Ultrasensitive SERS Analysis of Liquid and Gaseous Putrescine and Cadaverine by a 3D-Rosettelike Nanostructure-Decorated Flexible Porous Substrate.

Putrescine and cadaverine are toxic biogenic amines in spoiled food, which poses a serious threat to food security. In this work, we reported a highly sensitive three-dimensional (3D)-rosettelike surface-enhanced Raman spectroscopy (SERS) substrate functionalized with a p-mercaptobenzoic acid (p-MBA) monolayer to detect liquid and gaseous putrescine and cadaverine in pork samples. The SERS substrate was made by a combination of the merit of the 3D morphology of ZnO nanorod arrays on a flexible porous poly(vinylidene fluoride) (PVDF) membrane and the in situ chemical growth of Au nanoparticle seeds on Au film-coated ZnO nanorods, which produced a 3D-rosettelike BigAuNP/Au/ZnO/P heterostructure with abundant SERS-active hot spots that significantly enhanced the localized surface plasmonic resonance (LSPR) effect and charge-transfer (CT) effect of Raman enhancement. This SERS substrate showed high sensitivity, reproducibility, stability, and uniformity. With the p-MBA molecular monolayer as the sensing interface, our SERS substrate realized the highly sensitive and quantitative detection of liquid putrescine and cadaverine within 10 min, with a limit of detection (LOD) of 3.2 × 10-16 and 1.6 × 10-13 M, respectively. Additionally, the sensor showed efficient SERS responses to gaseous amine molecules at low concentrations (putrescine: 1.26 × 10-9 M, cadaverine: 2.5 × 10-9 M). Further, the sensor was successfully applied to determine the total content of putrescine and cadaverine. Moreover, the practicability of this SERS sensor was verified by the measurement of liquid and gaseous amines in pork samples, and it showed great potential applications for sensitive detection of food spoilage.

Particles 3D tracking with large axial depth by using the 2π-DH-PSF.

We propose a 2π-double-helix point spread function (2π-DH-PSF) using the Fresnel zone approach that can rotate 2π rad. When 16 Fresnel zones are used, the particles can be tracked in the axial range of 10 µm in a 100× microscopy imaging system (NA=1.4, λ=514nm). We measured the diffusion coefficient of nanospheres in different concentrations of glycerol with the 2π-DH-PSF, and the error between the measured results and theoretical value was within 10%, indicating the superior performance of 2π-DH-PSF in 3D localization imaging of nanoparticles. When combined with the defocus phase, the rotation angle can reach 4π rad, four times that of the conventional DH-PSF.

Continuous in situ portable SERS analysis of pollutants in water and air by a highly sensitive gold nanoparticle-decorated PVDF substrate.

The increasingly serious environmental pollution worldwide has posed a great threat to the ecosystem and human health, and yet the development of portable in situ monitoring techniques that are sensitive to gaseous and water pollutants remains incomplete. Herein, we report a highly active surface-enhanced Raman spectroscopy (SERS) substrate fabricated by immobilizing gold nanoparticles (AuNPs) onto a polyvinylidene fluoride (PVDF) membrane for continuous in situ SERS detection of pollutants in water and atmosphere. 4-Mercaptobenzoic acid (4-MBA) was adopted as a probe molecule to evaluate the performance of the substrate, and the results indicate that the polymer-based flexible substrate features high sensitivity, uniformity, and repeatability. The fabricated PVDF/SERS substrate was integrated with a portable Raman spectrometer operating under both passing-by and passing-through modes. The integrated system accomplishes quantitative detection and real-time online monitoring of pH in a liquid environment with a response speed of less than 10 s and the rapid SERS response to gas molecules at a low concentration within 30 s. We also demonstrated the highly sensitive detection for mainstream smoke (MS) and sidestream (SS) of cigarette smoke and verified their differences in the main constituent which contributes to the harmful secondhand smoke in public. The developed portable Raman system has excellent application prospects in online liquid and gas environmental detection.

Low Cost, Easily-Assembled Centrifugal Buoyancy-Based Emulsification and Digital PCR.

