Fe-bearing mineralogy, and organo-mineral interactions in magnetite Fe ore tailings subject to the combined treatments of OM amendment and plant colonization, by employing various microspectroscopic methods, including synchrotron-based X-ray absorption fine structure spectroscopy and nanoscale secondary ion mass spectroscopy. The results indicated that OM amendment and plant colonization neutralized the tailings' alkaline pH and facilitated water-stable aggregate formation. The resultant aggregates were consequences of ligand-promoted bioweathering of primary Fe-bearing minerals (mainly biotite-like minerals) and the formation of secondary Fe-rich mineral gels. Especially, the sequestration of OM (rich in carboxyl, aromatic, and/or carbonyl C) by Fe-rich minerals via ligand-exchange and/or hydrophobic interactions contributed to the aggregation. These findings have uncovered the processes and mechanisms of water-stable aggregate formation driven by OM amendment and plant colonization in alkaline Fe ore tailings, thus providing important basis for eco-engineered pedogenesis in the tailings.
Asunto(s)
Secuestro de Carbono , Óxido Ferrosoférrico , Minerales , Suelo , AguaRESUMEN
Quantitative structural parameters of pyrochlore Nd2Ru2O7, with temperature dependence, have been derived upon fitting XRD and EXAFS data. An anomalous expansion of the lattice parameter and the Ru-O bond length indicates a structural instability at low temperatures; in particular, an increase in the non-thermal term of the mean square fluctuation in the bond length is the evidence for a static disorder of Ru atoms. This static disorder is closely correlated with a decrease in the average Ru-O-Ru bond angle with decreasing temperature, favoring the short-range ferromagnetic coupling in the material. This ferromagnetic coupling formed thus triggered the spin frustration at low temperature when the contradictory constraints of antiferromagnetic interaction act upon the same Ru site in the corner-sharing tetrahedrons of pyrochlore Nd2Ru2O7. This study demonstrates that the spin frustration arising from the competition of ferromagnetic/antiferromagnetic interactions in pyrochlore Nd2Ru2O7 will cause structural instability especially on the atomic scale, which provides a new point of view to help understand its particular magnetic state.
RESUMEN
The complex metal oxide SrCo0.5Ru0.5O(3-δ) possesses a slightly distorted perovskite crystal structure. Its insulating nature infers a well-defined charge distribution, and the six-fold coordinated transition metals have the oxidation states +5 for ruthenium and +3 for cobalt as observed by X-ray spectroscopy. We have discovered that Co(3+) ion is purely high-spin at room temperature, which is unique for a Co(3+) in an octahedral oxygen surrounding. We attribute this to the crystal field interaction being weaker than the Hund's-rule exchange due to a relatively large mean Co-O distances of 1.98(2) Å, as obtained by EXAFS and X-ray diffraction experiments. A gradual high-to-low spin state transition is completed by applying high hydrostatic pressure of up to 40 GPa. Across this spin state transition, the Co Kß emission spectra can be fully explained by a weighted sum of the high-spin and low-spin spectra. Thereby is the much debated intermediate spin state of Co(3+) absent in this material. These results allow us to draw an energy diagram depicting relative stabilities of the high-, intermediate-, and low-spin states as functions of the metal-oxygen bond length for a Co(3+) ion in an octahedral coordination.
RESUMEN
Producing indispensable hydrogen and oxygen for social development via water electrolysis shows more prospects than other technologies. Although electrocatalysts have been explored for centuries, a universal activity descriptor for both hydrogen-evolution reaction (HER) and oxygen-evolution reaction (OER) is not yet developed. Moreover, a unifying concept is not yet established to simultaneously understand HER/OER mechanisms. Here, the relationships between HER/OER activities in three common electrolytes and over ten representative material properties on 12 3d-metal-based model oxides are rationally bridged through statistical methodologies. The orbital charge-transfer energy (Δ) can serve as an ideal universal descriptor, where a neither too large nor too small Δ (≈1 eV) with optimal electron-cloud density around Fermi level affords the best activities, fulfilling Sabatier's principle. Systematic experiments and computations unravel that pristine oxide with Δ ≈ 1 eV possesses metal-like high-valence configurations and active lattice-oxygen sites to help adsorb key protons in HER and induce lattice-oxygen participation in the OER, respectively. After reactions, partially generated metals in the HER and high-valence hydroxides in the OER dominate proton adsorption and couple with pristine lattice-oxygen activation, respectively. These can be successfully rationalized by the unifying orbital charge-transfer theory. This work provides the foundation of rational material design and mechanism understanding for many potential applications.
