Using size-exclusion for improved extraction of trace organic compounds from landfill leachate.

Pharmaceuticals, plasticisers and other trace organic contaminants have been reported in landfill leachates, with most methods using hydrophilic-lipophilic balance cartridges for solid phase extraction. However, leachate has a high organic load and can quickly coat the cartridge media and prevent target compounds from being extracted. There are several solid phase extraction cartridges that offer size exclusion in addition to adsorption, where only small molecules are allowed to diffuse into the resin pores where adsorption in happening. Three cartridges with size exclusion properties were evaluated in comparison with hydrophilic-lipophilic balance cartridges for extraction of several trace organic contaminants spiked into landfill leachate. All three cartridges with size exclusion properties showed some improvement in extraction compared with hydrophilic-lipophilic balance, although the differences were not statistically significant at 95% confidence interval. Nevertheless, media with size-exclusion properties offers a viable alternative to hydrophilic-lipophilic balance for extracting small molecules of trace organics from complex environmental matrices.

Methods of Responsibly Managing End-of-Life Foams and Plastics Containing Flame Retardants: Part II.

This is Part II of a review covering the wide range of issues associated with all aspects of the use and responsible disposal of foam and plastic wastes containing toxic or potentially toxic flame retardants. We identify basic and applied research needs in the areas of responsible collection, pretreatment, processing, and management of these wastes. In Part II, we explore alternative technologies for the management of halogenated flame retardant (HFR) containing wastes, including chemical, mechanical, and thermal processes for recycling, treatment, and disposal.

Methods of Responsibly Managing End-of-Life Foams and Plastics Containing Flame Retardants: Part I.

Flame retardants (FRs) are added to foams and plastics to comply with flammability standards and test requirements in products for household and industrial uses. When these regulations were implemented, potential health and environmental impacts of FR use were not fully recognized or understood. Extensive research in the past decades reveal that exposure to halogenated FRs, such as those used widely in furniture foam, is associated with and/or causally related to numerous health effects in animals and humans. While many of the toxic FRs have been eliminated and replaced by other FRs, existing products containing toxic or potentially toxic chemical FRs will remain in use for decades, and new products containing these and similar chemicals will permeate the environment. When such products reach the end of their useful life, proper disposal methods are needed to avoid health and ecological risks. To minimize continued human and environmental exposures to hazardous FR chemicals from discarded products, waste management technologies and processes must be improved. This review discusses a wide range of issues associated with all aspects of the use and responsible disposal of wastes containing FRs, and identifies basic and applied research needs in the areas of responsible collection, pretreatment, processing, and management of these wastes.

Characterisation of ultraviolet-absorbing recalcitrant organics in landfill leachate for treatment process optimisation.

Organics in leachate from municipal solid waste landfills are notoriously difficult to treat by biological processes. These organics have high ultraviolet absorbance and can interfere with the ultraviolet disinfection process at the wastewater treatment plant that receives leachate if the leachate flow contribution is large enough. With more wastewater treatment plants switching to ultraviolet disinfection, landfills face increased pressure to treat leachate further. This study used size exclusion chromatography, fluorescence spectroscopy and ultraviolet/Vis spectrophotometry to characterise the bulk organic matter in raw landfill leachate and the biorecalcitrant organic matter in biologically treated leachate from the same site. The results indicate that biorecalcitrant organics have the polyphenolic absorbance peak at 280 nm, fluorescence peak at 280 nm excitation and 315 nm emission, and molecular size range of 1000-7000 Da, all of which are consistent with lignin. The lignin-like nature of biorecalcitrant leachate organics is supported by the fact that 30%-50% of municipal solid waste consists of plant debris and paper products. These findings shed light on the nature of biorecalcitrant organics in leachate and will be useful for the design of leachate treatment processes and further research on leachate treatment methods.

Re-engineering an artificial sweetener: transforming sucralose residuals in water via advanced oxidation.

Sucralose is an artificial sweetener persistently present in wastewater treatment plant effluents and aquatic environments impacted by human activity. It has a potential to accumulate in the water cycle due to its resistance to common water and wastewater treatment processes. This study examined UV/H2O2 advanced oxidation and found that hydroxyl substitution of the chlorine atoms on the sucralose molecule can form a carbohydrate consisting of fructose and sugar alcohol, very similar to environmentally benign sucrose. The second-order reaction rate constant for loss of parent molecule via reaction with hydroxyl radical was determined to be (1.56 ± 0.03)·10(9) M(-1)s(-1). The degradation pathway involves substitution of a single chlorine by a hydroxyl group, with cyclic moiety being a preferential site for initial dechlorination. Further reaction leads to full dechlorination of the molecule, presumably via hydroxyl group substitution as well. No direct photolysis by UV wavelengths above 200 nm was observed. Because of its photostability when exposed to UV wavelengths ≥200 nm, known stability with ozone, limits of quantification by mass spectrometry close to or below environmental concentrations (<5 µg/L) without preconcentration, and otherwise stable nature, sucralose can be used as an in situ hydroxyl radical probe for UV-based and ozone-based AOP processes. As a compound safe for human consumption, sucralose makes a suitable full scale hydroxyl radical probe fit even for drinking water treatment plant applications. Its main drawback as a probe is lack of UV detection and as a result a need for mass spectrometry analysis.

