Removal of methyl orange dye and copper (II) ions from aqueous solution using polyaniline-coated kapok (Ceiba pentandra) fibers.

Hollow tubular structured kapok fibers (Ceiba pentandra) were coated with polyaniline (PANI) molecules using an in situ oxidative polymerization technique. The tubular morphology of the kapok fibers was retained after PANI coating. The Fourier transform infrared (FT-IR) spectrum of the PANI-coated kapok fibers illustrated the vibration modes associated with the presence of PANI molecules. The PANI-treated kapok fibers achieved complete wettability with water molecules (zero water contact angle) from initially being highly hydrophobic (contact angle = 120°). In the present work, the removal of contaminants such as methyl orange dye and Cu(II) from aqueous solution using polyaniline-coated kapok fibers was investigated. Isotherm studies show that the removal of methyl orange dye (R2 ≥ 0.959) and Cu(II) (R2 ≥ 0.972) using PANI-coated kapok fibers follow the Langmuir isotherm model with maximum sorption capacities determined to be 75.76 and 81.04 mg/g, respectively. Based from thermodynamic studies, the sorption of methyl orange dye and Cu(II) are endothermic, feasible and spontaneous. Furthermore, kinetic studies show that the both processes follow a pseudo-second-order model, implying that the rate-determining step is chemisorption.

Oil Adsorption Kinetics of Calcium Stearate-Coated Kapok Fibers.

This study used a simple and efficient dipping method to prepare oleophilic calcium stearate-coated kapok fibers (CaSt2-KF) with improved hydrophobicity. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed the deposition of calcium stearate particles on the surface of the kapok fibers. This led to higher surface roughness and improved static water contact angle of 137.4°. The calcium stearate-coated kapok fibers exhibited comparable sorption capacities for kerosene, diesel, and palm oil. However, the highest sorption capacity of 59.69 g/g was observed for motor oil at static conditions. For motor oil in water, the coated fibers exhibited fast initial sorption and a 65% removal efficiency after 30 s. At equilibrium, CaSt2-KF attained a sorption capacity of 33.9 g/g and 92.5% removal efficiency for motor oil in water. The sorption kinetics of pure motor oil and motor oil in water follows the pseudo-second-order kinetic model, and the Elovich model further described chemisorption. Intraparticle diffusion and liquid film diffusion were both present, with the latter being the predominant diffusion mechanism during motor oil sorption.