Identification of PSMB5 as a genetic modifier of fragile X-associated tremor/ataxia syndrome.

Fragile X­associated tremor/ataxia syndrome (FXTAS) is a debilitating late-onset neurodegenerative disease in premutation carriers of the expanded CGG repeat in FMR1 that presents with a spectrum of neurological manifestations, such as gait ataxia, intention tremor, and parkinsonism [P. J. Hagerman, R. J. Hagerman, Ann. N. Y. Acad. Sci. 1338, 58­70 (2015); S. Jacquemont et al., JAMA 291, 460­469 (2004)]. Here, we performed whole-genome sequencing (WGS) on male premutation carriers (CGG55­200) and prioritized candidate variants to screen for candidate genetic modifiers using a Drosophila model of FXTAS. We found 18 genes that genetically modulate CGG-associated neurotoxicity in Drosophila, such as Prosbeta5 (PSMB5), pAbp (PABPC1L), e(y)1 (TAF9), and CG14231 (OSGEPL1). Among them, knockdown of Prosbeta5 (PSMB5) suppressed CGG-associated neurodegeneration in the fly as well as in N2A cells. Interestingly, an expression quantitative trait locus variant in PSMB5, PSMB5rs11543947-A, was found to be associated with decreased expression of PSMB5 and delayed onset of FXTAS in human FMR1 premutation carriers. Finally, we demonstrate evidence that PSMB5 knockdown results in suppression of CGG neurotoxicity via both the RAN translation and RNA-mediated toxicity mechanisms, thereby presenting a therapeutic strategy for FXTAS.

Non-reporting of sport-related concussion symptoms: a cross-sectional study of community rugby league players in the UK.

Recognising and removing players with suspected sport-related concussions is crucial for community sports. OBJECTIVES: Quantify rates and factors associated with non-reporting of concussion symptoms in community rugby league. METHODS: Overall, 484 community rugby league players aged ≥18 years and 965 parents of rugby league players aged <18 years completed an online survey, regarding concussion history, knowledge, prevalence and reasons for non-reporting of concussion, long-term implications and perceptions of concussion. RESULTS: Thirty-five percent of players aged ≥18 years and 22% of parents of players aged <18 years reported at least one concussion in the last two seasons. Forty-three percent of players aged ≥18 years and 5% of parents of players aged<18 years surveyed stated they did not report concussion-related symptoms sustained during 2020 and 2021 seasons. The two most common reasons for non-reporting of concussion symptoms were 'didn't want to be ruled out of a match' and 'didn't want to let down the team'. Players aged ≥18 years who received external coaching pressures around concussion were more likely to not report concussion symptoms. Over 40% of parents and players were concerned about the potential long-term implications. Ten percent of players aged ≥18 years and 7% of parents of players aged <18 years would encourage their family members/children to not play rugby league. CONCLUSIONS: Non-reporting rates of suspected concussion symptoms in adult community players were twice as high as in professional rugby league, with similar reasons (wanting to play and not letting the team down). Engaging coaches to prioritise brain health and providing broader and appropriate education on concussion should be focused on, given the concerns reported by community players and parents.

Thoracic-Worn Accelerometers Detect Fatigue-Related Changes in Vertical Stiffness During Sprinting.