RESUMEN
Dissolved oxygen (DO) is a key parameter in assessing water quality, particularly in aquatic ecosystems. The oxygen reduction reaction (ORR) has notable prevalence in energy conversion and biological processes, including biosensing. Nevertheless, the long-term usage of the submersible DO sensors leads to undesirable biofilm formation on the electrode surface, deteriorating their sensitivity and stability. Recently, the reactive oxygen species (ROS), such as the two-electron pathway ORR byproduct, H2O2, had been known for its biofilm-degradation activity. Herein, for the first time, we reported N-doped reduced graphene oxide (N-rGO) for H2O2 selectivity as the self-antibiofouling DO sensor. Introducing foreign atom doping could reorient the electron network of graphene by the electronegativity gap, which facilitated highly selective and efficient two electron pathway of ORR. Mitigating the N content of N-rGO had enhanced the H2O2 selectivity (57.5%) and electron transfer number (n = 2.84) in neutral medium. Moreover, the N-rGO could be integrated to a wireless DO monitoring device that might realize an applicable device in the aquatic fish farming.
RESUMEN
Anionic redox is an effective way to increase the capacity of the cathode materials. Na2Mn3O7 [Na4/7[Mn6/7â¡1/7]O2, â¡ for the transition metal (TM) vacancies] with native and ordered TM vacancies can conduct a reversible oxygen redox and be a promising high-energy cathode material for sodium-ion batteries (SIBs). However, its phase transition at low potentials (â¼1.5 V vs Na+/Na) induces potential decays. Herein, magnesium (Mg) is doped on the TM vacancies to form a disordered Mn/Mg/â¡ arrangement in the TM layer. The Mg substitution suppresses the oxygen oxidation at â¼4.2 V by reducing the number of the Na-O-â¡ configurations. Meanwhile, this flexible disordering structure inhibits the generation of the dissolvable Mn2+ ions and mitigates the phase transition at â¼1.6 V. Therefore, the Mg doping improves the structural stability and its cycling performance in 1.5-4.5 V. The disordering arrangement endows Na0.49Mn0.86Mg0.06â¡0.08O2 with a higher Na+ diffusivity and improved rate performance. Our study reveals that oxygen oxidation is highly dependent on the ordering/disordering arrangements in the cathode materials. This work provides insights into the balance of anionic and cationic redox for enhancing the structural stability and electrochemical performance in the SIBs.
RESUMEN
Ecological engineering of soil formation in tailings is an emerging technology toward sustainable rehabilitation of iron (Fe) ore tailings landscapes worldwide, which requires the formation of well-organized and stable soil aggregates in finely textured tailings. Here, we demonstrate an approach using microbial and rhizosphere processes to progressively drive aggregate formation and development in Fe ore tailings. The aggregates were initially formed through the agglomeration of mineral particles by organic cements derived from microbial decomposition of exogenous organic matter. The aggregate stability was consolidated by colloidal nanosized Fe(III)-Si minerals formed during Fe-bearing primary mineral weathering driven by rhizosphere biogeochemical processes of pioneer plants. From these findings, we proposed a conceptual model for progressive aggregate structure development in the tailings with Fe(III)-Si rich cements as core nuclei. This renewable resource dependent eco-engineering approach opens a sustainable pathway to achieve resilient tailings rehabilitation without resorting to excavating natural soil resources.
