Bipolar Membranes to Promote Formation of Tight Ice-Like Water for Efficient and Sustainable Water Splitting.

Bipolar membranes (BPMs) have recently received much attention for their potential to improve the water dissociation reaction (WDR) at their junction by utilizing catalysts. Herein, composite catalysts (Fe2 O3 @GO) comprising hematite nanoparticles (α-Fe2 O3 ) grown on 2D graphene oxide (GO) nanosheets are reported, which show unprecedentedly high water dissociation performance in the BPM. Furthermore, new catalytic roles in facilitating WDR at the catalyst-water interface are mechanistically elucidated. It is demonstrated that the partially dissociated bound water, formed by the strongly Lewis-acidic Fe atoms of the Fe2 O3 @GO catalyst, helps the "ice-like water" to become tighter, consequently resulting in weaker intramolecular OH bonds, which reduces activation barriers and thus significantly improves the WDR rate. Notably, Fe2 O3 @GO-incorporated BPM shows an extremely low water dissociation potential (0.89 V), compared to commercially available BPM (BP-1E, 1.13 V) at 100 mA cm-2 , and it is quite close to the theoretical potential required for WDR (0.83 V). This performance reduces the required electrical energy consumption for water splitting by ≈40%, as compared to monopolar (Nafion 212 and Selemion AMV) membranes. These results can provide a new approach for the development of water dissociation catalysts and BPMs for realizing highly efficient water splitting systems.

Nanocomposite Membranes Comprising Crosslinked Polymer Blends of Poly(vinyl alcohol)/Poly(styrene sulfonic acid-co-maleic acid) and Fumed Silica Nanoparticles.

Nanocomposite polymer electrolyte membranes comprising a crosslinked polymer blend of poly(vinyl alcohol)/poly(styrene sulfonic acid-co-maleic acid) (PVA/PSSA-co-MA) and fumed silica nanoparticles were prepared for direct methanol fuel cell (DMFC) applications. Silica nanoparticles could be incorporated well uniformly in the completely miscible system, which can form a three-dimensional network structure to achieve the enhancement of mechanical properties as well as the additional reduction of methanol permeability. The optimized proton conductivities and methanol permeability of the PVA/PSSA-co-MA membrane with silica nanoparticles of 10 wt.% were 0.0482 S cm-1 at room temperature and 5.78 × 10-7 cm2 s-1 at the methanol concentration of 40% (w/w), respectively.

Exploring Interfacial Events in Gold-Nanocluster-Sensitized Solar Cells: Insights into the Effects of the Cluster Size and Electrolyte on Solar Cell Performance.

Gold nanoclusters (Au NCs) with molecule-like behavior have emerged as a new light harvester in various energy conversion systems. Despite several important strides made recently, efforts toward the utilization of NCs as a light harvester have been primarily restricted to proving their potency and feasibility. In solar cell applications, ground-breaking research with a power conversion efficiency (PCE) of more than 2% has recently been reported. Because of the lack of complete characterization of metal cluster-sensitized solar cells (MCSSCs), however, comprehensive understanding of the interfacial events and limiting factors which dictate their performance remains elusive. In this regard, we provide deep insight into MCSSCs for the first time by performing in-depth electrochemical impedance spectroscopy (EIS) analysis combined with physical characterization and density functional theory (DFT) calculations of Au NCs. In particular, we focused on the effect of the size of the Au NCs and electrolytes on the performance of MCSSCs and reveal that they are significantly influential on important solar cell characteristics such as the light absorption capability, charge injection kinetics, interfacial charge recombination, and charge transport. Besides offering comprehensive insights, this work represents an important stepping stone toward the development of MCSSCs by accomplishing a new PCE record of 3.8%.

Strongly Coupled Cyclometalated Ruthenium Triarylamine Chromophores as Sensitizers for DSSCs.

