Oomycete pathogen pectin acetylesterase targets host lipid transfer protein to reduce salicylic acid signaling.

During initial stages of microbial invasion, the extracellular space (apoplast) of plant cells is a vital battleground between plants and pathogens. The oomycete plant pathogens secrete an array of apoplastic carbohydrate active enzymes, which are central molecules for understanding the complex plant-oomycete interactions. Among them, pectin acetylesterase (PAE) plays a critical role in the pathogenesis of plant pathogens including bacteria, fungi, and oomycetes. Here, we demonstrated that Peronophythora litchii (syn. Phytophthora litchii) PlPAE5 suppresses litchi (Litchi chinensis) plant immunity by interacting with litchi lipid transfer protein 1 (LcLTP1). The LcLTP1-binding activity and virulence function of PlPAE5 depend on its PAE domain but not on its PAE activity. The high expression of LcLTP1 enhances plant resistance to oomycete and fungal pathogens, and this disease resistance depends on BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1 (BAK1) and Suppressor of BIR1 (SOBIR1) in Nicotiana benthamiana. LcLTP1 activates the plant salicylic acid (SA) signaling pathway, while PlPAE5 subverts the LcLTP1-mediated SA signaling pathway by destabilizing LcLTP1. Conclusively, this study reports a virulence mechanism of oomycete PAE suppressing plant LTP-mediated SA immune signaling and will be instrumental for boosting plant resistance breeding.

Genomic insights into selection for heterozygous alleles and woody traits in Populus tomentosa.

Heterozygous alleles are widespread in outcrossing and clonally propagated woody plants. The variation in heterozygosity that underlies population adaptive evolution and phenotypic variation, however, remains largely unknown. Here, we describe a de novo chromosome-level genome assembly of Populus tomentosa, an economic and ecologically important native tree in northern China. By resequencing 302 natural accessions, we determined that the South subpopulation (Pop_S) encompasses the ancestral strains of P. tomentosa, while the Northwest subpopulation (Pop_NW) and Northeast subpopulation (Pop_NE) experienced different selection pressures during population evolution, resulting in significant population differentiation and a decrease in the extent of heterozygosity. Analysis of heterozygous selective sweep regions (HSSR) suggested that selection for lower heterozygosity contributed to the local adaptation of P. tomentosa by dwindling gene expression and genetic load in the Pop_NW and Pop_NE subpopulations. Genome-wide association studies (GWAS) revealed that 88 single nucleotide polymorphisms (SNPs) within 63 genes are associated with nine wood composition traits. Among them, the selection for the homozygous AA allele in PtoARF8 is associated with reductions in cellulose and hemicellulose contents by attenuating PtoARF8 expression, and the increase in lignin content is attributable to the selection for decreases in exon heterozygosity in PtoLOX3 during adaptive evolution of natural populations. This study provides novel insights into allelic variations in heterozygosity associated with adaptive evolution of P. tomentosa in response to the local environment and identifies a series of key genes for wood component traits, thereby facilitating genomic-based breeding of important traits in perennial woody plants.

Autophagy-Related Gene PlATG6a Is Involved in Mycelial Growth, Asexual Reproduction and Tolerance to Salt and Oxidative Stresses in Peronophythora litchii.