ABSTRACT: Horsley, BJ, Tofari, PJ, Halson, SL, Kemp, JG, Johnston, RD, and Cormack, SJ. Thoracic-worn accelerometers detect fatigue-related changes in vertical stiffness during sprinting. J Strength Cond Res 38(2): 283-289, 2024-Thoracic-mounted accelerometers are valid and reliable for analyzing gait characteristics and may provide the opportunity to assess running-related neuromuscular fatigue (NMF) during training and competition without the need for additional tests, such as a countermovement jump (CMJ). However, their sensitivity for detecting fatigue-related changes in gait across different speeds is unclear. We, therefore, assessed the changes in accelerometer-derived gait characteristics, including vertical stiffness (K vert ), following a repeated sprint protocol (RSP). Sixteen recreationally active subjects performed single and repeated CMJs on a force plate and 40 m run throughs overground at 3-4, 5-6, and 7-8 m·s -1 pre-post a 12 × 40 m RSP. Gait characteristics (contact time, step frequency, step length, K vert , etc.) were derived from an accelerometer contained within a global navigation satellite system unit on the thoracic spine using a validated algorithm. Changes in running gait and CMJ performance were assessed using a linear mixed-effects model (95% confidence interval [95% CI]; effect size [ES]). Significance was set at p < 0.05. A significant reduction in K vert occurred at 7-8 m·s -1 following the RSP (-8.51 kN·m -1 [-13.9, -3.11]; p = 0.007; ES [95% CI] = -0.39 [-0.62, -0.15]) which coincided with a decreased jump height (-0.03 m [-0.04, -0.01]; p = 0.002; ES [95% CI] = -0.87 [-1.41, -0.30]). However, all other gait characteristics were not significantly different irrespective of speed. Thoracic-worn accelerometers can detect changes in K vert at 7-8 m·s -1 which may be useful for monitoring NMF during sprinting. However, a RSP does not result in altered gait mechanics in subsequent running at lower speeds.

The Effects and Reproducibility of 10, 20, and 30% Velocity Loss Thresholds on Acute and Short-Term Fatigue and Recovery Responses.

ABSTRACT: Weakley, J, Johnston, RD, Cowley, N, Wood, T, Ramirez-Lopez, C, McMahon, E, and García-Ramos, A. The effects and reproducibility of 10, 20, and 30% velocity loss thresholds on acute and short-term fatigue and recovery responses. J Strength Cond Res 38(3): 465-473, 2024-This study aimed to establish the effects and reproducibility of implementing 10, 20, and 30% velocity loss thresholds (VLTs) during the free-weight barbell back squat on acute and short-term perceived soreness, neuromuscular fatigue, and physical performance. Using a repeated, counterbalanced, crossover design, 12 team-sport athletes completed on separate sessions 5 sets of the free-weight barbell back-squat until reaching VLTs of either 10, 20, or 30%. Outcomes were measured immediately postexercise and 24 hours after each session. To assess reproducibility, the same sessions were repeated after 4 weeks. Immediately postexercise, small differences in countermovement jump (CMJ) and 10-m sprint performance were observed between VLT conditions, whereas small to moderate differences in differential ratings of perceived exertion were reported (10% < 20% < 30%). At 24 hours, trivial differences in CMJ outcomes were found but small differences in 10-m sprint performance were detected between conditions (10% < 20% < 30%). In addition, at 24 hours, a single small difference in radial deformation using tensiomyography was found between 10 and 30% conditions, whereas large to very large differences in perceived soreness were reported between conditions (10% < 20% < 30%). Finally, the standard error of measurement of all outcome measures at 24 hours were of a similar magnitude to those reported in tightly controlled, short-term studies. Collectively, these findings demonstrate that VLTs help control the fatigue outcomes that occur as a response to resistance training and that they are reproducible. Therefore, for practitioners who wish to prescribe resistance training and be confident in the subsequent fatigue response, it is strongly advised that VLTs are implemented.

Validity and Reliability of Thoracic-Mounted Inertial Measurement Units to Derive Gait Characteristics During Running.

