Lipid Nanoparticle and Liposome Reference Materials: Assessment of Size Homogeneity and Long-Term -70 °C and 4 °C Storage Stability.

With recent advances and anticipated proliferation of lipid nanoparticle (LNP)-delivered vaccines and therapeutics, there is a need for the availability of internationally recognized reference materials of LNP systems. Accordingly, we developed six LNP and liposome (anionic, neutral, and cationic each) candidate reference material formulations and thoroughly characterized by dynamic light scattering their particle hydrodynamic size (Z-avr) and polydispersity. We also evaluated the particle size homogeneity and long-term -70 °C and 4 °C storage stability using multiple large sets of randomly selected vials for each formulation. The formulations stored at -70 °C remained stable and homogeneous for a minimum of 9 months. The Z-avr relative combined uncertainty and the long-term variability were both <1.3% for liposome formulations and anionic LNPs, (3.9% and 1.7%) for neutral LNPs, and (6.7% and 4.4%) for cationic LNPs. An inadvertent few-hour-long storage temperature increase to -35 °C due to a freezer malfunction resulted in a small change of the size and size distribution of anionic liposomes and LNPs but, unexpectedly, a larger size increase of the neutral and cationic liposomes (≤5%) and LNPs (≤25%). The mean Z-avr values of the LNPs stored at 4 °C appeared to slowly increase with t1/3, where t is the storage time, and the Z-avr between-vial heterogeneity and mean polydispersity index values appeared to decrease; no change was observed for liposomes. The size and size distribution evolution of LNPs stored at 4 °C was attributed to an incomplete equilibration of the formulations following the addition of sucrose prior to the initial freezing. Such a process of size increase and size distribution narrowing has not been previously discussed nor observed in the context of LNPs.

Thickness measurements of graphene oxide flakes using atomic force microscopy: results of an international interlaboratory comparison.

Flake thickness is one of the defining properties of graphene-related 2D materials (GR2Ms), and therefore requires reliable, accurate, and reproducible measurements with well-understood uncertainties. This is needed regardless of the production method or manufacturer because it is important for all GR2M products to be globally comparable. An international interlaboratory comparison on thickness measurements of graphene oxide flakes using atomic force microscopy has been completed in technical working area 41 of versailles project on advanced materials and standards. Twelve laboratories participated in the comparison project, led by NIM, China, to improve the equivalence of thickness measurement for two-dimensional flakes. The measurement methods, uncertainty evaluation and a comparison of the results and analysis are reported in this manuscript. The data and results of this project will be directly used to support the development of an ISO standard.

Assessment of stability of sulphated lactosyl archaeol archaeosomes for use as a vaccine adjuvant.

Archaeosomes, composed of sulphated lactosyl archaeol (SLA) glycolipids, have been proven to be an effective vaccine adjuvant in multiple preclinical models of infectious disease or cancer. In addition to efficacy, the stability of vaccine components including the adjuvant is an important parameter to consider when developing novel vaccine formulations. To properly evaluate the potential of SLA glycolipids to be used as vaccine adjuvants in a clinical setting, a comprehensive evaluation of their stability is required. Herein, we evaluated the long term stability of preformed empty SLA archaeosomes prior to admixing with antigen at 4 °C or 37 °C for up to 6 months. In addition, the stability of adjuvant and antigen was evaluated for up to 1 month following admixing. Multiple analytical parameters evaluating the molecular integrity of SLA and the liposomal profile were assessed. Following incubation at 4 °C or 37 °C, the SLA glycolipid did not show any pattern of degradation as determined by mass spectroscopy, nuclear magnetic resonance (NMR) and thin layer chromatography (TLC). In addition, SLA archaeosome vesicle characteristics, such as size, zeta potential, membrane fluidity and vesicular morphology, were largely consistent throughout the course of the study. Importantly, following storage for 6 months at both 4 °C and 37 °C, the adjuvant properties of empty SLA archaeosomes were unchanged, and following admixing with antigen, the immunogenicity of the vaccine formulations was also unchanged when stored at both 4 °C and 37 °C for up to 1 month. Overall this indicates that SLA archaeosomes are highly stable adjuvants that retain their activity over an extended period of time even when stored at high temperatures.