A series of anchor-functionalized cyclometalated bis(tridentate) ruthenium(II) triarylamine hybrids [Ru(dbp-X)(tctpy)](2-) [2 a](2-) -[2 c](2-) (H3 tctpy=2,2';6',2''-terpyridine-4,4',4''-tricarboxylic acid; dpbH=1,3-dipyridylbenzene; X=N(4-C6 H4 OMe)2 ([2 a](2-) ), NPh2 ([2 b](2-) ), N-carbazolyl [2 c](2-) ) was synthesized and characterized. All complexes show broad absorption bands in the range 300-700 nm with a maximum at about 545 nm. Methyl esters [Ru(Me3 tctpy)(dpb-X)](+) [1 a](+) -[1 c](+) are oxidized to the strongly coupled mixed-valent species [1 a](2+) -[1 c](2+) and the Ru(III) (aminium) complexes [1 a](3+) -[1 c](3+) at comparably low oxidation potentials. Theoretical calculations suggest an increasing spin delocalization between the metal center and the triarylamine unit in the order [1 a](2+) <[1 b](2+) <[1 c](2+) . Solar cells were prepared with the saponified complexes [2 a](2-) -[2 c](2-) and the reference dye N719 as sensitizers using the I3 (-) /I(-) couple and [Co(bpy)3 ](3+/2+) and [Co(ddpd)2 ](3+/2+) couples as [B(C6 F5 )4 ](-) salts as electrolytes (bpy=2,2'-bipyridine; ddpd=N,N'-dimethyl-N,N'-dipyridin-2-yl-pyridine-2,6-diamine). Cells with [2 c](2-) and I3 (-) /I(-) electrolyte perform similarly to cells with N719. In the presence of cobalt electrolytes, all efficiencies are reduced, yet under these conditions [2 c](2-) outperforms N719.

Enhanced photocatalytic performance at a Au/N-TiO2 hollow nanowire array by a combination of light scattering and reduced recombination.

We demonstrate one-step gold nanoparticle (AuNP) coating and the surface nitridation of TiO2 nanowires (TiO2-NWs) to amplify visible-light photon reflection. The surface nitridation of TiO2-NW arrays maximizes the anchoring of AuNPs, and the subsequent reduction of the band gap energy from 3.26 eV to 2.69 eV affords visible-light activity. The finite-difference time-domain (FDTD) simulation method clearly exhibits the enhancement in the strengths of localized electric fields between AuNPs and the nanowires, which significantly improves the photocatalytic (PC) performance. Both nitridation and AuNP decoration of TiO2-NWs result in beneficial effects of high (e(-)/h(+)) pair separation through healing of the oxygen vacancies. The combined effect of harvesting visible-light photons and reducing recombination in Au/N-doped TiO2-NWs promotes the photocatalytic activity towards degradation of methyl orange to an unprecedented level, ∼4 fold (1.1 × 10(-2) min) more than does TiO2-NWs (2.9 × 10(-3) min(-1)). The proposed AuNP decoration of nitridated TiO2-NW surfaces can be applied to a wide range of n-type metal oxides for photoanodes in photocatalytic applications.

Successful demonstration of an efficient I(-)/(SeCN)2 redox mediator for dye-sensitized solar cells.

A new I(-)/(SeCN)(2) redox mediator has favorable properties for dye-sensitized solar cells (DSCs) such as less visible light absorption, higher ionic conductivity, and downward shift of redox potential than I(-)/I(3)(-). It was then applied for DSCs towards increasing energy conversion efficiency, giving a new potential for improving performance.

Electronic optimization of heteroleptic Ru(II) bipyridine complexes by remote substituents: synthesis, characterization, and application to dye-sensitized solar cells.

