The Mechanism of Rh(I)-Catalyzed Coupling of Benzotriazoles and Allenes Revisited: Substrate Inhibition, Proton Shuttling, and the Role of Cationic vs Neutral Species.

Direct coupling of benzotriazole to unsaturated substrates such as allenes represents an atom-efficient method for the construction of biologically and pharmaceutically interesting functional structures. In this work, the mechanism of the N2-selective Rh complex-catalyzed coupling of benzotriazoles to allenes was investigated in depth using a combination of experimental and theoretical techniques. Substrate coordination, inhibition, and catalyst deactivation was probed in reactions of the neutral and cationic catalyst precursors [Rh(µ-Cl)(DPEPhos)]2 and [Rh(DPEPhos)(MeOH)2]+ with benzotriazole and allene, giving coordination, or coupling of the substrates. Formation of a rhodacycle, formed by unprecedented 1,2-coupling of allenes, is responsible for catalyst deactivation. Experimental and computational data suggest that cationic species, formed either by abstraction of the chloride ligand or used directly, are relevant for catalysis. Isomerization of benzotriazole and cleavage of its N-H bond are suggested to occur by counteranion-assisted proton shuttling. This contrasts with a previously proposed scenario in which oxidative N-H addition at Rh is one of the key steps. Based on the mechanistic analysis, the catalytic coupling reaction could be optimized, leading to lower reaction temperature and shorter reaction times compared to the literature.

Catalyst Deactivation During Rhodium Complex-Catalyzed Propargylic C-H Activation.

Detailed mechanistic investigations on our previously reported synthesis of branched allylic esters by the rhodium complex-catalyzed propargylic C-H activation have been carried out. Based on initial mechanistic studies, we present herein more detailed investigations of the reaction mechanism. For this, various analytical (NMR, X-ray crystal structure analysis, Raman) and kinetic methods were used to characterize the formation of intermediates under the reaction conditions. The knowledge obtained by this was used to further optimize the previous conditions and generate a more active catalytic system.

Dehydropolymerisation of Methylamine Borane and an N-Substituted Primary Amine Borane Using a PNP Fe Catalyst.

Dehydropolymerisation of methylamine borane (H3 B⋅NMeH2 ) using the well-known iron amido complex [(PNP)Fe(H)(CO)] (PNP=N(CH2 CH2 PiPr2 )2 ) (1) gives poly(aminoborane)s by a chain-growth mechanism. In toluene, rapid dehydrogenation of H3 B⋅NMeH2 following first-order behaviour as a limiting case of a more general underlying Michaelis-Menten kinetics is observed, forming aminoborane H2 B=NMeH, which selectively couples to give high-molecular-weight poly(aminoborane)s (H2 BNMeH)n and only traces of borazine (HBNMe)3 by depolymerisation after full conversion. Based on a series of comparative experiments using structurally related Fe catalysts and dimethylamine borane (H3 B⋅NMe2 H) polymer formation is proposed to occur by nucleophilic chain growth as reported earlier computationally and experimentally. A silyl functionalised primary borane H3 B⋅N(CH2 SiMe3 )H2 was studied in homo- and co-dehydropolymerisation reactions to give the first examples for Si containing poly(aminoborane)s.

Insight into the Activation of In Situ Generated Chiral RhI Catalysts and Their Application in Cyclotrimerizations.

We report a detailed study concerning the efficient generation of highly active chiral rhodium complexes of the general structure [Rh(diphosphine)(solvent)2 ]+ as well as their exemplary successful utilization as catalysts for cyclotrimerizations. Such solvent complexes could likewise be prepared from novel ammonia complexes of the type [Rh(diphosphine)(NH3 )2 ]+ . A valuable, feasible approach to generate novel chiral RhI complexes was found by in situ generation from Wilkinson's catalyst [RhCl(PPh3 )3 ] with chiral P,N ligands. The generated catalysts led to moderate to good enantioselectivities and excellent yields in the cyclotrimerizations of triynes, showcasing their usefulness in the synthesis of axially chiral benzene derivatives.