Multiphoton laser-induced confined chemical changes in polymer films.

We report ultrafast-laser-induced photochemical, structural, and morphological changes in a polyimide film irradiated at the polymer-glass interface in back-incident geometry. Back-illumination creates locally hot material at the interface leading to a confined photochemical change at the interface and a morphological change through a blister formation. The laser-induced photochemical changes in polyimide resulted in new absorption and luminescence properties in the visible region. The laser-treated polyimide exhibited photoluminescence anisotropy resulting from formation of ordered polymer upon irradiation by linearly polarized ultrashort laser pulses. Confocal fluorescence microscopy resulted in similar observations to the bulk. Reflection-absorption infrared spectroscopy and X-ray photoelectron spectroscopy together indicated confinement of laser-induced chemical changes at the interface.

Quantification of surface functional groups on silica nanoparticles: comparison of thermogravimetric analysis and quantitative NMR.

Thermogravimetric analysis (TGA) coupled with evolved gas analysis-FT-IR has been examined as a potential method to study the functional group content for surface modified silica nanoparticles. A comparison with a quantitative solution NMR method based on analysis of groups released after dissolution of the silica matrix is used to provide benchmark data for comparison and to assess the utility and limitations of TGA. This study focused primarily on commercially available silicas and tested whether it was possible to use a correction based on bare silica to account for the significant mass loss that occurs due to condensation of surface hydroxyl groups and loss of matrix-entrapped components at temperatures above ∼200 °C. Although this approach has been used successfully in the literature for in-house prepared samples, it was problematic for commercial silicas prepared by the Stöber method. For these materials the agreement between estimates from qNMR and TGA mass loss was poor in many cases. However much better agreement was observed for samples for which the mass loss above 200 °C is relatively low, such as non-porous silica, or samples for which the mass fraction of functional group is large (e.g., high molecule weight groups or multilayers). FT-IR was useful in identifying the likely structure of the components lost from the surface at various temperatures and in some cases provided evidence of contaminants in the sample. Nevertheless, in other cases correlation of thermograms and FT-IR with NMR data was necessary, particularly for samples where multi-step modification of the silica surface results in incomplete functionalization that gives a mixture of products. Overall the results indicate that TGA provides reliable results for silicas of low porosity or those for which the functional group accounts for a significant fraction of the total sample mass. It is also suitable as a supplementary or screening technique to indicate the presence of coatings or covalent surface modification, prior to applying other techniques or for routine analyses where sensitivity is not critical.

In vitro evaluation of archaeosome vehicles for transdermal vaccine delivery.

Archaeosomes composed of archaeal total polar lipids (TPL) or semi-synthetic analog vesicles have been used as vaccine adjuvants and delivery systems in animal models for many years. Typically administered by intramuscular or subcutaneous injections, archaeosomes can induce robust, long-lasting humoral and cell-mediated immune responses against entrapped antigens and provide protection in murine models of infectious disease and cancer. Herein, we evaluated various archaeosomes for transdermal delivery, since this route may help eliminate needle-stick injuries and needle re-use, and therefore increase patient compliance. Archaeosomes composed of TPL from different archaea (Halobacterium salinarum, Methanobrevibacter smithii, Haloferax volcanii) and various semi-synthetic glycolipid combinations were evaluated for their ability to diffuse across the skin barrier using an ex vivo pig skin model and the results were compared to conventional synthetic ester liposomes. Physicochemical characteristics were determined for selected formulations including vesicle size, size distribution, zeta potential, fluidity, antigen (ovalbumin) incorporation efficiency and release. Archaeosomes, in particular those composed of M. smithii TPL or the synthetic glycolipid sulfated S-lactosylarchaeol (SLA) mixed with uncharged glycolipid lactosyl archaeol (LA), appeared to be effective carriers for ovalbumin, achieving much better antigen distribution and vesicle accumulation in the skin epidermis than conventional liposomes. The enhanced skin permeation of archaeosomes may be attributed to their chemical structure and physicochemical properties such as particle size, surface charge, stability, and fluidity of their lipid bilayer.

