Increasing the Energy Gap between Band-Edge and Trap States Slows Down Picosecond Carrier Trapping in Highly Luminescent InP/ZnSe/ZnS Quantum Dots.

Non-toxic InP-based nanocrystals have been developed for promising candidates for commercial optoelectronic applications and they still require further improvement on photophysical properties, compared to Cd-based quantum dots (QDs), for better device efficiency and long-term stability. It is, therefore, essential to understand the precise mechanism of carrier trapping even in the state-of-the-art InP-based QD with near-unity luminescence. Here, it is shown that using time-resolved spectroscopic measurements of systematically size-controlled InP/ZnSe/ZnS core/shell/shell QDs with the quantum yield close to one, carrier trapping decreases with increasing the energy difference between band-edge and trap states, indicating that the process follows the energy gap law, well known in molecular photochemistry for nonradiative internal conversion between two electronic states. Similar to the molecular view of the energy gap law, it is found that the energy gap between the band-edge and trap states is closely associated with ZnSe phonons that assist carrier trapping into defects in highly luminescent InP/ZnSe/ZnS QDs. These findings represent a striking departure from the generally accepted view of carrier trapping mechanism in QDs in the Marcus normal region, providing a step forward understanding how excitons in nanocrystals interact with traps, and offering valuable guidance for making highly efficient and stable InP-based QDs.

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells.

In this study, composite films made of coiled carbon nanotubes (CCNTs) and poly(3,4-ethylenedioxythiophene) polymerized with poly(4-styrenesulfonate) (PEDOT:PSS) were fabricated with different composition ratios. The variations in film properties (including surface morphology, work function, and electrical conductivity) in accordance with the amount of CCNT dosing were investigated. Subsequently, through HCl-methanol treatment, we achieved a significant enhancement in electrical conductivity with little damage to the CCNT features. The characteristics of CCNT/PEDOT:PSS composite film are generally comparable to those of PEDOT:PSS film, and some of them, such as catalytic activity and work function, are significantly higher. On the basis of these versatile features, the CCNT/PEDOT:PSS composite films exhibit excellent performance as source/drain electrode in organic thin-film transistors and as catalytic counter electrode in dye-sensitized solar cells.

Correction: Direct characterization of graphene doping state by in situ photoemission spectroscopy with Ar gas cluster ion beam sputtering.

Correction for 'Direct characterization of graphene doping state by in situ photoemission spectroscopy with Ar gas cluster ion beam sputtering' by Dong-Jin Yun et al., Phys. Chem. Chem. Phys., 2018, 20, 615-622.

Direct characterization of graphene doping state by in situ photoemission spectroscopy with Ar gas cluster ion beam sputtering.

On the basis of an in situ photoemission spectroscopy (PES) system, we propose a novel, direct diagnosis method for the characterization of graphene (Gr) doping states at organic semiconductor (OSC)/electrode interfaces. Our in situ PES system enables ultraviolet/X-ray photoelectron spectroscopy (UPS/XPS) measurements during the OSC growth or removal process. We directly deposit C60 films on three different p-type dopants-gold chloride (AuCl3), (trifluoromethyl-sulfonyl)imide (TFSI), and nitric acid (HNO3). We periodically characterize the chemical/electronic state changes of the C60/Gr structures during their aging processes under ambient conditions. Depositing the OSC on the p-type doped Gr also prevents severe degradation of the electrical properties, with almost negligible transition over one month, while the p-type doped Gr without an OSC changes a lot following one month of aging. Our results indicate that the chemical/electronic structures of the Gr layer are completely reflected in the energy level alignments at the C60/Gr interfaces. Therefore, we strongly believe that the variation of energy level alignments at the OSC/graphene interface is a key standard for determining the doping state of graphene after a certain period of aging.

TCNQ Interlayers for Colloidal Quantum Dot Light-Emitting Diodes.