Mechanistic investigations of the rhodium catalyzed propargylic CH activation.

Previously we reported the redox-neutral atom economic rhodium catalyzed coupling of terminal alkynes with carboxylic acids using the DPEphos ligand. We herein present a thorough mechanistic investigation applying various spectroscopic and spectrometric methods (NMR, in situ-IR, ESI-MS) in combination with DFT calculations. Our findings show that in contrast to the originally proposed mechanism, the catalytic cycle involves an intramolecular protonation and not an oxidative insertion of rhodium in the OH bond of the carboxylic acid. A σ-allyl complex was identified as the resting state of the catalytic transformation and characterized by X-ray crystallographic analysis. By means of ESI-MS investigations we were able to detect a reactive intermediate of the catalytic cycle.

New pentacoordinated rhodium species as unexpected products during the in situ generation of dimeric diphosphine-rhodium neutral catalysts.

Dimeric rhodium complexes of the type [Rh(PP)(µ2 -Cl)]2 (PP=diphosphine) are often used as precatalysts and are generated "in situ" from the corresponding diolefin complexes by exchange of the diene with the desired diphosphine. Herein, we report that the "in situ" procedure also leads to unexpected monomeric pentacoordinated neutral complexes of the type [RhCl(PP)(diolefin)], for the first time herein characterized by NMR spectroscopy and X-ray crystallography for the ligands 1,4-bis(diphenylphosphino)propane (DPPP), 1,4-bis(diphenylphosphino)butane (DPPB), and 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl (BINAP). The pentacoordinated complexes are in equilibrium with the dimeric target compound [Rh(PP)(µ2 -Cl)]2 . The equilibrium is influenced by the rhodium-diolefin precursor, the solvent and the temperature. Based on the results of NMR and UV/Vis spectroscopic analysis (kinetics) it could be shown that the pentacoordinated complex [RhCl(PP)(diolefin)] may arise both from the "in situ"-generated neutral complex [Rh(PP)(µ2 -Cl)] by reaction with the free diolefin and, more surprisingly, directly from [Rh(diolefin)(µ2 -Cl)]2 and the diphosphine.

Development of an improved rhodium catalyst for z-selective anti-markovnikov addition of carboxylic acids to terminal alkynes.

To develop more active catalysts for the rhodium-catalyzed addition of carboxylic acids to terminal alkynes furnishing anti-Markovnikov Z enol esters, a thorough study of the rhodium complexes involved was performed. A number of rhodium complexes were characterized by NMR, ESI-MS, and X-ray analysis and applied as catalysts for the title reaction. The systematic investigations revealed that the presence of chloride ions decreased the catalyst activity. Conversely, generating and applying a mixture of two rhodium species, namely, [Rh(DPPMP)2][H(benzoate)2] (DPPMP=diphenylphosphinomethylpyridine) and [{Rh(COD)(µ2-benzoate)}2], provided a significantly more active catalyst. Furthermore, the addition of a catalytic amount of base (Cs2CO3) had an additional accelerating effect. This higher catalyst activity allowed the reaction time to be reduced from 16 to 1-4 h while maintaining high selectivity. Studies on the substrate scope revealed that the new catalysts have greater functional-group compatibility.

Investigations into the formation and stability of cationic rhodium diphosphane η6-arene complexes.

Rhodium-η(6)-arene complexes can be generated in the presence of arenes following the hydrogenation of the diolefin in rhodium catalyst precursors of the type [Rh(PP*)(diolefin)]X (PP* = chelating diphosphane, X = noncoordinating anion). In this paper we report the characterization of such arene complexes with the ligands DuPhos, dipamp, dppe, Tangphos, dppf, and diop by means of NMR spectroscopy ((31)P, (103)Rh) and X-ray analysis. A procedure that follows the approach to equilibrium as a function of time monitored by using an UV/Vis diode array was used to determine 20 stability constants. Analyses were accomplished directly from the spectra by either a numeric and/or a new analytic solution of the underlying system of differential equations. Additionally thermodynamic parameters were determined in the temperature range between 278 and 318 K.