Microfluidic-based droplet generation approaches require the design of microfluidic chips and a precise lithography process, which require skilled technicians and a long manufacturing time. Here we developed a centrifugal buoyancy-based emulsification (CBbE) method for producing droplets with high efficiency and minimal fabrication time. Our approach is to fabricate a droplet generation module that can be easily assembled using syringe needles and PCR tubes. With this module and a common centrifuge, high-throughput droplet generation with controllable droplet size could be realized in a few minutes. Experiments showed that the droplet diameter depended mainly on centrifugal speed, and droplets with controllable diameter from 206 to 158 µm could be generated under a centrifugal acceleration range from 14 to 171.9 g. Excellent droplet uniformity was achieved (CV < 3%) when centrifugal acceleration was greater than 108 g. We performed digital PCR tests through the CBbE approach and demonstrated that this cost-effective method not only eliminates the usage of complex microfluidic devices and control systems but also greatly suppresses the loss of materials and cross-contamination. CBbE-enabled droplet generation combines both easiness and robustness, and breaks the technical challenges by using conventional lab equipment and supplies.

One-Step Generation and Purification of Cell-Encapsulated Hydrogel Microsphere With an Easily Assembled Microfluidic Device.

Cell-laden hydrogel microspheres with uniform size show great potential for tissue repair and drug screening applications. Droplet microfluidic systems have been widely used for the generation of cell-laden hydrogel microspheres. However, existing droplet microfluidic systems are mostly based on complex chips and are not compatible with well culture plates. Moreover, microspheres produced by droplet microfluidics need demulsification and purification from oil, which requires time and effort and may compromise cell viability. Herein, we present a simple one-step approach for producing and purifying hydrogel microspheres with an easily assembled microfluidic device. Droplets were generated and solidified in the device tubing. The obtained hydrogel microspheres were then transferred to a tissue culture plate filled with cell culture media and demulsified through evaporation of the oil at 37°C. The removal of oil caused the gelled microspheres to be released into the cell culture media. The encapsulated cells demonstrated good viability and grew into tumor spheroids in 12-14 days. Single cell-laden hydrogel microspheres were also obtained and grown into spheroid in 14 days. This one-step microsphere generation method shows good potential for applications in automated spheroid and organoid cultures as well as drug screening, and could potentially offer benefits for translation of cell/microgel technologies.

Bioassay-guided isolation and evaluation of anti-osteoporotic polysaccharides from Morinda officinalis.

ETHNOPHARMACOLOGICAL RELEVANCE: Morinda officinalis is a well-known Chinese tonic herb that has shown clinical efficacy in the treatment of bone disease. However, its anti-osteoporotic potential and the M. officinalis polysaccharides (MOPs) responsible for activity require further investigation. AIM OF THE STUDY: This study aimed to investigate the anti-osteoporotic effects of different MOP fractions in ovariectomized (OVX) rats, and to identify the osteoprotective components by bioassay-guided isolation. MATERIALS AND METHODS: MOPs were prepared by hot water and alkali extraction, separated into three fractions (MO50, MO70, and MOB) and evaluated in the classic OVX rat model and in MC3T3-E1 cells for anti-osteoporotic activity. RESULTS: Administration of MOPs (400 mg/kg/day) provided significant protection against ovariectomy-induced bone loss and biomechanical dysfunction in rats. Treated animals exhibited reduced deterioration of trabecular microarchitecture and lower levels of bone turnover markers. Bioactivity-guided fractionation led to the isolation of two inulin-type fructans from MO50, MOW50-1 and MOP50-2, with potential anti-osteoporotic activities. These consisted of (2 → 1)-linked ß-D-fructosyl residues with degrees of polymerization (DP) of 7 and 13, respectively. Furthermore, MOW50-1 promoted osteogenic differentiation of MC3T3-E1 cells by increasing alkaline phosphatase activity. CONCLUSIONS: These data suggest very strongly that MOPs, especially MO50 and MOW50-1, may play important roles in the prevention and treatment of osteoporosis.

Identification and characterization of a polysaccharide from the roots of Morinda officinalis, as an inducer of bone formation by up-regulation of target gene expression.

Morinda officinalis is an important traditional tonic herbal medicine. In the present study, we found that crude polysaccharides extracted from M. officinalis, named MO90, could significantly increase the bone mineral density (BMD) of the whole femur, distal femur, and proximal femur in ovariectomized (OVX) rats. In addition, MO90 decreased the level of bone turnover markers and prevented the deterioration of trabecular microarchitecture. To investigate the fractions responsible for anti-osteoporosis activity, one novel inulin-type fructan, MOW90-1, was isolated from MOP90. Structural analysis indicated that MOW90-1 consists of a backbone of (2→1)-linked-ß-D-Fruf, and is terminated with (1→)-linked-α-D-Glcp and (2→)-linked-ß-D-Fruf. Furthermore, an in vitro anti-osteoporosis assay indicated that MOW90-1 promoted proliferation, differentiation, and mineralization of MC3T3-E1 cells by up-regulating the expression of runt-related transcription factor 2, osterix, osteopontin, and osteocalcin. In conclusion, our studies provide supporting evidence for future use of this novel M. officinalis fructan as a key nutrient of health products.

