RESUMEN
RATIONALE: Stable carbon and oxygen isotope data of biogenic and abiogenic aragonite are of fundamental relevance in paleoclimate research. Wet-chemical analysis of such materials requires well-homogenized, fine-grained powder. In the present study, the effect of different grinding/milling methods on sample homogeneity and the potential risk of unintentional calcite formation and isotope shift were evaluated. METHODS: Shells of Arctica islandica and aragonite sputnik crystals were pulverized using a set of commonly used methods, including a hand-held drill, a vibromill operated at various settings (with and without liquid nitrogen cooling, changes in ball diameters, frequencies, and processing durations), and an agate mortar and pestle. Stable isotope values were measured using an isotope ratio mass spectrometer operated in continuous flow mode. Identification of mineral phases was obtained by powder X-ray diffraction (PXRD), Raman spectroscopy, and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. Calcite content was quantified by PXRD Rietveld refinement. RESULTS: Samples showed substantial homogeneity, in particular after vibromilling (duration 3-10 min). More vigorous grinding resulted in larger fractions of calcite (0.5-4.2 wt%) and a concomitant δ18O and δ13C decrease, specifically in bivalve shells. The only method for producing pure aragonite powder was by pounding the aragonite sputniks manually with an agate mortar and pestle. CONCLUSIONS: None of the studied, commonly used machine-based pulverization methods produced pure aragonite powder from samples consisting originally of aragonite. These findings have significant implications for light-stable isotope-based paleoclimate reconstructions. Except for abiogenic aragonite powder produced by pounding in an agate mortar, paleotemperatures would be overestimated.
RESUMEN
Highly reflective crystals of the nucleotide base guanine are widely distributed in animal coloration and visual systems. Organisms precisely control the morphology and organization of the crystals to optimize different optical effects, but little is known about how this is achieved. Here we examine a fundamental question that has remained unanswered after over 100 years of research on guanine: what are the crystals made of? Using solution-state and solid-state chemical techniques coupled with structural analysis by powder XRD and solid-state NMR, we compare the purine compositions and the structures of seven biogenic guanine crystals with different crystal morphologies, testing the hypothesis that intracrystalline dopants influence the crystal shape. We find that biogenic "guanine" crystals are not pure crystals but molecular alloys (aka solid solutions and mixed crystals) of guanine, hypoxanthine, and sometimes xanthine. Guanine host crystals occlude homogeneous mixtures of other purines, sometimes in remarkably large amounts (up to 20% of hypoxanthine), without significantly altering the crystal structure of the guanine host. We find no correlation between the biogenic crystal morphology and dopant content and conclude that dopants do not dictate the crystal morphology of the guanine host. The ability of guanine crystals to host other molecules enables animals to build physiologically "cheaper" crystals from mixtures of metabolically available purines, without impeding optical functionality. The exceptional levels of doping in biogenic guanine offer inspiration for the design of mixed molecular crystals that incorporate multiple functionalities in a single material.
Asunto(s)
Guanina , Purinas , Animales , Guanina/metabolismo , Hipoxantina/metabolismo , Purinas/química , Xantina/metabolismoRESUMEN
Guanine crystals are used by certain animals, including vertebrates, to produce structural colors or to enhance vision, because of their distinctive reflective properties. Here we use cryo-SEM, cryo- FIB SEM and Raman spectroscopic imaging to characterize crystalline inclusions in a single celled photosynthesizing marine dinoflagellate species. We demonstrate spectroscopically that these inclusions are blocky crystals of anhydrous guanine in the ß-polymorph. Two-dimensional cryo-SEM and three-dimensional cryo-FIB-SEM serial block face imaging show that the deposits of anhydrous guanine crystals are closely associated with the chloroplasts. We suggest that the crystalline deposits scatter light either to enhance light exploitation by the chloroplasts, or possibly for protection from UV radiation. This is consistent with the crystal locations within the cell, their shapes and their sizes. As the dinoflagellates are extremely abundant in the oceans and are a major group of photosynthesizing marine organisms, the presence of guanine crystals in this marine organism may have broad significance.
Asunto(s)
Dinoflagelados/química , Guanina/química , Organismos Acuáticos , Cloroplastos/efectos de la radiación , Microscopía por Crioelectrón , Cristalización , Guanina/fisiología , Microscopía Electrónica de Rastreo , Estructura Molecular , Espectrometría RamanRESUMEN
Diatom biosilica is an inorganic/organic hybrid with interesting properties. The molecular architecture of the organic material at the atomic and nanometer scale has so far remained unknown, in particular for intact biosilica. A DNP-supported ssNMR approach assisted by microscopy, MS, and MD simulations was applied to study the structural organization of intact biosilica. For the first time, the secondary structure elements of tightly biosilica-associated native proteins in diatom biosilica were characterized inâ situ. Our data suggest that these proteins are rich in a limited set of amino acids and adopt a mixture of random-coil and ß-strand conformations. Furthermore, biosilica-associated long-chain polyamines and carbohydrates were characterized, thereby leading to a model for the supramolecular organization of intact biosilica.