ABSTRACT: Horsley, BJ, Tofari, PJ, Halson, SL, Kemp, JG, Chalkley, D, Cole, MH, Johnston, RD, and Cormack, SJ. Validity and reliability of thoracic-mounted inertial measurement units to derive gait characteristics during running. J Strength Cond Res 38(2): 274-282, 2024-Inertial measurement units (IMUs) attached to the tibia or lumbar spine can be used to analyze running gait but, with team-sports, are often contained in global navigation satellite system (GNSS) units worn on the thoracic spine. We assessed the validity and reliability of thoracic-mounted IMUs to derive gait characteristics, including peak vertical ground reaction force (vGRF peak ) and vertical stiffness (K vert ). Sixteen recreationally active subjects performed 40 m run throughs at 3-4, 5-6, and 7-8 m·s -1 . Inertial measurement units were attached to the tibia, lumbar, and thoracic spine, whereas 2 GNSS units were also worn on the thoracic spine. Initial contact (IC) from a validated algorithm was evaluated with F1 score and agreement (mean difference ± SD ) of gait data with the tibia and lumbar spine using nonparametric limits of agreement (LoA). Test-retest error {coefficient of variation, CV (95% confidence interval [CI])} established reliability. Thoracic IMUs detected a nearly perfect proportion (F1 ≥ 0.95) of IC events compared with tibia and lumbar sites. Step length had the strongest agreement (0 ± 0.04 m) at 3-4 m·s -1 , whereas contact time improved from 3 to 4 (-0.028 ± 0.018 second) to 7-8 m·s -1 (-0.004 ± 0.013 second). All values for K vert fell within the LoA at 7-8 m·s -1 . Test-retest error was ≤12.8% for all gait characteristics obtained from GNSS units, where K vert was most reliable at 3-4 m·s -1 (6.8% [5.2, 9.6]) and vGRF peak at 7-8 m·s -1 (3.7% [2.5, 5.2]). The thoracic-spine site is suitable to derive gait characteristics, including K vert , from IMUs within GNSS units, eliminating the need for additional sensors to analyze running gait.

Development of complex executive function over childhood: Longitudinal growth curve modeling of performance on the Groton Maze Learning Task.

This longitudinal study modeled children's complex executive function (EF) development using the Groton Maze Learning Task (GMLT). Using a cohort-sequential design, 147 children (61 males, 5.5-11 years) were recruited from six multicultural primary schools in Melbourne and Perth, Australia. Race/ethnicity data were not available. Children were assessed on the GMLT at 6-month intervals over 2-years between 2010 and 2012. Growth curve models describe age-related change from 5.5 to 12.5 years old. Results showed a quadratic growth trajectory on each measure of error-that is, those that reflect visuospatial memory, executive control (or the ability to apply rules for action), and complex EF. The ability to apply rules for action, while a rate-limiting factor in complex EF, develops rapidly over early-to-mid childhood.

The speed and acceleration of the ball carrier and tackler into contact during front-on tackles in rugby league.

The aim was to use a combination of video analysis and microtechnology (10 Hz global positioning system [GPS]) to quantify and compare the speed and acceleration of ball-carriers and tacklers during the pre-contact phase (contact - 0.5s) of the tackle event during rugby league match-play. Data were collected from 44 professional male rugby league players from two Super League clubs across two competitive matches. Tackle events were coded and subject to three stages of inclusion criteria to identify front-on tackles. 10 Hz GPS data was synchronised with video to extract the speed and acceleration of the ball-carrier and tackler into each front-on tackle (n = 214). Linear mixed effects models (effect size [ES], confidence intervals, p-values) compared differences. Overall, ball-carriers (4.73 ± 1.12 m∙s-1) had greater speed into front-on tackles than tacklers (2.82 ± 1.07 m∙s-1; ES = 1.69). Ball-carriers accelerated (0.67 ± 1.01 m∙s-2) into contact whilst tacklers decelerated (-1.26 ± 1.36 m∙s-2; ES = 1.74). Positional comparisons showed speed was greater during back vs. back (ES = 0.66) and back vs. forward (ES = 0.40) than forward vs. forward tackle events. Findings can be used to inform strategies to improve performance and player welfare.

Comparison of Sprint Timing Methods on Performance, and Displacement and Velocity at Timing Initiation.