Ultrasensitive Detection of Pb2+ Based on a DNAzyme and Digital PCR.

In this study, an ultrasensitive detection method for aqueous Pb2+ based on digital polymerase chain reaction (dPCR) technology and a Pb2+-dependent DNAzyme was developed. In the presence of Pb2+, the Gr-5 DNAzyme was activated and catalyzed the hydrolytic cleavage of the substrate strand, resulting in an increase in the amount of template DNA available for dPCR and a resultant change in the number of droplets showing a positive signal. Moreover, the detection system was found to be sensitive and stable in environmental sample detection. In summary, an ultrasensitive quantitative detection method for Pb2+ within environmental substrates was established.

An automated approach to classification of duplex assay for digital droplet PCR.

In the digital polymerase chain reaction (dPCR) detection process, discriminating positive droplets from negative ones directly affects the final concentration and is one of the most important factors affecting accuracy. Current automated classification methods usually discuss single-channel detections, whereas duplex detection experiments are less discussed. In this paper, we designed a classification method by estimating the upper limit of the negative droplets. The right tail of the negative droplets is approximated using a generalized Pareto distribution. Furthermore, our method takes fluorescence compensation in duplex assays into account. We also demonstrate the method on Bio-Rad's mutant detection dataset. Experimental results show that the method provides similar or better accuracy than other algorithms reported over a wider dynamic range.

Investigation of inulins from the roots of Morinda officinalis for potential therapeutic application as anti-osteoporosis agent.

SCOPE: In China, the root of M. officinalis has been widely used over thousands of years against a wide range of bone disease such as lumbago, limb-ache, sciatica and rheumatic arthralgia, and has tremendous medicinal value. But the bioactive constituents responsible for the osteoprotective effects in M. officinalis remain unknown. METHODS AND RESULTS: M. officinalis polysaccharides were extracted, isolated and purified via DEAE-cellulose 52 and Sephacryl S-100HR column to obtain two saccharides (MOP70-1 and MOP70-2). The results of osteogenic activity assays revealed that MOP70-1 and MOP70-2 significantly promoted the proliferation, differentiation and mineralization of MC3T3-E1 cells. Furthermore, MOP70-2 also upregulated gene expression of runt-related transcription factor 2, osterix, osteocalcin, osteopontin, bone sialoprotein and osteoprotegerin, which implied that MOP70-2 stimulated osteoblastic differentiation by up-regulating osteogenic differentiation-related marker genes. In addition, structural analysis indicated that MOP70-2 contained (2 → 1)-linked-ß-D-Fruf residues and terminated with a glucose residue. Morphological and conformational analyses indicated that MOP70-2 exhibited spherical structure of conglomeration and had no triple helix structure. CONCLUSION: Our studies reported the osteogenic inulins obtained from root of M. officinalis for the first time. The systematical investigation including extraction, purification, biological activities and structural characterization provide a strong evidence for future therapeutic applications as anti-osteoporosis agent.

Color-switchable, emission-enhanced fluorescence realized by engineering C-dot@C-dot nanoparticles.

This paper reports the preparation and properties of color-switchable fluorescent carbon nanodots (C-dots). C-dots that emit dark turquoise and green-yellow fluorescence under 365 nm UV illumination were obtained from the hydrothermal decomposition of citric acid. Dark green fluorescent C-dots were obtained by conjugating prepared C-dots to form C-dot@C-dot nanoparticles. After successful conjugation of the C-dots, the fluorescence emission undergoes a blue-shift of nearly 20 nm (∼0.15 eV) under UV excitation at 370 nm. The C-dots emit goldenrod, green-yellow, and gold light under excitation at 455 nm, which shows that the prepared C-dots are color-switchable. Furthermore, conjugation of the C-dots results in enhanced, red-shifted absorption of the π-π* transition of the aromatic sp(2) domains due to the conjugated π-electron system. N incorporation in the carbon structure leads to a degree of dipoles for all the aromatic sp(2) bonds. The enhanced absorption in a wide range from 226 to 601 nm indicates extended conjugation in the C-dot@C-dot structure. The time-resolved average lifetimes for the three different types of C-dots prepared in this study are 7.10, 7.65, and 4.07 ns. The radiative rate (reduced decay lifetime) increases when the C-dots are conjugated in the C-dot@C-dot nanoparticles, leading to the enhanced fluorescence emission. The fluorescence emission of the C-dot@C-dot nanoparticles can be used in applications such as flow cytometry and cell imaging.