Asunto(s)
Diatomeas/química , Espectroscopía de Resonancia Magnética , Dióxido de Silicio/química , Sustancias Macromoleculares/química , Simulación de Dinámica Molecular , Tamaño de la Partícula , Estándares de Referencia , Propiedades de SuperficieRESUMEN
Cellulose nanofibres (CNFs), also known as nano-fibrillated cellulose, have emerged as highly promising sustainable biomaterials owing to their numerous advantages, including high accessibility, long-term sustainability, low toxicity, and mechanical properties. Recently, marine organisms have been explored as novel and environmentally friendly sources of cellulose fibers (CFs) due to their easy cultivation, extraction and biocompatibility. Dinoflagellates, a group of marine phytoplankton, have gained particular attention due to their unique cellulosic morphology and lignin-free biomass. Previously, we showed that the unique amorphous nature of dinoflagellate-derived cellulose offers various benefits. This study further explores the potential of dinoflagellate-derived CFs as a sustainable and versatile CNF source. Extracted dinoflagellate cellulose is effectively converted into CNFs via one-step TEMPO oxidation without significant polymer degradation. In addition, the biological compatibility of the CNFs is improved by amine-grafting using putrescine and folic acid. The products are characterised by conductometric titration, zeta potential measurements, TGA, GPC, FTIR, SEM/TEM, XRD, and XPS. Finally, in a proof-of-principle study, the application of the functionalised CNFs in drug delivery is tested using methylene blue as a drug model. Our findings suggest that dinoflagellate-derived CNFs provide an eco-friendly platform that can be easily functionalised for various applications, including drug delivery.
Asunto(s)
Celulosa , Dinoflagelados , Nanofibras , Dinoflagelados/química , Celulosa/química , Nanofibras/química , Óxidos N-Cíclicos/química , Ácido Fólico/químicaRESUMEN
The global demand for manufacturing and consuming biodegradable materials from natural sources has created a great interest in microalgae such as dinoflagellates. Photosynthetic dinoflagellates are a sustainable source of natural materials such as cellulose as they grow using only sunlight and CO2 at near-neutral pH without any fertilizers. In this paper, the cultivation of two species of dinoflagellates (Peridinium sp. and Prorocentrum micans) is established under lab conditions (up to 20 l), cellulose extraction is optimized, and the resulting material is thoroughly characterized. Dinoflagellate cellulose was extracted at room temperature by sequential treatment with highly concentrated 30 % NaOH and 6 M HCl, followed by bleaching with 10 % H2O2. The overall yield of cellulose is around 73 % (w/w), and roughly 85 % of the original dinoflagellate cellulosic morphology remains intact. Chemical purity, morphology, and porosity of the dinoflagellate-derived cellulose are analysed by different characterization techniques (ICP-OES, SEM, XRD, ATR-FTIR, Raman, ssNMR, TGA, BET, and GPC). XRD characterization of the extracted cellulose shows no characteristic reflexes corresponding to a cellulose II allomorph which is mainly amorphous. This result is further supported by ATR-FTIR, Raman, and ssNMR spectroscopy. Overall, these results show that the extracted cellulose is a highly porous, lignin-free material that is thermally stable up to 260 °C. Its high degree of purity and porosity make dinoflagellate-derived cellulose a promising, sustainable candidate for the development of functional hybrid materials for biomedical applications.
Asunto(s)
Celulosa , Dinoflagelados , Celulosa/química , Peróxido de Hidrógeno , Lignina/química , Concentración de Iones de HidrógenoRESUMEN
Functional capacities of lead halide perovskites are strongly dependent on their morphology, crystallographic texture, and internal ultrastructure on the nano- and the meso-scale. In the last decade, significant efforts are directed towards the development of novel synthesis routes that would overcome the morphological constraints provided by the physical and crystallographic properties of these materials. In contrast, various living organisms, such as unicellular algae, have the ability to mold biogenic crystals into a vast variety of intricate nano-architectured shapes while keeping their single crystalline nature. Here, using the cell wall of the dinoflagellate L. granifera as a model, sustainably harvested biogenic calcite is successfully transformed into nano-structured perovskites. Three variants of lead halide perovskites CH3 NH3 PbX3 are generated with X = Cl- , Br- and I- ; exhibiting emission peak-wavelength ranging from blue, to green, to near-infrared, respectively. The approach can be used for the mass production of nano-architectured perovskites with desired morphological, textural and, consequently, physical properties exploiting the numerous templates provided by calcite forming unicellular organisms.