RESUMEN
Designing efficient catalyst for the oxygen evolution reaction (OER) is of importance for energy conversion devices. The anionic redox allows formation of O-O bonds and offers higher OER activity than the conventional metal sites. Here, we successfully prepare LiNiO2 with a dominant 3d8L configuration (L is a hole at O 2p) under high oxygen pressure, and achieve a double ligand holes 3d8L2 under OER since one electron removal occurs at O 2p orbitals for NiIII oxides. LiNiO2 exhibits super-efficient OER activity among LiMO2, RMO3 (M = transition metal, R = rare earth) and other unary 3d catalysts. Multiple in situ/operando spectroscopies reveal NiIIIâNiIV transition together with Li-removal during OER. Our theory indicates that NiIV (3d8L2) leads to direct O-O coupling between lattice oxygen and *O intermediates accelerating the OER activity. These findings highlight a new way to design the lattice oxygen redox with enough ligand holes created in OER process.
RESUMEN
Owing to the low theoretical potential of the urea oxidation reaction (UOR), urea electrolysis is an energy-saving technique for the generation of hydrogen. Herein, a hierarchical structure of CuO nanowires decorated with nickel hydroxide supported on 3D Cu foam is constructed. Combined theoretical and experimental analyses demonstrate the high reactivity and selectivity of CuO and Ni(OH)2 toward the UOR instead of the oxygen evolution reaction. The hierarchical structure creates a synergistic effect between the two highly active sites, enabling an exceptional UOR activity with a record low potential of 1.334 V (vs the reversible hydrogen electrode) to reach 100 mA cm-2 and a low Tafel slope of 14 mV dec-1 in 1 m KOH and 0.5 m urea electrolyte. Assembling full urea electrolysis driven by this developed UOR electrocatalyst as the anode and a commercial Pt/C electrocatalyst as the cathode provides a current density of 20 mA cm-2 at a cell voltage of ≈1.36 V with promising operational stability for at least 150 h. This work not only enriches the UOR material family but also significantly advances energy-saving hydrogen production.
RESUMEN
Oxygen-based anionic redox reactions have recently emerged as a lever to increase the capacity of Mn-rich layered oxide cathodes in addition to the charge compensation based on cationic redox reactions for sodium-ion batteries. Unfortunately, the irreversibility of anionic redox often aggravates irreversible structure change and poor cycling performance. Here, a stable anionic redox is achieved through substituting Na ions by Mg ions in P2-type Na0.83 Li0.25 Mn0.75 O2 . Density functional theory (DFT) calculations reveal that Mg substitution effectively decreases the oxygen chemical potential, causing an improvement in lattice oxygen stability. Moreover, at a highly desodiated state, Mg ions that remain in the lattice and interact with O 2p orbitals can decrease the undercoordinated oxygen and the nonbonded, electron-deficient O 2p states, facilitating the reversibility of oxygen redox. When cycled in the voltage range of 2.6-4.5 V where only anionic redox occurs for charge compensation, Na0.773 Mg0.03 Li0.25 Mn0.75 O2 presents a much better reversibility, giving a 4 times better cycle stability than that of Na0.83 Li0.25 Mn0.75 O2 . Experimentally, Na0.773 Mg0.03 Li0.25 Mn0.75 O2 exhibits a ≈1.1% volume expansion during sodium insertion/extraction, suggestive of a "zero-strain" cathode. Overall, the work opens a new avenue for enhancing anionic reversibility of oxygen-related Mn-rich cathodes.
RESUMEN
Vacancies have been proved effective in activating the oxygen redox and stabilizing the structure of the oxide cathode materials for the Na-ion batteries, but their effect on the cathode materials of the Li-ion batteries is unclear. We herein show that they have similar effect on spinel [Li4/7Mn2/7â¡1/7]8a[Li4/7Mn10/7]16d[O4-x']32e.
