RESUMEN
Nanostructures can realize highly efficient reactions due to their structural advantages. However, the mechanism of accelerating enzyme reactions in a nanospace is still unknown from a kinetic perspective because it is difficult to control a well-defined nanospace, enzyme density, and reaction time. Here, we investigated kinetic parameters of an immobilized enzyme in micro- and nanochannels using nanofabrication, partial enzyme patterning, fluidic control, and a high sensitivity detection system. Devices with channel depths of 300 nm, 4.4 µm, and 13.6 µm were fabricated. Kinetic parameters were determined by the Michaelis-Menten model. Compared to the bulk reaction, all kcats for immobilized enzyme reactors were decreased, although the kcats were approximately the same for the immobilized enzyme reactors of different depths. An ultrafast enzyme reaction could overcome the drawback due to immobilization by an increase of the apparent [E]0 due to the decreased channel depth.
Asunto(s)
Enzimas Inmovilizadas , Cinética , Enzimas Inmovilizadas/químicaRESUMEN
Drying a suspension of nanoparticles typically results in the irreversible aggregation of nanoparticles; however, solutions that contain unstable ingredients are often converted into dried powders to prolong their shelf lives. In this study, the use of a combination of a surface-active agent and sugar was investigated with regard to avoiding the aggregation of nanoparticles during drying. Suspensions of Au nanoparticles (â¼60 nm diameter, AuNPs) were freeze-dried in the presence of different combinations of various sugars with a surfactant. Sucrose monopalmitate (SEC16) was mainly used as the surfactant, based on a comparison of antiaggregation effects conferred by various surfactants. The freeze-dried AuNP suspension was then reconstituted, and the avoidance of AuNP aggregation was then examined. The results demonstrated that the use of a combination of a small amount of SEC16 and sugar resulted in a greater redispersibility of AuNPs after freeze-drying than when the individual components were used. Repetition tests of freeze-drying and reconstitution were conducted. The sucrose/SEC16 mixture was freeze-dried on an electroless-plated Au film and then analyzed by infrared spectroscopy. Strong interactions between SEC16 and the Au surface were detected, and these interactions appear to play a crucial role in the antiaggregation of AuNPs during freeze-drying.
RESUMEN
Single-cell analyses have recently become important to understand cell heterogeneity, the mechanism of cell function, and diseases. In contrast to single-cell analyses that target nucleic acids, single-cell protein analyses still pose challenges. We have proposed a general concept of integration and extended this concept to the 10-1000 nm scale with femtoliter-picoliter volumes which are smaller than the volume of a single cell exploring ultimate analytical performances (e.g. single-cell target proteomics). However, single-cell shotgun proteomics, which is used to analyze even unknown proteins, is still challenging because there is no digestion column with picoliter volume. The issues were long reaction time (overnight) and much larger reaction volume (microliter) in the conventional bulk method. In this study, an ultra-fast picoliter enzyme reactor using a nanochannel was developed. A device with a channel depth of 300 nm and a volume of 32.4 pL was fabricated. To prevent the self-digestion of trypsin (enzyme), the picoliter enzyme reactor was prepared by immobilizing trypsinogen which was activated to trypsin by enterokinase. The enzyme density obtained by the trypsinogen immobilization process was 2.5 times higher than that obtained by the conventional trypsin immobilization process. Furthermore, the apparent enzyme concentration was 36 times higher due to an extremely high surface-to-volume ratio of the nanochannel, compared to the limit concentration in the bulk. Finally, the enzyme reaction in the picoliter enzyme reactor was accelerated 25 times compared to that in the bulk. Using the picoliter enzyme reactor, protein solution with picoliter volume will be digested without self-digestion and artificial modification, which will greatly contribute to single-cell shotgun proteomics.
