RESUMEN
The gold standard in cryopreservation is still conventional slow freezing of single cells or small aggregates in suspension, although major cell loss and limitation to non-specialised cell types in stem cell technology are known drawbacks. The requirement for rapidly available therapeutic and diagnostic cell types is increasing constantly. In the case of human induced pluripotent stem cells (hiPSCs) or their derivates, more sophisticated cryopreservation protocols are needed to address this demand. These should allow a preservation in their physiological, adherent state, an efficient re-cultivation and upscaling upon thawing towards high-throughput applications in cell therapies or disease modelling in drug discovery. Here, we present a novel vitrification-based method for adherent hiPSCs, designed for automated handling by microfluidic approaches and with ready-to-use potential e.g. in suspension-based bioreactors after thawing. Modifiable alginate microcarriers serve as a growth surface for adherent hiPSCs that were cultured in a suspension-based bioreactor and subsequently cryopreserved via droplet-based vitrification in comparison to conventional slow freezing. Soft (0.35%) versus stiff (0.65%) alginate microcarriers in concert with adhesion time variation have been examined. Findings revealed specific optimal conditions leading to an adhesion time and growth surface (matrix) elasticity dependent hypothesis on cryo-induced damaging regimes for adherent cell types. Deviations from the found optimum parameters give rise to membrane ruptures assessed via SEM and major cell loss after adherent vitrification. Applying the optimal conditions, droplet-based vitrification was superior to conventional slow freezing. A decreased microcarrier stiffness was found to outperform stiffer material regarding cell recovery, whereas the stemness characteristics of rewarmed hiPSCs were preserved.
Asunto(s)
Células Madre Pluripotentes Inducidas , Vitrificación , Alginatos , Criopreservación/métodos , Elasticidad , Congelación , HumanosRESUMEN
PURPOSE: The aim of this study was to investigate the clinical outcome after standardized DMEK using a glass injector. METHODS: A total of 254 patients undergoing DMEK surgery using a disposable DMEK borosilicate glass cartridge system were included in this retrospective study. The mean follow-up time was 13.2 months (SD ± 8.1, range 6-36 months). The used glass cartridge system has an aperture diameter of 1.6 mm and a posterior loading orifice of 4.29 mm. Scanning electron microscopy (SEM) was used for estimation of the surface relief of the glass cartridge and comparison with a standard plastic injector cartridge. RESULTS: Mean endothelial cell count of donor grafts was 2465 cells/mm2 (SD ± 199). After 6 weeks of DMEK endothelial cell count decreased by - 28.6% to 1759 cells/mm2 (SD ± 435) (Wilcoxon p = 0.001) and remained stable at the final follow-up at 1735 cells/mm2 (SD ± 442) (Wilcoxon p = 0.89). SEM showed smoother surface of the glass cartridge in comparison with a plastic cartridge. CONCLUSION: This study showed that this simple and effective DMEK cartridge seems to be a safe and viable device for minimized graft manipulation during DMEK surgery.
Asunto(s)
Lámina Limitante Posterior/cirugía , Queratoplastia Endotelial de la Lámina Limitante Posterior , Endotelio Corneal/trasplante , Distrofia Endotelial de Fuchs/cirugía , Anciano , Anciano de 80 o más Años , Pérdida de Celulas Endoteliales de la Córnea , Queratoplastia Endotelial de la Lámina Limitante Posterior/instrumentación , Queratoplastia Endotelial de la Lámina Limitante Posterior/métodos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios RetrospectivosRESUMEN
The surface charge of a biomaterial represents a promising tool to direct cellular behavior, which is crucial for therapeutic approaches in regenerative medicine. To expand the understanding of how the material surface charge affects protein adsorption and mesenchymal stem cell behavior, differently charged surfaces with zeta potentials spanning from -25 mV to +15 mV were fabricated by the conjugation of poly(amidoamine) to alginate-based hydrogels. We showed that the increase of the biomaterials surface charge resulted in enhanced quantities of biologically available, surface-attached proteins. Since different surface charges were equalized after protein adsorption, mesenchymal stem cells interacted rather with diverse protein compositions instead of different surface features. Besides an enhanced cell attachment to increasingly positively charged surfaces, the cell spreading area and the expression of adhesion-related genes integrin α5 and tensin 1 were found to be increased after adhesion. Moreover, first results indicate a potential impact of the surface charge on mesenchymal stem cell differentiation towards bone and fat cells. The improved understanding of surface charge-related cell behavior has significant impact on the design of biomedical devices and artificial organs.