Ensemble and Single Particle Fluorescence Characterization of Dye-Labeled Cellulose Nanocrystals.

Cellulose nanocrystals (CNCs) have been covalently labeled with both fluorescein and rhodamine and studied by a combination of UV-vis absorption spectroscopy and ensemble and single molecule fluorescence spectroscopy. For all samples, the fluorescence anisotropy and lifetimes were consistent with effects expected for covalently bound dye molecules. Low dye loading levels (∼0.1 dye/particle) were estimated for the fluorescein-labeled CNC which coupled with the strong pH dependence make this a less suitable fluorophore for most applications. Rhodamine-labeled CNCs were prepared from both sulfated and carboxylated CNCs and had loading levels that varied from 0.25 to ∼15 dye molecules/CNC. For the sulfated samples, the absorption due to (nonfluorescent) dimeric dye increased with dye loading; in contrast, the carboxylated sample, which had the highest rhodamine content, had a low dimer yield. Single particle fluorescence studies for two of the rhodamine-labeled CNCs demonstrated that individual particles are readily detected by their stepwise blinking/bleaching behavior and by polarization effects. Overall, the results indicate the importance of understanding the effects of loading on dye photophysics to select an optimal dye concentration to maximize sensitivity while minimizing the effect of the dye on the CNC behavior. The results also demonstrate that CNCs with relatively low dye loadings (e.g., ∼1 dye/particle) are readily detectable by fluorescence and should be adequate for use in fluorescence-based biological assays or to probe the distribution of CNCs in composite materials.

Correlating Cellulose Nanocrystal Particle Size and Surface Area.

Cellulose nanocrystals (CNCs) are negatively charged nanorods that present challenges for characterization of particle size distribution and surface area-two of the common parameters for characterizing nanomaterials. CNC size distributions have been measured by two microscopy methods: atomic force microscopy (AFM) and transmission electron microscopy (TEM). The agreement between the two methods is good for length measurements, after taking into consideration tip-convolution effects for AFM. However, TEM widths are almost twice as large as AFM heights-an effect that we hypothesize is due to counting of a larger fraction of laterally associated CNCs in the TEM images. Overall, the difficulty of selecting individual particles for analysis and possible bias due to selection of a specific particle size during sample deposition are the main limitations associated with the microscopy measurements. The microscopy results were compared to Z-average data from dynamic light scattering, which is a useful method for routine analysis and for examining trends in size as a function of sample treatment. Measurements as a function of sonication energy were used to provide information on the presence of aggregates in the sample. Magic-angle-spinning solid-state NMR was employed to estimate the surface area of CNCs based on the ratio of integrated spectral intensities of resonances stemming from C4 sites at the crystallite surfaces and from all C4 sites. Our approach was adapted from the application of solid-state NMR to characterize larger cellulose microfibers and appears to provide a useful estimate that overcomes the limitations of using the BET method for measuring surface areas of highly aggregated nanomaterials. The solid-state NMR results show that the lateral dimension of the CNCs is consistent with that of elementary cellulose crystallites.

Membrane order parameters for interdigitated lipid bilayers measured via polarized total-internal-reflection fluorescence microscopy.