Autophagy is ubiquitously present in eukaryotes. During this process, intracellular proteins and some waste organelles are transported into lysosomes or vacuoles for degradation, which can be reused by the cell to guarantee normal cellular metabolism. However, the function of autophagy-related (ATG) proteins in oomycetes is rarely known. In this study, we identified an autophagy-related gene, PlATG6a, encoding a 514-amino-acid protein in Peronophythora litchii, which is the most destructive pathogen of litchi. The transcriptional level of PlATG6a was relatively higher in mycelium, sporangia, zoospores and cysts. We generated PlATG6a knockout mutants using CRISPR/Cas9 technology. The P. litchii Δplatg6a mutants were significantly impaired in autophagy and vegetative growth. We further found that the Δplatg6a mutants displayed decreased branches of sporangiophore, leading to impaired sporangium production. PlATG6a is also involved in resistance to oxidative and salt stresses, but not in sexual reproduction. The transcription of peroxidase-encoding genes was down-regulated in Δplatg6a mutants, which is likely responsible for hypersensitivity to oxidative stress. Compared with the wild-type strain, the Δplatg6a mutants showed reduced virulence when inoculated on the litchi leaves using mycelia plugs. Overall, these results suggest a critical role for PlATG6a in autophagy, vegetative growth, sporangium production, sporangiophore development, zoospore release, pathogenesis and tolerance to salt and oxidative stresses in P. litchii.

The Mitogen-Activated Protein Kinase PlMAPK2 Is Involved in Zoosporogenesis and Pathogenicity of Peronophythoralitchii.

As an evolutionarily conserved pathway, mitogen-activated protein kinase (MAPK) cascades function as the key signal transducers that convey information by protein phosphorylation. Here we identified PlMAPK2 as one of 14 predicted MAPKs encoding genes in the plant pathogenic oomycete Peronophythora litchii. PlMAPK2 is conserved in P.litchii and Phytophthora species. We found that PlMAPK2 was up-regulated in sporangium, zoospore, cyst, cyst germination and early stage of infection. We generated PlMAPK2 knockout mutants using the CRISPR/Cas9 method. Compared with wild-type strain, the PlMAPK2 mutants showed no significant difference in vegetative growth, oospore production and sensitivity to various abiotic stresses. However, the sporangium release was severely impaired. We further found that the cleavage of the cytoplasm into uninucleate zoospores was disrupted in the PlMAPK2 mutants, and this developmental phenotype was accompanied by reduction in the transcription levels of PlMAD1 and PlMYB1 genes. Meanwhile, the PlMAPK2 mutants exhibited lower laccase activity and reduced virulence to lychee leaves. Overall, this study identified a MAPK that is critical for zoosporogenesis by regulating the sporangial cleavage and pathogenicity of P.litchii, likely by regulating laccase activity.

Nanovolume Gas-Free Hydroxide Eluent Generator for Open Tubular Ion Chromatography.

A gas-free KOH eluent generator (EG) with 210 nL of internal volume is described. It utilizes a two-membrane configuration where there is a single CEM layer on one side and a single BPM layer on the other side for use in open tubular ion chromatography systems with typical back pressures < 50 psi. At a flow rate of ∼190 nL/min, the 10-90% gradient rise time is 3.5 min. The device shows good linearity between applied current and concentration of KOH generated, which is stable over extended periods. The overall system reproducibility (that includes contributions from any changes in flow rate), as judged by the relative standard deviation (RSD) of the retention times of individual separated ions in repeat measurements (n = 6), ranged from <0.5% for isocratic to <1.2% for gradient elution schemes. Perceptible current flow and KOH production in the BPM-based EG begins at subelectrolytic applied voltages, prompting us to look more closely at exact field strength necessary for field-enhanced dissociation of water. An increase in the specific conductance of pure water is noticeable by a field strength of 105 V/m.

Benefit-risk assessment of commonly consumed fish species from South China Sea based on methyl mercury and DHA.

