RESUMEN
Molybdenum disulfide (MoS2) has been regarded as one of the most important n-type two-dimensional (2D) transition metal dichalcogenide semiconductors for nanoscale electron devices. Relatively high contact resistance (RC) remains as an issue in the 2D-devices yet to be resolved. Reliable technique is very compelling to practically produce low RC values in device electronics, although scientific approaches have been made to obtain a record-low RC. To resolve this practical issue, we here use thermal-evaporated ultrathin LiF between channel and source/drain metal to fabricate 2D-like MoS2 field effect transistors (FETs) with minimum RC. Under 4-bar FET method, RC less than â¼600 Ω·µm is achieved from the LiF/Au contact MoS2 FET. Our normal 2-bar FET with LiF thus shows the same mobility as that of 4-bar FET that should have no RC in principle. On the basis of these results, ultrathin LiF is also applied for transparent conducting oxide contact, successfully enabling transparent MoS2 FETs.
RESUMEN
E-government services have emerged and expanded for the last decades. The digitalization of social services presents both an opportunity and a challenge to the aging population who are effectively digital immigrants. This study examined socioeconomic factors associated with e-government services awareness and usage among the aging population, with a focus on the comparison between baby boomers and older adults. Data came from the 2015 E-Government Services Usage Survey, a nationally representative survey in South Korea (N = 1,255). The results showed a cohort difference in e-government services usage as 69.3% of baby boomers vs. 34.9% of older adults. The logistic regression results also suggested differences in factors associated with e-government services awareness and levels of use by cohort. Household income was positively associated with awareness among baby boomers, while age was negatively associated with awareness among older adults. The findings imply that gerontological social workers need to advocate for senior citizens by urging the government to pay more attention to the issues of digital exclusion faced by the majority of the current cohort of older adults as well as subgroups of baby boomers - in particular those who are economically marginalized.
Asunto(s)
Gobierno , Internet , Crecimiento Demográfico , Anciano , Estudios de Cohortes , Femenino , Humanos , Masculino , Persona de Mediana Edad , República de Corea , Factores Socioeconómicos , Encuestas y CuestionariosRESUMEN
Monoclinic semiconducting ß-Ga2O3 has drawn attention, particularly because its thin film could be achieved via mechanical exfoliation from bulk crystals, which is analogous to van der Waals materials' behavior. For the transistor devices with exfoliated ß-Ga2O3, the channel direction becomes [010] for in-plane electron transport, which changes to vertical [100] near the source/drain (S/D) contact. Hence, anisotropic transport behavior is certainly worth to study but rarely reported. Here we achieve the vertical [100] direction electron mobility of 4.18 cm2/(V s) from Pt/ß-Ga2O3 Schottky diodes with various thickness via radio frequency-transmission line method (RF-TLM), which is recently developed. The specific contact resistivity (ρc) could also be estimated from RF-TLM, to be 4.72 × 10-5 Ω cm2, which is quite similar to the value (5.25 × 10-5 Ω cm2) from conventional TLM proving the validity of RF-TLM. We also fabricate metal-semiconductor field-effect transistors (MESFETs) to study anisotropic transport behavior and contact resistance (RC). RC-free [010] in-plane mobility appears as high as maximum â¼67 cm2/(V s), extracted from total resistance in MESFETs.
RESUMEN
Two-dimensional transition metal dichalcogenides (2D TMDCs) are considered promising alternatives to Si as channel materials because of the possibility of retaining their superior electronic transport properties even at atomic body thicknesses. However, the realization of high-performance 2D TMDC field-effect transistors remains a challenge owing to Fermi-level pinning (FLP) caused by gap states and the inherent high Schottky barrier height (SBH) within the metal contact and channel layer. This study demonstrates that high-quality van der Waals (vdW) heterojunction-based contacts can be formed by depositing semimetallic TiS2 onto monolayer (ML) MoS2. After confirming the successful formation of a TiS2/ML MoS2 heterojunction, the contact properties of vdW semimetal TiS2 were thoroughly investigated. With clean interfaces of the TiS2/ML MoS2 heterojunctions, atomic-layer-deposited TiS2 can induce gap-state saturation and suppress FLP. Consequently, compared with conventional evaporated metal electrodes, the TiS2/ML MoS2 heterojunctions exhibit a lower SBH of 8.54 meV and better contact properties. This, in turn, substantially improves the overall performance of the device, including its on-current, subthreshold swing, and threshold voltage. Furthermore, we believe that our proposed strategy for vdW-based contact formation will contribute to the development of 2D materials used in next-generation electronics.
