Miniplate With a Bendable C-Tube Head Allows the Clinician to Alter Biomechanical Advantage in Extremely Complicated Anatomic Structure.

BACKGROUNDS: This article reports C-tube miniplates as a practical temporary anchorage device choice to treat open bite patients with maxillary sinus pneumatization. METHODS: The C-tube components are titanium anchor plates and monocortical screws that are basically similar to any other miniplate systems, but it has the unique characteristic of the tube head to be malleable. The manipulation of the head part is easy due to the composition of pure titanium. The I-shaped C-tube with 3 holes and T-shaped C-tube miniplates were placed above the apices of maxillary molars as an absolute anchorage system to intrude the posterior maxilla. The bending of the tube heads assisted in reduction of severe open bite patient with maxillary sinus pneumatization. RESULTS: Sinus perforation during placement of skeletal anchorage system weakens stability of the anchorage and further cause complications. Placement of titanium C-tube miniplates allowed reliable skeletal anchorage and avoided maxillary sinus perforation in patients with extreme pneumatizations. Simple bending of C-tube miniplates ensured increased orthodontic intrusion force without having to replace them, and eliminated consequences such as perforation of maxillary sinus, sinusitis, soft tissue irritation, or infection. CONCLUSIONS: Anatomic difficulties in the placement of temporary anchorage device can be easily managed by using the bendable C-tube miniplate. It can serve as a great alternative over miniscrews or regular miniplates with reduced risk of sinus perforation and ability to bend the head portion to control orthodontic vectors and forces.

Effect of heparin and alendronate coating on titanium surfaces on inhibition of osteoclast and enhancement of osteoblast function.

The failure of orthopedic and dental implants has been attributed mainly to loosening of the implant from host bone, which may be due to weak bonding of the implant material to bone tissue. Titanium (Ti) is used in the field of orthopedic and dental implants because of its excellent biocompatibility and outstanding mechanical properties. Therefore, in the field of materials science and tissue engineering, there has been extensive research to immobilize bioactive molecules on the surface of implant materials in order to provide the implants with improved adhesion to the host bone tissue. In this study, chemically active functional groups were introduced on the surface of Ti by a grafting reaction with heparin and then the Ti was functionalized by immobilizing alendronate onto the heparin-grafted surface. In the MC3T3-E1 cell osteogenic differentiation study, the alendronate-immobilized Ti substrates significantly enhanced alkaline phosphatase activity (ALP) and calcium content. Additionally, nuclear factor kappa B ligand (RANKL)-induced osteoclast differentiation of RAW264.7 cells was inhibited with the alendronate-immobilized Ti as confirmed by TRAP analysis. Real time PCR analysis showed that mRNA expressions of osteocalcin and osteopontin, which are markers for osteogenesis, were upregulated in MC3T3-E1 cells cultured on alendronate-immobilized Ti. The mRNA expressions of TRAP and Cathepsin K, markers for osteoclastogenesis, in RAW264.7 cells cultured on alendronate-immobilized Ti were down-regulated. Our study suggests that alendronate-immobilized Ti may be a bioactive implant with dual functions to enhance osteoblast differentiation and to inhibit osteoclast differentiation simultaneously.

Ultrasound-guided sialo-irrigation for the treatment of chronic sialodochitis with sialolithiasis.

Sialolithiasis is one of the most common causes of salivary duct obstruction. In the last 20 years, minimally invasive procedures like sialendoscopy, extracorporeal lithotripsy, and basket snaring are increasingly being used for the treatment of salivary gland duct stones. Sialo-irrigation of the salivary gland is an effective procedure for treating inflammation and providing symptomatic relief. This procedure can be employed for the treatment of sialolithiasis using the back pressure of instilled saline. Sialo-irrigation under ultrasound (US) guidance allows for dynamic studies showing real-time images during diagnostic or surgical procedure and can be used for the removal of sialoliths. In addition, it can also be used to remove primitive sialoliths and microliths by washing out the ductal system, which prevents the recurrence of sialoliths. The aim of this study was to propose a minimally invasive technique for sialolithiasis using US-guided sialo-irrigation.