Degradation of antibiotic activity during UV/H2O2 advanced oxidation and photolysis in wastewater effluent.

Trace levels of antibiotics in treated wastewater effluents may present a human health risk due to the rise of antibacterial activity in the downstream environments. Advanced oxidation has a potential to become an effective treatment technology for transforming trace antibiotics in wastewater effluents, but residual or newly generated antibacterial properties of transformation products are a concern. This study demonstrates the effect of UV photolysis and UV/H2O2 advanced oxidation on transformation of 6 antibiotics, each a representative of a different structural class, in pure water and in two different effluents and reports new or confirmatory photolysis quantum yields and hydroxyl radical rate constants. The decay of the parent compound was monitored with HPLC/ITMS, and the corresponding changes in antibacterial activity were measured using bacterial inhibition assays. No antibacterially active products were observed following treatment for four of the six antibiotics (clindamycin, ciprofloxacin, penicillin-G, and trimethoprim). The remaining two antibiotics (erythromycin and doxycycline) showed some intermediates with antibacterial activity at low treatment doses. The antibacterially active products lost activity as the UV dose increased past 500 mJ/cm(2). Active products were observed only in wastewater effluents and not in pure water, suggesting that complex secondary reactions controlled by the composition of the matrix were responsible for their formation. This outcome emphasizes the importance of bench-scale experiments in realistic water matrices. Most importantly, the results indicate that photosensitized processes during high dose wastewater disinfection may be creating antibacterially active transformation products from some common antibiotics.

Enhanced biodegradation of carbamazepine after UV/H2O2 advanced oxidation.

Carbamazepine is one of the most persistent pharmaceutical compounds in wastewater effluents due to its resistance to biodegradation-based conventional treatment. Advanced oxidation can efficiently degrade carbamazepine, but the toxicity and persistence of the oxidation products may be more relevant than the parent. This study sets out to determine whether the products of advanced oxidation of carbamazepine can be biotransformed and ultimately mineralized by developing a novel methodology to assess these sequential treatment processes. The methodology traces the transformation products of the (14)C-labeled carbamazepine during UV/hydrogen peroxide advanced oxidation and subsequent biotransformation by mixed, undefined cultures using liquid scintillation counting and liquid chromatography with radioactivity, mass spectrometry, and UV detectors. The results show that the oxidation byproducts of carbamazepine containing a hydroxyl or carbonyl group can be fully mineralized by a mixed bacterial inoculum. A tertiary treatment approach that includes oxidation and biotransformation has the potential to synergistically mineralize persistent pharmaceutical compounds in wastewater treatment plant effluents. The methodology developed for this study can be applied to assess the mineralization potential of other persistent organic contaminants.

Occurrence of pharmaceuticals and plasticizers in leachate from municipal landfills of different age.

Contaminants of emerging concern (CECs), such as pharmaceuticals and plasticizers, are present in leachate due to disposal of pharmaceuticals and plastic waste. Leachate is usually released to publicly owned treatment works, but CECs could pass through and be discharged into water resources. Landfills generate leachate for many years after closure, but it is currently unknown whether CECs continue to leach over time or dissipate soon after the waste is deposited. Leachate samples from four domestic landfills with various closure status in North Carolina, United States, have been collected from summer 2019 to summer 2020 (n = 36). Samples were analyzed for 13 pharmaceuticals (7 detected), and 3 plasticizers (2 detected). Carbamazepine and ibuprofen were detected in 100% of samples at respective median concentrations of 45 and 14,867 ng/L in open cells and 100 and 3,049 ng/L in cells closed for > 13 years. 17α-ethinylestradiol, acetaminophen, bisphenol A, doxycycline, and metformin were also frequently detected at concentrations spanning over 5 orders of magnitude between the compounds. Carbamazepine was present at significantly higher concentrations in older leachate (p < 0.1), while acetaminophen, doxycycline and bisphenol S were found at significantly lower concentrations. Lower concentration of bisphenol S is likely related to its usage pattern and not to its attenuation in the landfill. This study showed that leachate could be a source of CECs many years after closure. Thus, the transport of these compounds with landfill leachate is expected to persist for as long as leachate is generated in the landfill.