RESUMEN
Extensive study on 2D van der Waals (vdW) heterojunctions has primarily focused on PN diodes for fast-switching photodetection, while achieving the same from 2D channel phototransistors is rare despite their other advantages. Here, a high-speed phototransistor featuring a type III junction between p-MoTe2 channel and n-SnS2 top layer is designed. The photodetecting device operates with a basis of negative photoresponse (NPR), which originates from the recombination of photoexcited electrons in n-SnS2 and accumulated holes in the p-MoTe2 channel. For the NPR to occur, high-energy photons capable of exciting SnS2 (band gap ≈2.2 eV) are found to be effective because lower-energy photons simply penetrate the SnS2 top layer only to excite MoTe2 , leading to normal positive photoresponse (PPR) which is known to be slow due to the photogating effects. The NPR transistor showcases 0.5 ms fast photoresponses and a high responsivity over 5000 A W-1 . More essentially, such carrier recombination mechanism is clarified with three experimental evidences. The phototransistor is finally modified with Au contact on n-SnS2 , to be a more practical device displaying voltage output. Three different photo-logic states under blue, near infrared (NIR), and blue-NIR mixed photons are demonstrated using the voltage signals.
RESUMEN
Graphene, with superior electrical tunabilities, has arisen as a multifunctional insertion layer in vertically stacked devices. Although the role of graphene inserted in metal-semiconductor junctions has been well investigated in quasi-static charge transport regime, the implication of graphene insertion at ultrahigh frequencies has rarely been considered. Here, we demonstrate the diode operation of vertical Pt/n-MoSe2/graphene/Au assemblies at ~200-GHz cutoff frequency (fC). The electric charge modulation by the inserted graphene becomes essentially frozen above a few GHz frequencies due to graphene quantum capacitance-induced delay, so that the Ohmic graphene/MoSe2 junction may be transformed to a pinning-free Schottky junction. Our diodes exhibit much lower total capacitance than devices without graphene insertion, deriving an order of magnitude higher fC, which clearly demonstrates the merit of graphene at high frequencies.
RESUMEN
Highly crystalline 2D/3D-mixed p-transition metal dichalcogenide (TMD)/n-Ga2 O3 heterojunction devices are fabricated by mechanical exfoliation of each p- and n-type material. N-type ß-Ga2 O3 and p-type TMD separately play as a channel for junction field effect transistors (JFETs) with each type of carriers as well as materials for a heterojunction PN diode. The work thus mainly focuses on such ambipolar channel transistors with two different types of channel in a single device architecture. For more extended applications, the transparency of high energy band gap ß-Ga2 O3 (Eg ≈ 4.8 eV) is taken advantage of, firstly to measure the electrical energy gap of p-TMDs receiving visible or near infrared (NIR) photons through the ß-Ga2 O3 . Next, the p-TMD/n-Ga2 O3 JFETs are put to high speed photo-sensing which is achieved from the p-TMD channel under reverse bias voltages on n-Ga2 O3 . The photo-switching cutoff frequency appears to be ≈16 and 29 kHz for visible red and NIR illuminations, respectively, on the basis of -3 dB photoelectric power loss. Such a high switching speed of the JFET is attributed to the fast transport of photo-carriers in TMD channels. The 2D/3D-mixed ambipolar channel JFETs and their photo-sensing applications are regarded novel, promising, and practically easy to achieve.
RESUMEN
Polarization-sensitive photodetection has attracted considerable attention as an emerging technology for future optoelectronic applications such as three-dimensional (3D) imaging, quantum optics, and encryption. However, traditional photodetectors based on Si or III-V InGaAs semiconductors cannot directly detect polarized light without additional optical components. Herein, we demonstrate a self-powered linear-polarization-sensitive near-infrared (NIR) photodetector using a two-dimensional WSe2/ReSe2 van der Waals heterostructure. The WSe2/ReSe2 heterojunction photodiode with semivertical geometry exhibits excellent performance: an ideality factor of 1.67, a broad spectral photoresponse of 405-980 nm with a significant photovoltaic effect, outstanding linearity with a linear dynamic range wider than 100 dB, and rapid photoswitching behavior with a cutoff frequency up to 100 kHz. Strongly polarized excitonic transitions around the band edge in ReSe2 lead to significant 980 nm NIR linear-polarization-dependent photocurrent. This linear polarization sensitivity remains stable even after exposure to air for longer than five months. Furthermore, by leveraging the NIR (980 nm)-selective linear polarization detection of this photodiode under photovoltaic operation, we demonstrate digital incoherent holographic 3D imaging.
RESUMEN
Two-dimensional (2D) transition metal dichalcogenide (TMD) hetero PN junctions with a van der Waals (vdW) interface have received much attention, because PN diodes are basically important to control the vertical current across the junction. Interestingly, the same vdW PN junction structure can be utilized for junction field-effect transistors (JFETs) where in-plane current is controlled along the junction. However, 2D vdW JFETs seem rarely reported, despite their own advantages to achieve when good vdW junction is secured. Here, we present high-performance p-MoTe2 JFETs using almost perfect vdW organic Alq3/p-MoTe2 junctions and demonstrate organic NPB/n-MoS2 JFETs. The p- and n-channel JFETs stably show high mobilities of 60-80 and â¼800 cm2/V s, respectively, along with a high ON/OFF current ratio (>1 × 105) and minimal gate leakage at 5 V even after a few months. Such performances are attributed to a quality vdW junction at organic layer/TMD interfaces.