3 d metal ions in highly unusual eight-coordination: the phosphate-capped dodecapalladate(II) nanocube.

Trapped in a noble cube: A novel family of noble metalates has been discovered in which a 3d metal ion M (M = Mn(II), Fe(III), Co(II), Cu(II), Zn(II)) is encapsulated by a 12 palladium-oxo cage {Pd(12)O(32)}, which is capped by eight phosphate groups. Such discrete nanocubes were further investigated by EPR spectroscopy, electrochemistry, and in homogeneous hydrogenation catalysis.

Molecular vibration spectroscopy studies on novel trinuclear rhodium-7-hydride complexes of the general type {[Rh(PP*)X]3(µ(2-X)3(µ3-X)}(BF4)2 (X = H, D).

Novel trinuclear rhodium-hydride complexes with diphosphine ligands Tangphos, t-Bu-BisP*, and Me-DuPHOS which contain bridging µ(2)- and µ(3)-hydrides as well as terminal hydrides in one molecule have been reported recently. In this work, these different rhodium-hydride bonds are characterized by Raman spectroscopy and the results are compared with those obtained by means of the more commonly applied IR spectroscopy. Density functional theory (DFT) calculations have been carried out to support the experimental findings. The structure of the Rh(3)H(7) core is described in the context of their vibrational stretching modes.

(+)-Chlorido[(1,2,3,4-η;κP)-2'-diphenyl-phosphanyl-2-diphenyl-phosphoryl-1,1'-binaphth-yl]rhodium(I) methanol monosolvate.

In the title complex, [RhCl(C(44)H(32)OP(2))]·CH(3)OH, the Rh(I) ion is coordinated by a naphthyl group of a partially oxidized 2,2'-bis-(diphenyl-phosphan-yl)-1,1'-binaphthyl (BINAP) ligand in a η(4) mode, one P atom of the diphenyl-phosphanyl group and one Cl atom. The P=O group does not inter-act with the Rh(I) ion but accepts an O-H⋯O hydrogen bond from the methanol solvent mol-ecule.

How solvents affect the stability of cationic Rh(I) diphosphine complexes: a case study of MeCN coordination.

Cationic rhodium(I) diphosphine complexes, referred to as Schrock-Osborn catalysts, are privileged homogeneous catalysts with a wide range of catalytic applications. The coordination of solvent molecules can have a significant influence on reaction mechanisms and kinetic scenarios. Although solvent binding is well documented for these rhodium species, comparative quantifications for structurally related systems are not available to date. We present a method for systematic investigation and quantification of this important parameter, using MeCN which replaces diolefins and forms stable Rh(I) MeCN complexes. Using UV-vis and 31P{1H} NMR spectroscopy we determine and compare stability constants of different [Rh(PP)(NBD)]BF4 and [Rh(PP)(COD)]BF4 complexes (PP = diphosphine; COD = 1,5-cyclooctadiene; NBD = 2,5-norbornadiene) and discuss the influence of PP ligands and reaction temperature. A DFT study reveals the dependence of the stability on the thermodynamics of the exchange reaction. Using variable temperature NMR spectroscopy, the first mixed solvate complex could be verified as an intermediate in the MeCN-MeOH exchange.

Unravelling the reaction path of rhodium-MonoPhos-catalysed olefin hydrogenation.