Asunto(s)
Alginatos/química , Hidrogeles/química , Células Madre Mesenquimatosas/citología , Poliaminas/química , Adsorción , Materiales Biocompatibles/química , Adhesión Celular , Técnicas de Cultivo de Célula , Diferenciación Celular , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Humanos , Integrina alfa5/metabolismo , Microscopía Electrónica de Rastreo , Fenotipo , Espectrometría Raman , Propiedades de Superficie , Tensinas/metabolismo , Ingeniería de TejidosRESUMEN
Cultivation and proliferation of stem cells in three-dimensional (3-D) scaffolds is a promising strategy for regenerative medicine. Mesenchymal stem cells with their potential to differentiate in various cell types, cryopreserved adhesion-based in fabricated scaffolds of biocompatible materials can serve as ready-to-use transplantation units for tissue repair, where pores allow a direct contact of graft cells and recipient tissue without further preparation. A successful cryopreservation of adherent cells depends on attachment and spreading processes that start directly after cell seeding. Here, we analyzed different cultivation times (0.5, 2, 24 h) prior to adhesion-based cryopreservation of human mesenchymal stem cells within alginate-gelatin cryogel scaffolds and its influence on cell viability, recovery and functionality at recovery times (0, 24, 48 h) in comparison to non-frozen control. Analysis with confocal laser scanning microscopy and scanning electron microscopy indicated that 2 h cultivation time enhanced cryopreservation success: cell number, visual cell contacts, membrane integrity, motility, as well as spreading were comparable to control. In contrast, cell number by short cultivation time (0.5 h) reduced dramatically after thawing and expanded cultivation time (24 h) decreased cell viability. Our results provide necessary information to enhance the production and to store ready-to-use transplantation units for application in bone, cartilage or skin regenerative therapy.
Asunto(s)
Técnicas de Cultivo Celular por Lotes/instrumentación , Criopreservación/métodos , Regeneración Tisular Dirigida/instrumentación , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , Ingeniería de Tejidos/instrumentación , Andamios del Tejido , Alginatos/química , Técnicas de Cultivo Celular por Lotes/métodos , Adhesión Celular/fisiología , Técnicas de Cultivo de Célula/instrumentación , Células Cultivadas , Criogeles/química , Diseño de Equipo , Análisis de Falla de Equipo , Gelatina/química , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Humanos , Medicina Regenerativa/instrumentaciónRESUMEN
PURPOSE: To investigate the ultrastructure of the cleavage plane of human cornea after liquid-bubble-prepared tissue for Descemet's membrane endothelial keratoplasty (DMEK). METHODS: Experimental study with scanning electron microscopy (SEM) and block-face SEM of 18 corneal specimens. Fresh human research donor corneoscleral discs (n = 12) were prepared with liquid-bubble technique or examined as untreated controls (n = 3). In addition, Descemet's membrane samples, n = 3, were obtained in DMEK surgery. RESULTS: The cleavage plane after liquid-bubble Descemet's membrane (DM) preparation was consistently located between interfacial matrix and posterior stromal collagen lamellae, providing a largely smooth surface exposing the amorphous interfacial zone without any significant amounts of adherent stromal remnants. No demarcation of a distinct pre-DM layer could be detected. CONCLUSION: The DMEK graft preparation performed by liquid-bubble technique showed a smooth cleavage plane and could not reveal any demarcation of a distinct pre-DM layer.