Incorporating ethanol in lipid membranes leads to changes in bilayer structure, including the formation of an interdigitated phase. We have used polarized total-internal-reflection fluorescence microscopy (pTIRFM) to measure the order parameter for Texas Red DHPE incorporated in the ethanol-induced interdigitated phase (LßI) formed from ternary lipid mixtures comprising dioleoylphosphatidylcholine, cholesterol and egg sphingomyelin or dipalmitoylphosphatidylcholine. These lipid mixtures have 3 co-existing phases in the presence of ethanol: liquid-ordered, liquid-disordered and LßI. pTIRFM using Texas Red DHPE shows a reversal in fluorescence contrast between the LßI phase and the surrounding disordered phase with changes in the polarization angle. The contrast reversal is due to changes in the orientation of the dye, and provides a rapid method to identify the LßI phase. The measured order parameters for the LßI phase are consistent with a highly ordered membrane environment, similar to a gel phase. An acyl-chain labeled BODIPY-FL-PC was also tested for pTIRFM studies of ethanol-treated bilayers; however, this probe is less useful since the order parameters of the interdigitated phase are consistent with orientations that are close to random, either due to local membrane disorder or to a mixture of extended and looping conformations in which the fluorophore is localized in the polar headgroup region of the bilayer. In summary, we demonstrate that order parameter measurements via pTIRFM using Texas Red-DHPE can rapidly identify the interdigitated phase in supported bilayers. We anticipate that this technique will aid further research in the effects of alcohols and other additives on membranes.

Changes in order parameters associated with ceramide-mediated membrane reorganization measured using pTIRFM.

The enzymatic generation of ceramide has significant effects on the biophysical properties of lipid bilayers and can lead to the extensive reorganization of cell membranes. We have synthesized and characterized a headgroup-labeled fluorescent lipid probe (NBD-ceramide, NBD-Cer) and demonstrated that it can be used for polarized total internal reflection fluorescence microscopy experiments to probe changes in membrane order that result from ceramide incorporation. NBD-Cer measures significantly higher order parameters for the liquid-ordered (Lo) domains ([P2] = 0.40 ± 0.03) than for the liquid-disordered phase (Ld, fluid, [P2] = 0.22 ± 0.02) of phase-separated bilayers prepared from egg sphingomyelin, dioleolyphosphatidylcholine, and cholesterol mixtures. The probe also responds to changes in packing induced by the direct incorporation of ceramide or the variation in the ionic strength of the aqueous medium. Order parameter maps obtained after enzyme treatment of bilayers with coexisting Lo and Ld phases show two distinct types of behavior. In regions of high enzyme activity, the initial Lo/Ld domains are replaced by large, dark features that have high membrane order corroborating previous hypotheses that these are ceramide-enriched regions of the membrane. In areas of low enzyme activity, the size and shape of the Lo domains are conserved, but there is an increase in the order parameter for the initial Ld phase ([P2] = 0.30 ± 0.01). This is attributed to the incorporation of ceramide in the Lo domains with the concomitant expulsion of cholesterol into the surrounding fluid phase, increasing its order parameter.

Development of lipid nanoparticles and liposomes reference materials (II): cytotoxic profiles.

Lipid based nanocarriers are one of the most effective drug delivery systems that is evident from the recent COVID-19 mRNA vaccines. The main objective of this study was to evaluate toxicity of six lipid based formulations with three surface charges-anionic, neutral or cationic, to establish certified reference materials (CRMs) for liposomes and siRNA loaded lipid nanoparticles (LNP-siRNA). Cytotoxicity was assessed by a proliferation assay in adherent and non-adherent cell lines. High concentration of three LNP-siRNAs did not affect viability of suspension cells and LNP-siRNAs were non-toxic to adherent cells at conventionally used concentration. Systematic evaluation using multiple vials and repeated test runs of three liposomes and three LNP-siRNA formulations showed no toxicity in HL60 and A549 cells up to 128 and 16 µg/mL, respectively. Extended treatment and low concentration of LNPs did not affect the viability of suspension cells and adherent cells at 96 h. Interestingly, 80% of A549 and HL60 cells in 3D conditions were viable when treated with cationic LNP-siRNA for 48 h. Taken together, anionic, cationic and neutral lipid formulations were non-toxic to cells and may be explored further in order to develop them as drug carriers.

Supported lipid bilayers on biocompatible polysaccharide multilayers.