We prepared a series of new heteroleptic ruthenium(II) complexes, Ru(NCS)(2)LL' (3a-3e), where L is 4,4'-di(hydroxycarbonyl)-2,2'-bipyridine and L' is 4,4'-di(p-X-phenyl)-2,2'-pyridine (X = CN (a), F (b), H (c), OMe (d), and NMe(2) (e)), in an attempt to explore the structure-activity relationships in their photophysical and electrochemical behavior and in their performance in dye-sensitized solar cells (DSSCs). When substituent X is changed from electron-donating NMe(2) to electron-withdrawing CN, the absorption and emission maxima reveal systematic bathochromic shifts. The redox potentials of these dyes are also significantly influenced by X. The electronic properties of the dyes were theoretically analyzed using density functional theory calculations; the results show good correlations with the experimental results. The solar-cell performance of DSSCs based on dye-grafted nanocrystalline TiO(2) using 3a-3e and standard N3 (bis[(4,4'-carboxy-2,2'-bipyridine)(thiocyanato)]ruthenium(II)) were compared, revealing substantial dependences on the dye structures, particularly on the remote substituent X. The 3d-based device showed the best performance: η = 8.30%, J(SC) = 16.0 mA·cm(-2), V(OC) = 717 mV, and ff = 0.72. These values are better than N3-based device.

Interfacial Engineering at Quantum Dot-Sensitized TiO2 Photoelectrodes for Ultrahigh Photocurrent Generation.

Metal oxide semiconductor/chalcogenide quantum dot (QD) heterostructured photoanodes show photocurrent densities >30 mA/cm2 with ZnO, approaching the theoretical limits in photovoltaic (PV) cells. However, comparative performance has not been achieved with TiO2. Here, we applied a TiO2(B) surface passivation layer (SPL) on TiO2/QD (PbS and CdS) and achieved a photocurrent density of 34.59 mA/cm2 under AM 1.5G illumination for PV cells, the highest recorded to date. The SPL improves electron conductivity by increasing the density of surface states, facilitating multiple trapping/detrapping transport, and increasing the coordination number of TiO2 nanoparticles. This, along with impeded electron recombination, led to enhanced collection efficiency, which is a major factor for performance. Furthermore, SPL-treated TiO2/QD photoanodes were successfully exploited in photoelectrochemical water splitting cells, showing an excellent photocurrent density of 14.43 mA/cm2 at 0.82 V versus the Reversible Hydrogen Electrode (RHE). These results suggest a new promising strategy for the development of high-performance photoelectrochemical devices.

An artificial solid interphase with polymers of intrinsic microporosity for highly stable Li metal anodes.

Polymers of intrinsic microporosity (PIM-1) have an appropriate pore size to reduce the solvation number of Li ions in electrolytes. This unique pore structure of PIM-1 as a solid interphase can suppress transport of solvent and consequently unwanted chemical reactions at the interface of anodes, thereby extending the cycle life of Li metal anodes.

Imidazolium Iodide-Doped PEDOT Nanofibers as Conductive Catalysts for Highly Efficient Solid-State Dye-Sensitized Solar Cells Employing Polymer Electrolyte.

The electrical conductivity and catalytic activity of nanofibrous poly(3,4-ethylenedioxythiophene)s (PEDOT NFs) was improved by redoping with dimethyl imidazolium iodide (DMII) as a charge transfer facilitator. Addition of the new DMII dopant into the PEDOT NFs reduced the concentration of dodecyl sulfate anions (DS-) predoped during the polymerization process and concomitantly enhanced the doping concentration of I- by ion exchange. Redoping with DMII increased the mobility of the PEDOT NFs by up to 18-fold and improved the conductivity due to the enhanced linearization, suppressed aggregation, and improved crystallinity of the PEDOT chains. The catalytic activity was also improved, primarily due to the increase in the compatibility and the effective surface area upon replacement of sticky DS- with the more basic and smaller I- of DMII on the surface of the PEDOT NFs. The charge-transfer resistance across the interface between the poly(ethylene oxide)-based solid polymer electrolyte and PEDOT NF counter electrode (CE) was thus reduced to a large extent, giving an energy conversion efficiency (ECE) of 8.52% for solid-state dye-sensitized solar cells (DSCs), which is even better than that achieved with Pt CE (8.25%). This is the highest ECE reported for solid-state DSCs with conductive polymer CEs under 1 sun conditions.