Radiation dosimetry analyses of radiographic imaging systems used for orthodontic treatment: comparison among child, adolescent, and adult patients.

OBJECTIVES: The aim of this study was to compare the effective doses of orthodontic radiographs in children, adolescents, and adults. METHODS: We exposed a child, an adolescent (simulated by an adult female phantom), and adult male phantoms using common scanning protocols for panoramic radiography, cephalography, and cone-beam computed tomography (CBCT). Glass dosimeters were placed in the organs of the phantom to measure the absorbed doses. The effective doses were deduced using tissue weighting factors as defined in the ICRP Publication 103. RESULTS: For panoramic imaging, the parotid gland had the highest absorbed dose in the child and the submandibular glands had the highest absorbed dose in both the adolescent and adult phantoms. For cephalography, the organs and tissues located closest to the X-ray tube had the highest absorbed dose values. For CBCT, the lenses of the eyes received the highest absorbed dose. Effective doses with CBCT were the greatest in the adolescent phantom, followed by in the adult and child phantoms. CONCLUSIONS: Dental practitioners should be aware of patient age, as younger patients will incur greater risks from radiation.

Root proximity of the anchoring miniscrews of orthodontic miniplates in the mandibular incisal area: Cone-beam computed tomographic analysis.

OBJECTIVE: This outcome analysis study evaluated the actual positions of the orthodontic miniplate and miniplate anchoring screws (MPASs) and the risk factors affecting adjacent anatomic structures after miniplate placement in the mandibular incisal area. METHODS: Cone-beam computed tomographic images of 97 orthodontic miniplates and their 194 MPASs (diameter, 1.5 mm; length, 4 mm) in patients whose miniplates provided sufficient clinical stability for orthodontic treatment were retrospectively reviewed. For evaluating the actual positions of the miniplates and analyzing the risk factors, including the effects on adjacent roots, MPAS placement height (PH), placement depth (PD), plate angle (PA), mental fossa angle (MA), and root proximity were assessed using the paired t-test, analysis of variance, and generalized linear model and regression analyses. RESULTS: The mean PDs of MPASs at positions 1 (P1) and 2 (P2) were 2.01 mm and 2.23 mm, respectively. PA was significantly higher in the Class III malocclusion group than in the other groups. PH was positively correlated with MA and PD at P1. Of the 97 MPASs at P1, 49 were in the no-root area and 48 in the dentulous area; moreover, 19 showed a degree of root contact (19.6%) without root perforation. All MPASs at P2 were in the no-root area. CONCLUSIONS: Positioning the miniplate head approximately 1 mm lower than the mucogingival junction is highly likely to provide sufficient PH for the P1- MPASs to be placed in the no-root area.

Quantitative cone-beam computed tomography evaluation of hard and soft tissue thicknesses in the midpalatal suture region to facilitate orthodontic mini-implant placement.

OBJECTIVE: To identify the most favorable sites that optimize the initial stability and survival rate of orthodontic mini-implants, this study measured hard and soft tissue thicknesses in the median and paramedian regions of the palate using cone-beam computed tomography (CBCT) and determined possible sexand age-related differences in these thicknesses. METHODS: The study sample comprised CBCT images of 189 healthy subjects. The sample was divided into four groups according to age. A grid area was set for the measurement of hard and soft tissue thicknesses in the palate. Vertical lines were marked at intervals of 0, 1.5, and 3.0 mm lateral to the midpalatal suture, while horizontal lines were marked at 2-mm intervals up to 24 mm from the posterior margin of the incisive foramen. Measurements were made at 65 points of intersection between the horizontal and vertical lines. RESULTS: The palatal hard tissue thickness decreased from the anterior to the posterior region, with a decrease in the medial-to-lateral direction in the middle and posterior regions. While the soft tissue was rather thick around the lateral aspects of the palatal arch, it formed a constant layer that was only 1-2-mm thick throughout the palate. Statistically significant differences were observed according to sex and age. CONCLUSIONS: The anterolateral palate as well as the midpalatal suture seem to be the most favorable sites for insertion of orthodontic mini-implants. The thickness of the palate differed by age and sex; these differences should be considered while planning the placement of orthodontic mini-implants.