Asunto(s)
Reactores Biológicos , Enzimas Inmovilizadas , Proteínas , Proteómica , TripsinaRESUMEN
The interaction forces between silica surfaces modified to different degrees of hydrophobicity were measured using colloidal probe atomic force microscopy (AFM). A highly hydrophobic silica particle was prepared with octadecyltrichlorosilane (OTS), and the interaction forces were measured against silica substrates modified to produce surfaces of varying hydrophobicity. The interaction forces between the highly hydrophobic particle and a completely hydrophilic silicon wafer surface fitted well to the DLVO theory, indicating that no additional (non-DLVO) forces act between the surfaces. When the silicon wafer surface was treated to produce a contact angle of water on surface of 40°, an additional attractive force that is longer ranged than the van der Waals force was observed between the surfaces. The range and magnitude of the attractive force increase with the contact angle of water on the substrate. Beyond the effect on the contact angle, the hydrocarbon chain length and the terminal groups of hydrophobic layer on the substrate only have a minor effect on the magnitude of the force, even when the substrate is terminated with polar carboxyl groups, provided the hydrophobicity of the other surface is high.
RESUMEN
The technique for homogeneously dispersing hydrophobic drugs in a water-soluble solid matrix (solid dispersion) is a subject that has been extensively investigated in the pharmaceutical industry. Herein, a novel technique for dispersing a solid, without the need to use a surfactant, is reported. A freeze-dried amorphous sugar sample was dissolved in an organic solvent, which contained a soluble model hydrophobic component. The suspension of the sugar and the model hydrophobic component was vacuum foam dried to give a solid powder. Four types of sugars and methanol were used as representative sugars and the organic medium. Four model drugs (indomethacin, ibuprofen, gliclazide, and nifedipine) were employed. Differential scanning calorimetry analyses indicated that the sugar and model drug (100:1) did not undergo segregation during the drying process. The dissolution of the hydrophobic drugs in water from the solid dispersion was then evaluated, and the results indicated that the Cmax and AUC0-60 min of the hydrophobic drug in water were increased when the surfactant-free solid dispersion was used. Palatinose and/or α-maltose were superior to the other tested carbohydrates in increasing Cmax and AUC0-60 min for all tested model drugs, and the model drug with a lower water solubility tended to exhibit a greater extent of over-dissolution.
Asunto(s)
Carbohidratos/química , Compuestos Orgánicos/química , Preparaciones Farmacéuticas/química , Tensoactivos/química , Química Farmacéutica/métodos , Portadores de Fármacos/química , Excipientes/química , Liofilización/métodos , Interacciones Hidrofóbicas e Hidrofílicas , Tamaño de la Partícula , Polvos/química , Solubilidad , Solventes/química , Agua/químicaRESUMEN
Protein-stabilizing characteristics of sixteen proteins during freeze-thawing and freeze-drying were investigated. Five enzymes, each with different instabilities against freezing and dehydration, were employed as the protein to be stabilized. Proteinaceous additives generally resulted in greater enzyme stabilization during freeze-thawing than sugars while the degree of stabilization for basic lysozyme and protamine were inferior to that of neutral and acidic proteins. Freeze-drying-induced inactivation of enzyme was also reduced by the presence of a proteinaceous additive, the extent of which was lower than that for a sugar. In both freeze thawing and freeze drying, the enzymes stabilization by the proteinaceous additive increased with increasing additive concentration. The enhancement of enzyme inactivation caused by pH change was also reduced in the presence of proteinaceous additives. The combined use of a sugar such as sucrose and dextran tended to increase the stabilizing effect of the proteinaceous additive.
Asunto(s)
Estabilidad de Enzimas , Muramidasa/química , Proteínas/química , Desecación , Dextranos/química , Liofilización , Concentración de Iones de Hidrógeno , Protaminas/química , Sacarosa/químicaRESUMEN
An indole compound with a strong purple-red color was produced by boiling a solution of indican under acidic conditions and purified by chromatographies on DEAE-650S Toyopearl TSK-gel and silica-gel columns. The purple-red compound purified was identified as indoxyl red, on the basis of FAB Mass, (13)C NMR, (1)H NMR, UV-visible spectra, and IR spectra. Although indoxyl red was first synthesized by Seidel(9) 70 years ago, very little information has been available on its characteristics. We repot here that the compound was purple-red colored at acidic pH and green at pH 13, and showed antiproliferative and cytotoxic activities to the mouse B cell lymphoma cell line NSF202.
