Effects of ambient temperature and rumen-protected fat supplementation on growth performance, rumen fermentation and blood parameters during cold season in Korean cattle steers.

OBJECTIVE: This study was performed to evaluate whether cold ambient temperature and dietary rumen-protected fat (RPF) supplementation affect growth performance, rumen fermentation, and blood parameters in Korean cattle steers. METHODS: Twenty Korean cattle steers (body weight [BW], 550.6±9.14 kg; age, 19.7±0.13 months) were divided into a conventional control diet group (n = 10) and a 0.5% RPF supplementation group (n = 10). Steers were fed a concentrate diet (1.6% BW) and a rice straw diet (1 kg/d) for 16 weeks (January 9 to February 5 [P1], February 6 to March 5 [P2], March 6 to April 3 [P3], and April 4 to May 2 [P4]). RESULTS: The mean and minimum indoor ambient temperatures in P1 (-3.44°C, -9.40°C) were lower (p<0.001) than those in P3 (5.87°C, -1.86°C) and P4 (11.18°C, 4.28°C). The minimum temperature in P1 fell within the moderate cold-stress (CS) category, as previously reported for dairy cattle, and the minimum temperatures of P2 and P3 were within the mild CS category. Neither month nor RPF supplementation affected the average daily gain or gain-to-feed ratio (p>0.05). Ruminal ammonia nitrogen concentrations were higher (p<0.05) in cold winter than spring. Plasma cortisol concentrations were lower (p<0.05) in the coldest month than in the other months. Serum glucose concentrations were generally higher in colder months than in the other months but were unaffected by RPF supplementation. RPF supplementation increased both total cholesterol (p = 0.004) and high-density lipoprotein (HDL) concentrations (p = 0.03). CONCLUSION: Korean cattle may not be significantly affected by moderate CS, considering that the growth performance of cattle remained unchanged, although variations in blood parameters were observed among the studied months. RPF supplementation altered cholesterol and HDL concentrations but did not affect growth performance.

Effects of heat stress and rumen-protected fat supplementation on growth performance, rumen characteristics, and blood parameters in growing Korean cattle steers.

OBJECTIVE: This study was performed to evaluate whether hot temperature and rumen-protected fat (RPF) supplementation affect growth performance, rumen characteristics, and serum metabolites in growing stage of Korean cattle steers. METHODS: Twenty Korean cattle steers (230.4±4.09 kg of body weight [BW], 10.7±0.09 months of age) were divided into a conventional control diet group (n = 10) and a 0.8% RPF supplementation group (n = 10). Steers were fed 1.5% BW of a concentrate diet and 4 kg of tall fescue hay for 16 weeks (July 10 to August 6 [P1], August 7 to September 3 [P2], September 4 to October 1 [P3], October 2 to 30 [P4], of 2015). RESULTS: The mean temperature-humidity index (THI) was higher (p<0.001) in P1 (76.8), P2 (76.3), and P3 (75.9) than in P4 (50.9). The mean THI of P1-3 were within the alert heat stress (HS) category range according to previously reported categories for feedlot cattle, and the mean THI of P4 was under the thermo-neutral range. Neither month nor RPF supplementation affected (p>0.05) average daily gain and gain to feed ratio. Month and RPF supplementation affected concentrations of glucose, albumin, and high-density lipoprotein (HDL); those of albumin and glucose tended to decrease (p<0.10), but HDL concentration increased (p<0.01) by RPF supplementation. Neither month nor RPF affected (p>0.05) ruminal pH, NH3-N, and volatile fatty acid concentrations, whereas the C2:C3 ratio was affected (p<0.05) by month. CONCLUSION: Korean cattle may not have been significantly affected by alert HS during the growing stage. Growth performance was higher during hotter months, although some changes in blood metabolites were observed. The RPF supplementation affected some blood lipids and carbohydrate metabolites but did not affect growth performance.

Genetic, management, and nutritional factors affecting intramuscular fat deposition in beef cattle - A review.