Significant improvement in biodegradability of a real Optical Brightening Agent (OBA) wastewater using small doses of Fenton's reagent.

Optical Brightening Agent (OBA) wastewater (OBAW) has been reported to be highly resistant to biodegradation. In this study, a real OBAW from an industry which was already treated using primary and secondary treatments (residual COD of secondary clarifier overflow (SCO): 3400-3700 mgL-1) was further treated by Fenton's treatment (FT). Zahn-Wellens biodegradability test revealed that using small doses of H2O2 and Fe+2, the biodegradability of SCO improved to 90% as compared to ∼18% without FT. UV-Vis analysis revealed that ca. 80% of initially present OBAs were removed by treatment sequence outlined in this study. Biodegradability study on individual raw wastewaters from four types of OBAs (designated OBA-TS, OBA-DS-U, OBA-HS, and OBA-DS-D) being manufactured at the time of this study, revealed that OBA-TS wastewater was the most biodegradable (>95% biodegradability) followed by OBA-DS-U (∼60%), OBA-HS (∼20%), and OBA-DS-D (<5%). Application of FT improved the biodegradability of these streams as: OBA-DS-U (∼70%), OBA-HS (∼60%), and OBA-DS-D (∼50%). A treatment sequence consisting of waste coal dust (WCD) pretreatment-FT-biodegradation is a novel, economical, and sustainable approach to treating highly recalcitrant OBA wastewater.

Biodegradability of iopromide products after UV/H2O2 advanced oxidation.

Iopromide is an X-ray and MRI contrast agent that is virtually non-biodegradable and persistent through typical wastewater treatment processes. This study determined whether molecular transformation of iopromide in a UV/H2O2 advanced oxidation process (AOP) can result in biodegradable products. The experiments used iopromide labeled with carbon-14 on the aromatic ring to trace degradation of iopromide through UV/H2O2 advanced oxidation and subsequent biodegradation. The biotransformation assay tracked the formation of radiolabeled (14)CO2 which indicated full mineralization of the molecule. The results indicated that AOP formed biodegradable iopromide products. There was no (14)C released from the pre-AOP samples, but up to 20% of all radiolabeled carbon transformed into (14)CO2 over the course of 42 days of biodegradation after iopromide was exposed to advanced oxidation (compared to 10% transformation in inactivated post-AOP controls). In addition, the quantum yield of photolysis of iopromide was determined using low pressure (LP) and medium pressure (MP) mercury lamps as 0.069 ± 0.005 and 0.080 ± 0.007 respectively. The difference in the quantum yields for the two UV sources was not statistically significant at the 95% confidence interval (p = 0.08), which indicates the equivalency of using LP or MP UV sources for iopromide treatment. The reaction rate between iopromide and hydroxyl radicals was measured to be (2.5 ± 0.2) × 10(9) M(-1) s(-1). These results indicate that direct photolysis is a dominant degradation pathway in UV/H2O2 AOP treatment of iopromide. Other iodinated contrast media may also become biodegradable after exposure to UV or UV/H2O2.

Degradation pathways of lamotrigine under advanced treatment by direct UV photolysis, hydroxyl radicals, and ozone.

Lamotrigine is recently recognized as a persistent pharmaceutical in the water environment and wastewater effluents. Its degradation was studied under UV and ozone advanced oxidation treatments with reaction kinetics of lamotrigine with ozone (≈4 M(-1)s(-1)), hydroxyl radical [(2.1 ± 0.3) × 10(9)M(-1)s(-1)] and by UV photolysis with low and medium pressure mercury vapor lamps [quantum yields ≈0 and (2.7 ± 0.4)× 10(-4) respectively] determined. All constants were measured at pH 6 and at temperature ≈20°C. The results indicate that lamotrigine is slow to respond to direct photolysis or oxidation by ozone and no attenuation of the contaminant is expected in UV or ozone disinfection applications. The compound reacts rapidly with hydroxyl radicals indicating that advanced oxidation processes would be effective for its treatment. Degradation products were identified under each treatment process using accurate mass time-of-flight spectrometry and pathways of decay were proposed. The main transformation pathways in each process were: dechlorination of the benzene ring during direct photolysis; hydroxyl group addition to the benzene ring during the reaction with hydroxyl radicals; and triazine ring opening after reaction with ozone. Different products that form in each process may be to a varying degree less environmentally stable than the parent lamotrigine. In addition, a novel method of ozone quenching without addition of salts is presented. The new quenching method would allow subsequent mass spectrometry analysis without a solid phase extraction clean-up step. The method involves raising the pH of the sample to approximately 10 for a few seconds and lowering it back and is therefore limited to applications for which temporary pH change is not expected to affect the outcome of the analysis.