Even though a growing number of reports indicated favorable health effects with fish consumption, kinds of hazardous substances in fish were detected in fish and to be exceeded advisory limitation. Benefit-risk assessment of commonly consumed fish is urgently needed. We conducted fish consumption survey and fish sampling in the coast of South China Sea to assess benefit-risk effect of commonly consumed fish species. For local residents, weekly methyl mercury (MeHg) exposures from commonly consumed fish species ranged from 0.12 to 2.11 µg/kg bw. Apart from Muraenesox cinereus and Acanthopagrus latus, the rest of 92% (23/25) fish species were at low risk of MeHg exposure. Daily docosahexaenoic acid intakes via consuming specific fish were between 42.18 and 1687.04 mg/day. A total of 72% (18/25) fish species could provide 200 mg/day of DNA for local residents. Benefit-risk assessment assuming intelligence quotient (IQ) score model showed net IQ point gains between 1.53 and 5.65 points with consuming various fish species, indicative of large distinction of health benefit from various fish species. This study suggests commonly consumed fish species from China South Sea could bring much more positive effect than negative effect. Species-specific fish should be considered when providing recommendations of fish consumption. Muraenesox cinereus and Acanthopagrus latus should be minded with risk of MeHg exposure in taking large amounts.

Capillary Scale Admittance and Conductance Detection.

Admittance detection, more commonly called capacitively coupled contactless conductivity detection, is widely used. While the true conductance of a solution is linear with concentration up to ∼1 mequiv/L, the admittance signal is nonlinear. In small-bore capillaries and highly resistive solutions, such as in suppressed open tubular ion chromatography (SOTIC), the admittance signal is exponentially related to concentration. Solution contact conductivity detection is common in microfluidics, but no true conductivity measurement efforts have been made with conventional capillaries in the last two decades. We examine five solution contact cell geometries: (A) wire/disk electrodes perpendicular to the flow direction, (B) annular tubular electrodes facing the flow (that exits through the center tube), (C) ring-disk electrodes facing the flow that exits through the annulus, (D) coplanar parallel wire/disk electrodes facing the flow that exits around the electrodes, and (E) planar electrodes separated by a thin insulating layer with a through-hole in which the liquid flows. Present limitations of the available components as well as the designs themselves do not allow type A and B cells to reach low enough dispersion levels. Types C-E all produce the same efficiency for chloride in a SOTIC setup (12000 ± 200 plates/m), limited by dispersion in the suppressor. Further choice and refinement will be dictated by the availability of a lower dispersion suppressor. All such contact conductance results were linear with concentration, and initial results suggest that attainable LODs will be competitive with those from benchtop ICs.

Human Sex Hormone Disrupting Effects of New Flame Retardants and Their Interactions with Polychlorinated Biphenyls, Polybrominated Diphenyl Ethers, a Case Study in South China.

Even though sex hormone disrupting effects of polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) are widely understood, similar effects associated with new flame retardants (NFRs) have not been so well studied. This study aimed to explore the sex hormone disruption of NFRs and their interactions with PCBs and PBDEs through the conduct of an ecological study in an e-waste dismantling and control region in South China. Questionnaires and blood samples were collected from local adult residents. Results of generalized additive model and linear regression analyses indicate that several species of NFRs showed similar disrupting effects with PBDE congeners on female follicle-stimulating hormone (FSH) and male testosterone. Judged by the curved shape and statistical significance, ΣNFR (sum of 8 species of NFRs) showed stronger disrupting effects on male testosterone and female FSH compared to ΣPBDE (sum of 13 congeners of PBDEs). The interactions induced by NFRs complicated the original sex hormone disruption led by PCBs and PBDEs. The disrupting effects and interactions induced by NFRs decreased female FSH levels in the exposed group. Comprehensive evaluation is needed to provide the evidence base for judging the health risks arising from the increased usage of NFRs.

The effect of aerosolized indomethacin on lung inflammation and injury in a rat model of blunt chest trauma