RESUMEN
To reach a carbon-neutral future, electrochemical CO2 reduction reaction (eCO2RR) has proven to be a strong candidate for the next-generation energy system. Among potential materials, single-atom catalysts (SACs) serve as a model to study the mechanism behind the reduction of CO2 to CO, given their well-defined active metal centers and structural simplicity. Moreover, using metal-organic frameworks (MOFs) as supports to anchor and stabilize central metal atoms, the common concern, metal aggregation, for SACs can be addressed well. Furthermore, with their turnability and designability, MOF-derived SACs can also extend the scope of research on SACs for the eCO2RR. Herein, we synthesize sulfurized MOF-derived Mn SACs to study effects of the S dopant on the eCO2RR. Using complementary characterization techniques, the metal moiety of the sulfurized MOF-derived Mn SACs (MnSA/SNC) is identified as MnN3S1. Compared with its non-sulfur-modified counterpart (MnSA/NC), the MnSA/SNC provides uniformly superior activity to produce CO. Specifically, a nearly 30% enhancement of Faradaic efficiency (F.E.) in CO production is observed, and the highest F.E. of approximately 70% is identified at -0.45 V. Through operando spectroscopic characterization, the probing results reveal that the overall enhancement of CO production on the MnSA/SNC is possibly caused by the S atom in the local MnN3S1 moiety, as the sulfur atom may induce the formation of S-O bonding to stabilize the critical intermediate, *COOH, for CO2-to-CO. Our results provide novel design insights into the field of SACs for the eCO2RR.
RESUMEN
Ni-rich high-energy-density lithium ion batteries pose great risks to safety due to internal short circuits and overcharging; they also have poor performance because of cation mixing and disordering problems. For Ni-rich layered cathodes, these factors cause gas evolution, the formation of side products, and life cycle decay. In this study, a new cathode electrolyte interphase (CEI) for Ni2+ self-oxidation is developed. By using a branched oligomer electrode additive, the new CEI is formed and prevents the reduction of Ni3+ to Ni2+ on the surface of Ni-rich layered cathode; this maintains the layered structure and the cation mixing during cycling. In addition, this new CEI ensures the stability of Ni4+ that is formed at 100% state of charge in the crystal lattice at high temperature (660 K); this prevents the rock-salt formation and the over-reduction of Ni4+ to Ni2+. These findings are obtained using in situ X-ray absorption spectroscopy, operando X-ray diffraction, operando gas chromatography-mass spectroscopy, and X-ray photoelectron spectroscopy. Transmission electron microscopy reveals that the new CEI has an elliptical shape on the material surface, which is approximately 100 nm in length and 50 nm in width, and covers selected particle surfaces. After the new CEI was formed on the surface, the Ni2+ self-oxidation gradually affects from the surface to the bulk of the material. It found that the bond energy and bond length of the Ni-O are stabilized, which dramatically inhibit gas evolution. The new CEI is successfully applied in a Ni-rich layered compound, and the 18650- and the punch-type full cells are fabricated. The energy density of the designed cells is up to 300 Wh/kg. Internal short circuit and overcharging safety tests are passed when using the standard regulations of commercial evaluation. This new CEI technology is ready and planned for future applications in electric vehicle and energy storage.
RESUMEN
In this work, we aim to study zinc oxide (ZnO)-based functional materials over cotton fabrics and their effects after gamma ray exposure of 9 kGy. We found that the binding of the nanoparticles with cotton fabrics can be enhanced after irradiation. This could be due to the oxygen deficiency or defects created in the interface between ZnO and cotton fabrics after irradiation. Near-edge X-ray absorption fine structure and X-ray photoelectron spectroscopy (XPS) were used to detect the oxygen inadequacies generated in the interior and at the surface of the ZnO nanoparticles after gamma ray exposure. XPS results showed that the binding energy of Zn shifts by 2 eV at 1.5 kGy and by 4 eV at 9 kGy. This huge shift of about 4 eV is completely different from other works due to the reaction that takes place on the interface between ZnO nanostructures and cotton fabrics after gamma ray irradiation. Overall, this work suggests that after gamma ray irradiation, there is an enhanced level of binding between the coated functional nanoparticles and cotton fabrics, which can be advantageous for the textile industries.
