RESUMEN
In the context of green and low-carbon development, energy saving, and emission reduction, hot recycling technology (RT) has been researched, which is divided into hot central plant RT and hot in-place RT. However, due to the aged asphalt binders, the shortcomings of hot recycled asphalt mixtures have become apparent, as in comparison to new asphalt mixtures, their resistance to cracking was inferior and the cracking resistance deteriorated more rapidly. Therefore, it was very necessary to focus on the improvement of crack resistance of hot recycled asphalt mixtures. Basalt fiber has been proved to be able to effectively improve the comprehensive road performance of new asphalt mixtures. Therefore, this paper introduced basalt fiber to hot central plant recycled and hot in-place recycled asphalt mixtures, in order to improve the crack resistance of asphalt as a new type of fiber stabilizer. Firstly, six types of SMA-13 fiber asphalt mixtures were designed and prepared, i.e., hot mixtures with basalt fiber or lignin fiber, hot central plant recycled mixtures with basalt fiber or lignin fiber, and hot in-place recycled mixtures with basalt fiber or lignin fiber. Secondly, the trabecular bending test, low-temperature creep test, semi-circular bending test, and IDEAL-CT were used to comparatively study the changing patterns of low and intermediate temperature cracking resistance of hot recycled mixtures with conventional lignin fibers or basalt fibers. Finally, Pearson's correlation coefficient was used to analyze the correlation of the different cracking resistance indicators. The results show that the low and intermediate temperature cracking resistance of hot central plant recycled mixtures increased by 45.6% (dissipative energy ratio, Wd/Ws) and 74.8% (flexibility index, FI), respectively. And the corresponding cracking resistance of hot in-place recycled mixture increased by 105.4% (Wd/Ws) and 55.7% (FI). The trabecular bending test was more suitable for testing the low-temperature cracking resistance of hot recycled asphalt mixtures, while the IDEAL-CT was more suitable for testing the intermediate-temperature cracking resistance. The results can provide useful references for the utilization of basalt fiber in the hot recycling of SMA-13 asphalt mixtures.
RESUMEN
Reflection cracks are one of the most common problems in semi-rigid base pavement. Setting a stress absorption layer can effectively delay the occurrence of reflection cracks, but further improvement is still needed in its interlayer bonding performance and anti-reflection crack performance. Considering the excellent crack resistance of basalt fibers and the good elastic recovery ability of rubber asphalt, it is considered worthwhile to incorporate them into traditional stress absorption layers to improve performance. To simulate the actual pavement layer effect, composite specimens consisting of a cement-stabilized macadam base + basalt fiber rubber asphalt stress-absorbing layer + AC-20 asphalt mixture surface layer were prepared to evaluate their performance through interlayer direct shear tests, interlayer tensile tests, three-point bending tests, and overlay tests (OTs). To determine the optimal fiber blending combination, four fiber lengths (3 cm, 6 cm, 9 cm, 12 cm) and four fiber proportions (120 g/m2, 140 g/m2, 160 g/m2, 180 g/m2) were selected respectively. The specific effects of basalt fibers with different lengths and dosages were analyzed. The results show that compared with the absence of fibers, the improvement of interlayer bonding performance of rubber asphalt with basalt fibers is not significant, and it has certain limitations; however, the improvement of anti-reflective crack performance is significant, with an increase of up to 305.5%. This indicates that the network structure formed by basalt fibers and rubber asphalt stress absorption layer can effectively absorb and disperse external loads, causing an excellent crack resistance effect. Meanwhile, the results indicate that the main factor affecting its interlayer bonding strength and anti-reflective crack performance is the fiber content. Based on the comprehensive analysis of the performance and economy of the stress absorption layer of basalt fiber rubber asphalt, the optimal fiber parameter combination recommended is as fiber length 9 cm and fiber content 160 g/m2. These results can provide a reference for the design and performance evaluation of basalt fiber rubber asphalt stress absorption layer, and have certain application value.