Formation of supported lipid bilayers on soft polymer cushions is a useful approach to decouple the membrane from the substrate for applications involving membrane proteins. We prepared biocompatible polymer cushions by the layer-by-layer assembly of two polysaccharide polyelectrolytes, chitosan (CHI) and hyaluronic acid, on glass and silicon substrates. (CHI/HA)(5) films were characterized by atomic force microscopy, giving an average thickness of 57 nm and roughness of 25 nm in aqueous solution at pH 6.5. Formation of zwitterionic lipid bilayers by the vesicle fusion method was attempted using DOPC vesicles at pH 4 and 6.5 on (CHI/HA)(5) films. At higher pH adsorbed lipids had low mobility and large immobile lipid fractions; a combination of fluorescence and AFM indicated that this was attributable to formation of poor quality membranes with defects and pinned lipids rather than to a layer of surface-adsorbed vesicles. By contrast, more uniform bilayers with mobile lipids were produced at pH 4. Fluorescence recovery after photobleaching gave diffusion coefficients that were similar to those for bilayers on PEG cushions and considerably higher than those measured on other polyelectrolyte films. The results suggest that the polymer surface charge is more important than the surface roughness in controlling formation of mobile supported bilayers. These results demonstrate that polysaccharides provide a useful alternative to other polymer cushions, particularly for applications where biocompatibility is important.

Single-domain antibody bioconjugated near-IR quantum dots for targeted cellular imaging of pancreatic cancer.

Successful targeted imaging of BxPC3 human pancreatic cancer cells is feasible with near-IR CdTeSe/CdS quantum dots (QDs) functionalized with single-domain antibody (sdAb) 2A3. For specific targeting, sdAbs are superior to conventional antibodies, especially in terms of stability, aggregation, and production cost. The bright CdTeSe/CdS QDs were synthesized to emit in the diagnostic window of 650-900 nm with a narrow emission band. 2A3 was derived from llama and is small in size of 13 kDa, but with fully-functional recognition to the target carcinoembryonic antigen-related cell adhesion molecule 6 (CEACAM6), a possible biomarker as a therapeutic target of pancreatic cancer. For compelling imaging, optical may be the most sensible among the various imaging modalities, regarding the sensitivity and cost. This first report on sdAb-conjugated near-IR QDs with high signal to background sensitivity for targeted cellular imaging brings insights into the development of optical molecular imaging for early stage cancer diagnosis.

Influence of bound dodecanoic acid on the reconstitution of albumin nanoparticles from a lyophilized state.

The development of reference standards for nanoparticle sizing allows for cross laboratory studies and effective transfer of particle sizing methodology. To facilitate this, these reference standards must be stable upon long-term storage. Here, we examine factors that influence the properties of cross-linked albumin nanoparticles, fabricated with an ethanol desolvation method, when reconstituted from a lyophilized state. We demonstrate, with nanoparticle tracking analysis, no significant changes in mean particle diameter upon reconstitution of albumin nanoparticles fabricated with bovine serum albumin loaded with dodecanoic acid, when compared to nanoparticles fabricated with a fatty acid-free BSA. We attribute this stability to the modulation of nanoparticle charge-charge interactions at dodecanoic acid specific binding locations. Furthermore, we demonstrate this in a lyophilized state over six months when stored at - 80 °C. We also show that the reconstitution process is readily transferable between technicians and laboratories and further confirm our finding with dynamic light scattering analysis.

Conformational Order in Aggregated rra-P3HT as an Indicator of Quality of Boron Nitride Nanotubes.