Intramuscular fat (IMF) content in skeletal muscle including the longissimus dorsi muscle (LM), also known as marbling fat, is one of the most important factors determining beef quality in several countries including Korea, Japan, Australia, and the United States. Genetics and breed, management, and nutrition affect IMF deposition. Japanese Black cattle breed has the highest IMF content in the world, and Korean cattle (also called Hanwoo) the second highest. Here, we review results of research on genetic factors (breed and sex differences and heritability) that affect IMF deposition. Cattle management factors are also important for IMF deposition. Castration of bulls increases IMF deposition in most cattle breeds. The effects of several management factors, including weaning age, castration, slaughter weight and age, and environmental conditions on IMF deposition are also reviewed. Nutritional factors, including fat metabolism, digestion and absorption of feed, glucose/starch availability, and vitamin A, D, and C levels are important for IMF deposition. Manipulating IMF deposition through developmental programming via metabolic imprinting is a recently proposed nutritional method to change potential IMF deposition during the fetal and neonatal periods in rodents and domestic animals. Application of fetal nutritional programming to increase IMF deposition of progeny in later life is reviewed. The coordination of several factors affects IMF deposition. Thus, a combination of several strategies may be needed to manipulate IMF deposition, depending on the consumer's beef preference. In particular, stage-specific feeding programs with concentrate-based diets developed by Japan and Korea are described in this article.

Muscle-specific deletion of signal transducer and activator of transcription 5 augments lipid accumulation in skeletal muscle and liver of mice in response to high-fat diet.

PURPOSE: Growth hormone (GH) controls liver metabolism through the transcription factor signal transducer and activator of transcription 5 (STAT5). However, it remains to be fully understood to what extent other GH/STAT5 target tissues contribute to lipid and glucose metabolism. This question was now addressed in muscle-specific STAT5 knockout (STAT5 MKO) mice model. METHODS: Changes in lipid and glucose metabolism were investigated at physiological and molecular levels in muscle and liver tissues of STAT5 MKO mice under normal diet or high-fat diet (HFD) conditions. RESULTS: STAT5 MKO mice exhibited an increased intramyocellular lipid (IMCL) accumulation in the quadriceps in HFD group. Decreased lipolytic hormone-sensitive lipase transcript levels may contribute to the increased IMCL accumulation in STAT5 MKO mice. STAT5 MKO induced hepatic lipid accumulation without deregulated STAT5 signaling. The upregulation of lipoprotein lipase and Cd36 mRNA levels, an increased trend of very low-density lipoprotein receptor mRNA levels, and elevated circulating concentrations of free fatty acid, triglyceride, and total cholesterol support the increase in hepatic lipid accumulation. CONCLUSIONS: STAT5 MKO in conjunction with a HFD deregulated both lipid and glucose metabolism in skeletal muscle, and this deregulation induced hepatic fat accumulation via increased circulating glucose, FFA, and TG concentrations. Our study emphasizes that muscle-specific STAT5 signaling is important for balancing lipid and glucose metabolism in peripheral tissues, including muscle and liver and that the deregulation of local STAT5 signaling augments HFD-induced lipid accumulation in both muscle and liver.

Effects of ambient temperature and dietary glycerol addition on growth performance, blood parameters and immune cell populations of Korean cattle steers.

OBJECTIVE: This study was performed to evaluate whether ambient temperature and dietary glycerol addition affect growth performance, and blood metabolic and immunological parameters, in beef cattle. METHODS: Twenty Korean cattle steers (405.1±7.11 kg of body weight [BW], 14.2±0.15 months of age) were divided into a conventional control diet group (n = 10) and a 2% glycerol- added group (n = 10). Steers were fed 1.6% BW of a concentrate diet and 0.75% BW of a timothy hay diet for 8 weeks (4 weeks from July 28th to August 26th and 4 weeks from August 27th to September 26th). Blood was collected four times on July 28th, August 11th, August 27th, and September 26th. RESULTS: The maximum indoor ambient temperature-humidity index in August (75.8) was higher (p<0.001) than that in September (70.0), and in August was within the mild heat stress (HS) category range previously reported for dairy cattle. The average daily gain (ADG; p = 0.03) and feed efficiency (p<0.001) were higher in hotter August than in September. Glycerol addition did not affect ADG and feed efficiency. Neither month nor glycerol addition affected blood concentrations of cortisol, triglyceride, or non-esterified fatty acid. Blood concentrations of cholesterol, low-density lipoprotein, high-density lipoprotein, glucose, and albumin were lower (p<0.05) on August 27th than on September 26 th, and blood phosphorus, calcium and magnesium concentrations were also lower on August 27th than on September 27th. Glycerol addition did not affect these blood parameters. Percentages of CD4+ T cells and CD8+ T cells were higher (p<0.05) on July 28th than on August 27th and September 26th. The blood CD8+ T cell population was lower in the glycerol supplemented-group compared to the control group on July 28th and August 27th. CONCLUSION: Korean cattle may not be significantly affected by mild HS, considering that growth performance of cattle was better in hotter conditions, although some changes in blood metabolic and mineral parameters were observed.