Background: Acute lung contusion from blunt chest trauma (BCT) is characterized by an intense inflammatory response in the pulmonary parenchyma, which is associated with acute lung injury (ALI), acute respiratory distress syndrome and ventilator-associated pneumonia. We hypothesized that aerosolized indomethacin may reduce pulmonary inflammation and ALI in a rat model of BCT. Methods: Sprague-Dawley rats were anesthetized and received a tracheotomy for administration of aerosolized medication through a catheter. The BCT procedure involved free-dropping a hollow metal weight (200 g) from a height of 25.5, 38.3 or 51.2 cm onto the right thorax. We administered 1 mg/kg of indomethacin or 1 mL/kg of saline intratracheally 15 minutes after BCT. The sham group had a similar procedure without the exposure to BCT and treatment. Three hours postimpact, we obtained arterial blood gas and analyzed bronchoalveolar lavage for protein concentration, polymorphonuclear leukocytes (PMN) and cytokine levels, and lung tissue samples were taken for histopathological analysis. Results: The rats' mean arterial pressure and heart rate dropped immediately postimpact but recovered close to that of the sham group after 30 minutes in both control and treatment groups. Compared to BCT alone, indomethacin significantly reduced the total protein level in the lungs (1.06 ± 0.39 mg/mL v. 3.75 ± 1.95 mg/mL, p = 0.006) and alveolar FD-70 leak (0.23 ± 0.19 µg/mL v. 0.53 ± 0.19 µg/mL, p = 0.02). Indomethacin also significantly attenuated the acute inflammatory response in percent PMN (13.33 ±7.5% v. 28.0 ± 12.96%, p = 0.04). Tumour necrosis factor-α and interleukin-6 decreased in the indomethacin group, but the decreases were not significant compared with other groups. Conclusion: Aerosolized indomethacin has a protective effect against alveloar tissue permeability and inflammatory response induced by BCT.

Contexte: La contusion pulmonaire aiguë causée par un traumatisme thoracique fermé (TTF) se caractérise par une intense réaction inflammatoire dans le parenchyme pulmonaire, liée à une atteinte pulmonaire aiguë (APA), à un syndrome de détresse respiratoire et à la pneumonie associée à la ventilation mécanique. Nous avons émis l'hypothèse que l'indométacine en aérosol pouvait réduire l'inflammation pulmonaire et l'APA dans un modèle murin de TTF. Méthodes: Des rats Sprague-Dawley ont été anesthésiés et ont subi une trachéotomie pour l'administration du médicament en aérosol par un cathéter. Le TTF a été infligé par un poids de métal creux (200 g) en chute libre d'une hauteur de 25,5, 38,3 ou 51,2 cm sur le thorax droit. Nous avons administré 1 mg/kg d'indométacine ou 1 mL/kg de solution saline dans la trachée 15 minutes après le TTF. Un groupe a été soumis à une intervention similaire fictive, sans exposition au TTF ni au traitement. Trois heures après l'impact, nous avons obtenu des gaz artériels et analysé le liquide de lavage bronchoalvéolaire pour connaître les taux de protéines, de leucocytes polymorphonucléaires (PMN) et de cytokines; nous avons aussi prélevé des échantillons de tissu pulmonaire pour des analyses histopathologiques. Résultats: La pression artérielle et la fréquence cardiaque moyennes des rats ont immédiatement chuté après l'impact, mais sont revenues près des valeurs du groupe soumis à l'intervention fictive après 30 minutes dans le groupe témoin et le groupe traité. Comparativement au TTF seul, l'indométacine a significativement réduit le taux de protéines totales dans les poumons (1,06 ± 0,39 mg/mL c. 3,75 ± 1,95 mg/mL, p = 0,006) et la fuite alvéolaire de FD-70 (0,23 ± 0,19 µg/mL c. 0,53 ± 0,19 µg/mL, p = 0,02). L'indométacine a aussi significativement atténué la réaction inflammatoire aiguë en pourcentage de PMN (13,33 ±7,5 % c. 28,0 ± 12,96 %, p = 0,04). Le facteur de nécrose tumorale α et l'interleukine-6 ont diminué dans le groupe sous indométacine, mais ces baisses n'ont pas été significatives comparativement aux autres groupes. Conclusion: L'indométacine en aérosol exerce un effet protecteur contre la perméabilité du tissu alvéolaire et la réaction inflammatoire induite par le un TTF.