Asunto(s)
Indicán/química , Indoles/química , Animales , Antineoplásicos/química , Antineoplásicos/farmacología , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Concentración de Iones de Hidrógeno , Indoles/farmacología , Concentración 50 Inhibidora , Ratones , Estructura MolecularRESUMEN
The recently cloned ß-galactosidase from Bacillus circulans ATCC 31382, designated BgaD, contains a multiple domain architecture including a F5/8 type C domain or a discoidin (DS) domain in the C-terminal peptide region. Here we report that the DS domain plays an essential role in repressing the production of galactooligosaccharides (GOSs). We prepared deletion mutants and point-mutated forms of rBgaD-A (deletion of the BgaD signal peptide) to compare their reaction behaviors. The yields of GOSs for all of the point-mutated forms as well as the deletion mutants of rBgaD-As increased as compared to rBgaD-A. In particular, W1540A mutant BgaD-A (rBgaD-A_W1540A) produced much more GOSs than rBgaD-A. Surface plasmon resonance experiments indicated that both the wild-type and the W1540A mutant DS domains showed high affinity for galactosyllactose. rBgaD-A, which has a wild-type DS domain, showed high hydrolytic activity toward galactosyllactose, while the hydrolytic activities of rBgaD-D, without a DS domain, and rBgaD-A_W1540A, with a mutant DS domain were extremely low. The findings obtained in this study indicate that the wild-type DS domain of rBgaD-A has a function that aids galactosyllactose molecules to be properly oriented within the active site, so that they can be hydrolyzed efficiently to produce galactose/glucose by inhibiting the accumulation of GOSs.
Asunto(s)
Bacillus/enzimología , Proteínas Bacterianas/metabolismo , Galactósidos/biosíntesis , beta-Galactosidasa/metabolismo , Secuencia de Aminoácidos , Sustitución de Aminoácidos , Bacillus/genética , Proteínas Bacterianas/química , Proteínas Bacterianas/genética , Discoidinas , Escherichia coli/genética , Galactosa/biosíntesis , Lactosa/biosíntesis , Lectinas/química , Lectinas/genética , Lectinas/metabolismo , Datos de Secuencia Molecular , Mutación , Estructura Terciaria de Proteína , Proteínas Protozoarias/química , Proteínas Protozoarias/genética , Proteínas Protozoarias/metabolismo , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Alineación de Secuencia , Relación Estructura-Actividad , beta-Galactosidasa/química , beta-Galactosidasa/genéticaRESUMEN
The presence of multiple types of ß-galactosidases in a commercial enzyme preparation from Bacillus circulans ATCC 31382 and differences in their transgalactosylation activity were investigated. Four ß-galactosidases, ß-Gal-A, ß-Gal-B, ß-Gal-C, and ß-Gal-D, which were immunologically homologous, were isolated and characterized. The N-terminal amino acid sequences of all of the enzymes were identical and biochemical characteristics were similar, except for galactooligosaccharide production. ß-Gal-B, ß-Gal-C, and ß-Gal-D produced mainly tri- and tetra saccharides at maximum yields of 20-30 and 9-12%, while ß-Gal-A produced trisaccharide with 7% with 5% lactose as substrate. The Lineweaver-Burk plots for all of the enzymes, except for ß-Gal-A, showed biphasic behavior. ß-Gal-A was truncated to yield multiple ß-galactosidases by treatment with protease isolated from the culture broth of B. circulans. Treatment of ß-Gal-A with trypsin yielded an active 91-kDa protein composed of 21-kDa and 70-kDa proteins with characteristics similar to those for ß-Gal-D.
Asunto(s)
Bacillus/metabolismo , Homología de Secuencia de Aminoácido , beta-Galactosidasa/biosíntesis , beta-Galactosidasa/química , Secuencia de Aminoácidos , Animales , Bacillus/enzimología , Bovinos , Estabilidad de Enzimas , Galactosa/metabolismo , Isoenzimas/biosíntesis , Isoenzimas/química , Isoenzimas/aislamiento & purificación , Isoenzimas/metabolismo , Cinética , Lactosa/metabolismo , Datos de Secuencia Molecular , Peso Molecular , Tripsina/metabolismo , beta-Galactosidasa/aislamiento & purificación , beta-Galactosidasa/metabolismoRESUMEN
A gene of ß-galactosidase from Bacillus circulans ATCC 31382 was cloned and sequenced on the basis of N-terminal and internal peptide sequences isolated from a commercial enzyme preparation, Biolacta(®). Using the cloned gene, recombinant ß-galactosidase and its deletion mutants were overexpressed as His-tagged proteins in Escherichia coli cells and the enzymes expressed were characterized.