Cone-beam computed tomography of mandibular foramen and lingula for mandibular anesthesia.

PURPOSE: The positions of the mandibular foramen (MnF) and the lingula affect the success rate of inferior alveolar nerve block. The objective of this study was to investigate aspects of the MnF and the lingula relevant for mandibular block anesthesia using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Fifty CBCT scans were collected from a picture archiving and communications system. All scans were taken using an Alphard Vega 3030 (Asahi Roentgen Co. Ltd., Kyoto, Japan). Fifty-eight MnFs of 30 subjects were included in the study. The position of the MnF, the size of the MnF, the position of the lingula, the size of the lingula, and the shape of the lingula were measured and recorded. All data were statistically analyzed at a significance level of P<0.05. RESULTS: The position of MnF was 0.1 mm and 0.8 mm below the occlusal plane in males and females, respectively. The horizontal position of the MnF was slightly anterior to the center of the ramus in males and in the center in females (P<0.05). The vertical position of the MnF was lower in females than in males (P<0.05). The MnF was an oval shape with a longer anteroposterior dimension. The height of the lingula was 9.3 mm in males and 8.2 mm in females. The nodular type was the most common shape of the lingula, followed by the triangular, truncated, and assimilated types. CONCLUSION: CBCT provided useful information about the MnF and lingula. This information could improve the success rate of mandibular blocks.

Malignant transformation of fibrous dysplasia into angiosarcoma.

Fibrous dysplasia (FD) is generally considered to be a benign disease that affects the bones, but it has potential to become malignant over time, generally several decades after its initial diagnosis. Radiation therapy can induce malignant transformation of FD; however, reports have indicated a few cases of malignant transformation of FD in the absence of radiation therapy. Angiosarcoma is a particularly rare type of cancer in the oral region, which accounts for less than 1% of all soft-tissue sarcomas. Herein, we reported a case of a 62-year-old man with monostotic FD of the left maxilla of over 50 years' duration that underwent malignant transformation into an epithelioid-type angiosarcoma. To the best of our knowledge, this is the first report of such case.

Evaluation of interdental space of the maxillary posterior area for orthodontic mini-implants with cone-beam computed tomography.

INTRODUCTION: Our objectives in this study were to measure in a group of patients the interradicular spaces between the maxillary second premolar and first molar, which is often used as placement sites for mini-implants, and to suggest simple guidelines for safe placement. METHODS: Cone-beam computed tomography was used in 35 patients to measure interdental spaces and distances between the surface of the cortical bone and the closest interradicular area apically in 1-mm intervals in 9 axial images from the cementoenamel junction (CEJ). The cone-beam computed tomography data were analyzed by using anlaysis of variance (ANOVA) to evaluate the differences in interradicular distances, cortical bone surfaces, and narrowest interradicular spaces. A t test was also performed to evaluate sex and placement side differences. RESULTS: Interradicular space became wider toward the apical area; several axial planes showed statistically nonsignificant differences from the CEJ to the root, and the average distance from the surface of the cortical bone to the area of the closest interradicular space was over 5 mm in the most sections. CONCLUSIONS: Guidelines for safe placement are as follows: the initial point for mini-implant placement is near the mucogingival line (2-4 mm from the CEJ) and less than a 45 degrees apical angulation to the long axis of tooth, with a mini-implant diameter of 1.4 to 1.8 mm and length of about 6 mm (bone contact). A larger placement angle would increase the cortical bone contact; however, it is difficult to apply various traction materials and might increase the danger of maxillary sinus perforation.

Diagnostic considerations in central odontogenic fibroma of the maxilla: 2 case reports.