Effects of castration on expression of lipid metabolism genes in the liver of korean cattle.

Castration induces the accumulation of body fat and deposition of intramuscular fat in Korean cattle, resulting in improved beef quality. However, little is known about the metabolic adaptations in the liver following castration. To understand changes in lipid metabolism following castration, hepatic expression levels of lipid metabolism genes were compared between Korean bulls and steers. Steers had higher (p<0.001) hepatic lipids contents and higher (p<0.01) mRNA levels of lipogenic acetyl-CoA carboxylase. This differential gene expression may, in part, contribute to increased hepatic lipid content following the castration of bulls. However, we found no differences in the hepatic expression levels of genes related to triglyceride synthesis (mitochondrial glycerol-3-phosphate acyltransferase, diacylglycerol O-acyltransferase 1 and 2) and fatty acid (FA) oxidation (carnitine palmitoyltransferase 1A, C-4 to C-12 straight chain acyl-CoA dehydrogenase, very long chain acyl-CoA dehydrogenase) between bulls and steers. No differences in gene expression for very-low-density lipoprotein (VLDL) secretion, including apolipoprotein B mRNA and microsomal triglyceride transfer protein (MTTP) protein, were observed in the liver although MTTP mRNA levels were higher in steers compared to bulls. In conclusion, FA synthesis may contribute to increased hepatic lipid deposition in steers following castration. However, hepatic lipid metabolism, including triglyceride synthesis, FA oxidation, and VLDL secretion, was not significantly altered by castration. Our results suggest that hepatic lipid metabolism does not significantly contribute to increased body fat deposition in steers following castration.

Effect of knife castration on leukocyte cytokine expression and indicators of stress, pain, and inflammation in Korean cattle bull calves.

OBJECTIVE: This study investigated the effects of surgical castration on behavior, physiological and inflammatory indicators, and leukocyte cytokine mRNA levels in Korean cattle bull calves. METHODS: Nineteen Korean cattle bull calves (average body weight, 254.5 kg; average age, 8.2 months) were divided into two treatment groups: control (n = 9) and castration (n = 10). Surgical castration was performed using Newberry knives and a Henderson castrating tool. Blood was obtained just before castration (0 h) and at 0.5 h, 6 h, 1 d, 3 d, 7 d, and 14 d after castration. Plasma cortisol (PC), saliva cortisol (SC), plasma substance P, and plasma haptoglobin concentrations, and the leucocyte mRNA levels of the interleukin-1-alpha (IL1A), interleukin-1-beta (IL1B), interleukin-1 receptor antagonist (IL1RN), and interleukin-6 (IL6) genes were analyzed. RESULTS: Castration decreased (p<0.01) the average daily gain and gain/feed ratio. Castration reduced the time spent eating (p<0.001) and the eating frequency (p<0.01) and increased (p<0.001) the lying frequency. Castration temporarily increased (p<0.05) circulating PC and SC concentrations at 0.5 h after castration. Castration temporarily increased (p<0.05) plasma substance P concentrations at 1 d after castration. Castration increased (p<0.05) plasma haptoglobin concentrations at 1 and 3 d after castration. Castration increased (p< 0.05) leukocyte mRNA levels of the IL1A, IL1B, IL1RN, and IL6 genes at 6 h after castration. CONCLUSION: Castration temporarily induced stress and expression of leucocyte inflammatory cytokine genes in Korean cattle bull calves.

Effects of dietary glycerol supplementation on meat quality, palatability, and lipid metabolism gene expression in the longissimus thoracis of Hanwoo steers.

