Rapid In-Plane Pattern Growth for Large-Area Inverse Replication Through Electrohydrodynamic Instability of Polymer Films.

Nanopatterning driven by electrohydrodynamic (EHD) instability can aid in the resolution of the drawbacks inherent in conventional imprinting or other molding methods. This is because EHD force negates the requirement of physical contact and is easily tuned. However, its potential has not examined owing to the limited size of the pattern replica (several to tens of micrometers). Thus, this study proposes a new route for large-area patterning through high-speed evolution of EHD-driven pattern growth along the in-plane axis. Through the acceleration of the in-plane growth, while selectively controlling a specific edge growth, the pattern replica area can be extended from the micro- to centimeter scale with high fidelity. Moreover, even in the case of nonuniform contact mode, the proposed rapid in-plane growth mode facilitates uniform large-scale replication, which is not possible in conventional imprinting or other molding methods.

Synthesis and Electrocatalytic Applications of Layer-Structured Metal Chalcogenides Composites.

Featured with the attractive properties such as large surface area, unique atomic layer thickness, excellent electronic conductivity, and superior catalytic activity, layered metal chalcogenides (LMCs) have received considerable research attention in electrocatalytic applications. In this review, the approaches developed to synthesize LMCs-based electrocatalysts are summarized. Recent progress in LMCs-based composites for electrochemical energy conversion applications including oxygen reduction reaction, carbon dioxide reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, overall water splitting, and nitrogen reduction reaction is reviewed, and the potential opportunities and practical obstacles for the development of LMCs-based composites as high-performing active substances for electrocatalytic applications are also discussed. This review may provide an inspiring guidance for developing high-performance LMCs for electrochemical energy conversion applications.

Electrohydrodynamic Nanopatterning: A Novel Solvent-Assisted Technique for Unconventional Substrates.

Electrohydrodynamic (EHD)-driven patterning is a pioneering lithographic technique capable of replicating and modifying micro/nanostructures efficiently. However, this process is currently restricted to conventional substrates, as it necessitates a uniform and robust electric field over a large area. Consequently, the use of nontraditional substrates, such as those that are flexible, nonflat, or have high insulation, has been notably limited. In our study, we extend the applicability of EHD-driven patterning by introducing a solvent-assisted capillary peel-and-transfer method that allows the successful removal of diverse EHD-induced structures from their original substrates. Compared with the traditional route, our process boasts a success rate close to 100%. The detached structures can then be efficiently transferred to nonconventional substrates, overcoming the limitations of the traditional EHD process. Our method exhibits significant versatility, as evidenced by successful transfer of structures with engineered wettability and patterned structures composed of metals and metal oxides onto nonconventional substrates.

Transferring 2D TMDs through water-soluble sodium salt catalytic layer.

This study reports a clean and damage-free transfer method that enables the ultrafast transfer of two-dimensional (2D) transition metal dichalcogenides (TMDs) onto desired substrates with a remarkably high yield. We employ a water-soluble sodium salt as both a transfer sacrificial layer for facile transfer and a catalytic layer for the growth of high-quality large-area MoS2using liquid-phase chemical vapor deposition via a catalyzed kinetic growth. We show that the pristine structural and electrical properties of the grown MoS2can be reliably preserved by avoiding detrimental effects during the prolonged harsh-environment transfer process. We demonstrate the technological versatility of the proposed transfer method by fabricating as-transferred MoS2-based back-gated field-effect transistors (FETs). The MoS2FETs exhibit excellent charge mobility as high as 28.7 cm2V-1s-1and an on-off ratio up to ∼107at room temperature, indicating no performance degradation after the transfer process. The proposed transfer method offers universal applicability for various 2D TMDs, mechanical supporting polymers, and target substrates, thus facilitating the facile fabrication of 2D TMD-based electronics and optoelectronics.

Synthesis and Enhanced Photocatalytic Activity of Porous SrTiO3/TiO2 Composites.

Porous photocatalysts have attracted significant attention for their large specific surface area, numerous surface catalytic active sites, and high photocatalytic activity. In this study, porous SrTiO3/TiO2 composites were successfully fabricated through a hydrothermal approach utilizing porous TiO2 as a substrate. The as-synthesized SrTiO3/TiO2 composites were then characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, Brunauer-Emmett-Teller (BET), and ultraviolet-visible spectroscopy (UV-Vis) analysis. The results of SEM and BET indicate that such composites have a porous structure and large surface area. Compared to unadulterated TiO2, SrTiO3 /TiO2 composites exhibit higher photocatalytic performance for the photodegradation of rhodamine B under UV-Vis irradiation. Additionally, it was found that when the content of SrTiO3 reaches 20%, it achieves the maximum photodegradation efficiency of 98.6% under UV-Vis irradiation over 60 min. These results demonstrate that SrTiO3/TiO2 composites are a promising material in terms of environmental cleanliness.