Health Risk Assessment for Local Residents from the South China Sea Based on Mercury Concentrations in Marine Fish.

The offshore area of the South China Sea is an important fishing ground in China. We used a food frequency questionnaire to determine marine fish consumption by local residents, and we detected mercury concentrations in commonly consumed marine fish species. In total, 127.9 g/day of the marine fish consumed was identified in 178 local residents. THg and MeHg concentrations in 209 samples of 22 fish species ranged from 11.3 to 215.0 µg/kg wt and 2.0 to 160.0 µg/kg wt, respectively. The mean MeHg exposure from marine fish to local residents was 0.099 µg/kg bw, accounting for 43.0% of the provisional tolerated weekly intake (PTWI) (1.6 µg/kg bw/week), suggesting a low health risk. However, a potentially high health risk (202.2% of PTWI) was identified in those with 97.5% MeHg exposure.

Electrodialytic Capillary Suppressor for Open Tubular Ion Chromatography.

We describe an electrodialytic capillary suppressor for suppressed conductometric open tubular ion chromatography (SC-OTIC). For practical eluent concentrations, suppressor active lengths less than ∼1 mm are adequate. In its preferred embodiment, the suppressor consists of a solid polymer ion exchanger block. Two 0.45-mm-diameter parallel cylindrical passages are provided: these provide for passage of regenerant water and placement of platinum wire electrodes. The suppression channel is made by making a crack in the soft polymer block, using a needle 0.3 mm in diameter. The suppression channel runs parallel to and is flanked by the two aforementioned electrode channels through which water is pumped. The suppressor ends of the separation and the detection capillaries are tapered. The tapered ends of the capillaries are inserted into the suppression channel with the tips 0.4-1.1 mm apart. Using a suppression length of 1 mm, we were able to suppress 100 mM hydroxide @ 100 nL/min (10 neq/min). With such a suppressor coupled to an AS18 latex-coated surface-sulfonated cyclo-olefin polymer (COP) capillary column with an inner diameter (i.d.) of 28 µm and using an on-capillary admittance detector (AD), the feasibility of both isocratic and gradient SC-OTIC was demonstrated. At 170 nL/min (substantially above the Van Deemter optimum), the plate count for fluoride exceeded 70 000 plates/m under isocratic conditions. The dispersion induced by the suppressor could not be determined, because the peak half-widths after suppression were paradoxically less than those without suppression; this apparent negative dispersion is likely an artifact of the detector.

Functionalized Cycloolefin Polymer Capillaries for Open Tubular Ion Chromatography.

We describe novel cycloolefin polymer (COP)-based open tubular capillary ion exchange columns. COP capillaries (inner diameter of 19-28 µm) were successfully sulfonated at room temperature using a cocktail of ClSO3H (85-95% w/w) and HOAc or H2SO4. The cation exchange capacity is controlled by the sulfonation time and the sulfonation solution composition and can be as high as 300 pequiv/mm2. Following sulfonation, the capillaries were coated with 65-nm-diameter anion exchanger (AEX) latex nanoparticles that attach electrostatically. The typical anion exchange capacities were ∼20 pequiv/mm2. The chromatographic behavior of the AEX latex-coated COP capillaries are greatly dependent on the degree of sulfonation. When the base is heavily sulfonated, neutrals elute after the anions. The position of the water dip varies with the degree of sulfonation; the elution order is normal (water dip appear before anions) only with lightly sulfonated columns. On silica (-SiOH) or poly(methyl methacrylate) (-COOH) surfaces, AEX latex attachment is not stable over long periods in significant concentrations of strong base (e.g., ≥10 mM NaOH). Latex attachment on sulfonated COP surfaces are much stronger; several types show sufficient binding to be used over long periods at practical eluent concentrations, paving the way for suppressed hydroxide eluent ion chromatography (IC), which is discussed in a companion paper. Another interesting feature of COP capillaries lies in their flexibility. If softened at modestly elevated temperatures (e.g., boiling water), they can be coiled down to <1 mm coil radii, revealing, for the first time, the beneficial effects, albeit small, of centrifugal force on mass transfer in open tubular columns.