RESUMEN
Buds of horse-chestnut trees are covered with a viscous fluid, which remains sticky after long-term exposure to heat, frost, radiation, precipitation, deposition of aerosols and particles, attacks by microbes and arthropods. The present study demonstrates that the secretion does not dry out under arid conditions, not melt at 50 °C, and not change significantly under UV radiation or frost at a microscopic level. It is slightly swellable under wet conditions; and, it universally wets and adheres to substrates having different polarities. Measured pull-off forces do not differ between hydrophilic and lipophilic surfaces, ranging between 58 and 186 mN, and resulting in an adhesive strength up to 204 kPa. The mechanical and chemical properties of secretion resemble those of pressure-sensitive adhesives. The Raman, infrared, and nuclear magnetic resonance spectra show the clear presence of saturated aliphatic hydrocarbons, esters, free carboxylic acids, as well as minor amounts of amides and aromatic compounds. We suggest a multi-component material (aliphatic hydrocarbon resin), including alkanes, fatty acids, amides, and tackifying terpenoids embedded in a fluid matrix (fatty acids) comprising nonpolar and polar portions serving the universal and robust adhesive properties. These characteristics matter for ecological-evolutionary aspects and can inspire innovative designs of multifunctional, biomimetic pressure-sensitive adhesives and varnishes.
Asunto(s)
Aesculus/metabolismo , Aesculus/fisiología , Microscopía por Crioelectrón , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de Rastreo , Hojas de la Planta/metabolismo , Análisis Espectral/métodos , Temperatura , ViscosidadRESUMEN
Little is known about shell formation of calcareous dinoflagellates, despite the fact that they are one of the major calcifying organisms of the phytoplankton. Here, calcitic cyst formation in two representative members of calcareous dinoflagellates is investigated using cryo-electron microscopy (cryo-SEM and cryo-FIB-SEM) in combination with micro-Raman and infrared spectroscopy. Only calcein-AM and not calcein enters these cells, indicating active uptake of calcium and other divalent cations. Multifunctional vacuoles containing crystalline inclusions are observed, and the crystals are identified as anhydrous guanine in the ß-form. The same vacuolar enclosures contain dense magnesium-, calcium-, and phosphorous-rich mineral bodies. These bodies are presumably secreted into the outer matrix where calcite forms. Calcite formation occurs via multiple independent nucleation events, and the different crystals grow with preferred orientation into a dense reticular network that forms the mature calcitic shell. We suggest a biomineralization pathway for calcareous dinoflagellates that includes (1) active uptake of calcium through the membranes, (2) deposition of Mg2+- and Ca2+-ions inside disordered MgCaP-rich mineral bodies, (3) secretion of these bodies to the inter-membrane space, and (4) Formation and growth of calcite into a dense reticulate network. This study provides new insights into calcium uptake, storage and transport in calcifying dinoflagellates. STATEMENT OF SIGNIFICANCE: Little is known about the shell formation of calcareous dinoflagellates, despite the fact that they are one of the major calcifying organisms of the phytoplankton. We used state-of-the-art cryo-electron microscopy (cryo-SEM and cryo-FIB-SEM) in combination with micro-Raman spectroscopy to provide new insights into mineral formation in calcifying dinoflagellates. To date, intracellular crystalline calcite was assumed to be involved in calcite shell formation. Surprisingly, we identify these crystalline inclusions as anhydrous guanine suggesting that they are not involved in biomineralization. Instead, a key finding is that MgCaP-rich bodies are probably secreted into the outer matrix where the calcite shell is formed. We suggest that these bodies are an essential part of Ca-uptake, -storage and -transport and propose a new biomineralization model.
Asunto(s)
Calcificación Fisiológica/fisiología , Calcio/metabolismo , Dinoflagelados/fisiología , Magnesio/metabolismo , Carbonato de Calcio/metabolismo , Polifosfatos/metabolismo , Vacuolas/metabolismoRESUMEN
The discovery of long-chain polyamines as biomolecules that are tightly associated to biosilica in diatom cell walls has inspired numerous in vitro studies aiming to characterize polyamine-silica interactions. The determination of these interactions at the molecular level is of fundamental interest on one hand for the understanding of cell wall biogenesis in diatoms and on the other hand for designing bioinspired materials synthesis approaches. The present contribution deals with the influence of amines and polyamines upon the initial self-assembly processes taking place during polyamine-mediated silica formation in solution. The influence of phosphate upon these processes is studied. For this purpose, sodium metasilicate solutions containing additives such as polyallylamine, allylamine and others in the presence/absence of phosphate were investigated. The analyses are based mainly on turbidity measurements yielding information about the early aggregation steps which finally give rise to the formation and precipitation of silica.
RESUMEN
Diatom-templated noble metal (Ag, Pt, Au) and semiconductor (CdTe) nanoparticle arrays were synthesized by the attachment of prefabricated nanoparticles of defined size. Two different attachment techniques-layer-by-layer deposition and covalent linking-could successfully be applied. The synthesized arrays were shown to be useful for surface-enhanced Raman spectroscopy (SERS) of components, for catalysis, and for improved image quality in scanning electron microscopy (SEM).