Central odontogenic fibroma (COF) is defined as a fibroblastic odontogenic tumor characterized by varying density of the tooth epithelium. It is an extremely rare benign neoplasm that occurs in the maxilla and the mandible; only a few reports of COF are available in the literature. Diagnosis of the lesion based only on the radiological features of COF is difficult due to variation in the findings regarding this condition. This report describes 2 clinical cases of middle-aged women with COF. Clinical examination revealed palatal mucosal depression; additionally, oral examination, as well as panoramic radiographs, intraoral radiographs, and computed tomography scans, revealed severe root resorption. This report highlights the clinical and radiological imaging features of COF, with the goal of enabling straightforward differential diagnosis of the lesion by the clinician and thereby appropriate treatment of the patient.

Power Doppler ultrasound-guided sialography using the phenomenon of increased blood flow: A technical report.

PURPOSE: This report presents a procedure for performing power Doppler ultrasound-guided sialography using the phenomenon of increased blood flow and illustrates its application to practical patient cases. MATERIALS AND METHODS: The salivary gland was scanned using ultrasound equipment (GE LOGIQ5 Expert® device; GE Medical Systems, Milwaukee, WI, USA) to identify pathological findings related to the patient's chief complaint. To identify the orifice of the main duct, it should be cannulated using a lacrimal dilator. After inserting the catheter into the cannulated main duct, the position of the catheter within the duct was confirmed by ultrasound. A contrast agent was injected until the patient felt fullness, and ultrasound (B-mode) was used to confirm whether the contrast agent filled the main canal and secondary and tertiary ducts. Then, power Doppler ultrasound was performed to determine whether the salivary gland had increased blood flow. RESULTS: In 2 cases in this report, a power Doppler ultrasound scan showed a significant increase in blood flow after contrast medium injection, which was not observed on a preoperative scan. CONCLUSION: Power Doppler ultrasound was found to be a simple, safe, and effective tool for real-time sialography monitoring.

Protection evaluation of non-lead radiation-shielding fabric: preliminary exposure-dose study.

OBJECTIVES: The aim of this study was to evaluate the effectiveness and shielding performance of a novel recently developed non-lead radiation-shielding fabric containing bismuth oxide (BO-fabric). METHODS: BO-fabric was fabricated using urethane resin and bismuth nanopowder. A dose-measurement method was employed to evaluate the radiation-attenuation characteristics of the shielding fabric in accordance with the Korean Standards standard. The shielding performances (%) were calculated by measuring the radiation doses after lamination with increasing layers of fabric (1-10 layers). The physical performance of the fabric in terms of flexural and abrasion resistances was evaluated by the Korea Apparel Testing and Research Institute (KATRI). RESULTS: The radiation-attenuation capabilities of one layer of BO-fabric were 58.5, 49.9, and 43.0% at tube voltages of 60, 80, and 100 kVp, respectively. The radiation-shielding performance upon lamination of BO-fabric gradually increased as the number of layers increased. Excellent flexural and abrasion resistances were observed in the KATRI evaluation. CONCLUSIONS: A non-lead radiation-shielding fabric based on urethane resin and bismuth was fabricated and examined, revealing an excellent shielding performance. Owing to the flexibility and simple operation of the fabric, it can be employed for various designs of clothing and protective apparel with many purposes.

Characteristic imaging findings of acantholytic squamous cell carcinoma: a case report.

Acantholytic squamous cell carcinoma (ASCC) is an uncommon, histopathologically distinct variant of squamous cell carcinoma. ASCC commonly occurs in areas of skin exposed to sunlight and has only rarely been seen on mucosal surfaces such as the oral cavity. Although the World Health Organization has defined ASCC as an original entity, the imaging findings of ASCC have not been adequately described. We herein report a case of ASCC occurring in the oral mucosa with emphasis on the findings of several imaging studies: panoramic radiography, intraoral radiography, contrast-enhanced computed tomography, magnetic resonance imaging, and fluorine-18 fluorodeoxyglucose positron emission tomography-computed tomography.

Ultrasound-guided sialo-irrigation with a saline-air mixture as the contrast medium.

