Simultaneous nitrification-denitrification using baffled osmotic membrane bioreactor-microfiltration hybrid system at different oxic-anoxic conditions for wastewater treatment.

The efficacy of a baffled osmotic membrane bioreactor-microfiltration (OMBR-MF) hybrid system equipped with thin film forward osmosis membrane for wastewater treatment was evaluated at laboratory scale. The novel OMBR-MF hybrid system involved baffles, that separate oxic and anoxic zones in the aerobic reactor for simultaneous nitrification and denitrification (SND), and a bioreactor comprised of thin film composite-forward osmosis (TFC-FO) and polyether sulfone-microfiltration (PES-MF) membranes. The evaluation was conducted under four different oxic-anoxic cycle patterns. Changes in flux, salinity build-up, and microbial activity (e.g., extracellular polymeric substances (EPS) were assessed. Over the course of a 34 d test, the OMBR-MF hybrid system achieved high removal of total organic carbon (TOC) (86-92%), total nitrogen (TN) (63-76%), and PO4-P (57-63%). The oxic-anoxic cycle time of 0.5-1.5 h was identified to be the best operating condition. Incorporation of MF membrane effectively alleviated salinity build-up in the reactor, allowing stable system operation.

Phosphate adsorption from wastewater using zirconium (IV) hydroxide: Kinetics, thermodynamics and membrane filtration adsorption hybrid system studies.

Excessive phosphate in wastewater should be removed to control eutrophication of water bodies. The potential of employing amorphous zirconium (Zr) hydroxide to remove phosphate from synthetic wastewater was studied in batch adsorption experiments and in a submerged membrane filtration adsorption hybrid (MFAH) reactor. The adsorption data satisfactorily fitted to Langmuir, pseudo-first order and pseudo-second order models. Langmuir adsorption maxima at 22 °C and pHs of 4.0, 7.1, and 10.0 were 30.40, 18.50, and 19.60 mg P/g, respectively. At pH 7.1 and temperatures of 40 °C and 60 °C, they were 43.80 and 54.60 mg P/g, respectively. The thermodynamic parameters, ΔG° and ΔS° were negative and ΔH° was positive. FTIR, zeta potential and competitive phosphate, sulphate and nitrate adsorption data showed that the mechanism of phosphate adsorption was inner-sphere complexation. In the submerged MFAH reactor experiment, when Zr hydroxide was added at doses of 1-5 g/L once only at the start of the experiment, the removal of phosphate from 3 L of wastewater containing 10 mg P/L declined after 5 h of operation. However, when Zr hydroxide was repeatedly added at 5 g/L dose every 24 h, satisfactory removal of phosphate was maintained for 3 days.

Microplastic particles in the aquatic environment: A systematic review.

Microplastics (MPs) pollution has become one of the most severe environmental concerns today. MPs persist in the environment and cause adverse effects in organisms. This review aims to present a state-of-the-art overview of MPs in the aquatic environment. Personal care products, synthetic clothing, air-blasting facilities and drilling fluids from gas-oil industries, raw plastic powders from plastic manufacturing industries, waste plastic products and wastewater treatment plants act as the major sources of MPs. For MPs analysis, pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), Py-MS methods, Raman spectroscopy, and FT-IR spectroscopy are regarded as the most promising methods for MPs identification and quantification. Due to the large surface area to volume ratio, crystallinity, hydrophobicity and functional groups, MPs can interact with various contaminants such as heavy metals, antibiotics and persistent organic contaminants. Among different physical and biological treatment technologies, the MPs removal performance decreases as membrane bioreactor (> 99%) > activated sludge process (~98%) > rapid sand filtration (~97.1%) > dissolved air floatation (~95%) > electrocoagulation (> 90%) > constructed wetlands (88%). Chemical treatment methods such as coagulation, magnetic separations, Fenton, photo-Fenton and photocatalytic degradation also show moderate to high efficiency of MP removal. Hybrid treatment technologies show the highest removal efficacies of MPs. Finally, future research directions for MPs are elaborated.

Hybrid filtration method for pre-treatment of stormwater.

In this study the hybrid filtration process (combining fibre filter with deep bed dual media filtration) was investigated as pre-treatment to stormwater. This process was investigated in-terms of reduction in turbidity, dissolved organic carbon (DOC), colour, headloss development across the filters, suspended solids removal, organic matter removal, nutrients and heavy matter (such as iron, copper, lead, zinc) removal efficiency. A comparison was made between the hybrid filter with single media (sand) deep bed filter and fibre filter. It was found that the hybrid filtration system successfully removed turbidity (98%), colour (99%), suspended solids (99%), and DOC (55%). The removal efficiency of heavy metal was relatively low as the concentration of heavy metals present in stormwater was low. The removal efficiency of nitrate, nitrite and phosphorous (as orthophosphate) was 27, 35 and 72% respectively. Hybrid filtration processes showed a better reduction of Modified Fouling Index (MFI) value (from 15.500 s/l(2) to 9 s/l(2)) compared with single media sand, anthracite and fibre filter which were 35 s/l(2), 13 s/l(2)and 14 s/l(2) respectively when operated at FeCl(3) dose of 15 mg/l.

