Emodin ameliorates doxorubicin-induced cardiotoxicity by inhibiting ferroptosis through the remodeling of gut microbiota composition.

The relationship between gut microbiota and doxorubicin-induced cardiotoxicity (DIC) is becoming increasingly clear. Emodin (EMO), a naturally occurring anthraquinone, exerts cardioprotective effects and plays a protective role by regulating gut microbiota composition. Therefore, the protective effect of EMO against DIC injury and its underlying mechanisms are worth investigating. In this study, we analyzed the differences in the gut microbiota in recipient mice transplanted with different flora using 16S-rDNA sequencing, analyzed the differences in serum metabolites among groups of mice using a nontargeted gas chromatography-mass spectrometry coupling system, and assessed cardiac function based on cardiac morphological staining, cardiac injury markers, and ferroptosis indicator assays. We found EMO ameliorated DIC and ferroptosis, as evidenced by decreased myocardial fibrosis, cardiomyocyte hypertrophy, and myocardial disorganization; improved ferroptosis indicators; and the maintenance of normal mitochondrial morphology. The protective effect of EMO was eliminated by the scavenging effect of antibiotics on the gut microbiota. Through fecal microbiota transplantation (FMT), we found that EMO restored the gut microbiota disrupted by doxorubicin (DOX) to near-normal levels. This was evidenced by an increased proportion of Bacteroidota and a decreased proportion of Verrucomicrobiota. FMT resulted in changes in the composition of serum metabolites. Mice transplanted with EMO-improved gut microbiota showed better cardiac function and ferroptosis indices; however, these beneficial effects were not observed in Nrf2 (Nfe2l2)-/- mice. Overall, EMO exerted a protective effect against DIC by attenuating ferroptosis, and the above effects occurred by remodeling the composition of gut microbiota perturbed by DOX and required Nrf2 mediation.NEW & NOTEWORTHY This study demonstrated for the first time the protective effect of emodin against DIC and verified by FMT that its cardioprotective effect was achieved by remodeling gut microbiota composition, resulting in attenuation of ferroptosis. Furthermore, we demonstrated that these effects were mediated by the redox-related gene Nrf2.

RTA 408 ameliorates diabetic cardiomyopathy by activating Nrf2 to regulate mitochondrial fission and fusion and inhibiting NF-κB-mediated inflammation.

Diabetic cardiomyopathy (dCM) is a major complication of diabetes; however, specific treatments for dCM are currently lacking. RTA 408, a semisynthetic triterpenoid, has shown therapeutic potential against various diseases by activating the nuclear factor erythroid 2-related factor 2 (Nrf2) signaling pathway. We established in vitro and in vivo models using high glucose toxicity and db/db mice, respectively, to simulate dCM. Our results demonstrated that RTA 408 activated Nrf2 and alleviated various dCM-related cardiac dysfunctions, both in vivo and in vitro. Additionally, it was found that silencing the Nrf2 gene eliminated the cardioprotective effect of RTA 408. RTA 408 ameliorated oxidative stress in dCM mice and high glucose-exposed H9C2 cells by activating Nrf2, inhibiting mitochondrial fission, exerting anti-inflammatory effects through the Nrf2/NF-κB axis, and ultimately suppressing apoptosis, thereby providing cardiac protection against dCM. These findings provide valuable insights for potential dCM treatments.NEW & NOTEWORTHY We demonstrated first that the nuclear factor erythroid 2-related factor 2 (Nrf2) activator RTA 408 has a protective effect against diabetic cardiomyopathy. We found that RTA 408 could stimulate the nuclear entry of Nrf2 protein, regulate the mitochondrial fission-fusion balance, and redistribute p65, which significantly alleviated the oxidative stress level in cardiomyocytes, thereby reducing apoptosis and inflammation, and protecting the systolic and diastolic functions of the heart.

Paeoniflorin confers ferroptosis resistance by regulating the gut microbiota and its metabolites in diabetic cardiomyopathy.

