Clinical significance of modified unilateral puncture percutaneous vertebroplasty guided by 3D- printed guides in the treatment of osteoporotic vertebral compression fractures: a retrospective study.

OBJECTIVE: To investigate the clinical significance of using 3D printing guides in modified unilateral puncture percutaneous vertebroplasty (PVP) for the treatment of osteoporotic vertebral compression fractures (OVCF), and to explore a new method for preventing paravertebral vein leakage during PVP in conjunction with a previous study of the optimal puncture-side bone cement/vertebral volume ratio(PSBCV/VV%). METHODS: This retrospective study analyzed 99 patients who underwent unilateral puncture PVP between January 2023 and December 2023. Patients were divided into a guide plate group (46 patients) and a conventional group (53 patients). The guide plate group underwent modified unilateral puncture PVP with the guidance of 3D printing guides, while the conventional group underwent unilateral puncture PVP using the conventional pedicle approach. The distribution of bone cement, surgical outcomes, and the occurrence of cement leakage into paravertebral veins were observed in both groups. RESULTS: The guide plate group had significantly shorter operating time and required fewer fluoroscopies compared to the conventional group. The amount of bone cement volume (BCV) used in the guide plate group was higher, but the amount of bone cement volume on the puncture side(PSBCV), the PSBCV/VV%, and the rate of paravertebral vein leakage were lower in the guide plate group compared to the conventional group (P < 0.05). Within each group, significant improvements in anterior vertebral margin height, Cobb angle, visual analog scale (VAS) score, and Oswestry Disability Index (ODI) were observed at 1 day and 1 month postoperatively compared to preoperative values (P < 0.05). CONCLUSION: Using 3D printing guides in modified unilateral puncture PVP is a safe and effective method for treating OVCF. And it has the advantages of short operation time, less fluoroscopy, even distribution of bone cement, and a low rate of paravertebral vein leakage.

The significance of the best puncture side bone cement/vertebral volume ratio to prevent paravertebral vein leakage of bone cement during vertebroplasty: a retrospective study.

OBJECTIVES: To verify the clinical significance of the best puncture-side bone cement/vertebral volume ratio (PSBCV/VV%) and bone cement leakage in paravertebral veins during vertebroplasty. METHODS: This was a retrospective analysis of a total of 210 patients from September 2021 to December 2022, who were divided into an observation group (110 patients) and a control group (100 patients). In the observation group, patients' preoperative computed tomography (CT) data were imported into Mimics software, and the VV was calculated using the three-dimensional (3D) reconstruction function. Then, based on the best PSBCV/VV% of 13.68% determined in a previous study, the optimal PSBCV to be injected during vertebroplasty was calculated. In the control group, vertebroplasty was performed directly using the conventional method. The incidence of cement leakage into paravertebral veins was observed postoperatively in both groups. RESULTS: There were no statistically significant differences (P > 0.05) in the evaluated indicators between the two groups pre- or postoperatively, including the anterior vertebral margin height, mid-vertebral height, injured vertebral Cobb angle, visual analogue scale (VAS) score, and Oswestry Disability Index (ODI). Intragroup comparisons showed improvements in the anterior vertebral height, mid-vertebral height, injured vertebral Cobb angle, VAS score, and ODI after surgery compared with before surgery (P < 0.05). In the observation group, there were 3 cases of cement leakage into the paravertebral veins, for a leakage rate of 2.7%. In the control group, there were 11 cases of cement leakage into the paravertebral veins, for a leakage rate of 11%. The difference in the leakage rate between the two groups was statistically significant (P = 0.016). CONCLUSION: In vertebroplasty, preoperative VV calculations using Mimics software, combined with calculation of the PSBCV according to the best PSBCV/VV% (13.68%), can effectively prevent leakage of bone cement into paravertebral veins and further prevent serious life-threatening complications such as pulmonary embolism.

Correlation analysis of the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein in vertebroplasty.