We report on investigation, by correlated polarized excitation fluorescence microscopy (PEFM) and atomic force microscopy (AFM) imaging, of the conformational order of regiorandom poly(3-hexyl-thiophene) (rra-P3HT) aggregated on two boron nitride nanotube (BNNT) materials (BNNT-2 and BNNT-3) processed by different purification methods. rra-P3HT photoluminescence excited by linearly polarized light shows polarization direction-dependent intensity with a modulation depth, M, generally >0.5 for rra-P3HT on nanotubes and <0.5 for rra-P3HT on nontubular impurities. PEFM-measured modulation depth value distributions can be decomposed into two components, one corresponding to ordered rra-P3HT on nanotubes and the other to disordered rra-P3HT on impurities. The nanotube component peaks at M = 0.64 and 0.70 and comprises 60% and 78% of the normalized distribution for rra-P3HT on BNNT-2 and BNNT-3, respectively, indicating higher quality and higher fraction of nanotubes in the latter material. The method can be integrated in a material development platform to monitor production and purification progress.

Enzymatic generation of ceramide induces membrane restructuring: Correlated AFM and fluorescence imaging of supported bilayers.

The effect of enzymatic generation of ceramide on phase separated bilayers with a mixture of co-existing fluid and liquid-ordered phases has been examined using a combination of atomic force microscopy (AFM) and fluorescence imaging. Supported lipid bilayers prepared from a DOPC/sphingomyelin/cholesterol mixture were imaged prior to, during and after incubation with sphingomyelinase by total internal reflection fluorescence (TIRF) microscopy. Enzyme treatment resulted in the growth of large dye-excluded regions. The growth kinetics for these patches are consistent with activity of a variable number of enzyme molecules in different regions of the bilayer. Correlated AFM and fluorescence imaging shows that some of the large dye-excluded patches form around the original liquid-ordered domains, which become heterogeneous in height with many raised ceramide-rich regions around their periphery. However, some of the dye-excluded patches correspond to areas of the bilayer where the initial domains have largely or partially disappeared. The dye-excluded patches observed by fluorescence are shown to be areas of increased adhesion in lateral deflection AFM images and are postulated to form by incorporation of both cholesterol and ceramide in the original fluid phase and to vary in composition throughout the bilayer. This is evident from the observation that the dye-excluded areas are all detected as areas of increased friction, but do not always show a distinct height difference in topographic images. These results highlight the utility of a multi-modal imaging approach for understanding the complex membrane restructuring that occurs upon enzymatic generation of ceramide.

Assessing size-dependent cytotoxicity of boron nitride nanotubes using a novel cardiomyocyte AFM assay.

As boron nitride nanotubes (BNNTs) find increased use in numerous applications, potential adverse health effects of BNNT exposure are a growing concern. Current in vitro cytotoxicity studies on BNNTs are inconsistent and even contradictory, likely due to the lack of reference materials, standardized characterization methods and measurement protocols. New approaches, particularly with the potential to reliably relate in vitro to in vivo studies, are critically needed. This work introduces a novel atomic force microscopy (AFM)-based cardiomyocyte assay that reliably assesses the cytotoxicity of a well-characterized boron nitride nanotube reference material, code named BNNT-1. High energy probe sonication was used to modify and control the length of BNNT-1. The polymer polyethylenimine (PEI) was used concurrently with sonication to produce stable, aqueous dispersions of BNNT-1. These dispersions were used to perform a systematic analysis on both the length and height of BNNT-1 via a correlated characterization approach of dynamic light scattering (DLS) and AFM. Cytotoxicity studies using the novel cardiomyocyte AFM model were in agreement with traditional colorimetric cell metabolic assays, both revealing a correlation between tube length and cytotoxicity with longer tubes having higher cytotoxicity. In addition to the size-dependent cytotoxicity, it was found that BNNT-1 exhibits concentration and cell-line dependent cytotoxic effects.

Studies of the interaction of the viral suppressor of RNA silencing protein p19 with small RNAs using fluorescence polarization.