Diabetic cardiomyopathy (DCM) is closely related to ferroptosis, a new type of cell death that mainly manifests as intracellular iron accumulation and lipid peroxidation. Paeoniflorin (PA) helps to improve impaired glucose tolerance, influences the distribution of the intestinal flora, and induces significant resistance to ferroptosis in several models. In this study, we found that PA improved cardiac dysfunction in mice with DCM by alleviating myocardial damage, resisting oxidative stress and ferroptosis, and changing the community composition and structure of the intestinal microbiota. Metabolomics analysis revealed that PA-treated fecal microbiota transplantation affected metabolites in DCM mice. Based on in vivo and in vitro experiments, 11,12-epoxyeicosatrienoic acid (11,12-EET) may serve as a key contributor that mediates the cardioprotective and antiferroptotic effects of PA-treated fecal microbiota transplantation (FMT) in DCM mice.NEW & NOTEWORTHY This study demonstrated for the first time that paeoniflorin (PA) exerts protective effects in diabetic cardiomyopathy mice by alleviating myocardial damage, resisting ferroptosis, and changing the community composition and structure of the intestinal microbiota, and 11,12-epoxyeicosatrienoic acid (11,12-EET) may serve as a key contributor in its therapeutic efficacy.

Multi-responsive Pickering emulsifiers: a comprehensive study on the emulsification-demulsification behavior of modified chitosan-coated Fe3O4 nanocomposites.

The surface characteristics of stimuli-responsive Pickering emulsifiers can be modified by external environmental triggers, making them highly versatile in various applications. In this study, we report three novel organic-inorganic composite structure emulsifiers. These emulsifiers were designed with a core of magnetic Fe3O4 particles, surrounded by a protective silica layer, and coated on the exterior with three distinct types of modified chitosan (CS). Experimental results demonstrate that these emulsifiers can stabilize emulsion systems consisting of liquid paraffin and deionized water at a concentration of 0.5 wt%. The unique properties of the modified CS coatings allowed for the controlled demulsification of two types of emulsions by adjusting the proton concentration. Additionally, these emulsifiers exhibited magnetic-responsive demulsification under the control of an external magnetic field. The findings of this study provide valuable insights into the design and construction of multi-responsive chitosan-based magnetic Pickering emulsifiers with controllable properties.

pH/magnetic dual responsive Pickering emulsion stabilized by Fe3O4@SiO2@chitosan nanoparticles.

In recent years, Pickering emulsifiers have been widely used in various production fields due to their excellent structural stability, biocompatibility and environmental friendliness. For some applications, it is required that the emulsifier can quickly respond to environmental stimuli and control the transition between stable and unstable emulsions. In this paper, we report a novel composite Pickering emulsifier with Fe3O4 as the core and magnetic response recognition body, silica as the intermediate protective layer, and chitosan (CS) of different molecular weights to endow solid particles with surface activity and pH-responsive properties. This emulsifier can stabilize the emulsion in the emulsion system with deionized water as the aqueous phase and liquid paraffin as the oil phase and can control the demulsification of the formed emulsion under the dual pH/magnetic stimulation. The experimental results show that Fe3O4@SiO2@CS has good paramagnetism and pH responsiveness. The particle size of the composite emulsifier nanoparticles is between 90 nm and 120 nm, and the best stabilizing effect of the emulsion is achieved when the dosage is 0.5 wt%. In the pH range of 3-11, the emulsifier can rapidly demulsify a stable paraffin oil-water emulsion system under the action of a magnetic field of strength 0.4 T. The pH response of the emulsifier is as follows: when pH ≤ 2, the system can form a stable emulsion, which is composed of fully protonated chitosan as a free chain segment and Fe3O4@SiO2. Emulsion stabilization was achieved with monolithic Fe3O4@SiO2@CS as an emulsifier at pH > 2, and demulsification was achieved at pH ≈ pKb (CS) at 298 K. The research in this paper can provide a feasible idea and synthesis method for the preparation of organic-inorganic composite structure emulsifier.

A dissipative particle dynamics simulation of controlled loading and responsive release of theranostic agents from reversible crosslinked triblock copolymer vesicles.