Identifying the factors that influence the reactivity of effluent organic matter with hydroxyl radicals.

Advanced oxidation processes (AOPs) are an effective treatment technology for the removal of a variety of organic pollutants in both water and wastewater treatment. However, many background constituents in water are highly reactive towards hydroxyl radicals (HO) and decrease the efficiency of the process towards contaminant oxidation. Up to 95% of the HO scavenging can come from dissolved organic matter (OM). In this study, 28 wastewater effluent samples were analyzed to find correlations between the reactivity of HO with wastewater-derived OM (known as effluent organic matter, EfOM), water quality parameters, treatment train characteristics, and fluorescence-derived data. Rate constants for the reaction between HO and EfOM (kEfOM-HO) were measured using a bench scale UV-based AOP system with methylene blue as an HO probe and confirmed using an electron pulse radiolysis method for a subset of the samples. The EfOM was characterized using a series of physicochemical parameters, including polarity, average molecular size and fluorescence. The kinetic data were analyzed with principal component analysis and Akaike Information Criterion. Four predictors were identified as dominant: chemical oxygen demand, retention onto NH2 extraction medium, fluorescence index, and total organic carbon. These four variables accounted for approximately 62% of the variability in the value of kEfOM-HO The average kEfOM-HO value for EfOM in this study was 2.5 × 10(8) MC(-1) s(-1), which is about 31% lower than the 3.6 × 10(8) MC(-1) s(-1) value determined for natural organic matter isolates and commonly used in AOP modeling.

Dimer formation during UV photolysis of diclofenac.

Dimer formation was observed during ultraviolet (UV) photolysis of the anti-inflammatory drug diclofenac, and confirmed with mass spectrometry, NMR and fluorescence analysis. The dimers were combinations of the two parent molecules or of the parent and the product of photolysis, and had visible color. Radical formation during UV exposure and dissolved oxygen photosensitized reactions played a role in dimer formation. Singlet oxygen formed via photosensitization by photolysis products of diclofenac. It reacted with diclofenac to form an epoxide which is an intermediate in some dimer formation pathways. Quantum yield of photolysis for diclofenac was 0.21±0.02 and 0.19±0.02 for UV irradiation from medium pressure and low pressure mercury vapor lamps, respectively. Band pass filter experiments revealed that the quantum yield is constant at wavelengths >200 nm. The same dimers formed in laboratory grade water when either of the two UV sources was used. Dimers did not form in wastewater effluent matrix, and diclofenac epoxide molecules may have formed bonds with organic matter rather than each other Implications for the importance of dimer formation in NOM are discussed.

The role of effluent nitrate in trace organic chemical oxidation during UV disinfection.

Most conventional biological treatment wastewater treatment plants (WWTPs) contain nitrate in the effluent. Nitrate undergoes photolysis when irradiated with ultraviolet (UV) light in the 200-240 and 300-325 nm wavelength range. In the process of nitrate photolysis, nitrite and hydroxyl radicals are produced. Medium pressure mercury lamps emitting a polychromatic UV spectrum including irradiation below 240 nm are becoming more common for wastewater disinfection. Therefore, nitrified effluent irradiated with polychromatic UV could effectively become a de facto advanced oxidation (hydroxyl radical) treatment process. UV-based advanced oxidation processes commonly rely on addition of hydrogen peroxide in the presence of UV irradiation for production of hydroxyl radicals. This study compares the steady-state concentration of hydroxyl radicals produced by nitrate contained in a conventional WWTP effluent to that produced by typical concentrations of hydrogen peroxide used for advanced oxidation treatment of water. The quantum yield of hydroxyl radical production from nitrate by all pathways was calculated to be 0.24 ± 0.03, and the quantum yield of hydroxyl radicals from nitrite was calculated to be 0.65 ± 0.06. A model was developed that would estimate production of hydroxyl radicals directly from nitrate and water quality parameters. In effluents with >5 mg-N/L of nitrate, the concentration of hydroxyl radicals is comparable to that produced by addition of 10 mg/L of H(2)O(2). Nitrifying wastewater treatment plants utilizing polychromatic UV systems at disinfection dose levels can be expected to achieve up to 30% degradation of some micropollutants by hydroxyl radical oxidation. Increasing UV fluence to levels used during advanced oxidation could achieve over 95% degradation of some compounds.