Asunto(s)
Bacillus/genética , Proteínas Bacterianas/metabolismo , Isoenzimas/metabolismo , Proteínas Recombinantes/metabolismo , beta-Galactosidasa/metabolismo , Secuencias de Aminoácidos , Bacillus/enzimología , Proteínas Bacterianas/genética , Clonación Molecular , ADN Bacteriano , Escherichia coli , Isoenzimas/genética , Lactosa/metabolismo , Plásmidos , Proteínas Recombinantes/genética , Mapeo Restrictivo , Homología de Secuencia de Aminoácido , Transformación Bacteriana , beta-Galactosidasa/genéticaRESUMEN
Optimized conditions are needed to refold recombinant proteins from bacterial inclusion bodies into their biologically active conformations. In this study, we found two crucial requirements for efficient refolding of cationic tetrameric chicken avidin. The first step is to eliminate nucleic acid contaminants from the bacterial inclusion body. The electrostatic interactions between the remaining nucleic acids and proteins strongly enhanced protein aggregation during the refolding process. The cysteine specific reversible S-cationization procedure was successfully employed for large-scale preparation of nucleic acid free denatured protein without purification tag system. The second step is the intramolecular disulfide formation prior to refolding in dialysis removing denaturant. Disulfide intact monomeric avidin showed efficient formation of biologically active tetrameric conformation during the refolding process. Using this optimized refolding procedure, highly cationic avidin derivative designed as an intracellular delivery carrier of biotinylated protein was successfully prepared.
Asunto(s)
Avidina , Proteínas Recombinantes , Animales , Avidina/química , Avidina/aislamiento & purificación , Avidina/metabolismo , Pollos , Disulfuros/química , Cuerpos de Inclusión/química , Oxidación-Reducción , Replegamiento Proteico , Proteínas Recombinantes/química , Proteínas Recombinantes/aislamiento & purificación , Proteínas Recombinantes/metabolismoRESUMEN
We investigated an alternate technique to coat the surface with a protein having no surface affinity, without the use of any exotic chemical agents. An external electric field was utilized to prepare the protein coating on a metal substrate. Stainless steel (St) substrate and lysozyme (LSZ) were used as the surface to be coated and the model non-adsorptive protein, respectively. Dynamics of the adsorption of LSZ on the St surface in the presence and absence of an external electric potential (EEP) were monitored by in-situ ellipsometry. Applying negative surface potential (-0.4 V vs Ag/AgCl) forced the adsorption of LSZ onto the St surface where LSZ did not adsorb without applying any EEP. The repetition of the EEP-application and -cut-off indicated the controllability of the LSZ coating amount depending on the total duration of the EEP-application. The coated LSZ largely remained bound to the surface even by the cut-off of the external electric field, the ratio of which to the detached amount was roughly constant (approximately 7:3). Furthermore, the LSZ coated surface on the St substrate was found to be reversibly switched between being affinitive and non-affinitive to a typical model protein adsorbate (bovine serum albumin) by the EEP-application and cut-off.
Asunto(s)
Proteínas de la Membrana/química , Adsorción , Electricidad , Muramidasa/química , Acero Inoxidable , Propiedades de SuperficieRESUMEN
We report here on the purification, characterization, molecular cloning, and expression of a new aminoacylase, initially isolated from the supernatant of Streptomyces mobaraensis (Sm-AA). Purified wild-type Sm-AA was found to be a monomeric protein with a molecular mass of 55 kDa. The cloned gene of Sm-AA contained an ORF of 1,383 bp, encoding a polypeptide of 460 amino acids. A BLAST search revealed that Sm-AA belongs to the peptidase M20 family, with identities to a hypothetical protein from Streptomyces pristinaespiralis, a putative peptidase from Streptomyces avermitilis, peptidase M20 from Frankia sp., succinyl-diaminopimelate desuccinylase from Hemophilus influenzae, and aminoacylase-1 from porcine kidney at 89, 88, 67, 29, and 25% respectively. The Sm-AA gene was subcloned into an expression vector, pSH19, and was expressed in Streptomyces lividans TK24. The amount of the recombinant Sm-AA expressed in the S. lividans cells was approximately 42-fold higher than that of Sm-AA found in the supernatant of S. mobaraensis. Sm-AA showed high hydrolytic activity towards various N-acetyl-L-amino acids and N-(middle/long)-chain-fatty-acyl-L-amino acids, with a preference for the acyl derivatives of L-Met, L-Ala, L-Cys, etc. with an optimum pH and temperature for reaction of about 7.5 and 50 degrees Celsius (at pH 7.5).
