RESUMEN
Amphiphilic block copolymer micelles can mimic the ability of natural lung surfactant to reduce the air-water interfacial tension close to zero and prevent the Laplace pressure-induced alveolar collapse. In this work, we investigated the air-water interfacial behaviors of polymer micelles derived from eight different poly(ethylene glycol) (PEG)-based block copolymers having different hydrophobic block chemistries to elucidate the effect of the core block chemistry on the surface mechanics of the block copolymer micelles. Aqueous micelles of about 30 nm in hydrodynamic diameter were prepared from the PEG-based block copolymers via equilibration-nanoprecipitation (ENP) and spread on the water surface using water as the spreading medium. Surface pressure-area isotherm and quantitative Brewster angle microscopy (QBAM) measurements were performed to investigate how the micelle/monolayer structures change during lateral compression of the monolayer; widely varying structural behaviors were observed, including the wrinkling/collapse of micelle monolayers and deformation and/or the desorption of individual micelles. By bivariate correlation regression analysis of surface pressure-area isotherm data, it was found that the rigidity and hydrophobicity of the hydrophobic core domain, which are quantified by glass-transition temperature (Tg) and water contact angle (θ) measurements, respectively, are coupled factors that need to be taken into account concurrently in order to control the surface mechanical properties of polymer micelle monolayers; micelles having rigid and strongly hydrophobic cores exhibited high surface pressure and a high compressibility modulus under high compression. High surface pressure and a high compressibility modulus were also found to be correlated with the formation of wrinkles in the micelle monolayer (visualized by Brewster angle microscopy (BAM)). From this study, we conclude that polymer micelles based on hydrophobic block materials having higher Tg and θ are more suitable for surfactant replacement therapy applications that require the therapeutic surfactant to produce a high surface pressure and modulus at the alveolar air-water interface.
RESUMEN
Single-component polymeric materials open up a great potential for self-assembly into mesoscale complex crystal structures that are known as Frank-Kasper (FK) phases. Predicting the packing structures of the soft-matter spheres, however, remains a challenge even when the molecular design is precisely known. Here, we investigate the role of the molecules' enthalpic interaction in determining the low-symmetry crystal structures. To this end, we synthesize architecturally asymmetric dendrons by varying their apex functionalities and examine the packing structures of the second-generation (G2) dendritic wedges. Our work shows that weakening the hydrogen bonding of the dendron apex makes the particles softer and smaller, and leads to the formation of various FK structures at lower temperatures, including the new observation of a FK C14 phase in the cone-shaped dendron systems. As a consequence of the free energy balance between the particle's interfacial tension and the chain's stretching, various packing structures are mainly tuned by designing the hydrogen bonding interaction.
RESUMEN
In the search for the formation of Frank-Kasper phases from diblock copolymer self-assembly, a series of compositionally asymmetric poly(dimethylsiloxane)-b-poly(2,2,2-triflouroethyl acrylate)s (PDMS-b-PTFEAs) are synthesized to produce PDMS-rich phases with PDMS volume fractions (fPDMS ) ranging from 0.746 to 0.869. As determined by small-angle X-ray scattering analysis, the Frank-Kasper σ and C14 phases are identified at fPDMS = 0.796 and 0.851, respectively, plausibly due to high conformational asymmetry (ε ≈ 2.20) between the two blocks. Intriguingly, the σ phase develops during heating from a short-range liquid-like packing (LLP) state, whereas the C14 phase is achieved at room temperature, which are both followed by a disordering at higher temperatures. Based on thermal experiments from a super cooled disordered state, the findings further provide compelling evidence of an LLP-hexagonally packed cylinder-σ transition and a direct pathway to the C14 phase during heating from an LLP state.
Asunto(s)
Acrilatos/química , Dimetilpolisiloxanos/química , Conformación MolecularRESUMEN
Protein therapeutics, particularly antibodies, depend on maintaining their native structures for optimal function. Hydrophobic interfaces, such as the air-water interface, can trigger protein aggregation and denaturation. While completely avoiding such interfacial exposures during manufacturing and storage is impractical, minimizing them is crucial for enhancing protein drug stability and extending shelf life. In the biologics industry, surfactants like polysorbates are commonly used as additives (excipients) to mitigate these undesirable interfacial exposures. However, polysorbates, the most prevalent choice, have recognized limitations in terms of polydispersity, purity, and stability, prompting the exploration of alternative excipients. The present study identifies poly(N-isopropylacrylamide)-poly(ethylene glycol) (PNIPAM-PEG) block copolymers as a promising alternative to polysorbates. Due to its stronger affinity for the air-water interface, PNIPAM-PEG significantly outperforms polysorbates in enhancing protein stability. This claim is supported by results from multiple tests. Accelerated dynamic light scattering (DLS) experiments demonstrate PNIPAM-PEG's exceptional efficacy in preserving IgG stability against surface-induced aggregation, surpassing conventional polysorbate excipients (Tween 80 and Tween 20) under high-temperature conditions. Additionally, circular dichroism (CD) spectroscopy results reveal conformational alterations associated with aggregation, with PNIPAM-PEG consistently demonstrates a greater protective effect by mitigating negative shifts at λ â 220 nm, indicative of changes in secondary structure. Overall, this study positions PNIPAM-PEG as a promising excipient for antibody therapeutics, facilitating the development of more stable and effective biopharmaceuticals.