Triumphing over Charge Transfer Limitations of PEDOT Nanofiber Reduction Catalyst by 1,2-Ethanedithiol Doping for Quantum Dot Solar Cells.

Charge transfer between a conducting polymer-based counter electrode (CE) and a polysulfide (S2-/Sn2-) electrolyte mediator is a key limitation to improvements of solar energy conversion efficiency (ECE) in quantum-dot-sensitized solar cells (QDSCs). In this paper, 1,2-ethanedithiol (EDT) was doped into nanofibrous poly(3,4-ethylenedioxythiophene) (PEDOT NF) to overcome the charge transfer limitation between PEDOT NF and S2-/Sn2-. EDT not only helps to reduce the aggregation and thus enhance the linearization of the PEDOT chains but also changes the molecular conformation of the PEDOT chains from a benzoid to a quinoid structure. EDT-doped PEDOT NF-based CEs showed almost 3.7 times higher conductivity, better electrocatalytic activity, and improved compatibility with S2-/Sn2- in an aqueous electrolyte. As a result, the charge transfer resistance between the polymer-based CE and the S2-/Sn2- electrolyte was significantly reduced, resulting in over 3% ECE in QDSCs, more than double that of a bare PEDOT NF-based CE.

Dual-Function Au@Y2O3:Eu3+ Smart Film for Enhanced Power Conversion Efficiency and Long-Term Stability of Perovskite Solar Cells.

In the present study, a dual-functional smart film combining the effects of wavelength conversion and amplification of the converted wave by the localized surface plasmon resonance has been investigated for a perovskite solar cell. This dual-functional film, composed of Au nanoparticles coated on the surface of Y2O3:Eu3+ phosphor (Au@Y2O3:Eu3+) nanoparticle monolayer, enhances the solar energy conversion efficiency to electrical energy and long-term stability of photovoltaic cells. Coupling between the Y2O3:Eu3+ phosphor monolayer and ultraviolet solar light induces the latter to be converted into visible light with a quantum yield above 80%. Concurrently, the Au nanoparticle monolayer on the phosphor nanoparticle monolayer amplifies the converted visible light by up to 170%. This synergy leads to an increased solar light energy conversion efficiency of perovskite solar cells. Simultaneously, the dual-function film suppresses the photodegradation of perovskite by UV light, resulting in long-term stability. Introducing the hybrid smart Au@Y2O3:Eu3+ film in perovskite solar cells increases their overall solar-to-electrical energy conversion efficiency to 16.1% and enhances long-term stability, as compared to the value of 15.2% for standard perovskite solar cells. The synergism between the wavelength conversion effect of the phosphor nanoparticle monolayer and the wave amplification by the localized surface plasmon resonance of the Au nanoparticle monolayer in a perovskite solar cell is comparatively investigated, providing a viable strategy of broadening the solar spectrum utilization.

Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells.

The stability of perovskite solar cells is one of the major challenges for this technology to reach commercialization, with water believed to be the major degradation source. In this work, a range of devices containing different cathode metal contacts in the configuration ITO/PEDOT:PSS/MAPbI3/PCBM/Metal are fully electrically characterized before and after degradation caused by steady illumination during 4 h that induces a dramatic reduction in power conversion efficiency from values of 12 to 1.8%. We show that a decrease in performance and generation of the S-shape is associated with chemical degradation of the metal contact. Alternatively, use of Cr2O3/Cr as the contact enhances the stability, but modification of the energetic profile during steady illumination takes place, significantly reducing the performance. Several techniques including capacitance-voltage, X-ray diffraction, and optical absorption results suggest that the properties of the bulk perovskite layer are little affected in the device degradation process. Capacitance-voltage and impedance spectroscopy results show that the electrical properties of the cathode contact are being modified by generation of a dipole at the cathode that causes a large shift of the flat-band potential that modifies the interfacial energy barrier and impedes efficient extraction of electrons. Ionic movement in the perovskite layer changes the energy profile close to the contacts, modifying the energy level stabilization at the cathode. These results provide insights into the degradation mechanisms of perovskite solar cells and highlight the importance to further study the use of protecting layers to avoid the chemical reactivity of the perovskite with the external contacts.