CdSe/CdS/ZnS quantum dot light-emitting diodes (QD-LEDs) show increased brightness (from ca. 18 000 to 27 000 cd m(-2) ) with 7,7,8,8-tetracyanoquinodimethane (TCNQ) between the QD and electron-transfer layers of ZnO nanoparticles. As QD/ZnO layers are known to have interface defects, our finding leads to the importance of interface engineering for QD-LEDs. Although the photoluminescent intensity and decay lifetime of ZnO/TCNQ/QD layers are similar to those of ZnO/QD layers, cyclic voltammetry suggests improved charge transfer of TCNQ/ZnO layers compared to that of pure ZnO layers. This helps us to understand the mechanism of electrically driven QD-LED behavior, which differs from that of conventional solid-state LEDs, and enables the rational design of QD-based optoelectronic devices.

Near-strain-free anode architecture enabled by interfacial diffusion creep for initial-anode-free quasi-solid-state batteries.

Anode-free (or lithium-metal-free) batteries with garnet-type solid-state electrolytes are considered a promising path in the development of safe and high-energy-density batteries. However, their practical implementation has been hindered by the internal strain that arises from the repeated plating and stripping of lithium metal at the interlayer between the solid electrolyte and negative electrode. Herein, we utilize the titanium nitrate nanotube architecture and a silver-carbon interlayer to mitigate the anisotropic stress caused by the recurring formation of lithium deposition layers during the cycling process. The mixed ionic-electronic conducting nature of the titanium nitrate nanotubes effectively accommodates the entry of reduced Li into its free volume space via interfacial diffusion creep, achieving near-strain-free operation with nearly tenfold volume suppressing capability compared to a conventional Cu anode counterpart during the lithiation process. Notably, the fabricated Li6.4La3Zr1.7Ta0.3O12 (LLZTO)-based initial-anode-free quasi-solid-state battery full cell, coupled with an ionic liquid catholyte infused high voltage LiNi0.33Co0.33Mn0.33O2-based cathode with an areal capacity of 3.2 mA cm-2, exhibits remarkable room temperature (25 °C) cyclability of over 600 cycles at 1 mA cm-2 with an average coulombic efficiency of 99.8%.

Operando Observation of the De-Evolution/Evolution Process of Hydrated LiOH in Moisture-Assisted Li-O2 Batteries.

All-solid-state Li-O2 batteries that use ceramic electrolytes have been suggested to overcome the limitations posed by the decomposition of organic electrolytes. However, these systems show a low discharge capacity and high overpotential because the discharge product Li2O2 has low electronic conductivity. In this study, all-solid-state planar-type Li-O2 cells were constructed using a lithium anode, a Li1·3Al0·3Ti1·7(PO4) (LATP) inorganic solid electrolyte, and an air electrode composed of a Pt grid pattern. The discharge/charge process was observed in real time in a humidified O2 environment for the first time, which clarified both the hydration process of the discharge products and the charging process of the hydrated discharge products. The discharge product (LiOH) could be easily hydrated in water, which would facilitate ion transport, thereby increasing the discharge capacity and discharge voltage (vs Li/Li+; from 2.96 to 3.4 V). Thus, Li-O2 cells with a high energy density and a capacity of 3600 mAh/gcathode were achieved using a planar Pt-patterned electrode in a humidified O2 environment. This study is the first to demonstrate the hydration of the discharge products of a Li-O2 cell in humidified O2. Based on a thorough understanding of the hydration phenomenon/mechanism, our findings suggest new strategies for developing high-energy-density all-solid-state Li-O2 batteries using a simple, easy-to-manufacture planar Pt-patterned cathode.

Unlocking the hidden chemical space in cubic-phase garnet solid electrolyte for efficient quasi-all-solid-state lithium batteries.