Asunto(s)
Amidohidrolasas/aislamiento & purificación , Aminoácidos/metabolismo , Ácidos Grasos/metabolismo , Streptomyces/enzimología , Amidohidrolasas/química , Amidohidrolasas/genética , Secuencia de Aminoácidos , Secuencia de Bases , Cromatografía por Intercambio Iónico , Clonación Molecular , Medios de Cultivo , Cartilla de ADN , Electroforesis en Gel de Poliacrilamida , Hidrólisis , Datos de Secuencia Molecular , Reacción en Cadena de la Polimerasa , Homología de Secuencia de AminoácidoRESUMEN
An amorphous sugar matrix, after drying from an organic solvent, was investigated for use as a method for dispersing hydrophobic drugs (solid dispersion). However, the amorphous sugar, originally contained in the organic solvent, had a significantly low glass transition temperature (Tg), thus rendering it physically unstable. In this study, we examined the physicochemical properties of a sugar in a dried matrix and in an organic solvent, using α-maltose and methanol as a representative sugar and organic solvent. The apparent molar volume of α-maltose was â¼30% smaller in methanol than in water. The methanol-originated amorphous α-maltose exhibited a much greater degree of hydrogen bonding than the water-originated one. Considering these findings, we conclude that the α-maltose maintained its compact conformation in the dried state and consequently caused the markedly low Tg. Second, it was found that heating under appropriate conditions resulted in an increase in the Tg of the methanol-originated amorphous α-maltose as well as a decrease in the level of hydrogen bonding. The aqueous dissolution of 2 model hydrophobic drugs (indomethacin and ibuprofen) from the solid dispersion was also improved as the result of the heat treatment, whereas, to the contrary, the dissolution of another model drug (curcumin) was lowered.
Asunto(s)
Composición de Medicamentos/métodos , Excipientes/química , Rastreo Diferencial de Calorimetría , Química Farmacéutica , Curcumina/administración & dosificación , Curcumina/química , Curcumina/farmacocinética , Desecación , Estabilidad de Medicamentos , Calor/efectos adversos , Interacciones Hidrofóbicas e Hidrofílicas , Ibuprofeno/administración & dosificación , Ibuprofeno/química , Ibuprofeno/farmacocinética , Indometacina/administración & dosificación , Indometacina/química , Indometacina/farmacocinética , Maltosa/química , Metanol/química , Transición de Fase , Solubilidad , Solventes/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
The impact of a polymer additive (polyvinylpyrrolidone, PVP) on hydrogen bonding in amorphous sugar matrices as well as on the glass transition temperature, T(g), were examined by temperature scanning Fourier transform infrared spectroscopy (TS-FTIR). An amorphous sugar matrix containing PVP was prepared by air-drying an aqueous solution of a sugar-PVP mixture. The hydrogen bonds in the sugar-PVP mixture (sugar-PVP and sugar-sugar hydrogen bonds) were analyzed from the IR peak positions corresponding to the stretching vibration of C==O groups of PVP and O--H groups of the sugar and the temperature dependence of the peak position of the O--H stretching vibration band. The addition of PVP to amorphous mono and disaccharides significantly lowered the extent of hydrogen bond formation while interactions between sugars and the PVP tended to prevent the disruption of hydrogen bonds due to increasing temperature, the magnitude of which was larger for larger oligomers. The T(g) value for the amorphous sugar was increased by the addition of PVP in many cases. As the size of sugar molecule became larger, the relative magnitude of the increased T(g) by PVP to the difference between the T(g) values for sugar alone and PVP alone became larger and then reached a certain level; it was slight in the case of glucose. Collectively, these results demonstrate that the magnitude of the impact of PVP on an amorphous sugar matrix strongly vary and are dependent on the types of sugar.