This study tested the hypothesis that dietary glycerol supplementation (GS) would affect growth of Hanwoo steers, beef marbling and palatability, and gene expression for lipid uptake and transport and lipogenesis in the longissimus thoracis (LT). Diets with or without 45.2 g daily glycerol supplementation/kg dry matter concentrate were tested in fourteen Hanwoo steers during a 16-week feeding trial. GS did not affect (P ≥ 0.40) the average daily gain or the gain-to-feed ratio. GS increased the LT marbling score (P = 0.01). GS enhanced (P ≤ 0.01) the sensory traits, including the flavor and overall acceptance of the LT. GS tended (0.05 < P ≤ 0.10) to upregulate mRNA levels of fatty acid translocase, lipoprotein lipase, and fatty acid binding protein 4 genes in the LT. These tendencies of upregulated expression of fatty acid uptake and cytosolic transport genes may, in part, contribute to the increased marbling by GS. The increased marbling degree caused by GS may improve palatability including the flavor and overall acceptance of the LT.

Partial Substitution of Corn Grain in the Diet with Beet Pulp Reveals Increased Ruminal Acetate Proportion and Circulating Insulin Levels in Korean Cattle Steers.

We investigated the effects of the partial substitution of corn grain in the diet with beet pulp on growth performance, ruminal fermentation characteristics, microbial profiles, and blood lipogenic parameters in fattening steers. Twelve Korean cattle steers (body weight, 485 ± 19.32 kg; age, 18.0 ± 0.17 months) were equally divided into corn grain (CG) and beet pulp (BP) groups. Approximately 75% of dry matter of the requirement was offered as a concentrate portion, and the remaining 25% was offered as oat straw. Eighty percent of the concentrate portion was provided by a pelleted basal concentrate, and the remaining 20% with corn grain for the CG group, or 18% beet pulp plus 2.0% rumen-protected fat for the BP group, respectively, by top dressing. The experiment was conducted for 14 weeks, including a 2-week acclimation period. Growth rate was not affected by beet pulp feeding (p = 0.55). The molar proportions of ruminal acetate (p < 0.05) on wk 4, the relative abundances of ruminal cellulolytic bacteria, including Fibrobacter succinogenes (p = 0.01) and Ruminococcus albus (p = 0.04) on wk 12, and serum insulin concentrations (p < 0.05) on wk 12 were higher in the BP group than in the CG group, whereas the molar proportions of propionate (p < 0.05) on wks 8 and 12 and serum nonesterified fatty acids (p < 0.05) on wk 12 were lower in the BP group. Beet pulp could be used as a lipogenic energy source without affecting growth performance during the fattening period of cattle.

Shape-Controlled and Well-Arrayed Heterogeneous Nanostructures via Melting Point Modulation at the Nanoscale.

A novel method for fabricating shape-controlled and well-arrayed heterogeneous nanostructures by altering the melting point of the metal thin film at the nanoscale is proposed. Silver nanofilms (AgNFs) are transformed into silver nanoislands (AgNIs), silver nanoparticles (AgNPs), and silver nanogaps (AgNGs) that are well-ordered and repositioned inside the gold nanoholes (AuNHs) depending on the diameter of the AuNHs, the thickness of the AgNF, and the heating temperature (120-200 °C). This method demonstrates the ability to fabricate uniform, stable, and unique structures with a fast, simple, and mass-producible process. For demonstrating the diverse applicability of the developed structures, high-density AgNGs inside the AuNHs are utilized as surface-enhanced Raman spectroscopy (SERS) substrates. These AgNGs-based SERS substrates exhibit a performance enhancement, which is 1.06 × 106 times greater than that of a metal film, with a relative standard deviation of 19.8%. The developed AgNP/AgNI structures are also used as nonreproducible anti-counterfeiting signs, and the anti-counterfeiting/readout system is demonstrated via image processing. Therefore, our method could play a vital role in the nanofabrication of high-demand nanostructures.

Biocompatible Nanotransfer Printing Based on Water Bridge Formation in Hyaluronic Acid and Its Application to Smart Contact Lenses.