RESUMEN
Ultra High-Performance Concrete (UHPC) is a cement-based composite material with great strength and durability. Fibers can effectively increase the ductility, strength, and fracture energy of UHPC. This work describes the impacts of individual or hybrid doping of basalt fiber (BF) and steel fiber (SF) on the mechanical properties and microstructure of UHPC. We found that under individual doping, the effect of BF on fluidity was stronger than that of SF. Moreover, the compressive, flexural, and splitting tensile strength of UHPC first increased and then decreased with increasing BF dosage. The optimal dosage of BF was 1%. At a low content of fiber, UHPC reinforced by BF demonstrated greater flexural strength than that reinforced by SF. SF significantly improved the toughness of UHPC. However, a high SF dosage did not increase the strength of UHPC and reduced the splitting tensile strength. Secondly, under hybrid doping, BF was partially substituted for SF to improve the mechanical properties of hybrid fiber UHPC. Consequently, when the BF replacement rate increased, the compressive strength of UHPC gradually decreased; on the other hand, there was an initial increase in the fracture energy, splitting tensile strength, and flexural strength. The ideal mixture was 0.5% BF + 1.5% SF. The fluidity of UHPC with 1.5% BF + 0.5% SF became the lowest with a constant total volume of 2%. The microstructure of hydration products in the hybrid fiber UHPC became denser, whereas the interface of the fiber matrix improved.
RESUMEN
A new type of plastic and basalt fiber composite (PB) modifier, which is composed of waste plastic and basalt fiber using a specific process, was used for bus lanes to address severe high-temperature deformation diseases due to the heavy loads of buses. The dense gradations of asphalt mixture with a nominal maximum aggregate size of 13.2 mm (AC-13) and 19 mm (AC-20) were selected to fabricate asphalt mixtures. The impact of the modifier PB on the high-temperature rutting resistance, low-temperature crack resistance, and water damage resistance was investigated experimentally. The experimental results showed that adding the modifier PB could enhance the rutting resistance and water damage resistance of asphalt mixtures significantly while maintaining the low-temperature crack resistance. Then, PB-modified asphalt mixtures of AC-13 and AC-20 were employed into a typical pavement structure of a bus lane in Yangzhou city, China, and three types of designed pavement structures were proposed. On this basis, statics analyses of all of the designed structures were performed using the finite element method. The statics analyses revealed that, compared with the standard axle load, the actual over-loaded axle made the pavement structure of the bus lane suffer a 30% higher stress and vertical deformation, leading to accelerated rutting damage on the bus lanes. The addition of the modifier PB could make the pavement structure stronger and compensate for the negative effect caused by the heavy axle load. These findings can be used as a reference for the pavement design of urban bus lanes.
RESUMEN
The expansion of urban construction areas can reduce the infiltration rate of rainwater in permeable land, and a large amount of runoff rainwater cannot penetrate the soil. In extreme rainstorm weather, it is easy to cause serious urban waterlogging problems. To improve the infiltration and decontamination ability of green space soil, two types of inorganic ameliorants (i.e., sand and grain shell) and structural ameliorants (i.e., desulfurization gypsum and polyacrylamide) were utilized as amendments in the soil. The influence of the selected ameliorants on the infiltration and decontamination ability was analyzed through a soil infiltration test, soil pore distribution determination and a soil decontamination test. Three parameters including the soil infiltration rate, pore distribution characteristics and pollutant removal rate were proposed. The results showed that sand, grain shells and desulfurization gypsum (FGD gypsum) all enhanced the infiltration capacity of soil, while PAM decreased the infiltration capacity. Meanwhile, mixed sand and grain shell with the FGD gypsum and polyacrylamide can effectively improve the decontamination capacity of the soil. Comprehensive analysis showed that the better improvement combination is 10% sand + 20% grain hull + 0.5 g/kg FGD gypsum + 0.1 g/kg PAM.