To control the transport stability and release efficiency of loaded theranostic drugs in triblock copolymer carriers, the reversible crosslinking ability is of great significance. A molecular level exploration of such a function is needed to extend existing stabilizing and responsive dissociation mechanisms of carriers. Here, dissipative particle dynamics simulations were used to first demonstrate the formation of triblock copolymer vesicular carriers. Chemical crosslinking was used to strengthen the structural stability of the vesicle shell to avoid drug leakage. Reversible decrosslinking along with dissociation of the vesicle and release of loaded drugs were then explored. The structural, energetic and dynamical properties of the system were discussed at the molecular level. The regulation mechanism of drug release patterns was revealed by systematically exploring the effect of intra and intermolecular repulsive interactions. The results indicate that the chemical crosslinking of copolymers enhanced the compactness of the vesicle shell with a strengthened microstructure, increased binding energy, and limited chain migration, thus achieving more stable delivery of drugs. In terms of drug release, we clarified how the pairwise interactions of beads in the solution system affect the responsive dissociation of the vesicle and associated release patterns (speed and amount) of drugs. More efficient delivery and smart release of theranostic drugs are achieved using such reversible crosslinked triblock copolymer vesicles.

Functional properties and formation mechanisms of dialdehyde polysaccharides crosslinked gliadin-films enforced by alkaline condition.

BACKGROUND: The usage of natural polysaccharides is attractive to researchers around the world. At the same time, non-/low-toxic crosslinkers prepared by polysaccharides are expected to fabricate protein-based films in many fields. Herein, different dialdehyde polysaccharides (DPs) were successfully synthesized and applied to prepare gliadin-films under alkaline conditions. The functional properties and formation mechanisms of the films were fully investigated. RESULTS: The results showed that the mechanical properties, water-resistant properties, thermal stability, and antibacterial properties of the gliadin-films were improved by DPs and alkali treatment. Particularly dialdehyde dextrin (DAD) crosslinked gliadin-films showed the highest tensile strength, but no additional effect on their elongation, or advancement on the other functional properties. The film-forming mechanisms indicated that Schiff base bonds, hydrophobic interactions, electrostatic interactions, and hydrogen bonds were the main forces in the films, supporting their improvement in functional properties. CONCLUSION: DPs, especially DAD, can be a promising crosslinker in fabricating gliadin-films. These findings have shown great promise to seek an effective crosslinker for fabricating gliadin/protein-based packaging. © 2023 Society of Chemical Industry.

Designing polymersomes with inhomogeneous membranes by co-assembly of block copolymers for controlled morphological reversibility.

Polymersomes with inhomogeneous membranes in composition and structure have generated widespread interest for the preparation of functionalized nanocarriers. We propose a simple but versatile strategy to manipulate inhomogeneous subdomains on polymersome membranes by the co-assembly of block copolymer blends with varied molecular architectures and chemistries. Both binary and ternary copolymer blends are considered to construct polymersomes, and the subdomains of the membranes are formed by controlling the difference in the flexibility and rigidity of different blocks. This difference contributes to the formation of disk-like domains (by rigid blocks) and soft domains (by flexible blocks) on the membrane. An interesting effect of this structure is that in response to external stimuli, the soft membrane domain becomes worm-like or porous to "open" the polymersome for matter exchange, while the rigid domain stays undecomposed and acts like an anchor binding all flexible copolymers. Once the external stimuli disappear, all flexible copolymers can be pulled back to restore the original polymersome morphology (i.e., "close" the polymersome). The specific morphological reversibility of hybrid polymersomes holds great potential for practical applications where changeable membrane permeability or shape under environmental stimuli is highly needed.

One-step Ethylene Purification from an Acetylene/Ethylene/Ethane Ternary Mixture by Cyclopentadiene Cobalt-Functionalized Metal-Organic Frameworks.