Asunto(s)
Carbohidratos/química , Polímeros/química , Rastreo Diferencial de Calorimetría , Cristalización , Enlace de Hidrógeno , Povidona/química , Espectrofotometría Infrarroja , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , VibraciónRESUMEN
The characteristics of hydrogen bond formation between trehalose and polyvinylpyrrolidone (PVP) in amorphous mixtures at different hydration states were quantitatively investigated. Amorphous trehalose-PVP mixtures were prepared by freeze-drying and equilibrated at different relative humidities (RH). Infrared (IR) spectra of the trehalose-PVP mixtures were obtained by Fourier transform IR spectroscopy,(FTIR) and the IR band corresponding to C=O groups of PVP was deconvolved into the component bands responsible for C=O groups that were free and restricted by hydrogen bonds, to estimate the degree of the trehalose-PVP interactions. The FTIR analysis indicated that approximately 80% of the C=O groups of PVP formed hydrogen bonds with trehalose in the presence of more than 3 g of trehalose per gramme of PVP, independent of the RH. IR analysis of the O--H stretching vibration of the sugar demonstrated that the presence of PVP lead to an increase in the free hydroxyl groups of trehalose that did not form hydrogen bonds at RH 0%. On the other hand, the water sorption behavior of the trehalose-PVP mixtures suggested that rehumidification diminished the effect of PVP on increasing the free OH groups. Thus a peculiar relationship may exist between Tg, RH and the composition of the mixture: The presence of PVP increased Tg at RHs 0 and above 23% but decreased Tg at 11%.
Asunto(s)
Carbohidratos/química , Polímeros/química , Rastreo Diferencial de Calorimetría , Liofilización , Vidrio , Enlace de Hidrógeno , Espectroscopía Infrarroja por Transformada de Fourier , TemperaturaRESUMEN
The effect of the properties of a protein on its adsorption to a metal surface in the presence of external electric potential was investigated. Protein adsorption processes at different surface potentials were measured for fifteen types of proteins using an in-situ ellipsometry. The tested proteins were classified into three groups, based on the amount of protein that was adsorbed as a function of the surface potential: In First group of proteins, an increasing trend for the amount adsorbed with a more positive surface potential was found; The amount adsorbed of α-chymotrypsinogen A and ribonuclease A (Second group) were roughly constant and independent of the applied surface electric potentials; In Third group, the amount adsorbed decreased with increasing surface potential. This protein classification was correlated with the isoelectric points of the proteins (First group: ≤9.3; Second group: 9.3-10; Third group: >10). Increasing the pH positively and negatively shifted the surface potentials, allowing ß-lactoglobulin (First group) and lysozyme (Third) to become adsorbed, respectively. The surface potential range for protein adsorption was also markedly shifted depending on the metal substrate type. These findings were interpreted based on the electrostatic interactions among the protein, surface hydroxyl groups, and the applied external electric field.
Asunto(s)
Metales/química , Proteínas/química , Quimotripsinógeno/química , Punto Isoeléctrico , Ribonucleasa Pancreática/química , Electricidad EstáticaRESUMEN
Glutathione S-transferase genetically fused with an affinity peptide tag, PS19 (RAFIASRRIKRP) having a specific affinity for a hydrophilic polystyrene (PS) surface, was preferentially immobilized on a hydrophilic PS (phi-PS) plate without suffering from interference by coexisting protein molecules. Furthermore, rabbit IgG chemically conjugated with a peptide, KPS19R10, in which (10)Lys in PS19 was replaced with Arg and one Lys residue was added at the N-terminus as a coupling site for glutaraldehyde, showed a higher immobilization affinity to the phi-PS plate than that conjugated with the PS19 peptide. On the basis of these findings, the use of a phi-PS plate and peptide tag-linked ligand proteins permitted a one-step or two-step enzyme-linked immunosorbent assay (ELISA) to be achieved, resulting in a substantial reduction in operational time compared with the conventional ELISA method using a hydrophobic PS (pho-PS) plate, while maintaining a high sensitivity. Furthermore, the sensitivity was increased to a greater extent compared to the conventional ELISA meihod when the one-step ELISA was applied to the detection of bovine insulin in a sandwich mode, due to the reduced number of washing and incubation steps. The method proposed here would be a versatile method for use in various ELISA techniques such as sandwich and competitive ELISAs using an antigen, an antibody and streptavidin that are genetically fused or chemically conjugated with the PS-specific affinity peptide as the ligand protein.