RESUMEN
In this study, basalt fiber having two types of diameters (16 µm and 25 µm) was selected and added to asphalt mastic and asphalt mixtures using different fiber proportions. The influences of fiber diameters and proportions on the properties of asphalt mastic and mixtures were studied. The adhesion behavior of the fiber-asphalt mastic (FAM) interface was evaluated by a monofilament pullout test, and the rheological properties of FAM were evaluated by temperature sweep, linear amplitude sweep, and bending beam rheological tests. In addition, the high-temperature stability, intermediate and low-temperature cracking resistance, and water stability of fiber-modified mixtures were studied by wheel tracking, ideal cracking, a low-temperature bending beam, and a water-immersed Marshall test. The results showed that the interface adhesion behavior between 16 µm fiber and asphalt mastic was more likely in the fiber failure mode at both -12 °C and 25 °C. Adding basalt fiber can significantly improve the high-temperature and fatigue properties of asphalt mastics. Moreover, 16 µm fiber had a better modifying effect on asphalt mastic than 25 µm fiber. The same enhancement trend can be observed in asphalt mixtures. Basalt fibers with 16 µm diameters can improve the high-temperature performance of asphalt mixtures more significantly. In addition, 16 µm fiber could sharply enhance the cracking performance of the mixtures at intermediate and low temperatures, while the enhancing effect of 25 µm fiber on the mixture is insignificant, though both diameters of the fibers have a minor effect on the water stability.
RESUMEN
Many researchers use fiber to improve the cracking resistance of asphalt mixtures, but research concerning the effects of fiber on fracture behavior is limited. The fracture behavior of asphalt mixtures with various fiber types (basalt fiber, glass fiber, and polyester fiber) and contents (0.1%, 0.2%, 0.3%, 0.4%, and 0.5%) has been studied using the indirect tensile asphalt cracking test (IDEAL-CT) in conjunction with digital image correlation (DIC) technology. The evaluation indexes used in the test included crack initiation energy (Gif), crack energy (Gf), splitting tensile strength (RT), cracking tolerance index (CTindex), and the real-time tensile strain (Exx) obtained using digital image correlation technology. The results showed that despite the fiber type, the increase of fiber content resulted in first, an increase, and then, a decrease of the cracking resistance of asphalt mixtures, indicating the presence of optimum fiber content-specifically, 0.4%, 0.3%, and 0.3% for basalt fiber, glass fiber, and polyester fiber, respectively. The development of real-time tensile strain, obtained based on digital image correlation technology, could be divided into two stages: slow-growth stage and rapid-expansion stage. In addition, asphalt mixture with basalt fiber presented the best cracking resistance at both the slow-growth and rapid-expansion stages. This research is helpful in understanding the effects of fiber type and content on the fracture behavior of asphalt mixtures and has certain reference significance for the application of fiber in asphalt mixtures.
RESUMEN
Reclaimed asphalt pavement (RAP) has been widely utilized because it is an environmentally friendly and economical material. The performance of recycled asphalt mixtures will deteriorate gradually with the secondary aging process of asphalt, including the self-healing property. To further understand the self-healing characteristics of asphalt after secondary aging, taking 70# petroleum asphalt, SBS-modified asphalt, and extracted old asphalt mastics as objects, the fatigue self-healing test and fracture self-healing test were conducted to simulate the intermediate-and low-temperature healing behaviors of different asphalt mastics. The impact of healing time, healing temperature, and aging degree of mastics on the healing performance was systematically investigated. The results show that the original unaged asphalt mastics present excellent fatigue healing properties with an index of 0.796 and 0.888 for 70# petroleum and SBS-modified asphalt mastics, respectively. The secondary aging process causes significant impact on the healing properties, leading to a great drop in the corresponding index, which decreased to 47.5% and 72.5% of that of the unaged ones. The fracture healing ability of all mastics was much inferior to the fatigue healing. After secondary aging, the fracture healing index values of 70# petroleum asphalt, SBS-modified asphalt, and extracted old asphalt mastics were all as low as around 0.3, indicating similar performance can be found in the secondary aged SBS-modified asphalt mastics and 70# asphalt mastics. Overall, after secondary aging, the fatigue damage of SBS-modified asphalt mastics can be cured effectively by self-healing, but the fatigue and fracture self-healing properties of 70# asphalt mastics are difficult to recover. These results could provide an innovative view to understand the fatigue and fracture healing characteristics of recycled asphalt pavement after secondary aging.