The mechanism of the asymmetric hydrogenation of methyl (Z)-2-acetamidocinnamate (mac) catalysed by [Rh(MonoPhos)(2)(nbd)]SbF(6) (MonoPhos: 3,5-dioxa-4-phosphacyclohepta[2,1-a:3,4-a']dinaphthalen-4-yl)dimethylamine) was elucidated by using (1)H, (31)P and (103)Rh NMR spectroscopy and ESI-MS. The use of nbd allows one to obtain in pure form the rhodium complex that contains two units of the ligand. In contrast to the analogous complexes that contain cis,cis-1,5-cyclooctadiene (cod), this complex shows well-resolved NMR spectroscopic signals. Hydrogenation of these catalyst precursors at 1 bar total pressure gave rise to the formation of a bimetallic complex of general formula [Rh(MonoPhos)(2)](2)(SbF(6))(2); no solvate complexes were detected. In the dimeric complex both rhodium atoms are ligated to two MonoPhos ligands but, in addition, each rhodium atom also binds to one of the binaphthyl rings of a ligand that is bound to the other rhodium metal. Upon addition of mac, a mixture of diastereomeric complexes [Rh(MonoPhos)(2)(mac)]SbF(6) is formed in which the substrate is bound in a chelate fashion to the metal. Upon hydrogenation, these adducts are converted into a new complex [Rh(MonoPhos)(2){mac(H)(2)}]SbF(6) in which the methyl phenylalaninate mac(H)(2) is bound through its aromatic ring to rhodium. Addition of mac to this complex leads to displacement of the product by the substrate. No hydride intermediates could be detected and no evidence was found for the involvement at any stage of the process of complexes with only one coordinated MonoPhos. The collected data suggest that the asymmetric hydrogenation follows a Halpern-like mechanism in which the less abundant substrate-catalyst adduct is preferentially hydrogenated to phenylalanine methyl ester.

Influence of process parameters on the reaction kinetics of the chromium-catalyzed trimerization of ethylene.

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl(3)(thf)(3)] (thf=tetrahydrofuran), a Ph(2)P-N(iPr)-P(Ph)-N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt(3)) as activator. It could be shown that the initial activity shows a first-order dependency on the ethylene concentration. Also, a first-order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol(-1). At elevated temperatures (ca. 80 degrees C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt(3). After a fast initial phase, a pronounced 'kink' in the ethylene-uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.

(+)-{1,2-Bis[(2R,5R)-2,5-dimethyl-phospho-lan-1-yl]ethane-κP,P'}(η-cyclo-octa-1,5-diene)rhodium(I) tetra-fluorido-borate.

The title compound, [Rh(C(8)H(12))(C(14)H(28)P(2))]BF(4), exhibits a rhodium(I) complex cation with a bidentate bis-phosphine ligand and a bidentate η(2),η(2)-coordinated cyclo-octa-1,5-diene. Together the ligands create a slightly distorted square-planar cordination environment for the Rh(I) atom. There are three mol-ecules in the asymmetric unit and intra-molecular P-Rh-P bite angles of 82.78 (5), 82.97 (6) and 83.09 (5)° are observed. The dihedral angles between the P-Rh-P and the X-Rh-X planes (X is the centroid of a double bond) are 14.7 (1), 14.8 (1) and 15.3 (1)°. The structure exhibits disorder of one cyclo-octa-diene ligand as well as one BF(4) anion.

(+)-{1,2-Bis[(2R,5R)-2,5-diethyl-phospho-lan-1-yl]ethane-κP,P'}(η-cyclo-octa-1,5-diene)rhodium(I) tetra-fluoridoborate.

The title compound, [Rh(C(8)H(12))(C(18)H(36)P(2))]BF(4), exhibits a rhodium(I) complex cation with a bidentate bis-phosphine ligand and a bidentate η(2),η(2)-coordinated cyclo-octa-1,5-diene ligand. The ligands form a slightly distorted square-planar coordination environment for the Rh(I) atom. An intra-molecular P-Rh-P bite angle of 83.91 (2)° is observed. The dihedral angle between the P-Rh-P and the X-Rh-X planes (X is the centroid of a double bond) is 14.0 (1)°. The BF(4) anion is disordered over two positions in a 0.515 (7):0.485 (7) ratio.

Combination of spectroscopic methods: in situ NMR and UV/Vis measurements to understand the formation of group 4 metallacyclopentanes from the corresponding metallacyclopropenes.