Asunto(s)
Enfermedades de la Córnea/cirugía , Lámina Limitante Posterior/ultraestructura , Queratoplastia Endotelial de la Lámina Limitante Posterior/métodos , Endotelio Corneal/trasplante , Microscopía Electrónica de Rastreo/métodos , Donantes de Tejidos , Recolección de Tejidos y Órganos/métodos , Anciano , Anciano de 80 o más Años , Lámina Limitante Posterior/cirugía , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
One of the major environmental problems is a global metal contamination. Heavy metals are nonbiodegradable and tend to accumulate in living organisms. Therefore, searching for biocompatible materials with enhanced sorption capabilities for selective removal of toxic elements from complex environments, low cost, ease of operation, and large available quantities that meet all requirements of the Green Chemistry concept is a current engineering and analytical task. We present a comprehensive study toward construction of an advanced biomembrane-based technology for recovery of several heavy metals and ruthenium by microdimensional alginate scaffolds. The chosen design of alginate scaffolds and their operational conditions were monitored during removal of Cd(II), Co(II), Pb(II), As(III), and Ru(III) in modeled aqueous solutions, cell culture medium, and in the presence of A549 lung cells by a tandem of biological (live/dead cell test), physical nanoanalytical (TEM/EDX, SEM/EDX), and chemical (FT-IR, HR-ICP-MS) assays. More precisely, the impact of certain experimental conditions, viz., medium acidity and matrix effects on sorption capacity of the above-mentioned elements, was investigated in detail. Remarkably, a different attachment behavior during adsorption of chosen elements by alginate scaffolds was observed. In addition, we revealed an essential concentration dependent effect of loaded heavy metals and ruthenium on cultivated cells. The obtained data allow us to gain a deeper insight into the interactions occurring in the studied biomaterial-inorganic system. Moreover, the obtained dependencies can be widely used for the development of alginate-based membrane technology employed for the protection of environmental and biological samples from the toxic pollutants.
Asunto(s)
Alginatos/farmacología , Materiales Biocompatibles/farmacología , Metales Pesados/farmacología , Células A549 , Adsorción , Alginatos/química , Materiales Biocompatibles/química , Supervivencia Celular/efectos de los fármacos , Humanos , Ensayo de Materiales , Metales Pesados/química , Tamaño de la Partícula , Células Tumorales CultivadasRESUMEN
In this study, we prepared hydrogel scaffolds for tissue engineering by computer-assisted extrusion three-dimensional (3D) printing with photocured (λ = 445 nm) hyaluronic acid glycidyl methacrylate (HAGM). The developed product was compared with the polylactic-co-glycolic acid (PLGA) scaffolds generated by means of the original antisolvent 3D printing methodology. The cytotoxicity and cytocompatibility of the scaffolds were analyzed in vitro by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide tests, flow cytometry, and scanning electron microscopy. Anti-inflammatory and proangiogenic properties of the scaffolds were evaluated in the dorsal skinfold chamber mouse model by means of intravital fluorescence microscopy, histology, and immunohistochemistry throughout an observation period of 14 days. In vitro, none of the scaffolds revealed cytotoxicity on days 1, 2, and 5 after seeding with umbilical cord-derived multipotent stromal cells, and the primary cell adhesion to the surface of HAGM scaffolds was low. In vivo, implanted HAGM scaffolds showed enhanced vascularization and host tissue ingrowth, and the inflammatory response to them was less pronounced compared with PLGA scaffolds. The results indicate excellent biocompatibility and vascularization capacity of the developed 3D printed HAGM scaffolds and position them as strong candidates for advanced tissue engineering applications.