Asunto(s)
Marcadores de Afinidad , Ensayo de Inmunoadsorción Enzimática/instrumentación , Ensayo de Inmunoadsorción Enzimática/métodos , Péptidos/metabolismo , Poliestirenos/química , Animales , Anticuerpos/inmunología , Antígenos/inmunología , Arginina/genética , Unión Competitiva , Biotinilación , Bovinos , Glutatión Transferasa/análisis , Interacciones Hidrofóbicas e Hidrofílicas , Insulina/análisis , Ligandos , Lisina/genética , Conejos , Proteínas Recombinantes de Fusión/metabolismo , Albúmina Sérica Bovina/metabolismo , Estreptavidina/metabolismoRESUMEN
We report on the molecular cloning and characterization of penicillin V acylase (PVA) from an actinomycete, Streptomyces mobaraensis (Sm-PVA), which was originally isolated as an acylase that efficiently hydrolyzes the amide bond of various N-fatty-acyl-l-amino acids and N-fatty-acyl-peptides as well as capsaicin (8-methyl-N-vanillyl-6-nonenamide). In addition, the purified Sm-PVA hydrolyzed penicillin V with the highest activity (k(cat)) among the PVAs so far reported, penicillin G, and 2-nitro-5-phenoxyacetamide benzoic acid. The BLAST search revealed that the Sm-PVA precursor is composed of a polypeptide that is characteristic of enzymes belonging to the beta-lactam acylase family with four distinct segments; a signal sequence (43 amino acids), an alpha subunit (173 amino acids), a linker peptide (28 amino acids), and a beta subunit (570 amino acids). The mature, active Sm-PVA is a heterodimeric protein with alpha and beta subunits, in contrast to PVAs isolated from Bacillus sphaericus and B. subtilis, which have a homotetrameric structure. The amino acid sequence of Sm-PVA showed identities to PVA from S. lavendulae, N-acylhomoserine lactone-degrading acylase from Streptomyces sp., cyclic lipopeptide acylase from Streptomyces sp., and aculeacin A acylase from Actinoplanes utahensis with 68, 67, 67, and 41% identities, respectively.
Asunto(s)
Penicilina Amidasa/genética , Streptomyces/enzimología , Secuencia de Aminoácidos , Secuencia de Bases , Clonación Molecular , ADN Bacteriano/genética , Datos de Secuencia Molecular , Penicilina Amidasa/aislamiento & purificación , Alineación de Secuencia , Análisis de Secuencia de ADN , Streptomyces/genéticaRESUMEN
A sandwich ELISA method using peptide tags showing a specific affinity to a hydrophilic polystyrene surface (PS-tags), PS 19 composed of RAFIASRRIKRP and KPS19R10 of KRAFIASRRIRRP and a hydrophilic polystyrene (phi-PS) plate was used to analyze protein-protein interactions. An Escherichia coli cysteine synthase complex, in which serine acetyltransferase (SAT) interacts with O-acetylserine sulfhydrylase-A (OASS) was used as a model system. When the interaction was detected by the conventional sandwich ELISA method using a hydrophobic polystyrene (pho-PS) plate, for the exclusive use of ELISA, the signal intensity was barely detectable due to conformational change of the ligand protein, OASS in the adsorbed state. On the contrary, when OASS, genetically fused with PS19 (OASS-PS19) or chemically conjugated with KPS19R10 (OASS-KPS19R10), was immobilized on the phi-PS plate, a high signal intensity was detected. Furthermore, by applying the two-step sandwich ELISA, in which OASS-PS19 or OASS-KPS19R10 formed a complex with SAT in the blocking solution before immobilization on the phi-PS plate, the signal intensity was further increased with a much shorter operational time, because SAT in the blocking solution formed a complex with OASS-PS19 or OASS-KPS19R10 without any steric hindrance.