Garnet-type Li7La3Zr2O12 (LLZO) solid electrolytes (SE) demonstrates appealing ionic conductivity properties for all-solid-state lithium metal battery applications. However, LLZO (electro)chemical stability in contact with the lithium metal electrode is not satisfactory for developing practical batteries. To circumvent this issue, we report the preparation of various doped cubic-phase LLZO SEs without vacancy formation (i.e., Li = 7.0 such as Li7La3Zr0.5Hf0.5Sc0.5Nb0.5O12 and Li7La3Zr0.4Hf0.4Sn0.4Sc0.4Ta0.4O12). The entropy-driven synthetic approach allows access to hidden chemical space in cubic-phase garnet and enables lower solid-state synthesis temperature as the cubic-phase nucleation decreases from 750 to 400 °C. We demonstrate that the SEs with Li = 7.0 show better reduction stability against lithium metal compared to SE with low lithium contents and identical atomic species (i.e., Li = 6.6 such as Li6.6La3Zr0.4Hf0.4Sn0.4Sc0.2Ta0.6O12). Moreover, when a Li7La3Zr0.4Hf0.4Sn0.4Sc0.4Ta0.4O12 pellet is tested at 60 °C in coin cell configuration with a Li metal negative electrode, a LiNi1/3Co1/3Mn1/3O2-based positive electrode and an ionic liquid-based electrolyte at the cathode|SE interface, discharge capacity retention of about 92% is delivered after 700 cycles at 0.8 mA/cm2 and 60 °C.

Bevel Structure Based XPS Analysis as a Non-Destructive Chemical Probe for Complex Interfacial Structures of Organic Semiconductors.

The bevel structure of organic multilayers produced by finely controlled Ar gas cluster ion beam sputtering preserves both the molecular distribution and chemical states. Nevertheless, there is still an important question of whether this method can be applicable to organic multilayer structures composed of complex or ambiguous interfaces used in real organic optoelectronic devices. Herein, various bevel structures are fabricated from different types of organic semiconductors using a solution-based deposition technique: complicatedly intermixed electron-donor and electron-acceptor bulk heterojunction structure, thin film structure with an internal donor-acceptor concentration gradient, and multi-layered structure with more than three layers. For these organic material combinations listed above, the bevel structure is fabricated with finely tuned Ar gas cluster ion beam sputtering. The location-dependent X-ray photoelectron spectroscopy (XPS) results obtained for each bevel structure exactly correspond to the XPS depth profiles. This result demonstrates that the bevel structure analysis is a powerful method to distinguish subtle differences in chemical component distributions and chemical states of organic semiconductors even with complex or ambiguous interfaces. Ultimately, due to its reliability as verified by this study, the proposed bevel structure analysis is expected to greatly expand other analytical techniques with a limited spatial or depth resolution.

Silver Nanowire Network Hybridized with Silver Nanoparticle-Anchored Ruthenium Oxide Nanosheets for Foldable Transparent Conductive Electrodes.

Facile strategies in flexible transparent conductive electrode materials that can sustain their electrical conductivities under 1 mm-scale radius of curvature are required for wider applications such as foldable devices. We propose a rational design as well as a fabrication process for a silver nanowire-based transparent conductive electrode with low sheet resistance and high transmittance even after prolonged cyclic bending. The electrode is fabricated on a poly(ethylene terephthalate) film through the hybridization of silver nanowires with silver nanoparticles-anchored RuO2 nanosheets. This hybridization significantly improves the performance of the silver nanowire network under severe bending strain and creates an electrically percolative structure between silver nanowires and RuO2 nanosheets in the presence of anchored silver nanoparticles on the surface of RuO2 nanosheets. The resistance change of this hybrid transparent conductive electrode is 8.8% after 200,000 bending cycles at a curvature radius of 1 mm, making it feasible for use in foldable devices.

Modification of Au nanoparticles dispersed on carbon support using spontaneous deposition of Pt toward formic acid oxidation.