Asunto(s)
Hidrogeles , Ingeniería de Tejidos , Adhesivos , Animales , Antiinflamatorios , Compuestos Epoxi , Ácido Hialurónico , Metacrilatos , Ratones , Impresión Tridimensional , Andamios del TejidoRESUMEN
Human induced pluripotent stem cells (hiPSCs) are an important tool for research and regenerative medicine, but their efficient cryopreservation remains a major challenge. The current gold standard is slow-rate freezing of dissociated colonies in suspension, but low recovery rates limit immediate post-thawing applicability. We tested whether ultrafast cooling by adherent vitrification improves post-thawing survival in a selection of hiPSCs and small molecule neural precursor cells (smNPCs) from Parkinson's disease and controls. In a dual-center study, we compared the results by immunocytochemistry (ICC), fluorescence-activated cell sorting analysis, and RNA-sequencing (RNA-seq). Adherent vitrification was achieved in the so-called TWIST substrate, a device combining cultivation, vitrification, storage, and post-thawing cultivation. Adherent vitrification resulted in preserved confluency and significantly higher cell numbers, and viability at day 1 after thawing, while results were not significantly different at day 4 after thawing. RNA-seq and ICC of hiPSCs revealed no change in gene expression and pluripotency markers, indicating that physical damage of slow-rate freezing disrupts cellular membranes. Scanning electron microscopy showed preserved colony integrity by adherent vitrification. Experiments using smNPCs demonstrated that adherent vitrification is also applicable to neural derivatives of hiPSCs. Our data suggest that, compared to the state-of-the-art slow-rate freezing in suspension, adherent vitrification is an improved cryopreservation technique for hiPSCs and derivatives. Stem Cells Translational Medicine 2019;8:247&259.
Asunto(s)
Células Madre Pluripotentes Inducidas/citología , Criopreservación/métodos , Congelación , Humanos , Células-Madre Neurales/citología , VitrificaciónRESUMEN
Pathophysiological conditions, such as myocardial infarction and mechanical overload affect the mammalian heart integrity, leading to a stiffened fibrotic tissue. With respect to the pathophysiology of cardiac fibrosis but also in the limelight of upcoming approaches of cardiac cell therapy it is of interest to decipher the interaction of cardiomyocytes with fibrotic matrix. Therefore, we designed a hydrogel-based model to engineer fibrotic tissue in vitro as an approach to predict the behavior of cardiomyocytes facing increased matrix rigidity. Here, we generated pure induced pluripotent stem cell-derived cardiomyocytes and cultured them on engineered polyacrylamide hydrogels matching the elasticities of healthy as well as fibrotic cardiac tissue. Only in cardiomyocytes cultured on matrices with fibrotic-like elasticity, transcriptional profiling revealed a substantial up-regulation of a whole panel of cardiac fibrosis-associated transcripts, including collagen I and III, decorin, lumican, and periostin. In addition, matrix metalloproteinases and their inhibitors, known to be essential in cardiac remodeling, were found to be elevated as well as insulin-like growth factor 2. Control experiments with primary cardiac fibroblasts were analyzed and did not show comparable behavior. In conclusion, we do not only present a snapshot on the transcriptomic fingerprint alterations in cardiomyocytes under pathological conditions but also provide a new reproducible approach to study the effects of fibrotic environments to various cell types. STATEMENT OF SIGNIFICANCE: The ageing population in many western countries is faced with an increasing burden of ageing-related diseases such as heart failure which is associated with cardiac fibrosis. A deeper understanding of the interaction of organotypic cells with altered extracellular matrix mechanical properties is of pivotal importance to understand the underlying mechanisms. Here, we present a strategy to combine hydrogel matrices with induced pluripotent stem cell derived cardiomyocytes to study the effect of matrix stiffening on these cells. Our findings suggest an active role of matrix stiffening on cardiomyocyte function and heart failure progression.
Asunto(s)
Proteínas de la Matriz Extracelular/biosíntesis , Matriz Extracelular/metabolismo , Hidrogeles/química , Miocitos Cardíacos/metabolismo , Regulación hacia Arriba , Animales , Línea Celular , Fibrosis , Ratones , Miocitos Cardíacos/patologíaRESUMEN
Embryonic Stem (ES) cells-derived cardiomyocytes can possibly be applied for cell therapy of diseases such as heart failure. Biodegradable scaffolds will significantly improve the expansion of sufficient functional ES cell-derived cardiomyocytes and may also increase the survival rate of cardiomyocytes after their transplantation. In the present study, we cultivated cardiomyocytes isolated from a transgenic a-myosin heavy chain (alpha-MHC) ES cell lineage expressing both puromycin resistance and enhanced green fluorescent protein (EGFP) under the control of the alpha-MHC promoter in macroporous gelatine microspheres using small-scale bioreactors and proved that cardiomyocytes function after their cultivation in micropsperes. The average number of cultivated cells per microsphere was optimised once the most suitable agitation conditions and the optimal timeframe of cultivation were identified. Our study shows that 72% of CultiSpher-S beads were colonised by cardiomyocytes under optimal conditions. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) showed that colonization of the beads was not limited to the surface, but that cells also invaded the inner surfaces of the microspheres. Electrophysiological experiments demonstrated that the action potentials (APs) of alpha-MHC(+) cardiomyocytes entrapped in microspheres were identical to action potentials of control cells. This attractive approach for cultivation and expansion of functional cardiomyocytes in biodegradable macroporous may offer a perspective for higher transplantation efficiencies of ES cell-derived cardiomyocytes.