The separation of ethylene (C2 H4 ) from a mixture of ethane (C2 H6 ), ethylene (C2 H4 ), and acetylene (C2 H2 ) at normal temperature and pressure is a significant challenge. The sieving effect of pores is powerless due to the similar molecular size and kinetic diameter of these molecules. We report a new modification method based on a stable ftw topological Zr-MOF platform (MOF-525). Introduction of a cyclopentadiene cobalt functional group led to new ftw-type MOFs materials (UPC-612 and UPC-613), which increase the host-guest interaction and achieve efficient ethylene purification from the mixture of hydrocarbon gases. The high performance of UPC-612 and UPC-613 for C2 H2 /C2 H4 /C2 H6 separation has been verified by gas sorption isotherms, density functional theory (DFT), and experimentally determined breakthrough curves. This work provides a one-step separation of the ternary gas mixture and can further serve as a blueprint for the design and construction of function-oriented porous structures for such applications.

Harnessed Dopant Block Copolymers Assist Decorating Membrane Pores: A Dissipative Particle Dynamics Study.

Self-assembly of asymmetric block copolymers (BCPs) around active pore edges has emerged as an important strategy to produce smart membranes with tunable pathways for solute transport. However, thus far, it is still challenging to manipulate pore shape and functionality for directional transformation under external stimuli. Here, a versatile strategy by mesoscale simulations to design stimuli-responsive pores with various edge decorations in hybrid membranes is reported. Dopant BCPs are used as decorators to stabilize pore edges and extend their function in reconfiguring pores in response to repeated membrane stretching/shrinking caused by external stimuli. The decoration morphologies are predictable since the assemblies of dopant BCPs around pore edges are closely related to their self-assemblies in solution. The coassembly between different BCPs in the hybrid membrane for the control of pore morphology is featured, and the parameter settings, including block incompatibility and molecular architecture for the construction of a specific pore, are determined. Results show that harnessed dopant BCPs in the hybrid membrane can enhance pore formation and induce directional pore shape and functionality transformation. Diversified pore decorations exhibit potential that can be further explored in selective solute transport and the design of stimuli-responsive smart nanodevices.

Fabrication of a Hydrogen-Bonded Organic Framework Membrane through Solution Processing for Pressure-Regulated Gas Separation.

Ordered and flexible porous frameworks with solution processability are highly desirable to fabricate continuous and large-scale membranes for the efficient gas separation. Herein, the first microporous hydrogen-bonded organic framework (HOF) membrane has been fabricated by an optimized solution-processing technique. The framework exhibits the superior stability because of the abundant hydrogen bonds and strong π-π interactions. Thanks to the flexible HOF structure, the membrane possesses the unprecedented pressure-responsive H2 /N2 separation performance. Furthermore, the scratched membrane can be healed by the treatment of solvent vapor, achieving the recovery of separation performance.

Long-Lived and Thermoresponsive Emulsion Foams Stabilized by Self-Assembled Saponin Nanofibrils and Fibrillar Network.

Nanofibrils from the self-assembly of the naturally occurring saponin glycyrrhizic acid (GA) can be used to produce an oil-in-water emulsion foam with a long-term stability. Through homogenization and aeration followed by rapid cooling, stable emulsion foams can be produced from the mixtures of sunflower oil and saponin nanofibrils. At high temperatures, the GA fibrils form a multilayer assembly at the interface, creating an interfacial fibrillar network to stabilize the oil droplets and air bubbles generated during homogenization. A subsequent rapid cooling can trigger the self-assembly of free GA fibrils in the continuous phase, forming a fibrillar hydrogel and thus trapping the oil droplets and air bubbles. The viscoelastic bulk hydrogel showed a high yield stress and storage modulus, which lead to a complete arrest of the liquid drainage and a strong slowdown of the bubble coarsening in emulsion foams. The jamming of the emulsion droplets in the liquid channels as well as around the bubbles was also found to be able to enhance the foam stability. We show that such stable foam systems can be destroyed rapidly and on demand by heating because of the melting of the bulk hydrogel. The reversible gel-sol phase transition of the GA hydrogel leads to thermoresponsive emulsion foams, for which the foam stability can be switched from stable to unstable states by simply raising the temperature. The emulsion foams can be further developed to be photoresponsive by incorporating internal heat sources such as carbon black particles, which can absorb UV irradiation and convert the absorbed light energy into heat. This new class of smart responsive emulsion foams stabilized by the natural, sustainable saponin nanofibrils has potential applications in the food, pharmaceutical, and personal care industries.

pH-Induced evolution of surface patterns in micelles assembled from dirhamnolipids: dissipative particle dynamics simulation.