RESUMEN
Ultra-thin two-dimensional semiconducting crystals in their monolayer and few-layer forms show promising aspects in nanoelectronic applications. However, the ultra-thin nature of two-dimensional crystals inevitably results in high contact resistance from limited channel/contact volume as well as device-to-device variability, which seriously limit reliable applications using two-dimensional semiconductors. Here, we incorporate rather thick two-dimensional layered semiconducting crystals for reliable vertical diodes showing excellent Ohmic and Schottky contacts. Using the vertical transport of WSe2, we demonstrate devices which are functional at various frequency ranges from megahertz AM demodulation of audio signals, to gigahertz rectification for fifth-generation wireless electronics, to ultraviolet-visible photodetection. The WSe2 exhibits an excellent Ohmic contact to bottom platinum electrode with record-low contact resistance (~50 Ω) and an exemplary Schottky junction to top transparent conducting oxide electrode. Our semitransparent vertical WSe2 Schottky diodes could be a key component of future high frequency electronics in the era of fifth-generation wireless communication.
RESUMEN
Piperine is a major component of black pepper, Piper nigrum Linn, used widely in traditional medicine. In this study, we examined whether piperine could protect House Ear Institute-Organ of Corti 1 (HEI-OC1) cells against cisplatin-induced apoptosis through the induction of heme oxygenase (HO)-1 expression. Piperine (10-100 microM) induced the expression of HO-1 in dose- and time-dependent manners. Piperine also induced antioxidant response element-luciferase and translocated nuclear factor-E2-related factor-2 (Nrf2) to nucleus. Piperine activated the c-Jun N-terminal kinase (JNK), extracellular signal-regulated kinase and p38 mitogen-activated protein kinase (MAPK) pathways, and the JNK pathway played an important role in piperine-induced HO-1 expression. Piperine protected the cells against cisplatin-induced apoptosis. The protective effect of piperine was abrogated by zinc protoporphyrin IX, an HO inhibitor, and antisense oligodeoxynucleotides against HO-1 gene. These results demonstrate that the expression of HO-1 by piperine is mediated by both JNK pathway and Nrf2, and the expression inhibits cisplatin-induced apoptosis in HEI-OC1 cells.
Asunto(s)
Alcaloides/farmacología , Antineoplásicos/toxicidad , Apoptosis/efectos de los fármacos , Benzodioxoles/farmacología , Cisplatino/toxicidad , Hemo-Oxigenasa 1/metabolismo , Órgano Espiral/efectos de los fármacos , Piperidinas/farmacología , Alcamidas Poliinsaturadas/farmacología , Animales , Núcleo Celular/metabolismo , Células Cultivadas , Relación Dosis-Respuesta a Droga , Células Ciliadas Auditivas Externas/metabolismo , Proteínas Quinasas JNK Activadas por Mitógenos/metabolismo , Ratones , Factor 2 Relacionado con NF-E2/metabolismo , Órgano Espiral/enzimología , Transducción de Señal , TransfecciónRESUMEN
In spite of good prospects for bone morphogenetic proteins (BMP) applications, an ideal carrier system for BMPs has not yet been identified. The purpose of this study was to evaluate the osteogenic effect of a fibrin-fibronectin sealing system (FFSS) combined with beta-tricalcium phosphate (beta-TCP) as a carrier system for recombinant human bone morphogenetic proteins (rhBMP-2) in the rat calvarial defect model. Eight-millimeter critical-size calvarial defects were created in 100 male Sprague-Dawley rats. The animals were divided into five groups of 20 animals each. The defects were treated with rhBMP-2/FFSS, rhBMP-2/FFSS/beta-TCP, FFSS and FFSS/beta-TCP carrier control or were left untreated as a sham-surgery control. Defects were evaluated by histologic and histometric parameters following a 2- and 8-week healing interval (10 animals/group/healing intervals). The FFSS/beta-TCP carrier group was significantly greater in new bone area at 2 weeks (p<0.05) and new tissue area at 2 and 8 weeks (p<0.01) relative to the FFSS carrier group. New bone and new tissue area in the rhBMP-2/FFSS/beta-TCP group were significantly greater than in the rhBMP-2/FFSS group at 8 weeks (p<0.01). On histologic observation, FFSS remnants were observed at 2 weeks, but by 8 weeks, the FFSS appeared to be completely resorbed. rhBMP-2 combined with FFSS/beta-TCP produced significantly more new bone and new tissue formation in this calvarial defect model. In conclusion, FFSS/beta-TCP may be considered as an available carrier for rhBMP-2.