Per- and polyfluoroalkyl substances in soil and sediments: Occurrence, fate, remediation and future outlook.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are contaminants of great concern due to their wide-spread occurrence and persistence in the environments (i.e., in water, soil and sediment) and potential toxicology even at very low concentration. The main focus of this review is on the PFASs in soil and sediments. More specifically, this review systematically examines the occurrence and toxicological effects with associated risks, fate (i.e., PFASs adsorption by soil and sediment, transportation and transformation, and bioaccumulation), and remediation practices of PFASs in soil and sediment. Various models and equations such as fugacity-based multimedia fate and hydrodynamic models are used to study the fate, transport, and transformation of PFASs. Among different remediation practices, sorption is the dominant process for the removal of PFASs from soil and sediments. Results also indicate that PFASs adsorption onto activated carbon decrease with the increase of carbon chain length in the PFASs. The longer-chain PFASs have larger partition coefficient values than shorter-chained PFASs. Sorption of PFASs to soil and sediments are mainly governed by different electrostatic interactions, hydrogen bonds formation, hydrophobic interactions, organic content in soil and sediments, and ligand exchange. Other technology such as thermal treatment might be potential in the removal of PAFSs, but need further study to elucidate a conclusion. Finally, the associated challenges and future outlook have been included.

Effects of acidic and neutral biochars on properties and cadmium retention of soils.

In this study, an acidic biochar and a neutral biochar were applied at 5 wt% into two soils for an 11-month incubation experiment. One Ferrosol soil (Ba) was slightly acidic with low organic matter and the other Dermosol soil (Mt) was slightly alkaline with high organic matter. The acidic (pH = 3.25) wood shaving (WS) biochar had no marked impact on nutrient levels, cation exchange capacity (CEC), pH and acid neutralization capacity (ANC) of either soil. By contrast, the neutral (pH = 7.00) chicken litter (CL) biochar significantly increased major soluble nutrients, pH, ANC of soil Ba. In terms of C storage, 87.9% and 69.5% WS biochar-C can be sequestrated as TOC by soil Ba and Mt, respectively, whereas only 24.0% of CL biochar-C stored in soil Ba and negligible amount in Mt as TOC. Biochars did not have significant effects on soil sorption capacity and sorption reversibility except that CL biochar increased sorption of soil Ba by around 25.4% and decreased desorption by around 50.0%. Overall, the studied acidic C rich WS biochar held little agricultural or remedial values but was favourable for C sequestration. The neutral mineral rich CL biochar may provide short-term agricultural benefit and certain sorption capacities of lower sorption capacity soils, but may be unlikely to result in heightened C sequestration in soils. This is the first study comprehensively examining functions of acidic and neutral biochars for their benefits as a soil amendment and suggests the importance of pre-testing biochars for target purposes prior to their large scale production.

Removal of phosphorus by a high rate membrane adsorption hybrid system.

Membrane adsorption hybrid system (MAHS) was evaluated for the removal of phosphate from a high rate membrane bioreactor (HR-MBR) effluent. The HR-MBR was operated at permeate flux of 30L/m(2)h. The results indicated that the HR-MBR could eliminate 93.1±1.5% of DOC while removing less than 53% phosphate (PO4-P). Due to low phosphate removal by HR-MBR, a post-treatment of strong base anion exchange resin (Dowex(∗)21K-XLT), and zirconium (IV) hydroxide were used as adsorbent in MAHS for further removal of phosphate from HR-MBR effluent. It was found that the MAHS enabled to eliminate more than 85% of PO4-P from HR-MBR effluent. Hence, HR-MBR followed by MAHS lead to simultaneous removal of organics and phosphate in a reliable manner. The experiments were conducted only for a short period to investigate the efficiency of these resins/adsorbents on the removal of phosphorus and high rate MBR for organic removal.

Effect of organic loading rate on organic matter and foulant characteristics in membrane bio-reactor.

In this study, the influence of organic loading rate (OLR) on the performance of a membrane bio-reactor (MBR) was investigated. The MBR was operated with 6 different OLRs between 0.5 and 3.0 kg COD/m(3)d. The hydrodynamic parameters of the MBR were kept constant. The hydraulic retention time and sludge retention time were kept at 8h and 40 d respectively. From the experimental investigation, it was found that the removal efficiency of DOC, COD and NH(4)-N decreased when OLRs were increased from 0.5 to 3.0 kg COD/m(3)d. Higher OLRs of 2.75-3.0 kg COD/m(3)d resulted in a higher transmembrane pressure development. The fractionation of organic matters showed more hydrophilic substances with higher OLRs. A detailed organic matter characterization of membrane foulant, soluble microbial product and extracellular polymeric substances showed that bio-polymers type substances together with humic acid and lower molecular neutral and acids were responsible for membrane fouling.

Effect of imposed flux on fouling behavior in high rate membrane bioreactor.

The influence of imposed flux and aeration rates on membrane fouling in a submerged membrane bioreactor was studied. The experiments were conducted at four imposed fluxes and three aeration rates. The effect of flux on the reduction of membrane fouling was much higher than that caused by aeration rate. A lower flux of 20 L/m(2) h produced 75 times more water than a higher flux of 40 L/m(2) h with an aeration rate of 2 L/min. Low flux showed slightly higher removal of NH(4)-N and 93-96% removal of dissolved organic matter and chemical oxygen demand. Imposed flux also had a significant effect on the composition of organics present in the soluble microbial product (SMP) and extracellular polymeric substances (EPS). At a higher flux, both SMP and EPS had organics of high molecular weight (MW) of around 48 kDa as well as lower MW organics below 200 Da.