Dissipative particle dynamics (DPD) simulation is used to study the effect of pH on the morphological transition in micelles assembled from dirhamnolipids (diRLs), and analyze the pH-driven mechanism and influence factors of micellar surface patterns. At pH < 4.0, various multilayer structures with homogeneous surface patterns are observed, whereas diRLs can self-assemble into novel anisotropic morphologies with phase-separated surface patterns at pH > 7.4, such as patchy spherical micelles, rod-like micelles with helical surface patterns and a lamellar phase with anisotropic surface patterns. The change in a surface pattern results from the diverse molecular arrangement in the course of assembly due to the deprotonation of carboxyl groups. Further studies show that influence factors, such as molecular structure, solvent selectivity and intramolecular interaction, are closely associated with the changes in surface patterns and topological structures. In detail, decreasing the critical packing parameter of rhamnolipids, increasing the solution polarity and weakening the compatibility between rhamnose rings and alkyl chains are all beneficial to the formation of phase-separated surface patterns. Remarkably, a wider variety of surface patterns (randomly anisotropic surface patterns) can be further obtained with the different factors mentioned above. This work is expected to extend the applications of diRLs to advanced functional materials like drug delivery, optoelectronics and nanofiltration membranes.

Tunable Permeability of Cross-Linked Microcapsules from pH-Responsive Amphiphilic Diblock Copolymers: A Dissipative Particle Dynamics Study.

Using dissipative particle dynamics simulation, we probe the tunable permeability of cross-linked microcapsules made from pH-sensitive diblock copolymers poly(ethylene oxide)-b-poly(N,N-diethylamino-2-ethyl methacrylate) (PEO-b-PDEAEMA). We first examine the self-assembly of non-cross-linked microcapsules and their pH-responsive collapse and then explore the effects of cross-linking and block interaction on the swelling or deswelling of cross-linked microcapsules. Our results reveal a preferential loading of hydrophobic dicyclopentadiene (DCPD) molecules in PEO-b-PDEAEMA copolymers. Upon reduction of pH, non-cross-linked microcapsules fully decompose into small wormlike clusters as a result of large self-repulsions of protonated copolymers. With increasing degree of cross-linking, the morphology of the microcapsule becomes more stable to pH change. The highly cross-linked microcapsule shell undergoes significant local polymer rearrangement in acidic solution, which eliminates the amphiphilicility and therefore enlarges the permeability of the shell. The responsive cross-linked shell experiences a disperse-to-buckle configurational transition upon reduction of pH, which is effective for the steady or pulsatile regulation of shell permeability. The swelling rate of the cross-linked shell is dependent on both electrostatic and nonelectrostatic interactions between the pH-sensitive groups as well as the other groups. Our study highlights the combination of cross-linking structure and block interactions in stabilizing microcapsules and tuning their selective permeability.

Controllable multicompartment morphologies from cooperative self-assembly of copolymer-copolymer blends.

Multicompartment nanostructures, such as microcapsules with clearly separated shell and core, are not easily accessible by conventional block copolymer self-assembly. We assess a versatile computational strategy through cooperative assembly of diblock copolymer blends to generate spherical and cylindrical compartmentalized micelles with intricate structures and morphologies. The co-assembly strategy combines the advantages of polymer blending and incompatibility-induced phase separation. Following this strategy, various nanoassemblies of pure AB, binary AB/AC and ternary AB/AC/AD systems such as compartmentalized micelles with sponge-like, Janus, capsule-like and onion-like morphologies can be obtained. The formation and structural adjustment of microcapsule micelles, in which the shell or core can be occupied by either pure or mixed diblock copolymers, were explored. The mechanism involving the separation of shell and core copolymers is attributed to the stretching force differences of copolymers which drive the arrangement of different copolymers in a pathway to minimize the total interfacial energy. Moreover, by adjusting block interactions, an efficient approach is exhibited for regulating the shell or core composition and morphology in microcapsule micelles, such as the transition from the "pure shell/mixed core" morphology to the "mixed shell/pure core" morphology in the AB/AC/AD micelle. This mesoscale simulation study identifies the key factors governing co-assembly of diblock copolymer blends and provides bottom-up insights towards the design and optimization of new multicompartment micelles.