ABSTRACT: Weakley, J, McCosker, C, Chalkley, D, Johnston, R, Munteanu, G, and Morrison, M. Comparison of sprint timing methods on performance, and displacement and velocity at timing initiation. J Strength Cond Res 37(1): 234-238, 2023-Sprint testing is commonly used to assess speed and acceleration in athletes. However, vastly different outcomes have been reported throughout the literature. These differences are likely due to the sprint timing method rather than differences in athlete ability. Consequently, this study compared different sprint starting methods on sprint time and quantified the velocity and displacement of the athlete at the moment timing is initiated. Starting in a staggered 2-point stance, 12 team sport athletes were required to accelerate 10 meters for 10 repetitions. During each repetition, 5 independent timing methods were triggered. The methods were (a) triggering a Move sensor; (b) starting 50 cm behind the line; (c) triggering a front-foot switch; (d) triggering a rear-foot switch; and (e) starting with the front foot on the line. Timing for each method was initiated at different points during the acceleration phase, and the displacement and velocity of the centroid of the pelvis at the point of timing initiation was assessed under high-speed motion capture. The Move sensor had the smallest displacement and lowest velocity at the point of timing initiation, whereas the front-foot trigger demonstrated the largest displacement and highest velocities. Trivial to very large effect size differences were observed between all methods in displacement and velocity at the point of timing initiation. Furthermore, small to very large differences in time to 5 m were found. These findings emphasize that sprint outcomes should not be compared, unless starting methods are identical. In addition, to detect real change in performance, consistent standardized protocols should be implemented.

The Criterion Validity and Between-Day Reliability of the Perch for Measuring Barbell Velocity During Commonly Used Resistance Training Exercises.

ABSTRACT: Weakley, J, Munteanu, G, Cowley, N, Johnston, R, Morrison, M, Gardiner, C, Pérez-Castilla, A, and García-Ramos, A. The criterion validity and between-day reliability of the Perch for measuring barbell velocity during commonly used resistance training exercises. J Strength Cond Res 37(4): 787-792, 2023-This study aimed to assess the criterion validity and between-day reliability (accounting for technological and biological variability) of mean and peak concentric velocity from the Perch measurement system. On 2 testing occasions, 16 subjects completed repetitions at 20, 40, 60, 80, 90, and 100% of 1-repetition maximum in the free-weight barbell back squat and bench press. To assess criterion validity, values from the Perch and a 3-dimensional motion capture system (criterion) were compared. Technological variability was assessed by determining whether the differences between the Perch and criterion for each load were comparable for both testing sessions, whereas between-day reliability with both technological and biological variability was calculated from Perch values across days. Generalized estimating equations were used to calculate R2 and root mean square error, whereas Bland-Altman plots assessed magnitude of difference between measures. To support monitoring of athletes over time, standard error of measurement and minimum detectable changes (MDC) were calculated. There was excellent agreement between the Perch and criterion device, with mean velocity in both exercises demonstrating a mean bias ranging from -0.01 to 0.01 m·s -1 . For peak velocity, Perch underestimated velocity compared with the criterion ranging from -0.08 to -0.12 m·s -1 for the back squat and -0.01 to -0.02 m·s -1 for the bench press. Technological variability between-days were all less than the MDC. These findings demonstrate that the Perch provides valid and reliable mean and peak concentric velocity outputs across a range of velocities. Therefore, practitioners can confidently implement this device for the monitoring and prescription of resistance training.

The Distribution of Match Activities Relative to the Maximal Mean Intensities in Professional Rugby League and Australian Football.

ABSTRACT: Johnston, RD, Thornton, HR, Wade, JA, Devlin, P, and Duthie, GM. The distribution of match activities relative to the maximal mean intensities in professional rugby league and Australian football. J Strength Cond Res 36(5): 1360-1366, 2022-This study determined the distribution of distance, impulse, and accelerometer load accumulated at intensities relative to the maximal mean 1-minute peak intensity within professional rugby league and Australian football. Within 26 rugby league (n = 24 athletes) and 18 Australian football (n = 38 athletes) games, athletes wore global navigation satellite system devices (n = 608 match files). One-minute maximal mean values were calculated for each athlete per game for speed (m·minP-1P), accelerometer load (AU·minP-1P), and acceleration (m·sP-2P). Volumes for each parameter were calculated by multiplying by time, specifying total distance, accelerometer load, and impulse. The distribution of intensity of which these variables were performed relative to the maximal mean was calculated, with percentages ranging from 0-110%, separated into 10% thresholds. Linear mixed models determined whether the distribution of activities within each threshold varied, and positional differences. Effects were described using standardized effect sizes (ESs), and magnitude-based decisions. Across both sports, the distribution of activity (%) largely reduced the closer to the maximal mean 1-minute peak and was highest at ∼60% of the maximal mean peak. When compared with Australian football, a higher percentage of total distance was accumulated at higher intensities (70-80% and 100-110%) for rugby league (ES range = 0.82-0.87), with similar, yet larger differences for accelerometer load >80% (0.78-1.07) and impulse >60% (1.00-2.26). These findings provide information of the volume of activities performed relative to the mean maximal 1-minute peak period, which may assist in the prescription of training.