Tombusviruses use a 19 kDa protein (p19) as a suppressor of the RNA silencing pathway during infection. The p19 protein binds to short-interfering RNA (siRNA) as a dimer and shows a high selectivity for short duplex RNAs over other RNA species. Since p19 can bind to synthetic and RNA silencing generated small RNAs with little sequence dependence and with size selectivity, this protein has utility as a tool for studying RNA silencing pathways in eukaryotes. However, the ability of p19 to serve as a tool for studying RNA silencing pathways may be complicated by the presence of other endogenous small RNAs such as micro-RNAs (miRNAs). To understand the importance of endogenous small RNA components with respect to p19's ability to bind to siRNAs, we examined the interactions of p19 with human miR-122, a 23-nucleotide duplex miRNA containing several mismatched base pairs that is highly abundant in the liver. The binding characteristics were compared with those of an siRNA optimized against the human kinase CSK. The binding studies were performed using fluorescence polarization experiments on duplex oligonucleotides containing Cy3 dye labels at the 5'-end of one of the strands of RNA as well as electrophoretic gel mobility shift assays. Both methods indicate that the synthetic siRNA with no mismatches in base pairing bound with >3-fold selectivity over that of miR-122. Our results suggest that p19 can distinguish between siRNAs and miRNA species, although the difference in binding constants is not so large that interactions with endogenous miRNAs can be totally ignored.

Manipulation and Quantification of Graphene Oxide Flake Size: Photoluminescence and Cytotoxicity.

Single-layered graphene oxide (GO) has exhibited great promise in the areas of sensing, membrane filtration, supercapacitors, bioimaging, and therapeutic carriers because of its biocompatibility, large surface area, and electrochemical, photoluminescent, and optical properties. To elucidate how the physical dimensions of GO affect its intrinsic properties, we employed sonication to produce more than 130 different sizes of GO in aqueous dispersion and implemented new approaches to characterize various GO properties as a function of the average flake size. New protocols were developed to determine and compare the flake size of GO dispersions sonicated with energies up to 20 MJ/g by using dynamic light scattering and atomic force microscopy (AFM). The relationship between the average flake size and sonication energy per unit mass of GO was observed to follow a power law. AFM height measurements showed that the sonication of GO yielded monolayered flakes. Photoluminescence of GO was characterized as a function of the sonication energy (or the average flake size which is the monotonic function of the sonication energy), excitation wavelength, and pH of the dispersion. The strong dependence of the photoluminescence intensity on pH control and the variation of the photoluminescence intensity with different flake sizes were observed. An intense photoluminescence signal, likely related to the separation of the oxidative debris from the GO framework, was found at the highest sonication energies (E ≳ 15 MJ/g) or under extremely alkaline conditions (pH ≳ 11). The cytotoxicity of GO was studied with various flake sizes. Size- and concentration-dependent cytotoxicity was observed for cell lines NIH 3T3 and A549. The NIH 3T3 cell line also demonstrated time-dependent cytotoxicity.

Laser-assisted synthesis of superparamagnetic Fe@Au core-shell nanoparticles.

A novel method combining wet chemistry for synthesis of an Fe core, 532 nm laser irradiation of Fe nanoparticles and Au powder in liquid medium for deposition of an Au shell, and sequential magnetic extraction/acid washing for purification has been developed to fabricate oxidation-resistant Fe@Au magnetic core-shell nanoparticles. The nanoparticles have been extensively characterized at various stages during and up to several months after completion of the synthesis by a suite of electron microscopy techniques (HRTEM, HAADF STEM, EDX), X-ray diffraction (XRD), UV-vis spectroscopy, inductively coupled plasma atomic emission spectroscopy, and magnetometry. The surface plasmon resonance of the Fe@Au nanoparticles is red shifted and much broadened as compared with that of pure colloidal nano-gold, which is explained to be predominantly a shell-thickness effect. The Au shell consists of partially fused approximately 3-nm-diameter fcc Au nanoparticles (lattice interplanar distance, d = 2.36 A). The 18-nm-diameter magnetic core is bcc Fe single domain (d = 2.03 A). The nanoparticles are superparamagnetic at room temperature (300 K) with a blocking temperature, T(b), of approximately 170 K. After 4 months of shelf storage in normal laboratory conditions, their mass magnetization per Fe content was measured to be 210 emu/g, approximately 96% of the Fe bulk value.