Tunable threshold voltage of an n-type Si nanowire ferroelectric-gate field effect transistor for high-performance nonvolatile memory applications.

We successfully fabricated ferroelectric-gate field effect transistor (FEFET)-based nonvolatile memory devices using an n-type Si nanowire coated with omega-shaped-gate organic ferroelectric poly(vinylidene fluoride-trifluoroethylene) via a low-temperature fabrication process. Our FEFET memory devices with controllable threshold voltage via adjustment of the doping concentration exhibit excellent memory characteristics with ultra-low ON state power dissipation (≤3 nW), a large modulation in channel conductance between the ON and OFF states exceeding 10(5), a long retention time of over 3 × 10(4) s and a high endurance of over 10(5) programming cycles whilst maintaining an I ON/I OFF ratio higher than 10(3). This result may be promising for next-generation nonvolatile memory on flexible substrate applications.

Growth of high-crystalline, single-layer hexagonal boron nitride on recyclable platinum foil.

Hexagonal boron nitride (h-BN) is gaining significant attention as a two-dimensional dielectric material, along with graphene and other such materials. Herein, we demonstrate the growth of highly crystalline, single-layer h-BN on Pt foil through a low-pressure chemical vapor deposition method that allowed h-BN to be grown over a wide area (8 × 25 mm(2)). An electrochemical bubbling-based method was used to transfer the grown h-BN layer from the Pt foil onto an arbitrary substrate. This allowed the Pt foil, which was not consumed during the process, to be recycled repeatedly. The UV-visible absorption spectrum of the single-layer h-BN suggested an optical band gap of 6.06 eV, while a high-resolution transmission electron microscopy image of the same showed the presence of distinct hexagonal arrays of B and N atoms, which were indicative of the highly crystalline nature and single-atom thickness of the h-BN layer. This method of growing single-layer h-BN over large areas was also compatible with use of a sapphire substrate.

Liquid-phase catalyst pre-seeding for controlled growth of layered MoS2 films over a large area via chemical vapor deposition.

We introduce an innovative method that facilitates precise control of high-quality molybdenum disulfide (MoS2) growth, extending up to three layers, on a large scale. This scalable growth is realized by employing solution-based catalysts and precursors in conjunction with chemical vapor deposition (CVD). The catalyst not only diminishes the precursor's activation energy and melting temperature but also augments the overall reaction rate. By regulating the concentration ratio, we directly manipulate the precursor concentrations, thereby promoting clean growth. This unique control mechanism, as delineated in this study, is unprecedented. Our findings confirm that the catalyst introduction does not compromise the quality of the resulting samples. Field effect transistors (FETs) fabricated from the synthesized MoS2 display superior electrical properties; they exhibit a high carrier mobility of 32.1 cm2 V-1 s-1 and an on/off current ratio of 108, signifying their promising electrical performance. Accordingly, our findings suggest that the solution-based CVD strategy presented herein can be potentially utilized for the integration of FETs into a multitude of practical applications.

Hybrid energy harvester based on nanopillar solar cells and PVDF nanogenerator.

A tandem device which integrates a PVDF nanogenerator and silicon (Si) nanopillar solar cell is fabricated. The Si nanopillar solar cell was fabricated using a mask-free plasma etching technique and annealing process. The PVDF nanogenerator was stacked on top of the Si nanopillar solar cell using a spinning method. The optical properties and the device performance of nanowire solar cells have been characterized, and the dependence of device performance versus annealing time or method has been investigated. Furthermore, the PVDF nanogenerator was operated with a 100 dB sound wave and a 0.8 V peak to peak output voltage was generated. This tandem device can successfully harvest energy from both sound vibration and solar light, demonstrating its strong potential as a future ubiquitous energy harvester.

Rapid Electrohydrodynamic-Driven Pattern Replication over a Large Area via Ultrahigh Voltage Pulses.