Quantifying the Movement Characteristics of Australian Football League Women's Competition.

ABSTRACT: Thornton, HR, Armstrong, CR, Gamble, T, Rigby, A, Johnston, RD, and Duthie, GM. Quantifying the movement characteristics of Australian Football League Women's competition. J Strength Cond Res 36(12): 3415-3421, 2022-The purpose is to provide an overview of the externally measured movement characteristics of Australian Football League Women's (AFLW) competition, and the variability in this between matches. A range of movement variables were measured from 28 athletes who wore 10-Hz global positioning system devices during games and were summarized according to positional groups. The variance in each athlete's match loads for each round were expressed using standardized scores ( z -scores), and the change compared with the first game played was calculated and expressed as a standard deviation. Furthermore, using the raw export, moving means (1-10 minutes) of speed (m·min -1 ) and acceleration (m·s -2 ) were calculated. Following log transformation of the maximal means, intercept and slopes were calculated. Linear mixed models identified differences between positional groups for match loads, and intercept and slopes. Effects were described using standardized effect sizes (ESs) and magnitude-based decisions. There were no substantial and unclear differences between positional groups for match loads (ES range; ±confidence limits = 0.10-0.80; ±0.30-4.30) and for intercept and slopes (ES range; 0.04-0.44; ±0.52-2.11). Large within-athlete variation in match demands between rounds was observed ( z -score up to -1.8 SD for distance), and the maximal means for speed and acceleration demonstrate the extensive physical demands of AFLW competition. These data describe the intense and variable physical demands of AFLW competition, and further provide novel information regarding the maximal mean intensities and intercept and slopes, which should assist practitioners in planning and prescribing training in preparation for competition.

Relationship Between Preseason Training Load, Match Performance, and Match Activities in Professional Rugby League.

ABSTRACT: Crang, ZL, Hewitt, A, Scott, TJ, Kelly, VG, and Johnston, RD. Relationship between pre-season training load, match performance and match activities in professional rugby league. J Strength Cond Res 36(9): 2581-2588, 2022-This study aimed to establish the relationship between preseason training loads, technical match performance, and physical match activities in rugby league. Twenty-two professional rugby league players (age: 24.7 ± 4.0 years; height: 184.3 ± 4.7 cm; and body mass: 101.1 ± 9.9 kg) participated in the study. Training loads and physical match activities were monitored using global positioning systems. Total distance (m), high-speed running distance (VT 1IFT ; distance covered above estimated first ventilatory threshold [≥68% of 30-15 intermittent fitness test]) and total session rating of perceived exertion from all field-based (32.5 ± 8.5) and gym-based sessions (39.1 ± 12.5) were used to quantify preseason loads. Physical match activities were measured as total and high-speed running distance relative to individual playing time, whereas technical match activities and performance scores were used to evaluate individual match performance. To examine the relationship between physical match activities, technical performance, and preseason load, Pearson's correlation coefficients were quantified for each in-season game before performing a Fisher Z Transformation. Preseason high-speed running distance was positively associated with high-speed match activities ( r = 0.34-0.51), whereas negatively associated with technical performance scores ( r = -0.51 to -0.35) and hit up m·min -1 of match-play ( r = -0.30 to -0.17). It seems high speed running performed in the preseason period positively influences in-season physical match activity profiles, however, are unlikely to positively impact technical match performance.

Peak Movement and Technical Demands of Professional Australian Football Competition.