This work presents formic acid oxidation on Pt deposits on Au nanoparticles dispersed on Vulcan XC-72R. The Pt deposits were produced using spontaneous deposition method contacting the Au nanoparticles with solutions containing Pt complex ions in various concentrations. The Pt deposits were characterized using CO stripping coulometry, X-ray photoelectron spectroscopy, and inductively coupled plasma atomic emission spectroscopy. When the Pt concentration is 10(-5)-10(-4) M, the Pt deposits are nanoislands of monatomic height. In the concentration range of 10(-4)-10(-3) M, the Pt deposits are most likely two-layer-thick nanofeatures. As Pt concentration increases further, the deposits become wider and thicker. Voltammetric behavior of Pt deposits reveals that on Pt deposits, dehydrogenation path is activated at the expense of poison-forming dehydration path. Furthermore, chronoamperometric measurement of the catalytic activity of Pt deposits supports that the two-layer-thick Pt deposits are most efficient in formic acid oxidation among the studied Pt deposits on Au nanoparticles. The enhancement factor of the particular Pt deposits is 2 in terms of turnover frequency, compared with a commercial Pt catalyst. Details are discussed in conjunction with Pt deposits on Au(111).

Electrocatalytic activity of Pd-Co bimetallic mixtures for formic acid oxidation studied by scanning electrochemical microscopy.

The electrochemical oxidation of formic acid was studied by the tip generation-substrate collection (TG-SC) mode of scanning electrochemical microscopy (SECM), extending the number of applications of SECM in electrocatalysis. Formic acid was generated at a Hg on Au ultramicroelectrode (UME) tip by reduction of CO(2) in a 0.1 M KHCO(3) solution saturated with this gas. The electrocatalytic activity of different Pd-Co bimetallic compositions was evaluated using a Pd-Co electrocatalyst array formed by spots deposited onto glassy carbon (GC) as a SECM substrate. The SECM tip, which generated a constant formic acid flux, was scanned above the array and the oxidation current generated when formic acid was collected by active electrocatalytic spots was displayed as a function of tip position. This generated a SECM image that showed the electrocatalytic activity of each spot. SECM screening identified Pd(50)Co(50) (Pd/Co = 50:50, atomic ratio) as a better electrocatalyst toward the formic acid oxidation than pure Pd or Pt in 0.1 M KHCO(3) solution and this result was confirmed by cyclic voltammetry. Positive feedback was observed for the most active compositions of Pd-Co which suggests fast reaction kinetics and chemical reversibility during the oxidation of formic acid to CO(2). Moreover this feedback increases the contrast between active and non-active spots in this imaging mode.

Revisiting Primary Particles in Layered Lithium Transition-Metal Oxides and Their Impact on Structural Degradation.

Layered lithium transition-metal oxide materials, e.g., Li(Ni1- x - y Co x Mn y )O2 (NCM) and Li(Ni1- x - y Co x Al y )O2, are the most promising candidates for lithium-ion battery cathodes. They generally consist of ≈10 µm spherical particles densely packed with smaller particles (0.1-1 µm), called secondary and primary particles, respectively. The micrometer- to nanometer-sized particles are critical to the battery performance because they affect the reaction capability of the cathode. Herein, the crystal structure of the primary particles of NCM materials is revisited. Elaborate transmission electron microscopy investigations reveal that the so-called primary particles, often considered as single crystals, are in fact polycrystalline secondary particles. They contain low-angle and exceptionally stable special grain boundaries (GBs) presumably created during aggregation via an oriented attachment mechanism. Therefore, this so-called primary particle is renamed as primary-like particle. More importantly, the low-angle GBs between the smaller true primary particles cause the development of nanocracks within the primary-like particles of Ni-rich NCM cathodes after repetitive electrochemical cycles. In addition to rectifying a prevalent misconception about primary particles, this study provides a previously unknown but important origin of structural degradation in Ni-rich layered cathodes.

Relationship between particulate matter measured by optical particle counter and mortality in Seoul, Korea, during 2001.