RESUMEN
The copolymer ethylene-octene (POE) has good aging resistance and is an inexpensive asphalt additive compared to the styrene-butadiene-styrene copolymer (SBS). However, POE is easy to segregate in asphalt during storage at high temperatures. Grafting glycidyl methacrylate (GMA) onto the molecular backbone of POE (i.e., POE-g-GMA) may solve this problem, for the epoxy groups in GMA can react with the active groups in asphalt. Asphalt modified with linear and crosslinked POE-g-GMA were prepared, and the hot storage stability, physical properties and thermal oxidation aging properties were discussed in detail. The results show that linear and low-degree crosslinked POE-g-GMA-modified asphalts are storage-stable at high temperatures via measurements of the difference in softening points and small-angle X-ray scattering (SAXS) characterizations from macro and micro perspectives. The difference in softening points (ΔSP) between the upper and lower ends is no more than 3.5 °C for modified asphalts after 48 h of being in an oven at 163 °C. More importantly, the crosslinking modification of POE-g-GMA can further increase the softening point and reduce the penetration as well as rheological properties via conventional physical property, dynamic shear rheometer (DSR) and multiple-stress creep recovery (MSCR) tests. Furthermore, asphalt modified with crosslinked POE-g-GMA reveals better aging resistance via measurements of the performance retention rate and electron paramagnetic resonance (EPR) characterizations after a rolling thin film oven test (RTFOT). This work may provide further guidelines for the application of polymers in asphalt.
RESUMEN
This paper conducts a thorough review of the literature on the feasibility and current state-of-the-art incorporation of basalt fiber (BF) into asphalt pavement materials, focusing on fiber characteristics, dosage, incorporation methods, mixture properties, and surface modification techniques. The optimum basalt fiber dosage should be determined based on engineering performance parameters such as asphalt type, fatigue cracking, thermal cracking, rutting, and moisture resistance of asphalt mixtures. Basalt fibers are added to asphalt mixes by dry method or mixed method to achieve better dispersion. Adding BF to asphalt mixtures increased performance characteristics like cracking resistance, rutting resistance, and fatigue resistance. Overall, incorporating BF into asphalt mixtures would lower costs while increasing pavement service life. More research is needed to fully understand the effects of different sizes of BF on pavement performance and the possible environmental and economic repercussions of fiber surface alteration.
RESUMEN
Non-renewable resources such as natural stone and asphalt are in short supply. Recycling technology, with its lower cost, has been used as the primary approach to asphalt pavement maintenance engineering. The inclusion of reclaimed asphalt pavement materials in producing new asphalt pavements may increase the risk of cracking. The strength and toughness of the asphalt mixture can be reduced. In this study, Hamburg wheel tracking tests (HWTT) were performed on rejuvenated asphalt mixtures with distinct maintenance processes. Different kinds of fibers have been used as additives to reinforce the rejuvenated asphalt mixtures. The HWTT rutting curve was identified as having three stages, including the post-compaction stage, the creep stage, and the stripping stage. The three-stage rutting curve model was used to determine the intersection point between the creep stage and stripping stage. The other two feature points (i.e., the post-compaction point and the stripping inflection point) were redefined with a new calculation method. Then, the rutting effect and stripping effect were separated with these feature points. The performance and economic benefits of fiber-reinforced rejuvenated asphalt mixtures were investigated through grey correlation analysis under the three maintenance processes. The feature points of the HWTT curve and the cost of the corresponding maintenance process were selected as the impact factors. Finally, the optimal scheme was developed by analyzing the influence of each factor on both performance and economic benefits.