RESUMEN
A novel bis-benzimidazole organic siloxane precursor (BBM-Si) was prepared, and was combined with tetraethylorthosilicate (TEOS) as a mixed Si source. Then, bridged periodic mesoporous organosilica (BBM-PMO) spherical nanoparticles were synthesized by co-condensation using cetyltrimethylammonium bromide (CTAB) as structure directing agent. The optical properties showed that BBM qualifies as an "aggregation induced emission enhanced" (AIEE) molecule, exhibiting characteristics of excited-state intramolecular proton transfer (ESIPT), such as a large Stokes shift and dual fluorescence emission. For the BBM-PMO materials, the silica skeleton provides a rigid environment that limits molecular rotation, resulting in improved fluorescence emission. In particular, the BBM-PMOs exhibited dual emission of the enol and keto forms, achieving a ratiometric response to Cu2+ with high sensitivity and selectivity in a broad pH range. Additionally, the limit of detection was as low as 7.15 × 10-9 M in aqueous solution. The X-ray absorption near-edge spectroscopy (XANES) showed the coordination structure through the interaction between copper ions and N atoms of benzimidazole in the BBM-PMO coordinated to Cu2+. These results demonstrate that BBM-PMO hybrid materials have potential applications in the fields of bio-imaging and environmental monitoring.
RESUMEN
Self-terminated oligomer additives synthesized from bismaleimide and barbituric acid derivatives improve the safety and performance of lithium-ion batteries (LIBs). This study investigates the interface interaction of these additives and the cathode material. Two additives were synthesized by Michael addition (additive A) and aza-Michael addition (additive B). The electrochemical performances of bare and modified LiNi0.6Mn0.2Co0.2O2 (NMC622) materials are studied. The cycling stability and rate capability of NMC622 considerably improve on surface modification with additive B. According to the differential scanning calorimetry results, the exothermic heat of fully deliathiated NMC622 is dramatically decreased through surface modification with both additives. The electrode surface kinetics and interface interaction phenomena of the additives are determined through surface plasma resonance measurements in operando gas chromatography-mass spectroscopy (GCMS) and in situ soft X-ray absorption spectroscopy (XAS). The binding rate constant of additive B onto NMC622 particles is 1.2-2.3 × 104 M-1 s-1 in the temperature range of 299-311 K, which is ascribed to the strong binding affinity toward the electrode surface. This affinity enhances Li+ diffusion, which allows the electrode modified by additive B to provide high electrochemical performance with superior thermal stability. In operando GCMS reveals that gas evolution due to the electrolyte degradation at the NMC622 surface contributes to safety hazards in the bare NMC622 material. In situ soft XAS indicates the occurrence of structural transformation in the bare NMC622 material after it is fully charged and at elevated temperatures. The NMC622 material is stabilized by incorporating additives. The unique performance of additive B can be attributed to its linear structure that allows superior electrode surface adhesion compared with that of additive A. Therefore, this study presents an optimized working principle of self-terminated oligomers, which can be developed and applied to improve the safety and performance of LIBs.
RESUMEN
We report the influence of Mn dopant on magnetic properties of Zn0.95Mn0.05O (ZMO)/Al2O3(0 0 0 1) hetero-epitaxial systems grown by using pulsed-laser deposition. The room temperature (RT) intrinsic ferromagnetic (FM) ordering verified by superconducting quantum interference device magnetometer and x-ray magnetic circular dichroism spectrum of Mn L 2,3 edges is ascribed to the substitutional Mn atoms in the Zn site of ZnO. Mn in ZMO has a tetrahedral local symmetry instead of the octahedral symmetry of MnO, after verifying the absence of the Mn-related impurities or clusters in ZMO epitaxial film by Mn K-edge and Zn K-edge x-ray absorption spectroscopy spectrum, as well as the analysis of long-range structural ordering on Renninger scan of forbidden (0 0 0 5) reflection in x-ray diffraction, transmission electron microscopy and Raman spectrum. Comparison of x-ray absorption spectra of ZMO with those of ZnO epilayers at O K-, Zn K-, and L 3-edges indicates that the substitution of the Zn site with Mn enhances the charge-transfer (CT) transition and the presence of Zn vacancies (VZn) also dominate the photoluminescence (PL) spectrum, implying that the formation of numerous VZn defects plays an important role in activating FM interactions. The strong CT effect and the existence of high-density VZn suggest that the intrinsic RT FM ordering of insulating ZMO is a result of the formation of the bound magnetic polarons (BMPs) that interact with each other via intermediate magnetic impurities.