ABSTRACT: Johnston, RD, Murray, NB, Austin, DJ, and Duthie, G. Peak movement and technical demands of professional Australian football competition. J Strength Cond Res 35(10): 2818-2823, 2021-The aim of this study was to determine the average peak movement and technical demands of professional Australian football (AF) across a number of period durations using an observational cohort design. This information will be able to guide duration-specific intensities for training drills. Microtechnology and technical performance data were recorded across 22 games of the 2017 AF League season. The peak 1-, 3-, 5-, 7-, and 10-minute rolling periods were determined from each game for each player for each frequency of skill involvements. Average speed (m·min-1) and accelerometer load (PlayerLoad; PL·min-1) were used as measures of physical output, and any disposal of the football or tackle was used as a technical involvement. Linear mixed models and Cohen's effect size (ES) statistic were used to determine the impact technical involvements had on movement profiles. There were substantial reductions in average speed across each duration as the number of technical involvements increased, other than for the 10-minute period. The reductions in speed were greatest during the 1-minute period for 1 (ES = -0.59 ± 0.13), 2 (ES = -1.96 ± 0.17), and 3 (ES = -2.39 ± 0.27) involvements. Similarly, less pronounced reductions were seen for accelerometer load, other than during the 7- and 10-minute periods where there were small to moderate increases in load for periods with technical involvements. Players may have to perform as many as 3 technical involvements a minute while covering 150-160 m·min-1. This information provides coaches with the peak speed, accelerometer load, and technical demands of competition. There are reductions in movement profiles as the number of technical involvements increases.

Validity of Real-Time Ultra-wideband Global Navigation Satellite System Data Generated by a Wearable Microtechnology Unit.

Johnston, RD, Hewitt, A, and Duthie, G. Validity of real-time ultra-wideband global navigation satellite system data generated by a wearable microtechnology unit. J Strength Cond Res 34(7): 2071-2075, 2020-This study aimed to determine the validity of real-time ultra-wideband data generated by a wearable microtechnology unit during rugby league training sessions using a repeated-measures crossover study. Twenty-four semiprofessional rugby league players wore a commercially available microtechnology device (StatSports Apex, Newry, Northern Ireland) during 10 training sessions. Total distance; moderate-speed running (3.6-4.9 m·s); high-speed running (5.0-6.9 m·s); very high-speed running (≥7 m·s); maximum velocity (m·s); the number of high-intensity accelerations (≥2.78 m·s) and decelerations (≥-2.78 m·s); dynamic stress load (AU); and high metabolic load distance (m) were recorded in real time through an Apex beacon over a secured wireless network before being exported to a csv file at the end of the session. The data were then downloaded to a computer after event. To determine the validity of the real-time data, they were compared with the postevent downloaded data using coefficient of variation and Pearson's correlation coefficient. There was almost perfect agreement between real-time and postevent downloaded data for all variables reported. The overall bias effect size scores were all trivial, ranging from 0.00 for total distance and high-speed running up to -0.12 for maximal velocity; Pearson's correlations were either perfect or nearly perfect (r = 0.98-1.00). Irrespective of the movement speed, the data collected by these devices in real time show excellent levels of agreement with postevent downloaded data.

Criterion Validity, and Interunit and Between-Day Reliability of the FLEX for Measuring Barbell Velocity During Commonly Used Resistance Training Exercises.