Many conventional micropatterning and nanopatterning techniques employ toxic chemicals, rendering them nonbiocompatible and unsuited for biodevice production. Herein the formation of water bridges on the surface of hyaluronic acid (HA) films is exploited to develop a transfer-based nanopatterning method applicable to diverse structures and materials. The HA film surface, made deformable via water bridge generation, is brought into contact with a functional material and subjected to thermal treatment, which results in film shrinkage, allowing a robust pattern transfer. The proposed biocompatible method, which avoids the use of extra chemicals, enables the transfer of nanoscale, microscale, and thin-film structures as well as functional materials such as metals and metal oxides. A nanopatterned HA film is transferred onto a moisture-containing contact lens to fabricate smart contact lenses with unique optical characteristics of rationally designed optical nanopatterns. These lenses demonstrated binocular parallax-induced stereoscopy via nanoline array polarization and acted as cutoff filters, with nanodot arrays, capable of treating Irlen syndrome.

Large-Area Nanogap-Controlled 3D Nanoarchitectures Fabricated via Layer-by-Layer Nanoimprint.

The fabrication of large-area and flexible nanostructures currently presents various challenges related to the special requirements for 3D multilayer nanostructures, ultrasmall nanogaps, and size-controlled nanomeshes. To overcome these rigorous challenges, a simple method for fabricating wafer-scale, ultrasmall nanogaps on a flexible substrate using a temperature above the glass transition temperature (Tg) of the substrate and by layer-by-layer nanoimprinting is proposed here. The size of the nanogaps can be easily controlled by adjusting the pressure, heating time, and heating temperature. In addition, 3D multilayer nanostructures and nanocomposites with 2, 3, 5, 7, and 20 layers were fabricated using this method. The fabricated nanogaps with sizes ranging from approximately 1 to 40 nm were observed via high-resolution transmission electron microscopy (HRTEM). The multilayered nanostructures were evaluated using focused ion beam (FIB) technology. Compared with conventional methods, our method could not only easily control the size of the nanogaps on the flexible large-area substrate but could also achieve fast, simple, and cost-effective fabrication of 3D multilayer nanostructures and nanocomposites without any post-treatment. Moreover, a transparent electrode and nanoheater were fabricated and evaluated. Finally, surface-enhanced Raman scattering substrates with different nanogaps were evaluated using rhodamine 6G. In conclusion, it is believed that the proposed method can solve the problems related to the high requirements of nanofabrication and can be applied in the detection of small molecules and for manufacturing flexible electronics and soft actuators.

Effects of dietary glycerol inclusion on growth performance, carcass and meat quality characteristics, glycogen content, and meat volatile compounds in Korean cattle steers.

OBJECTIVE: We have tested our hypothesis that inclusion of purified glycerol as a replacer of portions of dried distillers grain with solubles (DDGS) would affect growth performance, rumen fermentation and blood parameters, carcass and sensory traits, reducing sugar and glycogen contents, and volatile compound profiles in longissimus thoracis (LT) in Korean cattle steers. METHODS: A total of 20 Korean cattle steers (27.0±0.2 months old; 647±10.5 kg body weight [BW]) were assigned to a conventional control group or a glycerol group (3.17% purified glycerol addition as a replacement for DDGS and molasses). The steers were individually allowed to receive the experimental concentrate at the daily amount of 1.5% of their individual BW and a total 1.0 of kg/d of rice straw twice daily. The feeding trial was conducted for a period of 20 weeks. RESULTS: Glycerol supplementation (GS) increased (p = 0.001) concentrate intake. However, GS did not affect (p>0.05) average daily gain, feed efficiency, and ruminal volatile fatty acid concentrations. GS tended to increase (p≤0.10) serum glucose concentrations at the 16th and 20th weeks. GS decreased (p = 0.001) LT pH. GS did not affect (p>0.05) carcass traits and the chemical or physicochemical compositions, reducing sugar or glycogen contents, sensory traits, and most of volatile compounds in the LT. CONCLUSION: The inclusion of purified glycerol as a replacement for DDGS in the finishing diet did not affect growth performance, rumen fermentation parameters, and carcass quality in Korean cattle. The purified glycerol could be used as a substitute for other energy sources such as DDGS in beef cattle, depending on the price.

Effective Dispensing Methods for Loading Drugs Only to the Tip of DNA Microneedles.