Roles of terminal groups of oligomer electrolytes in determining photovoltaic performances of dye-sensitized solar cells.

The effect of terminal groups of oligomer electrolytes on the photovoltaic performance of dye-sensitized solar cells (DSSCs) have been systematically investigated to show that the terminal group plays a critical role in determining the concentration of I(3)(-), ionic conductivity, flatband potential and consequently the energy conversion efficiency.

Dye-sensitized solar cells based on composite solid polymer electrolytes.

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.

Accelerated CO2 transport on surface of AgO nanoparticles in ionic liquid BMIMBF4.

The AgO nanoparticles were utilized for a CO2 separation membrane. The AgO nanoparticles were successfully generated in ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate (BMIMBF4) by favorable interaction between the surface of particles and the counteranion of BMIMBF4. The generated AgO nanoparticles were confirmed by TEM, and the average size was 20 nm. Coordinative interactions of dissociated AgO particles with BMIM(+)BF4(-) were investigated by FT-Raman spectroscopy. When the ionic liquid BMIMBF4 containing AgO nanoparticles was utilized as a CO2 separation membrane, the separation performance was largely enhanced.

Excellent optical and interfacial performance of a PEDOT-b-PEG block copolymer counter electrode for polymer electrolyte-based solid-state dye-sensitized solar cells.

A poly(3,4-ethylenedioxythiophene)-b-poly(ethylene glycol) (PEDOT-b-PEG) block copolymer doped with perchlorate on FTO shows excellent optical and interfacial performance as a counter electrode (CE), such as low charge transfer resistance and low reflectivity for polymer electrolyte-based solid-state dye-sensitized solar cells (DSCs), resulting in 8.45% energy conversion efficiency, greater than the common Pt CE, via a facile room-temperature process.

Surface Modification of TiO2 Photoanodes with Fluorinated Self-Assembled Monolayers for Highly Efficient Dye-Sensitized Solar Cells.

Dye aggregation and electron recombination in TiO2 photoanodes are the two major phenomena lowering the energy conversion efficiency of dye-sensitized solar cells (DSCs). Herein, we introduce a novel surface modification strategy of TiO2 photoanodes by the fluorinated self-assembled monolayer (F-SAM) formation with 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFTS), blocking the vacant sites of the TiO2 surface after dye adsorption. The F-SAM helps to efficiently lower the surface tension, resulting in efficient repelling ions, e.g., I3(-), in the electrolyte to decrease the electron recombination rate, and the role of F-SAM is characterized in detail by impedance spectroscopy using a diffusion-recombination model. In addition, the dye aggregates on the TiO2 surface are relaxed by the F-SAM with large conformational perturbation (i.e., helix structure) seemingly because of steric hindrance developed during the SAM formation. Such multifunctional effects suppress the electron recombination as well as the intermolecular interactions of dye aggregates without the loss of adsorbed dyes, enhancing both the photocurrent density (11.9 → 13.5 mA cm(-2)) and open-circuit voltage (0.67 → 0.72 V). Moreover, the combined surface modification with the F-SAM and the classical coadsorbent further improves the photovoltaic performance in DSCs.

Enhancement of facilitated olefin transport by amino acid in silver-polymer complex membranes.

Silver ions dissolved in a polymer matrix are additionally coordinated by carbonyl oxygens of asparagines and their counter anions interact with cationic sites, resulting in the enhanced activity of the silver ion as an olefin carrier for facilitated olefin transport.