By reaction of the dichloride rac-(ebthi)HfCl(2) [ebthi = 1,2-ethylene-1,1'-bis(eta(5)-tetrahydroindenyl)] with lithium in the presence of bis(trimethylsilyl)acetylene, the hafnacyclopropene rac-(ebthi)Hf(eta(2)-Me(3)SiC(2)SiMe(3)) (1-Hf) was obtained. The reaction of the blue-green complex 1-Hf with an excess of ethylene at room temperature leads by insertion of the olefin to the yellow-green hafnacyclopentene 2-Hf which is only stable in solution and eliminates the alkyne at 100 degrees C under ethylene to form the corresponding yellow hafnacyclopentane 3-Hf, which was characterized by X-ray crystal structure analysis. The reaction of 1-Hf to give stepwise via 2-Hf the complex 3-Hf was investigated in detail and compared to the formation and stability of the corresponding zirconacyclopropene 1-Zr, zirconacyclopentene 2-Zr, and zirconacyclopentane 3-Zr. Moreover, the reaction of the titanocene alkyne complex 1-Ti with ethylene was studied. For investigating the reaction behavior of the alkyne complexes 1-M, NMR spectroscopy was used and the results were compared with UV/vis spectroscopy, suggesting the existence of a bis-pi-complex prior to the formation of the hafnacyclopentene 2-Hf.

Two precatalysts for application in propargylic CH activation.

The complexes {bis[(2-diphenylphosphanyl)phenyl] ether-κ2P,P'}(η4-norbornadiene)rhodium(I) tetrafluoridoborate, [Rh(C7H8)(C36H28OP2)]BF4, and {bis[(2-diphenylphosphanyl)phenyl] ether-κ2P,P'}[η4-(Z,Z)-cycloocta-1,5-diene]rhodium(I) tetrafluoridoborate dichloromethane monosolvate, [Rh(C8H12)(C36H28OP2)]BF4·CH2Cl2, are applied as precatalysts in redox-neutral atomic-economic propargylic CH activation [Lumbroso et al. (2013). Angew. Chem. Int. Ed. 52, 1890-1932]. In addition, the catalytically inactive pentacoordinated 18-electron complex {bis[(2-diphenylphosphanyl)phenyl] ether-κ2P,P'}chlorido(η4-norbornadiene)rhodium(I), [RhCl(C7H8)(C36H28OP2)], was synthesized, which can form in the presence of chloride in the reaction system.

Diffusion ordered NMR spectroscopy measurements as screening method of potential reactions of API and excipients in drug formulations.

In the development of new pharmaceutical formulations it is important to consider the possible interactions between the active pharmaceutical ingredient (API) and excipients which is a well-known problem. The objective of the work presented here was to investigate such reactions by means of diffusion ordered NMR spectroscopy (DOSY). The known reaction of 5-aminosalicylic acid (5-ASA) and the excipient citric acid was studied. Three reaction products have been verified by DOSY, 1H NMR and HPLC measurements. Despite a poor separation in the DOSY diagram, the reaction products could be assign due to the processing of thoughtful selected parts of the signals. The reaction of 5-ASA with formic acid and benzocaine with dibutyl phthalate was also studied by means of DOSY experiments.

Two precatalysts for application in asymmetric homogeneous hydrogenation.

The title compounds, [(1R,1'R,2R,2'R)-2,2'-bis(diphenylphosphanyl)-1,1'-dicyclopentane](η(4)-norbornadiene)rhodium(I) tetrafluoridoborate, [Rh(C34H36P2)(C7H8)]BF4, (I), and [(1R,1'R,2R,2'R)-2,2'-bis(diphenylphosphanyl)-1,1'-dicyclopentane][η(4)-(Z,Z)-cycloocta-1,5-diene]rhodium(I) tetrafluoridoborate dichloromethane monosolvate, [Rh(C34H36P2)(C8H12)]BF4·CH2Cl2, (II), are applied as precatalysts in asymmetric homogeneous hydrogenation, e.g. in the reduction of dehydroamino acids, affording excellent enantiomeric excesses [Zhu, Cao, Jiang & Zhang (1997). J. Am. Chem. Soc. 119, 1799-1800].