RESUMEN
The inferior property is usually one of the major problems of recycled coarse aggregate (RCA), and the utilization of the RCA is limited. Strengthening the RCA is being widely explored. Immersing the RCA in the cement-based slurry is an effective approach. However, lots of slurry and time are required, and it is difficult to integrate the immersing method into the production line of the RCA. In this paper, a circular spraying method was proposed to treat the RCA using cement-based slurry. The immersing method was also conducted to verify the feasibility of the spraying method. The crushing value (CV), 24 h water absorption (WA), apparent density (AD) and dynamic water absorption (DWA) were tested, and the micro-morphology was also observed to explore the strengthening mechanism. Results showed that the CV and the WA decreased by up to 30.0% and 14.3% when the spraying method was used. The AD was slightly influenced by the cement-based slurry regardless of the treatment method. Considering the CV, WA and AD, the comprehensive grade of the RCA could be enhanced from III to II by using the spraying method. It was worth noting that the effects of the spraying method and the immersing method were basically equivalent. When the spraying method was adopted, only about 1 min and a small amount of slurry (about 5% of the RCA mass) were required to treat the RCA.
RESUMEN
This paper aims to better analyze the crack resistance of lignin fiber reinforced SMA-13 (LFSMA-13) asphalt mixtures, with and without polymer anti-rut agent (ARA), under different aging degrees. IDEAL-CT test and Fourier transform infrared (FTIR) spectroscopy were utilized to analyze the relationships between the crack resistance of LFSMA-13, with and without ARA, and the parameters of the FTIR spectrum of the asphalt extracted from the test samples. A convenient testing method to predict the anti-crack ability of the mixtures in a road was also derived in this study. The test samples were prepared using the specifications listed by AASHTO. The fracture formation work (Winitial) and cracking index (CTIndex) in the IDEAL-CT test were adopted to reflect the cracking ability of the asphalt mixtures in both the crack formation stage and the crack propagation stage. The peak areas of the FTIR spectrum were utilized to reveal the chemical properties of the asphalt material inside the SMA-13 asphalt mixtures, with and without ARA under different aging degrees. Grey correlation analysis was adopted to choose the most suitable FTIR spectrum parameters to derive the prediction models of Winitial and CTIndex under different aging degrees. After conducting a series of tests, the results showed that the aging process could well affect the crack resistance of the test samples and the peak areas of the asphalt extracted from the mixtures. The FTIR parameters selected from the grey correlation analysis could be used to well predict the anti-crack ability of the asphalt mixtures.
RESUMEN
To evaluate the long-term performances of different polymer-modified asphalt mixtures, three modifiers were chosen to modify AC-13 (defined as the asphalt concrete with the aggregate nominal maximum particle size of 13.2 mm); namely, high viscosity modifier (HVM), high modulus modifier (HMM), and anti-rutting agent (ARA). The deformation and cracking resistance of different polymer-modified mixtures were checked at different aging conditions (unaged, short-term aged, and long-term aged for 5, 10, and 15 days respectively). The results of the Hamburg wheel-track test and uniaxial penetration test (UPT) showed that the rutting resistance of all asphalt mixtures changed in a V-shape as the aging progressed. From the unaged stage to the long-term aging stage (5 days), the rutting resistance decreases gradually. While after the long-term aging stage (5 days), the rutting resistance increases gradually. Results from the semicircular bending test (SCB) and the indirect tensile asphalt cracking test (IDEAL-CT) indicated that the cracking resistance of all the mixtures gradually decline with the deepening of the aging degree, indicating that aging weakens the crack resistance of asphalt mixtures. Additionally, test results showed that the rutting resistance of ARA AC-13 (defined as AC-13 containing ARA) is the best, the cracking resistances of ARA AC-13, HMM AC-13 (defined as AC-13 containing HMM) and HVM AC-13 (defined as AC-13 containing HVM) have no significant difference, and different polymer modifiers had different sensitivities to aging due to the polymer content and the type of modifier. The conclusions of this study help to further understand the long-term performance of polymer-modified asphalt mixtures during service life and to help guide the selection of modifiers for mixtures.