Ultrasound (US)-guided salivary gland irrigation is a popular conservative treatment method that improves the success rate and reduces complications of the sialo-irrigation procedure. US is routinely used for evaluation of various salivary gland diseases because of its easy accessibility and absence of ionizing radiation. US also allows dynamic studies with real-time imaging during diagnostic or surgical procedures. However, conventional US images have limitations in salivary duct visualization. Although US images acquired with saline irrigation have improved visualization because of ductal system dilation by the pulling effect, the resultant image quality remains insufficient for diagnosis. Therefore, contrast agents are required during US-guided sialo-irrigation procedures to produce diagnostic image quality. Air bubbles in saline solution have high echogenicity and enhance image quality by acting as a US contrast agent. The aim of this study was to assess the clinical significance of US-guided sialo-irrigation with a saline-air contrast medium, to estimate its diagnostic and treatment efficacy, and to examine the procedure in two patients. In the study, two patients underwent US-guided salivary gland irrigation with air-bubble mixed saline solution. During the procedure, we were able to visualize the salivary gland duct and subsequently irrigate and clean the inside of the duct. As a result, the patients' symptoms were relieved and saline solution mixed with air bubbles was confirmed to be an effective contrast agent.

Radiculomegaly of canines in oculofaciocardiodental syndrome.

Oculofaciocardiodental (OFCD) syndrome is a rare genetic disease, first reported by Hayward in 1980. This syndrome presents with various ocular, facial, cardiac, and dental symptoms, including congenital cataract, dysmorphic facial features, congenital heart disease, and enlarged roots, respectively. The most important criteria for the diagnosis of OFCD syndrome are dental abnormalities, especially extreme elongation of canine roots. Here, we report detailed analysis of the dentofacial region, as well as ocular, facial, cardiac, and dental findings in a female with OFCD syndrome. To the best of our knowledge, the patient in this case is the first such patient reported in South Korea.

Unusual malignant neoplasms occurring around dental implants: A report of 2 cases.

Osseointegrated implants are now commonplace in contemporary dentistry. However, a number of complications can occur around dental implants, including peri-implantitis, maxillary sinusitis, osteomyelitis, and neoplasms. There have been several reports of a malignant neoplasm occurring adjacent to a dental implant. In this report, we describe 2 such cases. One case was that of a 75-year-old man with no previous history of malignant disease who developed a solitary plasmacytoma around a dental implant in the left posterior mandible, and the other was that of a 43-year-old man who was diagnosed with squamous cell carcinoma adjacent to a dental implant in the right posterior mandible. Our experiences with these 2 cases suggest the possibility of a relationship between implant treatment and an inflammatory cofactor that might increase the risk of development of a malignant neoplasm.

Linear accuracy of cone-beam computed tomography and a 3-dimensional facial scanning system: An anthropomorphic phantom study.

PURPOSE: This study was conducted to evaluate the accuracy of linear measurements of 3-dimensional (3D) images generated by cone-beam computed tomography (CBCT) and facial scanning systems, and to assess the effect of scanning parameters, such as CBCT exposure settings, on image quality. MATERIALS AND METHODS: CBCT and facial scanning images of an anthropomorphic phantom showing 13 soft-tissue anatomical landmarks were used in the study. The distances between the anatomical landmarks on the phantom were measured to obtain a reference for evaluating the accuracy of the 3D facial soft-tissue images. The distances between the 3D image landmarks were measured using a 3D distance measurement tool. The effect of scanning parameters on CBCT image quality was evaluated by visually comparing images acquired under different exposure conditions, but at a constant threshold. RESULTS: Comparison of the repeated direct phantom and image-based measurements revealed good reproducibility. There were no significant differences between the direct phantom and image-based measurements of the CBCT surface volume-rendered images. Five of the 15 measurements of the 3D facial scans were found to be significantly different from their corresponding direct phantom measurements (P<.05). The quality of the CBCT surface volume-rendered images acquired at a constant threshold varied across different exposure conditions. CONCLUSION: These results proved that existing 3D imaging techniques were satisfactorily accurate for clinical applications, and that optimizing the variables that affected image quality, such as the exposure parameters, was critical for image acquisition.

Surgical positioning of orthodontic mini-implants with guides fabricated on models replicated with cone-beam computed tomography.