Asunto(s)
Materiales Biocompatibles/metabolismo , Células Madre Embrionarias/citología , Microesferas , Miocitos Cardíacos/citología , Potenciales de Acción , Animales , Línea Celular , Células Madre Embrionarias/ultraestructura , Ratones , Microscopía Confocal , Miocitos Cardíacos/ultraestructura , PorosidadRESUMEN
We describe the manufacture of highly stable and elastic alginate membranes with good cell adhesivity and adjustable permeability. Clinical grade, ultra-high viscosity alginate is gelled by diffusion of Ba2+ followed by use of the "crystal gun" [Zimmermann H. et al., Fabrication of homogeneously cross-linked, functional alginate microcapsules validated by NMR-, CLSM- and AFM-imaging. Biomaterials 2003;24:2083-96]. Burst pressure of well-hydrated membranes is between 34 and 325kPa depending on manufacture and storage details. Water flows induced by sorbitol and raffinose (probably diffusional) are lower than those caused by PEG 6000, which may be related to a Hagen-Poiseuille flow. Hydraulic conductivity, L(p), from PEG-induced flows ranges between 2.4x10(-12) and 6.5x10(-12) m Pa(-1)s(-1). Hydraulic conductivity measured with hydrostatic pressure up to 6 kPa is 2-3 orders of magnitude higher and decreases with increasing pressure to about 3x10(-10) m Pa(-1)s(-1) at 4kPa. Mechanical introduction of 200 microm-diameter pores increases hydraulic conductivity dramatically without loss of mechanical stability or flexibility. NMR imaging with Cu2+ as contrast agent shows a layered structure in membranes cross-linked for 2h. Phase contrast and atomic force microscopy in liquid environment reveals surface protrusions and cavities correlating with steps of the production process. Murine L929 cells adhere strongly to the rough surface of crystal-bombarded membranes. NaCl-mediated membrane swelling can be prevented by partial replacement of salt with sorbitol allowing cell culture on the membranes.
Asunto(s)
Alginatos/química , Materiales Biocompatibles/química , Membranas Artificiales , Animales , Bario , Fenómenos Biomecánicos , Cápsulas , Adhesión Celular , Línea Celular , Fenómenos Químicos , Química Física , Reactivos de Enlaces Cruzados , Difusión , Elasticidad , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Presión Hidrostática , Espectroscopía de Resonancia Magnética , Ensayo de Materiales , Ratones , Microscopía de Fuerza Atómica , Microscopía Confocal , Microscopía Electrónica de Rastreo , Modelos Teóricos , Ósmosis , Propiedades de Superficie , AguaRESUMEN
One of the often reported artefacts during cell preparation to scanning electron microscopy (SEM) is the shrinkage of cellular objects, that mostly occurs at a certain time-dependent stage of cell drying. Various methods of drying for SEM, such as critical point drying, freeze-drying, as well as hexamethyldisilazane (HMDS)-drying, were usually used. The latter becomes popular since it is a low cost and fast method. However, the correlation of drying duration and real shrinkage of objects was not investigated yet. In this paper, cell shrinkage at each stage of preparation for SEM was studied. We introduce a shrinkage coefficient using correlative light microscopy (LM) and SEM of the same human mesenchymal stem cells (hMSCs). The influence of HMDS-drying duration on the cell shrinkage is shown: the longer drying duration, the more shrinkage is observed. Furthermore, it was demonstrated that cell shrinkage is inversely proportional to cultivation time: the longer cultivation time, the more cell spreading area and the less cell shrinkage. Our results can be applicable for an exact SEM quantification of cell size and determination of cell spreading area in engineering of artificial cellular environments using biomaterials. SCANNING 38:625-633, 2016. © 2016 Wiley Periodicals, Inc.