RESUMEN
The Liesegang pattern is a beautiful natural anisotropic patterning phenomenon observed in rocks and sandstones. This study reveals that the Liesegang pattern can induce nonlinear elasticity. Here, a Liesegang-patterned complex with biomineral-hydrogel repetitive layers is prepared. This Liesegang-patterned complex is obtained only when the biomineralization is performed under the supersaturated conditions. The Liesegang-patterned complex features a nonlinear elastic response, whereas a complex with a single biomineral shell shows a linear behavior, thus demonstrating that the Liesegang pattern is essential in achieving nonlinear elasticity. The stiff biomineral layers have buffered the concentrated energy on behalf of soft hydrogels, thereby exposing the hydrogel components to reduced stress and, in turn, enabling them to perform the elasticity continuously. Moreover, the nonlinear elastic Liesegang-patterned complex exhibits excellent stress relaxation to the external loading, which is the biomechanical characteristic of cartilage. This stress relaxation allows the bundle of fiber-type Liesegang-patterned complex to endure greater deformation.
RESUMEN
Upon exposure to UV light (120 mW/cm2, λ = 365 nm), a trans-cis isomerization occurs in a cylinder-forming, azobenzene-containing block copolymer of polydimethylsiloxane-b-poly((4(phenyldiazenyl)phenoxy)hexyl acrylate) (PDMS-b-PPHA) that enables the generation of monodomains of healable, long-range ordered arrays of nanoscopic domains over macroscopic distances. The trans-cis isomerization gives rise to a significant increase in the dielectric constant (from 6.52 to 19.8 at 100 Hz, photodielectric behavior) and a dramatic decrease in the Tg (from 54 to 1 °C, photoplastic behavior) of the PPHA block. By combining these characteristics with an in-plane electric field, macroscopic monodomains of near-perfectly aligned cylindrical microdomains are achieved at low temperatures, and a damage repair is clearly uncovered, where the 300 nm wide scratches can be completely healed at 40 °C, leaving a smooth, uniformly thick film where the continuity and orientation of the aligned microdomains are restored. Subsequent exposure to visible light causes a cis-trans isomerization, increasing the matrix Tg to 54 °C, producing highly oriented and aligned PDMS cylindrical microdomains in a PPHA matrix.
RESUMEN
Unique sphere-packing mesophases such as Frank-Kasper (FK) phases have emerged from the viable design of intermolecular interactions in supramolecular assemblies. Herein, a series of Cn-G2-CONH2 dendrons possessing an identical core wedge are investigated to elucidate the impact of peripheral alkyl chain lengths (Cn) on the formation of the close-packed structures. The C18 and C14 dendrons, of which the contour lengths of the periphery Lp are longer than the wedge length Lw, assemble into a uniform sphere-packing phase such as body-centred cubic (BCC), whereas the C8 dendron with short (Lp < Lw) corona environment forms the FK A15 phase. Particularly in the intermediate C12 and C10 dendrons (Lp ≈ Lw), cooling the samples from an isotropic state leads to cooling-rate-dependent phase behaviours. The C12 dendron produces two structures of hexagonal columnar and sphere-packing phases (BCC and A15), while the C10 dendron generates the A15 and σ phases by the fast- and slow-cooling processes, respectively. Our results show the impact of peripheral alkyl chain lengths on the formation of mesocrystal phases, where the energy landscape of the dendrons at Lp/Lw ≈ 1 must be more complex and delicate than those with either longer or shorter peripheral alkyl chains.
RESUMEN
Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.