OBJECTIVES: To explore the influencing factors of bone cement leakage in the paravertebral vein after vertebroplasty for the treatment of osteoporotic vertebral compression fractures (OVCFs) and to determine the correlation between the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein. METHODS: This was a retrospective analysis of 495 patients (585 vertebral bodies) with OVCFs treated from August 2018 to May 2021 in our hospital. The patients' postoperative CT data were imported into Mimics software, and the three-dimensional(3D) reconstruction function was used to calculate the bone cement volume (BCV), puncture-side bone cement volume (PSBCV), and vertebral body volume (VBV); the bone cement/vertebral body volume ratio (BCV/VCV%) and puncture-side bone cement/vertebral body volume ratio (PSBCV/VCV%) were additionally calculated. Sex, Age, Body mass index(BMI), Bone density, BCV, PSBCV, VBV, BCV/VCV%, and PSBCV/VCV were compared between the leakage group and the non-leakage group. Logistic regression analysis was used to assess the correlations between the factors that statistically significantly differed between the two groups and the presence of leakage in the paravertebral veins. A receiver operating characteristic (ROC) curve was used to determine the diagnostic value of the PSBCV/VCV% and to obtain the optional cut-off value. RESULTS: A total of 102 males and 393 females with an average age of 72.89 (52 ~ 93) years were included in our study. There were 57 cases of cement leakage (59 vertebral bodies) in the paravertebral vein. There were 438 patients (526 vertebral bodies) without paravertebral cement leakage. Univariate analysis showed that the differences in sex, bone density, PSBCV, and PSBCV/VCV% between the two groups were statistically significant (P < 0.05). Logistic regression analysis showed that there were correlations between sex, bone density, and PSBCV/VCV% and the presence of paravertebral cement leakage (P < 0.05). The ROC curve showed that the area under the curve of the PSBCV/VCV% for the diagnosis of cement leakage in the paravertebral vein was greater than 0.65, and P < 0.05, indicating a diagnostic value. The best cut-off point for the diagnosis of paravertebral cement leakage with the PSBCV/VCV% was 13.68%, with a sensitivity of 84.7% and specificity of 37.8%. CONCLUSION: Sex, bone density, and PSBCV/VCV% are risk factors for cement leakage in the paravertebral veins after vertebroplasty for the treatment of OVCFs; the PSBCV/VCV% is strongly associated with paravertebral venous leakage, and the optimal PSBCV/VCV% is 13.68%. When the PSBCV/VCV% exceeds the optimal value, the risk of cement leakage in the paravertebral vein becomes significantly increased.

3D-Printed Screw-Rod Auxiliary System for Unstable Atlas Fractures: A Retrospective Analysis.

OBJECTIVE: To develop and validate the efficacy of a 3D-printed screw-rod auxiliary system for unstable atlas fractures. METHODS: This research is a retrospective analysis, and a total of 14 patients, including 11 males and three females, were enrolled in our hospital from January 2017 to March 2019 who underwent occipitocervical fusion assisted by the 3D-printed screw-rod auxiliary system were reviewed, and with an average age of 53.21 ± 14.81 years, an average body mass index (BMI) of 23.61 ± 1.93 kg/m2 . The operation time, blood loss and radiation times during the operation were recorded. The maximum fracture displacement values of pre- and post-operation were measured based on CT imaging. All screw grades were evaluated after surgery. The occipital-cervical 2 (O-C2 ) angle and occipitocervical inclination (OCI) angle of pre-operation, post-operation and the last following-up were measured. The dysphagia scale 3 months after surgery and at the last follow-up, the Neck Disability Index (NDI) 3 months after surgery and at the last follow-up were assessed. RESULTS: All patients were completed the surgery successfully. There was no patient with severe dysphagia or aggravation of nerve injury. The follow-up was from 12 to 14 months, and with an average of 12.5 months. The average surgery time, average blood loss and average radiation times for the 14 patients were 112.14 min, 171.43 mL and 5.07 times, respectively. There was a significant difference in maximum fracture displacement between pre- and post-operation values (P < 0.05). A total of 56 screws were inserted in 14 patients, among them, three screws were classified as grade 1, and the other screws were classified as grade 0. There was a significant difference in the O-C2 between pre-operation and 3 days after operation (P = 0.002); There was a significant difference in OCI angles between pre-operation and 3 days after operation (P < 0.05); there was no significant difference in the O-C2 or OCI angle between 3 days after the operation and the last follow-up (P = 0.079; P = 0.201). The dysphagia scales of two patients were assessed as mild at 3 months after surgery, and the others were assessed as normal at 3 months after surgery. All patients' dysphagia scores returned to normal at the last follow-up. The average NDI and average neck Visual Analogue Scale (VAS) scores at the last follow-up were 2.53 and 8.41, respectively. CONCLUSION: It can objectively restore the OCI to normal with few post-operative complications under the assistance of a screw-rod auxiliary system to perform occipitocervical fusion for unstable atlas fractures and atlantooccipital joint instability.