Weakley, J, Chalkley, D, Johnston, R, García-Ramos, A, Townshend, A, Dorrell, H, Pearson, M, Morrison, M, and Cole, M. Criterion validity, and interunit and between-day reliability of the FLEX for measuring barbell velocity during commonly used resistance training exercises. J Strength Cond Res 34(6): 1519-1524, 2020-The aim of this study was to assess the criterion validity, interunit reliability (accounting for technological and biological variance), and between-day reliability of a novel optic laser device (FLEX) for quantifying mean concentric velocity. To assess the validity against a three-dimensional motion capture system and interunit reliability with both technological and biological variation, 18 men and women completed repetitions at 20, 40, 60, 80, 90, and 100% of one repetition maximum in the free-weight barbell back squat and bench press. To assess interunit (technological only) reliability, a purpose-built, calibrated rig completed a set protocol with 2 devices. To assess between-day reliability of the technology, the same protocol was repeated 21 days later. Standardized bias, typical error of the estimate (TEE; %), and Pearson's correlation coefficient (r) were used to assess validity, whereas typical error and coefficient of variation (CV%) were calculated for reliability. Overall, TEE (±90 CL) between the FLEX and criterion measure was 0.03 (±0.004) and 0.04 (±0.005) m·s in the back squat and bench press, respectively. For measures of reliability, overall interunit technological variance (CV% [± 90% confidence interval]) was 3.96% (3.83-4.12) but increased to 9.82% (9.31-10.41) and 9.83% (9.17-10.61) in the back squat and bench press, respectively, when biological variance was introduced. Finally, the overall between-day reliability was 3.77% (3.63-3.91). These findings demonstrate that the FLEX provides valid and reliable mean concentric velocity outputs across a range of velocities. Thus, practitioners can confidently implement this device for the monitoring and prescription of resistance training loads.

Peak movement and collision demands of professional rugby league competition.

To quantify the peak movement and contact demands of National Rugby League (NRL) and European Super League (ESL) competition players were tracked during 10 NRL (166 files) and 10 ESL (143 files) matches using microtechnology devices. The peak 1- to 5-min periods were then calculated for average match speed (m·min-1), and acceleration (m·s-2) when 0, 1, 2, and ≥3 collisions per min occurred. Linear mixed effect models and Cohen's effect size statistic (± 90%CI) were used to determine the differences in movement profiles when collisions occurred. Compared to no collision periods, as frequency of collisions per minute increased, there were progressive reductions in running speed for most positional groups. The addition of 1 or more collisions per min resulted in average effect size reductions in match speed of -0.14 for NRL forwards, -0.89 for NRL backs, -0.48 for ESL forwards, and -2.41 for ESL backs. ESL forwards had the highest frequency of peak periods involving 3 or more collisions per min, 22% of all periods, followed by NRL forwards (14%), NRL backs (10%) and ESL backs (8%). This study highlights the peak movement and collision demands of professional rugby league competition and allows practitioners to develop training drills that reflect worst case scenarios.

The peak duration-specific locomotor demands and concurrent collision frequencies of European Super League rugby.

Understanding the most demanding passages of European Super League competition can optimise training prescription. We established positional and match half differences in peak relative distances (m·min-1) across durations, and the number of collisions, high-speed- and very-high-speed-distance completed in the peak 10 min period. Moving-averages (10 s, 30 s, 1 min, 5 min, 10 min) of instantaneous speed (m·s-1) were calculated from 25 professional rugby league players during 25 matches via microtechnology. Maximal m·min-1 was taken for each duration for each half. Concurrently, collisions (n), high-speed- (5 to 7 m·s-1; m) and very-high-speed-distance (> 7 m·s-1; m) were coded during each peak 10 min. Mixed-effects models determined differences between positions and halves. Aside from peak 10 s, trivial differences were observed in peak m·min-1 between positions or halves across durations. During peak 10 min periods, adjustables, full- and outside-backs ran more at high-speed and very-high-speed whilst middle- and edge-forwards completed more collisions. Peak m·min-1 is similar between positional groups across a range of durations and are maintained between halves of the match. Practitioners should consider that whilst the overall peak locomotor "intensity" is similar, how they achieve this differs between positions with forwards also exposed to additional collision bouts.

Using Microtechnology to Quantify Torso Angle During Match-Play in Field Hockey.