Asunto(s)
Pérdida de Hueso Alveolar , Periodontitis , Humanos , Regeneración Tisular Guiada Periodontal , Cicatrización de Heridas/fisiología , Encía , Membranas Artificiales , Regeneración Ósea/fisiologíaRESUMEN
The close-packed mesocrystal structures from soft-matter assemblies have recently received attention due to their structural similarity to atomic crystals, displaying various sphere-packing Frank-Kasper (FK) and quasicrystal structures. Herein, diverse mesocrystal structures are explored in second-generation dendrons (G2-X) designed with identical wedges, in which the terminal functionalities X = CONH2 and CH2NH2 represent two levels of the strong and weak hydrogen-bonding apexes, respectively. The cohesive interactions at the core apex, referred to as the core interactions, are effectively modulated by forming heterogeneous hydrogen bonds between these two functional units. For the dendron assemblies compositionally close to each pure component of G2-CONH2 and G2-CH2NH2, their own FK A15 and C14 phases dominate other phases, respectively. We show the existence of the wide-range FK σ including the dodecagonal quasicrystal (DDQC) phases from the dendron mixtures between G2-CONH2 and G2-CH2NH2, providing an experimental phase sequence of A15-σ-DDQC-C14 as the core interactions are alleviated. Intriguingly, the temperature dependence of particle sizes shows that the high plateau values of particle sizes are maintained equivalently until each threshold temperature (Tth), followed by a prompt decrease above the Tth. A decrease in Tth by alleviating the core interactions and its composition dependence suggest that the more size-dispersed particles, the more susceptibility to chain exchange with increasing temperature. Our results on the formation of supramolecular dendron assemblies provide a guide to understand the core-interaction-dependent mesocrystal structures toward the fundamental principle underlying the temperature dependence of their particle sizes.
RESUMEN
To commercialize organic solar cells (OSCs), changes in the optimized morphology of the photoactive layer caused by external stimuli that cause degradation must be addressed. This work improves OSC stability by utilizing the cross-linking additive 1,8-dibromooctane (DBO) and a sequential deposition process (XSqD) to fabricate the photoactive layer. The cross-linking additive in the donor polymer (PTB7-Th) improves polymer crystallinity and immobilizes the crystalline morphology by partial photo-cross-linking. Ellipsometry experiments confirm the increase in the glass transition temperature of cross-linked PTB7-Th. The polymer crystallinity is further improved after removal of non-cross-linked polymer and residual additive by chlorobenzene. The cross-linked polymer layer forms an efficient and stable heterojunction with a nonfullerene acceptor (IEICO-4F) layer via an XSqD process. The OSC based on the immobilized PTB7-Th exhibits excellent stability against light soaking and thermal aging.
RESUMEN
In nature, water is vital for maintaining homeostasis. Particularly, organisms (e.g., plant leaf, bird feather) exploit water fluidics for motions. Hydration-adaptive crystallization is the representative water-responsive actuation of biopolymers. This crystallization has inspired the development of intelligent human-robot interfaces. At the same time, it hinders the consistent adhesion of tissue adhesive. As hydration-adaptive crystallization is inevitable, the on-demand control of crystallization is desirable in the innovative biopolymeric biomedical systems. To this end, this study developed an amino acid-based technology to artificially up- or down-regulate the inevitable crystallization of silk fibroin. A case II diffusion model was constructed, and it revealed that the activity of polar amino acid is related to crystallization kinetics. Furthermore, the water dynamics study suggested that active amino acid stabilizes crystallization-triggering water molecules. As a proof-of-concept, we verified that a 30% increase in the activity of serine resulted in a 50% decrease in the crystallization rate. Furthermore, the active amino acid-based suppression of hydration-adaptive crystallization enabled the silk fibroin to keep its robust adhesion (approximately 160 kJ m-3) by reducing the water-induced loss of adhesive force. The proposed silk fibroin was demonstrated as a stable tissue adhesive applied on ex vivo porcine mandible tissue. This amino acid-based regulation of hydration-adaptive crystallization will pioneer next-generation biopolymer-based healthcare.
Asunto(s)
Bombyx , Fibroínas , Adhesivos Tisulares , Humanos , Animales , Porcinos , Fibroínas/química , Agua/química , Bombyx/química , Aminoácidos , Serina , Seda/químicaRESUMEN
We present material substitutions and optical characterization of block copolymer (BCP)-templated gyroid structures that are obtained from a volume-asymmetric polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA). In addition to the structural analyses reported earlier, we elucidate the optical responses to the nonaffine gyroid planes, in which the PMMA channels are complexed with Al2O3 by sequential infiltration synthesis and the organic components are further eliminated to produce an inorganic air-Al2O3 gyroid film. Grazing-incidence small-angle X-ray scattering measurements show that three-dimensional gyroid lattices are retained in both in-plane and out-of-plane directions through these material substitution processes. Our BCP-templated gyroid films respond to the middle UV wavelength from 200 to 300 nm, and peculiar optical reflectance peaks correlate with the unforbidden {110} diffraction spots. Together with the red- and blue-shifts of the reflectance peaks by the component substitutions, the air-Al2O3 gyroid structure reveals the high-amplitude spectrum due to the large refractive-index difference between channel and matrix.