Despite the prospects of electrohydrodynamic instability patterning (EHIP), poor process parameter controllability is a significant challenge in uniform large-scale nanopatterning. Herein, we introduce a EHIP process using an ultrahigh electric field (>108 V/m) to effectively accelerate the pattern growth evolution. Owing to the strong dependence on a temporal parameter (1/τm) of the field strength, our method not only reduces the completion time of pattern growth but also overcomes critical parametric restrictions on the pattern replication, thereby enhancing the replicated pattern quality in three dimensions. The pattern can be uniformly replicated over the entire film surface even without a perfectly uniform air gap, which has been severely difficult in the conventional method. To further demonstrate how straightforward yet versatile our approach is, we applied our EHIP approach to successfully replicate the densely packed nanostructures of cicada wings.

High-Performance Flexible Energy Storage Devices Based on Graphene Decorated with Flower-Shaped MoS2 Heterostructures.

MoS2, owing to its advantages of having a sheet-like structure, high electrical conductivity, and benign environmental nature, has emerged as a candidate of choice for electrodes of next-generation supercapacitors. Its widespread use is offset, however, by its low energy density and poor durability. In this study, to overcome these limitations, flower-shaped MoS2/graphene heterostructures have been deployed as electrode materials on flexible substrates. Three-electrode measurements yielded an exceptional capacitance of 853 F g-1 at 1.0 A g-1, while device measurements on an asymmetric supercapacitor yielded 208 F g-1 at 0.5 A g-1 and long-term cyclic durability. Nearly 86.5% of the electrochemical capacitance was retained after 10,000 cycles at 0.5 A g-1. Moreover, a remarkable energy density of 65 Wh kg-1 at a power density of 0.33 kW kg-1 was obtained. Our MoS2/Gr heterostructure composites have great potential for the development of advanced energy storage devices.

Stress-induced domain dynamics and phase transitions in epitaxially grown VO2 nanowires.

We demonstrate that surface stresses in epitaxially grown VO2 nanowires (NWs) have a strong effect on the appearance and stability of intermediate insulating M2 phases, as well as the spatial distribution of insulating and metallic domains during structural phase transitions. During the transition from an insulating M1 phase to a metallic R phase, the coexistence of insulating M1 and M2 phases with the absence of a metallic R phase was observed at atmospheric pressure. In addition, we show that, for a VO2 NW without the presence of an epitaxial interface, surface stresses dominantly lead to spatially inhomogeneous phase transitions between insulating and metallic phases. In contrast, for a VO2 NW with the presence of an epitaxial interface, the strong epitaxial interface interaction leads to additional stresses resulting in uniformly alternating insulating and metallic domains along the NW length.

Parameter optimization for positive dielectrophoretic trapping force on ZnO nanoparticles through simulation.

A numerical model of an ethanol droplet system containing ZnO nanoparticles was developed using finite element analysis. The spatial, voltage, and frequency dependence of positive dielectrophoretic trapping mechanism was analyzed with all the AC electrokinetic forces incorporated into our calculation. The AC electrokinetic forces were analyzed individually, compared, and analyzed collectively. The characteristic behavior of each phenomenon was demonstrated, and dielectrophoresis was shown to be the dominant force near the edges of electrodes. Through time evolution study of the particle concentration in the collective analysis, we calculated optimal values of voltage and frequency at which the dielectrophoretic trapping mechanism is the most effective. This versatility of our numerical model promises its potential application in parameter optimization.

Fabrication of an inorganic nano structure for a large area via electrohydrodynamic lithography (EHL).

Electrohydrodynamic lithography (EHL) is one of several unusual lithographic techniques for fabricating sub-micrometer structures over a large area. EHL uses the electrohydrodynamic (EHD) film instability induced by a laterally modulated electric field, which allows it to fabricate not only general organic structures but also structures of various components, such as diblock copolymers and inorganic materials, without contact between the resist and the stamp. Furthermore, EHL is a very special lithographic technique in that diverse structures are fabricated from one stamp via electric field modulation. The electric field is controlled by the replication time, air layer thickness, etc. A replicated inorganic structure was demonstrated from a hexagonal hole and line arrays. The heat treatment of the replicated pattern was carried out to obtain the crystalline phase, after which the samples were characterized via Raman spectroscopy. These values were ascertained using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The results will be useful in providing a facile route for patterning functional metal oxides over a large area. Such a technique can be used to produce photovoltaic cells, memory devices, display devices, etc.

Cu2S Nanoflakes Decorated with NiS Nanoneedles for Enhanced Oxygen Evolution Activity.