This study was performed to examine the relationship between particulate matter exposure and mortality in Seoul, Korea, during the year 2001. Particulate matter data were collected using an optical particle counter (OPC) and national monitoring stations in Seoul. The size-resolved aerosol number concentrations of particles 0.3-25 microm in diameter and mass concentrations of PM10 (particulate matter less than 10 microm in diameter) and PM2.5 (less than 2.5 microm in diameter) were measured. Meteorological data such as air temperature and relative humidity were provided by the Korea Meteorological Administration. Daily mortality was analyzed using a generalized additive Poisson model, with adjustment for the effects of seasonal trend, air temperature, humidity, and day of the week as confounders, in a nonparametric approach. We used S-Plus for all analyses. Model fitness, using loess smoothing, was based on stringent convergence criteria to minimize the default convergence criteria in the S-Plus generalized additive models module. The IQR (interquartile range) increase of fine particle (10.21 number/cm3 [the total number of particles per cubic centimeter]) and respiratory particle (10.38 number/cm3) number concentration were associated with a 5.73% (5.03%-6.45%) and a 5.82% (5.13%-6.53%) increase in respiratory disease-associated mortality, respectively. Mortality effects in the elderly (aged over 65 years) were increased by more than 0.51% to 2.59%, and the relative risks of respiratory-related and cardiovascular-related mortality were increased by 0.51% to 1.06% compared with all-cause mortality. These findings support the hypothesis that air pollution is harmful to sensitive subjects, such as the elderly, and has a greater effect on respiratory- and cardiovascular-related mortality than all-cause mortality. However, our results using OPC data did not support the hypothesis that PM2.5 would have more adverse health effects than PM10 in number concentration but not in mass concentration.

High-Performance and Industrially Feasible Ni-Rich Layered Cathode Materials by Integrating Coherent Interphase.

For developing the industrially feasible Ni-rich layered oxide cathode with extended cycle life, it is necessary to mitigate both the mechanical degradation due to intergranular cracking between primary particles and gas generation from the reaction between the electrolyte and residual Li in the cathode. To simultaneously resolve these two issues, we herein propose a simple but novel method to reinforce the primary particles in LiNi0.91Co0.06Mn0.03O2 by providing a Li-reactive material, whose spinel interphase is coherent with the surface of the cathode. The modified structure significantly outperforms analogous bare samples: they conserve more than 90% of the initial capacity after 50 cycles and also exhibit a greater rate capability. By tracking the same particle location during cycling, we confirmed that the current method significantly reduces crack generation because the provided coating material can penetrate inside the grain boundary of the secondary particle and help maintain the volume of the primary particle. Finally, first-principles calculations were implemented to determine the role of this spinel material, i.e., having intrinsically isotropic lattice parameters, superior mechanical properties, and only a small volume change during delithiation. We believe that the proposed method is straightforward and cost-effective; hence, it is directly applicable for the mass production of Ni-rich cathode material to enable its commercialization.

Adlayers of Sb irreversibly adsorbed on Pt(111): an electrochemical scanning tunneling microscopy study.

This work presents an electrochemical scanning tunneling microscopy study of Sb irreversibly adsorbed on Pt(111) at various potentials. At an open circuit potential (0.46 V vs a Ag/AgCl electrode), well-ordered structures of SbO+ were found: four (4 x 3)-3SbO+ structures and one (2 square root(3) x 2 square root(3))R30 degrees-3SbO+ structure. In addition, several unidentifiable transient structures of SbO+ were observed, and their relations to the well-ordered structures of (4 x 3) and (2 square root(3) x 2 square root(3))R30 degrees, regarding structural evolution, were proposed. At a reducing potential (0 V), the Pt(111) surface was covered with irreversibly adsorbed Sb which consisted of three different domains: protruded domain, domain of uniaxially incommensurate (square root(3) x square root(2))-Sb, and domain of bare (1 x 1) Pt(111). During oxidation of elemental Sb at 0.30 V, the Sb domains of the (square root(3) x square root(2)) structure were oxidized, while the protruded domains were not oxidized. After underpotential deposition of additional Sb onto the Pt(111) covered with irreversibly adsorbed Sb, the whole surface was filled with the Sb domains where each Sb atoms were separated by the square root(2a) distance (a = one Pt-Pt distance, 0.277 nm). The observed electrochemical inactivity below 0.3 V was discussed in terms of the protruded domain of a presumable incommensurate (square root(2) x square root(2)) structure.