Here, we propose a novel and simple method to efficiently capture the diffusion of fluorescein isothiocyanate (FITC)-dextran from a biocompatible substance and load the drug only to the tip of DNA microneedles. A dispensing and suction method was chosen to fabricate the designed microneedles with efficient amounts of FITC as the drug model. Importantly, the vacuum process, which could influence the capturing of FITC diffusion from the tip, was evaluated during the manufacturing process. In addition, the simulations were consistent with the experimental results and showed apparent diffusion. Moreover, dextrans of different molecular weights labeled with FITC were chosen to fabricate the tip of microneedles for demonstrating their applicability. Finally, a micro-jetting system with a micro-nozzle (diameter: 80 µm) was developed to achieve the accurate and rapid loading of small amounts of FITC using the anti-diffusion and micro-jetting methods. Our method not only uses a simple and fast manufacturing process, but also fabricates the tips of microneedles more efficiently with FITC compared with the existing methods. We believe that the proposed method is essential for the clinical applications of the microneedle drug delivery platform.

3D Layer-By-Layer Pd-Containing Nanocomposite Platforms for Enhancing the Performance of Hydrogen Sensors.

Herein, a nanowelding technique is adopted to fabricate three-dimensional layer-by-layer Pd-containing nanocomposite structures with special properties. Nanowires fabricated from noble metals (Pd, Pt, Au, and Ag) were used to prepare Pd-Pd nanostructures and Pd-Au, Pd-Pt, Pd-Ag, and Pd-Pt-Au nanocomposite structures by controlling the welding temperature. The recrystallization behavior of the welded composite materials was observed and analyzed. In addition, their excellent mechanical and electrical properties were confirmed by performing 10,000 bending test cycles and measuring the resistances. Finally, flexible and wearable nanoheaters and gas sensors were fabricated using our proposed method. In comparison with conventional techniques, our proposed method can not only easily achieve sensors with a large surface area and flexibility but also improve their performance through the addition of catalyst metals. A gas sensor fabricated using the Pd-Au nanocomposites demonstrated 3.9-fold and 1.1-fold faster H2 recovery and response, respectively, than a pure Pd-Pd gas sensor device. Moreover, the Pd-Ag nanocomposite exhibited a high sensitivity of 5.5% (better than that of other fabricated gas sensors) for 1.6% H2 concentration. Therefore, we believe that the fabricated nanocomposites appear promising for wide applications in wearable gas sensors, flexible optical devices, and flexible catalytic devices.

Nanotransfer Printing on Textile Substrate with Water-Soluble Polymer Nanotemplate.

The growing interest in wearable devices has drawn increased attention to smart textiles, and various transfer methods have therefore been introduced to realize the desired functions using textiles as substrates. However, the existing transfer techniques are not suited for the production of sophisticated nanoscale patterns on textiles, as textile roughness and difficulty of precise pattern size control hinder miniaturization, deteriorate device performance, and complicate the use of optical phenomena such as surface plasmon resonance. To address these limitations, we have developed a method based on simple dissolution of a water-soluble nanopatterned polymer film for the facile transfer of nanostructures of on-film-deposited functional materials onto textile substrates. The above method tolerates a variety of functional materials, e.g., metals and SiO2, and nano/microscale structures, e.g., nanoscale lines, dots, holes, and mesh patterns with a minimum pattern width of 50 nm. The proposed technique is employed to fabricate a palladium nanoscale line array (utilized as a highly sensitive and selective hydrogen sensor) and is shown to be suitable for the production of security patterns on textiles, as it allows the printing of complex nanostructure patterns with electrical and optical functionalities.

Adhesive-Layer-Free and Double-Faced Nanotransfer Lithography for a Flexible Large-Area MetaSurface Hologram.

Herein, we develop an adhesive-free double-faced nanotransfer lithography (ADNT) technique based on the surface deformation of flexible substrates under the conditions of temperature and pressure control and thus address the challenge of realizing the mass production of large-area nanodevices in the fields of optics, metasurfaces, and holograms. During ADNT, which is conducted on a flexible polymer substrate above its glass transition temperature in the absence of adhesive materials and chemical bonding agents, nanostructures from the polymer stamp are attached to the deformed polymer substrate. Various silicon masters are employed to prove our method applicable to arbitrary nanopatterns, and diverse Ag and Au nanostructures are deposited on polymer molds to demonstrate the wide scope of useable metals. Finally, ADNT is used to (i) produce a flexible large-area hologram on the defect-free poly(methyl methacrylate) (PMMA) film and (ii) fabricate a metasurface hologram and a color filter on the front and back surfaces of the PMMA film, respectively, to realize dual functionality. Thus, it is concluded that the use of ADNT can decrease the fabrication time and cost of high-density nanodevices and facilitate their commercialization.