Metal sulfides are considered excellent materials for oxygen evolution reaction because of their excellent conductivity and high electrocatalytic activity. In this report, the NiS-Cu2S composites were prepared on copper foam (NiS-Cu2S-CF) using a facile synthetic strategy. The scanning electron microscopy results confirmed that the NiS nanoneedles were successfully grown on Cu2S nanoflakes, greatly increasing the active sites. Particularly, the optimized 15% NiS-Cu2S-CF composite demonstrated excellent oxygen evolution activity with a small overpotential of 308 mV@20 mA cm-2, which is significantly smaller than that of noble metal-based electrocatalysts and other NiS-Cu2S-CF composites. The enhanced oxygen evolution activity is attributed to the unique morphology that can provide ample active sites, rich ion-transfer pathways, and the synergistic effect between NiS and Cu2S, which can boost the electron transfer rate.

Interfacial Microenvironment Modulation Enhancing Catalytic Kinetics of Binary Metal Sulfides Heterostructures for Advanced Water Splitting Electrocatalysts.

Interfacial microenvironment modulation has been proven to be a promising route to fabricate highly efficient catalysts. In this work, the lattice defect-rich NiS2 /MoS2 nanoflakes (NMS NFs) electrocatalysts are successfully synthesized by a simple strategy. Benefiting from the abundant lattice defects and modulated interfacial microenvironment between NiS2 and MoS2 , the prepared NMS NFs show superior catalytic activity for water splitting. Particularly, the optimized NMS NFs (the molar ratio of Ni:Mo = 5:5) exhibit remarkable catalytic activity toward overall water splitting with a voltage of 1.60 V at 10 mA cm-2 in alkaline media, which is lower than that of the noble-metal-based electrocatalysts (1.68 V at 10 mA cm-2 ). The NMS NFs electrocatalysts also show exceptional long-term stability (>50 h) for overall water splitting. The density functional theory results demonstrate that the injection of NiS2 into MoS2 can greatly optimize the catalytic kinetics and reduce the energy barrier for hydrogen/oxygen evolution reactions. The work does not only offer a promising candidate for a highly efficient water splitting electrocatalyst but also highlights that interfacial microenvironment modulation is a potential strategy to optimize the catalytic kinetics.

Parametric scheme for rapid nanopattern replication via electrohydrodynamic instability.

Electrohydrodynamic (EHD) instability patterning exhibits substantial potential for application as a next-generation lithographic technique; nevertheless, its development continues to be hindered by the lack of process parameter controllability, especially when replicating sub-microscale pattern features. In this paper, a new parametric guide is introduced. It features an expanded range of valid parameters by increasing the pattern growth velocity, thereby facilitating reproducible EHD-driven patterning for perfect nanopattern replication. Compared with conventional EHD-driven patterning, the rapid patterning approach not only shortens the patterning time but also exhibits enhanced scalability for replicating small and geometrically diverse features. Numerical analyses and simulations are performed to elucidate the interplay between the pattern growth velocity, fidelity of the replicated features, and boundary between the domains of suitable and unsuitable parametric conditions in EHD-driven patterning. The developed rapid route facilitates nanopattern replication using EHD instability with a wide range of suitable parameters and further opens up many opportunities for device applications using tailor-made nanostructures in an effective and straightforward manner.

Fog Collection Based on Secondary Electrohydrodynamic-Induced Hybrid Structures with Anisotropic Hydrophilicity.

The outcomes of the study of plant surfaces, such as rice leaves or bamboo leaves, have led to extensive efforts being devoted to fabricating anisotropic arrays of micro/nanoscale features for exploring anisotropic droplet spreading. Nonetheless, precise engineering of the density and continuity of three-phase contact lines for anisotropic wetting remains a significant challenge without resorting to chemical modifications and costly procedures. In this work, we investigated secondary electrohydrodynamic instability in polymer films for producing secondary nanosized patterns between the micrometer-sized grooves by controlling the timescale parameter, 1/τm (>10-4 s-1). We experimentally demonstrated facile morphological control of anisotropic wettability without the use of any chemical modifications. Thus, anisotropic hydrophilic surfaces fabricated by the secondary phase instability of polymer films are advantageous for both droplet condensation and removal, thereby outperforming the water collection efficiency of conventional (isotropic) hydrophilic surfaces in water harvesting applications (∼200 mg·cm-2·h-1) with excellent durability.