On-column capillary suppressor for open tubular ion chromatography.

BACKGROUND: Suppressors with different dead volumes are required to match different suppressed ion chromatography systems. Especially for suppressed open tubular ion chromatography (SOTIC), the dead volume is a critical parameter. Both connection tubes between open tubular (OT) columns and suppressors and the dead volumes of the suppressors should be as short/small as possible to minimize peak dispersion. Suppressors with different dead volumes are required to match the various suppressed ion chromatography systems that operate at low flow rates 20-200 nL/min. RESULTS: We describe three designs of on-column capillary suppressors for SOTIC: (A) on-column electrodialytic suppressor prepared by making small cracks on the cycloolefin polymer (COP) capillary at targeted locations, (B) on-column electrodialytic suppressor built on a polyether ether ketone (PEEK) capillary by removing the wall materials at target locations, (C) on-column chemical suppressor based on a single cut on a PEEK capillary at a targeted location a single cut on a PEEK capillary at a targeted location. The on-column electrodialytic suppressors work in two different modes with suppression voltage applied in co-current and counter-current direction to the eluent flow. Because of very narrow column inner diameter (i.d.), up to several hundred volts were required to suppress the hydroxide eluent, but it was found the there was a >90% loss of analytes in the suppressor accompanied with a high noise level after on-column electrodialytic suppression. Theoretical analysis reveals that high suppression voltage significantly affects the retention of specific analytes by electromigration. Further analysis indicated that the electrodialytic on-column suppressor in co-current mode would behave totally different from traditional suppressors. The on-column chemical suppression, with minimum dead volume of 0.27 nL, provides fairly well suppression of low hydroxide eluent without analyte loss in the suppressor. In design C, an efficiency of 47000 ± 1800 plates/m for Cl-, corresponding to a peak volume of 17.9 ± 0.7 nL, was obtained when separating five anion mixture (0.5 mM each) in the 25 µm i.d. AS18 latex coated PEEK OT column with an injection of 7.3 nL. Theoretical calculation revealed that a column efficiency loss of ≤3% would result in a cylindrical chemical suppression channel and thus it is taken as the acceptable dispersion contribution originating from the on-column chemical suppressor. SIGNIFICANCE: Different on-column suppressors have been designed on OT columns with i.d.s less than 30 µm. Two electrodialytic on-column suppressor designs with eluent flow parallel to the direction of electric field were proposed and tested. The eluent flow rate, analytes' retention behavior, resistance of suppression channel, current-voltage relationship, and working principles in both co-current and counter-current were experimentally investigated and comprehensively discussed. It was found that although the on-column electrodialytic suppressions (Design A and B) are not feasible in practice, the electrodialytic on-column suppressor on co-current mode has a potential of being used as an enriching capillary column for analyte ions. Design C provides fairly well chemical suppression. Theoretical calculation indicates that the loss of column efficiency can be controlled within 3%.

Mechanistic investigation of the electricity and gallic acid synergistically accelerated Fe(III)/Fe(II) cycle for the degradation of carbamazepine.