Differential expression of extracellular matrix and integrin genes in the longissimus thoracis between bulls and steers and their association with intramuscular fat contents.

This study was performed to compare expression of genes for extracellular matrix (ECM) components, ECM degrading factors, and integrin subunits in the longissimus thoracis (LT) between bulls and steers. Steers had lower (P<0.05) ECM component collagen type 1 α1 and collagen type 3 α1 mRNA levels than did bulls, but they had higher (P<0.05) thrombospondin 1 mRNA and protein levels. Steers had higher (P<0.01) matrix metalloproteinase (MMP) 9 mRNA levels than did bulls. Steers had higher (P<0.05) integrin α5 mRNA levels but lower (P<0.05) integrin ß6 mRNA and protein levels; however, expression levels of several other integrin subunits were not different between steers and bulls. MMP9 mRNA levels were positively correlated (P<0.05) with intramuscular fat content in bull group. In conclusion, these results demonstrate that castration has moderate effects on expression of ECM components, ECM degrading factors, and integrin subunit genes in the LT.

Deletion of liver-specific STAT5 gene alters the expression of bile acid metabolism genes and reduces liver damage in lithogenic diet-fed mice.

Signal transducers and activators of transcription 5 (STAT5) mediates growth hormone signals, which may control hepatic cholesterol uptake and bile acid metabolism. Deregulation of liver cholesterol homeostasis and bile acid metabolism may cause liver damage and cholesterol gallstone development. The purpose of this study was to understand the role of local STAT5 signaling in cholesterol and bile acid metabolism using liver-specific STAT5 knock-out (STAT5 LKO) mice on a normal diet and a cholesterol- and bile acid-containing lithogenic diet. STAT5 LKO mice showed significant down-regulation of STAT5 and insulin-like growth factor-1 genes. STAT5 gene deletion had a minor effect on cholesterol metabolism, as evidenced by a minor change in circulating cholesterol levels and no changes in expression of hepatic low-density lipoprotein receptor and cholesterol synthesis genes in STAT5 LKO mice. In contrast, bile acid synthesis and uptake genes were profoundly down-regulated and bile acid detoxification genes were up-regulated in STAT5 LKO mice. In STAT5 fl/fl mice, a lithogenic diet induced liver damage, as evidenced by moderate increases in liver ballooning, inflammation and fibrosis. However, STAT5 deletion ameliorated the degree of liver damage induced by the lithogenic diet. In STAT5 LKO mice, a lithogenic diet did not alter the incidence or severity of cholesterol gallstones. In conclusion, local STAT5 signaling does not have a significant role in cholesterol metabolism. In contrast, hepatic STAT5 signaling has significant roles in regulating transcription of genes for synthesis, transport and detoxification of bile acids, but it has only a minor role in bile acid metabolism.

Effects of road transportation on metabolic and immunological responses in Holstein heifers.

This study examined the effects of road transportation on metabolic and immunological responses in dairy heifers. Twenty Holstein heifers in early pregnancy were divided into non-transported (NT; n = 7) and transported (T; n = 13) groups. Blood was collected before transportation (BT), immediately after transportation for 100 km (T1) and 200 km (T2), and 24 h after transportation (AT). The T heifers had higher (P < 0.05) blood cortisol and non-esterified fatty acid concentrations after T1 and T2 than did NT heifers. By contrast, the T heifers had lower (P < 0.05) serum triglyceride concentrations after T1 and T2 than had the NT heifers. The serum cortisol and triglyceride concentrations returned (P > 0.05) to the BT concentrations at 24 h AT in the T heifers. The granulocyte-to-lymphocyte ratio and the percentage of monocytes were higher (P < 0.05) after T2 in the T heifers than in the NT heifers, suggesting that transportation stress increased the numbers of innate immune cells. T heifers had higher (P < 0.01) plasma haptoglobin concentrations than NT heifers 24 h AT. In conclusion, transportation increased cortisol secretion and was correlated with increased metabolic responses and up-regulation of peripheral innate immune cells in dairy heifers.