Asunto(s)
Microscopía Electrónica de Rastreo/métodos , Compuestos de Organosilicio , Artefactos , Adhesión Celular , Tamaño de la Célula , Células Cultivadas , HumanosRESUMEN
Cardiomyocytes (CMs) from induced pluripotent stem (iPS) cells mark an important achievement in the development of in vitro pharmacological, toxicological and developmental assays and in the establishment of protocols for cardiac cell replacement therapy. Using CMs generated from murine embryonic stem cells and iPS cells we found increased cell-matrix interaction and more matured embryoid body (EB) structures in iPS cell-derived EBs. However, neither suspension-culture in form of purified cardiac clusters nor adherence-culture on traditional cell culture plastic allowed for extended culture of CMs. CMs grown for five weeks on polystyrene exhibit signs of massive mechanical stress as indicated by α-smooth muscle actin expression and loss of sarcomere integrity. Hydrogels from polyacrylamide allow adapting of the matrix stiffness to that of cardiac tissue. We were able to eliminate the bottleneck of low cell adhesion using 2,5-Dioxopyrrolidin-1-yl-6-acrylamidohexanoate as a crosslinker to immobilize matrix proteins on the gels surface. Finally we present an easy method to generate polyacrylamide gels with a physiological Young's modulus of 55 kPa and defined surface ligand, facilitating the culture of murine and human iPS-CMs, removing excess mechanical stresses and reducing the risk of tissue culture artifacts exerted by stiff substrates.
Asunto(s)
Materiales Biocompatibles/química , Técnicas de Cultivo de Célula/métodos , Reactivos de Enlaces Cruzados/química , Hidrogeles/química , Células Madre Pluripotentes Inducidas/citología , Miocitos Cardíacos/citología , Resinas Acrílicas/química , Animales , Adhesión Celular , Diferenciación Celular , Células Cultivadas , Módulo de Elasticidad , Cuerpos Embrioides/citología , Proteínas de la Matriz Extracelular/química , Humanos , Proteínas Inmovilizadas/química , Ratones , Modelos Moleculares , Sarcómeros/ultraestructuraRESUMEN
Miniaturization and parallelization of cell culture procedures are in focus of research in order to develop test platforms with low material consumption and increased standardization for toxicity and drug screenings. The cultivation in hanging drops (HDs) is a convenient and versatile tool for biological applications and represents an interesting model system for the screening applications due to its uniform shape, the advantageous gas supply, and the small volume. However, its application has so far been limited to non-adherent and aggregate forming cells. Here, we describe for the first time the proof-of-principle regarding the adherent cultivation of human embryonic stem cells in HD. For this microcarriers were added to the droplet as dynamic cultivation surfaces resulting in a maintained pluripotency and proliferation capacity for 10 days. This enables the HD technique to be extended to the cultivation of adherence-dependent stem cells. Also, the possible automation of this method by implementation of liquid handling systems opens new possibilities for miniaturized screenings, the improvement of cultivation and differentiation conditions, and toxicity and drug development.