Self-templating synthesis strategy of oxygen-doped carbon from unique wasted pulping liquid directly as a cathode material for high-performance zinc ion hybrid capacitors.

Affinity and storage capacity for zinc ions of the electrode materials are crucial factors on the properties of zinc ion hybrid capacitors (ZHICs). Wasted pulping liquor with abundant carbohydrates, lignin and inorganic matter served as a unique precursor to produce embedded oxygen-doped hierarchical porous carbon directly through a one-step carbonization process in this investigation. In carbonization process, lignin can serve effectively as the carbon framework, carbohydrates not only act as sacrificial templates but also offer a plentiful oxygen source which can increase the affinity for Zn2+, and sodium-containing inorganic substances plays a role as hard templates to optimize the pore structure. The resulting porous carbon under carbonization temperature of 800 °C shows a high specifical area of 2186 m2g-1 with oxygen content of 4.8 %, which can reduce the adsorption energy of Zn2+ from -0.16 eV to -0.32 eV through electrochemical techniques and density functional theory (DFT) calculations, the incorporation of oxygen was demonstrated to enhance the adsorption and desorption kinetics of Zn2+, suggesting a bright future for application in the domain of energy storage. The resulting ZIHC assembly showcases a notable energy density of 84.6 Wh kg-1 at a power density of 359 W kg-1. Remarkably, even after 10,000 charge and discharge cycles, it exhibits exceptional cycle stability with retaining 86.56 % of its capacity. Consequently, this approach provides fresh insights for exploring the facile and commercial fabrication of biomass-derived cathodes for ZIHCs, thereby propelling the progress of eco-friendly energy storage devices.

Double domain fusion improves the reverse transcriptase activity and inhibitor tolerance of Bst DNA polymerase.

To enhance the DNA/RNA amplification efficiency and inhibitor tolerance of Bst DNA polymerase, four chimeric Bst DNA polymerase by fusing with a DNA-binding protein Sto7d and/or a highly hydrophobic protein Hp47 to Bst DNA polymerase large fragment. One of chimeric protein HpStBL exhibited highest inhibitor tolerance, which retained high active under 0.1 U/µL sodium heparin, 0.8 ng/µL humic acid, 2.5× SYBR Green I, 8 % (v/v) whole blood, 20 % (v/v) tissue, and 2.5 % (v/v) stool. Meanwhile, HpStBL showed highest sensitivity (93.75 %) to crude whole blood infected with the African swine fever virus. Moreover, HpStBL showed excellent reverse transcriptase activity in reverse transcription loop-mediated isothermal amplification, which could successfully detect 0.5 pg/µL severe acute respiratory syndrome coronavirus 2 RNA in the presence of 1 % (v/v) stools. The fusion of two domains with different functions to Bst DNA polymerase would be an effective strategy to improve Bst DNA polymerase performance in direct loop-mediated isothermal amplification and reverse transcription loop-mediated isothermal amplification detection, and HpStBL would be a promising DNA polymerase for direct African swine fever virus/severe acute respiratory syndrome coronavirus 2 detection due to simultaneously increased inhibitor tolerance and reverse transcriptase activity.

Total Biosynthesis of Circular Bacteriocins by Merging the Genetic Engineering and Enzymatic Catalysis.