Atomic arrangements inside Ru and Os nanoislands spontaneously deposited on Pt(111).

The atomic arrangements inside Ru and Os nanoislands spontaneously deposited on Pt(111) electrode surface were observed with electrochemical scanning tunneling microscopy. The surperlattice of the pristine Ru nanodeposits is (square root of 3 x square root of 3)R30 degrees -RuO+. Upon reduction, the Ru nanodeposits are compressed to a uniaxially incommensurate (square root of 3 x square root of 2)R30 degrees -Ru structure, which does not change during the following reoxidation. The atomic arrangement inside the pristine Os nanodeposits is an incommensurate (square root of 2 x square root of 2)-OsO+ structure, which does not transform during the subsequent reduction-oxidation cycles. The structures of the Ru and Os nanodeposits are discussed in terms of removal and insertion of oxygen ions depending on electrode potential.

Electrochemical STM observation of new structures of CO adsorbed on a Pt(111) electrode surface.

Presented are two newly observed adstructures of adsorbed CO onto Pt(111), (2 x 2)-3CO-beta and (2 x 2)-4CO, observed during the structural evolution from the well-known (2 x 2)-3CO-alpha structure to the (square root 19 x square root 19)-13CO structure.

Silicon/Carbon Nanotube/BaTiO3 Nanocomposite Anode: Evidence for Enhanced Lithium-Ion Mobility Induced by the Local Piezoelectric Potential.

We report on the synergetic effects of silicon (Si) and BaTiO3 (BTO) for applications as the anode of Li-ion batteries. The large expansion of Si during lithiation was exploited as an energy source via piezoelectric BTO nanoparticles. Si and BTO nanoparticles were dispersed in a matrix consisting of multiwalled carbon nanotubes (CNTs) using a high-energy ball-milling process. The mechanical stress resulting from the expansion of Si was transferred via the CNT matrix to the BTO, which can be poled, so that a piezoelectric potential is generated. We found that this local piezoelectric potential can improve the electrochemical performance of the Si/CNT/BTO nanocomposite anodes. Experimental measurements and simulation results support the increased mobility of Li-ions due to the local piezoelectric potential.

Atomic rearrangements during the electrochemical treatments of Au(111) covered with irreversibly adsorbed Sb.

A morphological variation of Au(111) covered with irreversibly adsorbed Sb was investigated with cyclic voltammetry and EC-STM. At open circuit potential (approximately 0.0 V vs a Ag/AgCl reference electrode), the oxygenated Sb layers were formed as an island on the wide terraces and a terrace at the step edges of Au(111). The ultimate morphology at the open circuit potential was a network adlayer with a (radical3 x radical3)R30 degrees atomic arrangement. When the oxygenated layer was reduced, the adsorption features, such as the island, shrunk or disappeared depending on their sizes. This modification was interpreted in terms of an alloy formation of Sb and Au. All of the Sb atoms, however, were not involved in the alloy formation, although the alloyed and unalloyed domains showed (radical3 x radical3)R30 degrees atomic structures with different brightness in EC-STM images. During oxidation of the reduced Sb layers, the alloyed and unalloyed domains of Sb behaved in a different way: the alloyed Sb was stripped to a soluble species to leave pits, while the unalloyed Sb became an oxygenated adspecies, which desorbed very slowly. A long oxidation led to a Au(111) covered with pits and islands of (1 x 1) without any adsorbed Sb.