RESUMEN
While therapeutic cell transplantations using progenitor cells are increasingly evolving towards phase I and II clinical trials and chemically defined cell culture is established, standardization in biobanking is still in the stage of infancy. In this study, the EU FP6-funded CRYSTAL (CRYo-banking of Stem cells for human Therapeutic AppLication) consortium aimed to validate novel Standard Operating Procedures (SOPs) to perform and validate xeno-free and chemically defined cryopreservation of human progenitor cells and to reduce the amount of the potentially toxic cryoprotectant additive (CPA) dimethyl sulfoxide (DMSO). To achieve this goal, three human adult progenitor and stem cell populations-umbilical cord blood (UCB)-derived erythroid cells (UCB-ECs), UCB-derived endothelial colony forming cells (UCB-ECFCs), and adipose tissue (AT)-derived mesenchymal stromal cells (AT-MSCs)-were cryopreserved in chemically defined medium supplemented with 10% or 5% DMSO. Cell recovery, cell repopulation, and functionality were evaluated postthaw in comparison to cryopreservation in standard fetal bovine serum (FBS)-containing freezing medium. Even with a reduction of the DMSO CPA to 5%, postthaw cell count and viability assays indicated no overall significant difference versus standard cryomedium. Additionally, to compare cellular morphology/membrane integrity and ice crystal formation during cryopreservation, multiphoton laser-scanning cryomicroscopy (cryo-MPLSM) and scanning electron microscopy (SEM) were used. Neither cryo-MPLSM nor SEM indicated differences in membrane integrity for the tested cell populations under various conditions. Moreover, no influence was observed on functional properties of the cells following cryopreservation in chemically defined freezing medium, except for UCB-ECs, which showed a significantly reduced differentiation capacity after cryopreservation in chemically defined medium supplemented with 5% DMSO. In summary, these results demonstrate the feasibility and robustness of standardized xeno-free cryopreservation of different human progenitor cells and encourage their use even more in the field of tissue-engineering and regenerative medicine.
Asunto(s)
Células Madre Adultas/citología , Células Madre Adultas/efectos de los fármacos , Criopreservación/métodos , Crioprotectores/farmacología , Tejido Adiposo/citología , Adulto , Animales , Bovinos , Separación Celular , Forma de la Célula/efectos de los fármacos , Células Cultivadas , Ensayo de Unidades Formadoras de Colonias , Microscopía por Crioelectrón , Medio de Cultivo Libre de Suero , Células Endoteliales/citología , Células Endoteliales/efectos de los fármacos , Células Endoteliales/ultraestructura , Células Eritroides/citología , Células Eritroides/efectos de los fármacos , Células Eritroides/ultraestructura , Sangre Fetal/citología , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/ultraestructura , Microscopía de Fluorescencia por Excitación MultifotónicaRESUMEN
Specific transport of anti-cancer drugs into tumor cells may result in increased therapeutic efficacy and decreased adverse events. Expression of alphavbeta3 integrin is enhanced in various types of cancer and monoclonal antibodies (mAbs) directed against alphavbeta3 integrins hold promise for anti-cancer therapy. DI17E6 is a monoclonal antibody directed against alphav integrins that inhibits growth of melanomas in vitro and in vivo and inhibits angiogenesis due to interference with alphavbeta3 integrins. Here, DI17E6 was covalently coupled to human serum albumin nanoparticles. Resulting nanoparticles specifically targeted alphavbeta3 integrin positive melanoma cells. Moreover, doxorubicin loaded DI17E6 nanoparticles showed increased cytotoxic activity in alphavbeta3-positive melanoma cells than the free drug. Therefore, DI17E6-coupled human serum albumin nanoparticles represent a potential delivery system for targeted drug transport into alphavbeta3-positive cells.