Circular bacteriocins are known for their structural stability and effective antimicrobial properties, positioning them as potential natural food preservatives. However, their widespread application is impeded by restricted availability. This research developed a total biosynthesis platform for circular bacteriocins, with a focus on AS-48 by involving recombinant production of the linear precursor in Escherichia coli, followed by enzymatic cyclization of the precursor into cyclic AS-48 using the ligase butelase-1 in vitro. An important discovery is that, aside from fusion tags, the C-terminal motif LE and LEKKK also could affect the expression yield of the precursor. This biosynthesis platform is both versatile and high-yielding, achieving yields of 10-20 mg/L of AS-48. Importantly, the biosynthetic AS-48 exhibited a secondary structure and antimicrobial activities comparable to those of the native molecules. As such, this work proposes an effective synthetic approach for circular bacteriocins, facilitating their advancement and application in the food industry.

Blood lipid levels mediating the effects of sex hormone-binding globulin on coronary heart disease: Mendelian randomization and mediation analysis.

Observational studies indicate that serum sex hormone-binding globulin (SHBG) levels are inversely correlated with blood lipid levels and coronary heart disease (CHD) risk. Given that dyslipidemia is an established risk factor for CHD, we aim to employ Mendelian randomization (MR) in conjunction with mediation analysis to confirm the mediating role of blood lipid levels in the association between SHBG and CHD. First, we assessed the causality between serum SHBG levels and five cardiovascular diseases using univariable MR. The results revealed causality between SHBG levels and reduced risk of CHD, myocardial infarction, as well as hypertension. Specifically, the most significant reduction was observed in CHD risk, with an odds ratio of 0.73 (95% CI 0.63-0.86) for each one-standard-deviation increase in SHBG. The summary-level data of serum SHBG levels and CHD are derived from a sex-specific genome-wide association study (GWAS) conducted by UK Biobank (sample size = 368,929) and a large-scale GWAS meta-analysis (60,801 cases and 123,504 controls), respectively. Subsequently, we further investigated the mediating role of blood lipid level in the association between SHBG and CHD. Mediation analysis clarified the mediation proportions for four mediators: high cholesterol (48%), very low-density lipoprotein cholesterol (25.1%), low-density lipoprotein cholesterol (18.5%), and triglycerides (44.3%). Summary-level data for each mediator were sourced from the UK Biobank and publicly available GWAS. The above results confirm negative causality between serum SHBG levels and the risk of CHD, myocardial infarction, and hypertension, with the causal effect on reducing CHD risk largely mediated by the improvement of blood lipid profiles.

Temperature-responsive salt-resistant poly(sulfobetaine methacrylate)-based emulsifiers for heavy oils.

The emulsions prepared with most currently reported emulsifiers are stable only at room temperature and are susceptible to demulsification at higher temperatures. This thermal instability prevents their use in high-temperature and high-salt environments encountered oilfield extraction. To address this issue, in this study, two temperature-responsive emulsifiers, PSBMA and CS-PSBMA, were synthesized. Both emulsifiers exhibited the ability to form stable emulsions within the temperature range of 60-80 °C and undergo demulsification at 20-40 °C. A comprehensive investigation was conducted to assess the impact of emulsifier concentration, water-to-oil ratio, and salt ion concentration on the stability of emulsions formed by these two emulsifiers. The results demonstrated their remarkable emulsification capabilities across diverse oil phases. Notably, the novel emulsifier CS-PSBMA, synthesized through the grafting chitosan (CS) onto PSBMA, not only exhibits superior emulsion stability and UCST temperature responsiveness but also significantly enhanced the salt resistance of the emulsion. Remarkably, the emulsion maintained its stability even in the presence of monovalent salt ions at concentrations up to 2 mol/L (equivalent to a mineralization level of 1.33 × 105 mg/L in water) and divalent salt ions at concentrations up to 3 mol/L (equivalent to a mineralization level of 2.7 × 105 mg/L in water). The emulsions stabilized by both emulsifiers are resilient to harsh reservoir conditions and effectively emulsify heavy oils, enabling high-temperature emulsification and low-temperature demulsification. These attributes indicate their promising potential for industrial applications, particularly in the field of enhanced oil recovery.