This study investigated the application of a natural plant polyphenol, gallic acid (GA) to form complex with iron to promote the redox cycle of Fe(III)/Fe(II) under neutral initial pH conditions in the electrochemical (EC) system for activation of peroxymonosulfate (PMS) to efficiently degrade carbamazepine (CBZ). Results demonstrated that the synergistic effects of GA and EC significantly improved the removal efficiency, and the EC/GA/Fe(III)/PMS system effectively removed 100% of CBZ within a wide initial pH range of 3.0-7.0. The optimum stoichiometric ratio of GA to Fe(III) was found as 2:1. Investigations including quenching experiment, chemical probe analysis, and electron paramagnetic resonance (EPR) analysis were conducted to identify the primary reaction radicals as •OH, SO4•-, along with the 1O2 and Fe(IV). In the EC/GA/Fe(III)/PMS system, the synergistic effect of GA and electrochemistry led to a remarkable enhancement in the generation of •OH. Furthermore, the complexation reduction mechanism of GA and Fe(III) was proposed based on experimental and instrumental analyses, which demonstrated that the semi-quinone products of GA were the main substances promoting the Fe(III)/Fe(II) cycle. Mass spectrometry results showed that CBZ generated 27 byproducts during degradation, with formic acid as the main product of GA. The degradation efficiency of the EC/GA/Fe(III)/PMS system remained stable and excellent, exhibiting remarkable performance in the presence of various inorganic anions, including Cl- and NO3-, as well as naturally occurring organic compounds such as fulvic acid (FA). Overall results indicated that the EC/GA/Fe(III)/PMS system can be applied to effectively treat practical wastewater treatment without requirement of pH adjustment.

Evaluating the Effect of Deficit Irrigation on Yield and Water Use Efficiency of Drip Irrigation Cotton under Film in Xinjiang Based on Meta-Analysis.

Water scarcity constrains the sustainable development of Chinese agriculture, and deficit irrigation as a new irrigation technology can effectively alleviate the problems of water scarcity and water use inefficiency in agriculture. In this study, the drip irrigation cotton field under film in Xinjiang was taken as the research object. Meta-analysis and machine learning were used to quantitatively analyze the effects of different farm management practices, climate, and soil conditions on cotton yield and water use efficiency under deficit irrigation, to investigate the importance of the effects of different factors on cotton yield and water use efficiency, and to formulate appropriate optimization strategies. The results showed that deficit irrigation significantly increased cotton water use efficiency (7.39%) but decreased cotton yield (-15.00%) compared with full irrigation. All three deficit irrigation levels (80~100% FI, 60~80% FI, and 40~60% FI; FI: full irrigation) showed a significant decrease in cotton yield and a significant increase in water use efficiency. Under deficit irrigation, cotton yield reduction was the smallest and cotton water use efficiency increased the most when planted with one film, two tubes, a six-row cropping pattern, an irrigation frequency ≥10 times, a nitrogen application of 300~400 kg·ha-1, and a crop density ≥240,000 per hectare, and planted with the Xinluzhong series of cotton varieties; deficit irrigation in areas with average annual temperature >10 °C, annual evapotranspiration >2000 mm, annual precipitation <60 mm, and with loam, sandy soil had the least inhibition of cotton yield and the greatest increase in cotton water use efficiency. The results of the random forest showed that the irrigation amount and nitrogen application had the greatest influence on cotton yield and water use efficiency. Rational irrigation based on optimal management practices under conditions of irrigation not less than 90% FI is expected to achieve a win-win situation for both cotton yield and water use efficiency. The above results can provide the best strategy for deficit irrigation and efficient water use in drip irrigation cotton under film in arid areas.

Polycrystalline Lead-Free Perovskite Direct X-Ray Detectors with High Durability and Low Limit of Detection via Low-Temperature Coating.

Direct X-ray detectors represent a transformative technology in the realm of radiography and imaging. The double halide-based perovskite cesium silver bismuth bromide (Cs2AgBiBr6) has emerged as a promising material for use in direct X-ray imaging, owing to its nontoxic composition, strong X-ray absorption, decent charge mobility lifetime product (µτ), and low-cost preparation. However, formidable issues related to scalability and ion migration, stemming from intrinsic factors such as halogen vacancies and grain boundaries, have presented significant impediments. These issues have been associated with substantial noise, baseline instability, and a curtailment of detection performance. In response to these multifaceted challenges, we propose a slurry-based in situ treatment technique for fabricating robust Cs2AgBiBr6 thick films. This novel approach adeptly mitigates halogen vacancies, actively passivates grain boundaries, and concurrently elevates the ion migration activation energy, thus effectively suppressing ion migration. Consequently, the obtained X-ray detector exhibits excellent operating stability with minimal signal drift of 8.5 × 10-9 nA cm-1 s-1 V-1 and achieves a remarkable 385% increase in sensitivity with a limit of detection as low as 7.8 nGyair s-1. These results mark a significant step toward the development of high-performance and long-lasting lead-free perovskite direct X-ray detectors.