Asunto(s)
Anticuerpos Monoclonales Humanizados/química , Doxorrubicina/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , Integrina alfaV/inmunología , Nanopartículas , Albúmina Sérica/química , Anticuerpos Monoclonales Humanizados/metabolismo , Antineoplásicos/química , Antineoplásicos/metabolismo , Antineoplásicos/uso terapéutico , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Adhesión Celular , Línea Celular Tumoral , Supervivencia Celular , Doxorrubicina/metabolismo , Portadores de Fármacos/metabolismo , Humanos , Ensayo de Materiales , Neoplasias/tratamiento farmacológico , Albúmina Sérica/metabolismo , Compuestos de Sulfhidrilo/químicaRESUMEN
The commonly applied cryopreservation protocols routinely used in laboratories worldwide were developed for simple cell suspensions, and their application to complex systems, such as cell monolayers, tissues, or biosynthetic constructs, is not straightforward. In particular for monolayer cultures, cell detachment and membrane damage are often observed after cryopreservation. In this work, combined strategies for the cryopreservation of cells attached to Matrigel-coated well plate's surfaces were investigated based on cell entrapment in clinicalgrade, ultra-high viscosity alginate using two cell lines, neuroblastoma N2a and colon adenocarcinoma Caco-2, with distinct structural and functional characteristics. As the cryopreservation medium, serum-free CryoStor solution was compared with serum-supplemented culture medium, both containing 10% DMSO. Using culture medium, entrapment beneath an alginate layer was needed to improve cell recovery by minimizing membrane damage and cell detachment after thawing; nevertheless, up to 50% cell death still occurred within 24 h after thawing. The use of CryoStor solution represented a considerable improvement of the cryopreservation process for both cell lines, allowing the maintenance of high postthaw membrane integrity as well as full recovery of metabolic activity and differentiation capacity within 24 h postthawing; in this case, entrapment beneath an alginate layer did not confer further protection to cryopreserved Caco-2 cells, but was crucial for maintenance of attachment and integrity of N2a neuronal networks.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Criopreservación/métodos , Crioprotectores/farmacología , Células CACO-2 , Supervivencia Celular/efectos de los fármacos , Citoprotección/fisiología , Calefacción , HumanosRESUMEN
Recent advances in cell-based therapies require new approaches for cell cryopreservation, capable of dealing with large number of samples and providing specific conditions for each cell type. Reduction of sample volume from the commonly used 1 mL to 25 microL in 30-well micro-cryosubstrates improves cryopreservation by allowing automation, data handling and access to individual wells without thawing the whole cryosubstrate. This system was evaluated for the storage of Caco-2 colon adenocarcinoma cells, which differentiate spontaneously after long-term culture. The impact of the cryosample small volume upon post-thawing membrane integrity of the cells and their capacity to proliferate and differentiate was studied. Two different cryoprotectants commonly employed, dimethyl sulfoxide (Me(2)SO) and glycerol, were evaluated as well as the possibility of decreasing their concentration from the 10% concentration, usually used, down to 3% (v/v). The process automation by pipette robotic addition of the cryoprotectant to the micro-cryosubstrates was also evaluated. The micro-cryosubstrates have proven to be at least as efficient as typical 1 mL cryovials for cryopreservation of Caco-2 cells using either Me(2)SO or glycerol. Compared to the manual process, the automatic addition of glycerol to the micro-cryosubstrates allowed higher cell viabilities after thawing while with Me(2)SO no significant changes were observed. Me(2)SO has shown to be more effective than glycerol in maintaining high post-thaw cell membrane integrity, either in micro-cryosubstrates or cryovials, for any of the concentrations tested. The ability of Me(2)SO in maintaining high cell membrane integrity post-thawing was confirmed by long-term (up to 22 days) proliferation and differentiation studies performed with cells cultured immediately after thawing.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Criopreservación/métodos , Células Epiteliales/citología , Células Epiteliales/fisiología , Manejo de Especímenes/métodos , Células CACO-2 , Diferenciación Celular , Proliferación Celular , Supervivencia Celular , Criopreservación/instrumentación , Humanos , Miniaturización , Manejo de Especímenes/instrumentaciónRESUMEN
Electrofusion of tumour and dendritic cells (DCs) is a promising approach for production of DC-based anti-tumour vaccines. Although human DCs are well characterised immunologically, little is known about their biophysical properties, including dielectric and osmotic parameters, both of which are essential for the development of efficient electrofusion protocols. In the present study, human DCs from the peripheral blood along with a tumour cell line used as a model fusion partner were examined by means of time-resolved cell volumetry and electrorotation. Based on the biophysical cell data, the electrofusion protocol could be rapidly optimised with respect to the sugar composition of the fusion medium, duration of hypotonic treatment, frequency range for stable cell alignment, and field strengths of breakdown pulses triggering membrane fusion. The hypotonic electrofusion consistently gave a tumour-DC hybrid rate of up to 19%, as determined by counting dually labelled fluorescent hybrids in a microscope. This fusion rate is nearly twice as high as that usually reported in the literature for isotonic media. The experimental findings and biophysical approach presented here are generally useful for the development of efficient electrofusion protocols, especially for rare and valuable human cells.