INTRODUCTION: This article illustrates a new surgical guide system that uses cone-beam computed tomography (CBCT) images to replicate dental models; surgical guides for the proper positioning of orthodontic mini-implants were fabricated on the replicas, and the guides were used for precise placement. The indications, efficacy, and possible complications of this method are discussed. METHODS: Patients who were planning to have orthodontic mini-implant treatment were recruited for this study. A CBCT system (PSR 9000N, Asahi Roentgen, Kyoto, Japan) was used to acquire virtual slices of the posterior maxilla that were 0.1 to 0.15 mm thick. Color 3-dimensional rapid prototyping was used to differentiate teeth, alveolus, and maxillary sinus wall. A surgical guide for the mini-implant was fabricated on the replica model. Proper positioning for mini-implants on the posterior maxilla was determined by viewing the CBCT images. RESULTS: The surgical guide was placed on the clinical site, and it allowed precise pilot drilling and accurate placement of the mini-implant. CONCLUSIONS: CBCT imaging allows remarkably lower radiation doses and thinner acquisition slices compared with medical computed tomography. Virtually reproduced replica models enable precise planning for mini-implant positions in anatomically complex sites.

Volumetric accuracy of cone-beam computed tomography.

PURPOSE: This study was performed to investigate the influence of object shape and distance from the center of the image on the volumetric accuracy of cone-beam computed tomography (CBCT) scans, according to different parameters of tube voltage and current. MATERIALS AND METHODS: Four geometric objects (cylinder, cube, pyramid, and hexagon) with predefined dimensions were fabricated. The objects consisted of Teflon-perfluoroalkoxy embedded in a hydrocolloid matrix (Dupli-Coe-Loid TM; GC America Inc., Alsip, IL, USA), encased in an acrylic resin cylinder assembly. An Alphard Vega Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) was used to acquire CBCT images. OnDemand 3D (CyberMed Inc., Seoul, Korea) software was used for object segmentation and image analysis. The accuracy was expressed by the volume error (VE). The VE was calculated under 3 different exposure settings. The measured volumes of the objects were compared to the true volumes for statistical analysis. RESULTS: The mean VE ranged from -4.47% to 2.35%. There was no significant relationship between an object's shape and the VE. A significant correlation was found between the distance of the object to the center of the image and the VE. Tube voltage affected the volume measurements and the VE, but tube current did not. CONCLUSION: The evaluated CBCT device provided satisfactory volume measurements. To assess volume measurements, it might be sufficient to use serial scans with a high resolution, but a low dose. This information may provide useful guidance for assessing volume measurements.

Intravenous contrast media application using cone-beam computed tomography in a rabbit model.

PURPOSE: This study was performed to evaluate the feasibility of visualizing soft tissue lesions and vascular structures using contrast-enhanced cone-beam computed tomography (CE-CBCT) after the intravenous administration of a contrast medium in an animal model. MATERIALS AND METHODS: CBCT was performed on six rabbits after a contrast medium was administered using an injection dose of 2 mL/kg body weight and an injection rate of 1 mL/s via the ear vein or femoral vein under general anesthesia. Artificial soft tissue lesions were created through the transplantation of autologous fatty tissue into the salivary gland. Volume rendering reconstruction, maximum intensity projection, and multiplanar reconstruction images were reconstructed and evaluated in order to visualize soft tissue contrast and vascular structures. RESULTS: The contrast enhancement of soft tissue was possible using all contrast medium injection parameters. An adequate contrast medium injection parameter for facilitating effective CE-CBCT was a 5-mL injection before exposure combined with a continuous 5-mL injection during scanning. Artificial soft tissue lesions were successfully created in the animals. The CE-CBCT images demonstrated adequate opacification of the soft tissues and vascular structures. CONCLUSION: Despite limited soft tissue resolution, the opacification of vascular structures was observed and artificial soft tissue lesions were visualized with sufficient contrast to the surrounding structures. The vascular structures and soft tissue lesions appeared well delineated in the CE-CBCT images, which was probably due to the superior spatial resolution of CE-CBCT compared to other techniques, such as multislice computed tomography.