Electron-deficient Co7Fe3 induced by interfacial effect of molybdenum carbide boosting oxygen evolution reaction.

Developing a high-activity and low-cost catalyst to reduce the anodic overpotential is essential for hydrogen production from water splitting. In this work, a hetero-structured Co7Fe3/Mo2C@C catalyst has been developed to efficiently catalyze oxygen evolution reaction (OER), the overpotential (ƞ10) of Co7Fe3/Mo2C@C-catalyzed OER with current density of 10 mA/cm2 is about 254 mV, substantially lower than the counterparts of Co7Fe3@C-catalyzed OER (ƞ10, 308 mV) and Mo2C@C-catalyzed OER (ƞ10, 439 mV), close to that of OER catalyzed by commercial RuO2. The mechanistic studies reveal that the distinct electron transfer across the Co7Fe3/Mo2C interface results in electron-deficient Co7Fe3, which has been identified as the highly active catalytic sites. Density functional theory (DFT) calculations manifest that Mo2C induces a distinct decrease in electron density on Co7Fe3 and upgrades the d-band centers of Co and Fe in Co7Fe3 towards Fermi energy level, thus substantially lowering the energy barrier of the rate-determining reaction step and conferring significantly improved OER activity on the Co7Fe3/Mo2C@C catalyst.

Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors.

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Analysis of environmental pollutants using ion chromatography coupled with mass spectrometry: A review.

The rise of emerging pollutants in the current environment and requirements of trace analysis in complex substrates pose challenges to modern analytical techniques. Ion chromatography coupled with mass spectrometry (IC-MS) is the preferred tool for analyzing emerging pollutants due to its excellent separation ability for polar and ionic compounds with small molecular weight and high detection sensitivity and selectivity. This paper reviews the progress of sample preparation and ion-exchange IC-MS methods in the analysis of several major categories of environmental polar and ionic pollutants including perchlorate, inorganic and organic phosphorus compounds, metalloids and heavy metals, polar pesticides, and disinfection by-products in past two decades. The comparison of various methods to reduce the influence of matrix effect and improve the accuracy and sensitivity of analysis are emphasized throughout the process from sample preparation to instrumental analysis. Furthermore, the human health risks of these pollutants in the environment with natural concentration levels in different environmental medias are also briefly discussed to raise public attention. Finally, the future challenges of IC-MS for analysis of environmental pollutants are briefly discussed.

Portable light weight open tubular ion chromatograph for field determination of environmental anions.

We report a battery powered non-suppressed open tubular ion chromatograph (NSOTIC) that weighs less than 3 kg with on-board rechargeable lithium-ion batteries that provide power for 18 h of operation. It is contained in an aluminum case measuring 30 × 25 × 16 cm. Separation relies on open tubular (OT) chromatographic columns which eliminate the need for high pressure pumps, drastically reducing weight and complexity. Eluent consumption is less than 100 µL per separation. Eluent is supplied from a pressurized vessel via a voltage-controlled electronic pressure controller. Flow rates are typically <200 nL/min which allows a single 16-20 g gas cartridge to perform hundreds of separations. Two anions, chloride and nitrate, in Atacama soil samples were field determined by running the portable NSOTIC. More samples were lab analyzed by commercial IC and IC/MS-MS (only perchlorate due to its low concentration level). To demonstrate the feasibility of running NSOTIC on sample analysis, samples were tested by both non-portable and portable NSOTIC.