Warman, GE, Cole, MH, Johnston, RD, Chalkley, D, and Pepping, GJ. Using microtechnology to quantify torso angle during match-play in field hockey. J Strength Cond Res 33(10): 2648-2654, 2019-Field hockey is played in a dynamic environment placing specific postural demands on athletes. Little research has been devoted to understanding the nature of a player's torso postures in field hockey match-play and its relationship with the perceptuomotor demands of the sport. We used commercially available microtechnology worn by 16 athletes during a 6-match national tournament to quantify torso flexion/extension angles. Orientation was derived using the inertial and magnetic sensors housed within global positioning system devices, assessing torso angle in the sagittal plane from 91 individual match files. The main independent variable was playing position, whereas the dependent variable was torso flexion/extension, presented as a percentage of playing time spent in 15 × 10° torso postural bands ranging from ≥40° extension to ≥90° flexion. It was shown that athletes spent 89.26% of their playing time in various torso postures, ranging from 20 to 90° of flexion. Defenders spent more time than midfielders (p = 0.004, effect size [ES] = 0.43) and strikers (p = 0.004; ES = 0.44) in the posture band of 10-20° torso flexion, whereas midfielders spent more time between 20 and 30° of torso flexion (p = 0.05; ES = 0.32) than strikers. Conversely, strikers spent more time between 30 and 40° of flexion than defenders (p < 0.001; ES = 0.74). These results reflect the sport-specific and role-specific torso angles adopted by field hockey athletes during match-play. Coaching staff can use these data to gain insight into the postural demands of their sport and inform the preparation of athletes for the perception-action demands of competition.

The Influence of Contextual Factors on Running Performance in Female Australian Football Match-Play.

Black, GM, Gabbett, TJ, Naughton, G, Cole, MH, Johnston, RD, and Dawson, B. The influence of contextual factors on running performance in female Australian football match-play. J Strength Cond Res 33(9): 2488-2495, 2019-Given the recent growth of the professional status among multiple female football codes, the aim of this study is to investigate the effects of contextual factors on activity profiles and pacing strategies in female Australian football (AF) players. Thirty-five female AF players participated in this study. Global positioning system analysis was completed over 1 competitive season. Matches were separated into eight 10-minute periods. Greater distances were covered during the first half irrespective of playing position (effect size [ES] = 0.39-0.50, Likelihood ≥90%). Throughout a number of periods half-backs (defensive players) covered greater distances during losses (ES ≥ 0.74, Likelihood ≥92%) and against top 3 opponents (ES ≥ 1.0, Likelihood ≥97%). Midfielders and half-backs covered greater distances (ES ≥ 0.49, Likelihood ≥89%) in the final match period in winning compared with losing matches. A reduction in player work rate is evident during the second half of matches. The influence of contextual factors varied across positional groups. However, it is clear that coaches could use player rotation both early in the match in an attempt to delay the effect of fatigue and more frequently during the second half to increase running intensity.

Relationship Between Training Load, Fitness, and Injury Over an Australian Rules Football Preseason.

Recent research identifies that certain training load (TL) patterns increase the injury risk to athletes. However, physical fitness must also be considered to establish optimal TL patterns. The aim of this study was to identify TL patterns optimal for injury and aerobic fitness by exploring the TL-injury and TL-fitness relationship concurrently over an Australian rules football (ARF) preseason. Individual TL, aerobic fitness, and injury data were collected over a 14-week preseason in 60 subelite ARF players (age = 21.3 ± 2.9 years). Individual TL, assessed through session rating of perceived exertion (sRPE), was compared with noncontact, lower limb soft tissue injury to examine the TL-injury relationship. A 2-km time trial was used as the measure of aerobic fitness to examine the optimal TL for aerobic fitness improvement. Aerobic fitness improved by 4.10 ± 2.20% (range = -7.35-19.05%) over the preseason. Training load between 1,600 and 2,000 AU per week was associated with the greatest aerobic fitness improvement (effect size [ES] = 0.47-1.01). Players with preseason TL <1,250 AU per week had the highest injury rate (ES = 0.52-0.62). Large 2-week TL (>4,000 AU, odds ratio [OR] = 2.80) and spikes in weekly TL (15-49%, OR = 3.76) significantly increased injury risk the following week. Performing small amounts of training seems to be the most detrimental to changes in aerobic fitness and injury rate. High TL is not responsible for injuries and is required to maximize improvements in aerobic fitness. However, TL exceeding 2,000 AU over several weeks may attenuate aerobic fitness improvements and increase injury risk. In addition, large increments in weekly TL increase injury risk.