RESUMEN
Incorporating reclaimed asphalt pavement (RAP) into asphalt mixtures achieves astonishingly environmental and economic benefits. However, there is hesitation to use higher RAP content due to the concern regarding the deterioration in pavement performance, especially the cracking resistance. Basalt fiber has been considered an effective additive to reinforce the performance of asphalt mixtures and, subsequently, the reinforcement effect is also expected for high-RAP content mixtures. Therefore, this study investigated the effect of basalt fiber on the pavement performance of asphalt mixtures with 0%, 30%, 40%, and 50% RAP contents against high-temperature performance, moisture susceptibility, low-temperature and intermediate-temperature cracking resistance, based on the wheel-tracking test, the uniaxial penetration test, the freeze-thaw splitting test, the low-temperature bending beam test, the semicircular bend fracture test and the indirect tensile asphalt cracking test, respectively. In addition, a performance-space diagram was developed to determine the mixture performance shift caused by basalt fiber. The results showed that adding basalt fiber compensated for the detrimental effect caused by RAP, leading to significant enhancement in moisture susceptibility and low- and intermediate-temperature cracking resistance of mixtures with high RAP content, along with the enhancement in high-temperature performance, indicating that basalt fiber can contribute to the use of high RAP content.
RESUMEN
Fiber length is a key parameter for the mixture design of basalt fiber-reinforced hot mix asphalt (HMA), which significantly affects the mix performance. To evaluate the suitability of fiber lengths for HMA with different nominal maximum aggregate size (NMAS), basalt fiber with the lengths of 3, 6, 9, 12, and 15 mm were selected for dense graded gradations with different NMASs (namely, SUP-13, SUP-20, and SUP-25), so as to prepare the fiber-reinforced HMA mixtures. Then, the mix performance was evaluated by an indirect tensile asphalt cracking test (IDEAL-CT), a four-point bending beam fatigue test, a wheel tracking test, a uniaxial penetration test, a low temperature bending beam test, and a freeze-thaw splitting test. Based on the performance results, the optimum fiber length for each mix gradation was proposed by the normalization method. The results showed that adding basalt fiber can enhance the comprehensive performance of all three types of HMA to a great extent. Furthermore, fiber length presented remarkable impact on the crack resistance, the fatigue resistance of the HMA, and the low temperature crack resistance, but it had limited influence on the high temperature deformation resistance, and water stability. The optimum fiber length for SUP-13, SUP-20, and SUP-25 was 6, 9, and 12 mm, respectively.
RESUMEN
This paper aims to clarify the shear deformation behavior of double-layer asphalt mixtures using the virtual uniaxial penetration test (UPT) with a discrete element method. For this purpose, asphalt mixtures with two different nominal maximum aggregate sizes were designed for the preparation of double-layer wheel tracking test specimens. Then, the cylindrical cores were prepared from the specimens and were cut for capturing the longitudinal profile images. These images were used to reconstruct a two-dimensional discrete element model (DEM) of the uniaxial penetration test specimen. The results indicate that the shear deformation behavior of the asphalt mixtures showed corresponding changes under the virtual loading. The tensile and compressive stress were distributed unevenly within the upper layer after the test, and both coarse aggregates and asphalt mortars bore a greater shear stress. Therefore, cracks were more likely to occur in the upper layer, leading to the failure of the specimens. This process enhanced the bonding between the asphalt mortars and the mineral aggregates. The aggregate particles in the upper layer moved more vertically, while those in the lower layer generally moved more laterally under the virtual loading. This behavior reveals the rutting mechanism of asphalt pavement.