Fabrications of twisted moiré photonic crystal and random moiré photonic crystal and their potential applications in light extraction.

Twisted moiré photonic crystal is an optical analog of twisted graphene or twisted transition metal dichalcogenide bilayers. In this paper, we report the fabrication of twisted moiré photonic crystals and randomized moiré photonic crystals and their use in enhanced extraction of light in light-emitting diodes (LEDs). Fractional diffraction orders from randomized moiré photonic crystals are more uniform than those from moiré photonic crystals. Extraction efficiencies of 76.5%, 77.8% and 79.5% into glass substrate are predicted in simulations of LED patterned with twisted moiré photonic crystals, defect-containing photonic crystals and random moiré photonic crystals, respectively, at 584 nm. Extraction efficiencies of optically pumped LEDs with 2D perovskite (BA)2(MA)n-1PbnI3n+1ofn= 3 and (5-(2'-pyridyl)-tetrazolato)(3-CF3-5-(2'-pyridyl)pyrazolato) platinum(II) (PtD) have been measured.

Holographic fabrication of graded photonic super-quasi-crystals with multiple-level gradients.

Photonic quasi-crystals and photonic crystals with certain degrees of disorder can have a broadband light-matter interaction. In this paper, we present the holographic fabrication of graded photonic super-quasi-crystals through pixel-by-pixel phase pattern engineering using a spatial light modulator. Using the same phase pattern arranged in a decagon, we have fabricated graded photonic super-quasi-crystals with five-fold symmetry and multiple levels of gradients and graded photonic super-crystals with rectangular unit super-cells, depending on the Fourier filter. Although a certain degree of disorder was incorporated in the quasi-crystals, we still observed the golden ratio in the diameters of the diffraction rings of the fabricated quasi-crystals, indicating five-fold symmetry. Using direct pixel-by-pixel phase engineering, the same laser projection system, consisting of an integrated spatial light modulator and a reflective optical element, can be used for the fabrication of graded photonic super-crystals with various symmetries. The multi-level gradient effects on the optical properties of an organic light-emitting diode were simulated. When the cathode of an organic light-emitting device is patterned in the graded photonic super-crystals, a light extraction efficiency up to 76% in the visible range can be achieved.

Universal method for creating optically active nanostructures on layered materials.

The ability to form patterned surface nanostructures has revolutionized the miniaturization of electronics and led to the discovery of emergent behaviors unseen in macroscopic systems. However, the creation of such nanostructures typically requires multiple processing steps, a high level of technical expertise, and highly sophisticated equipment. In this work, we have discovered a simple method to create nanostructures with control size and positioning in a single processing step using a standard scanning electron microscope. The technique can be applied to a wide range of systems and was successful in every layered material tested. Patterned nanostructures were formed on graphite, topological insulators, novel superconductors, and layered transition metal dichalcogenides. The nanostructures were formed via the incorporation of carbon nanoparticles into the samples in a novel form of intercalation. It appears that the electron beam interacts with residual organic molecules available on the sample surface, making it possible for them to intercalate between the layers in their crystal structure and break down into carbon. These carbon nanoparticles have strong broad-wavelength interactions in the visible light range, making these nanostructures easily detectable in an optical microscope and of interest for a range of nanoscale electro-optical devices.

Selective CW Laser Synthesis of MoS2 and Mixture of MoS2 and MoO2 from (NH4)2MoS4 Film.

Very recently, the synthesis of 2D MoS2 and WS2 through pulsed laser-directed thermolysis can achieve wafer-scale and large-area structures, in ambient conditions. In this paper, we report the synthesis of MoS2 and MoS2 oxides from (NH4)2MoS4 film using a visible continuous-wave (CW) laser at 532 nm, instead of the infrared pulsed laser for the laser-directed thermolysis. The (NH4)2MoS4 film is prepared by dissolving its crystal powder in DI water, sonicating the solution, and dip-coating onto a glass slide. We observed a laser intensity threshold for the laser synthesis of MoS2, however, it occurred in a narrow laser intensity range. Above that range, a mixture of MoS2 and MoO2 is formed, which can be used for a memristor device, as demonstrated by other research groups. We did not observe a mixture of MoS2 and MoO3 in the laser thermolysis of (NH4)2MoS4. The laser synthesis of MoS2 in a line pattern is also achieved through laser scanning. Due to of the ease of CW beam steering and the fine control of laser intensities, this study can lead toward the CW laser-directed thermolysis of (NH4)2MoS4 film for the fast, non-vacuum, patternable, and wafer-scale synthesis of 2D MoS2.

Holographic Fabrication of 3D Moiré Photonic Crystals Using Circularly Polarized Laser Beams and a Spatial Light Modulator.

A moiré photonic crystal is an optical analog of twisted graphene. A 3D moiré photonic crystal is a new nano-/microstructure that is distinguished from bilayer twisted photonic crystals. Holographic fabrication of a 3D moiré photonic crystal is very difficult due to the coexistence of the bright and dark regions, where the exposure threshold is suitable for one region but not for the other. In this paper, we study the holographic fabrication of 3D moiré photonic crystals using an integrated system of a single reflective optical element (ROE) and a spatial light modulator (SLM) where nine beams (four inner beams + four outer beams + central beam) are overlapped. By modifying the phase and amplitude of the interfering beams, the interference patterns of 3D moiré photonic crystals are systemically simulated and compared with the holographic structures to gain a comprehensive understanding of SLM-based holographic fabrication. We report the holographic fabrication of phase and beam intensity ratio-dependent 3D moiré photonic crystals and their structural characterization. Superlattices modulated in the z-direction of 3D moiré photonic crystals have been discovered. This comprehensive study provides guidance for future pixel-by-pixel phase engineering in SLM for complex holographic structures.

Enhanced Photoluminescence and Prolonged Carrier Lifetime through Laser Radiation Hardening and Self-Healing in Aged MAPbBr3 Perovskites Encapsulated in NiO Nanotubes.

Organic-inorganic perovskites hold great promise as optoelectronic semiconductors for pure color light emitting and photovoltaic devices. However, challenges persist regarding their photostability and chemical stability, which limit their extensive applications. This paper investigates the laser radiation hardening and self-healing-induced properties of aged MAPbBr3 perovskites encapsulated in NiO nanotubes (MAPbBr3@NiO) using photoluminescence (PL) and fluorescence lifetime imaging (FLIM). After deliberately subjecting the MAPbBr3@ NiO to atmospheric conditions for two years, the sample remains remarkably stable. It exhibits no changes in PL wavelength during UV laser irradiation and self-healing. Furthermore, exposure to UV light at 375 nm enhances the PL of the self-healed MAPbBr3@NiO. FLIM analysis sheds light on the mechanism behind photodegradation, self-healing, and PL enhancement. The results indicate the involvement of many carrier-trapping states with low lifetime events and an increase in peak lifetime after self-healing. The formation of trapping states at the perovskite/nanotube interface is discussed and tested. This study provides new insights into the dynamics of photo-carriers during photodegradation and self-healing in organic-inorganic perovskites.

Holographic fabrication of octagon graded photonic supercrystal and potential applications in topological photonics.

Novel optical properties in graded photonic super-crystals can be further explored if new types of graded photonic super-crystals are fabricated. In this paper, we report holographic fabrication of graded photonic super-crystal with eight graded lattice clusters surrounding the central non-gradient lattices through pixel-by-pixel phase engineering in a spatial light modulator. The prospect of applications of octagon graded photonic super-crystal in topological photonics is discussed through photonic band gap engineering and coupled ring resonators.