Characterization of the degradation products of lignocellulosic biomass by using tandem mass spectrometry experiments, model compounds, and quantum chemical calculations.

Biomass-derived degraded lignin and cellulose serve as possible alternatives to fossil fuels for energy and chemical resources. Fast pyrolysis of lignocellulosic biomass generates bio-oil that needs further refinement. However, as pyrolysis causes massive degradation to lignin and cellulose, this process produces very complex mixtures. The same applies to degradation methods other than fast pyrolysis. The ability to identify the degradation products of lignocellulosic biomass is of great importance to be able to optimize methodologies for the conversion of these mixtures to transportation fuels and valuable chemicals. Studies utilizing tandem mass spectrometry have provided invaluable, molecular-level information regarding the identities of compounds in degraded biomass. This review focuses on the molecular-level characterization of fast pyrolysis and other degradation products of lignin and cellulose via tandem mass spectrometry based on collision-activated dissociation (CAD). Many studies discussed here used model compounds to better understand both the ionization chemistry of the degradation products of lignin and cellulose and their ions' CAD reactions in mass spectrometers to develop methods for the structural characterization of the degradation products of lignocellulosic biomass. Further, model compound studies were also carried out to delineate the mechanisms of the fast pyrolysis reactions of lignocellulosic biomass. The above knowledge was used to assign likely structures to many degradation products of lignocellulosic biomass.

Application of Laser-Induced Acoustic Desorption for Molecular Rotational Resonance Spectroscopy.

Molecular Rotational Resonance (MRR) spectroscopy is a uniquely precise tool for the determination of molecular structures of volatile compounds in mixtures, as the characteristic rotational transition frequencies of a molecule are extremely sensitive to its 3D structure through the moments of inertia in a three-dimensional coordinate system. This enables identification of the compounds based on just a few parameters that can be calculated, as opposed to, for example, mass spectrometric data, which often require expert analysis of 10-20 different signals and the use of many standards/model compounds. This paper introduces a new sampling technique for MRR, laser-induced acoustic desorption (LIAD), to allow the vaporization of nonvolatile and thermally labile analytes without the need for excessive heating or derivatization. In this proof-of-concept study, LIAD was successfully coupled to an MRR instrument to conduct measurements on seven compounds with differing polarities, molecular weights, and melting and boiling points. Identification of three isomers in a mixture was also successfully performed using LIAD/MRR. Based on these results, LIAD/MRR is demonstrated to provide a powerful approach for the identification of nonvolatile and/or thermally labile analytes with molecular weights up to 600 Da in simple mixtures, which does not require the use of reference compounds. In the future, applications to more complex mixtures, such as those relevant to pharmaceutical research, and quantitative aspects of LIAD/MRR will be reported.

Determination of the compound class and functional groups in protonated analytes via diagnostic gas-phase ion-molecule reactions.

Diagnostic gas-phase ion-molecule reactions serve as a powerful alternative to collision-activated dissociation for the structural elucidation of analytes when using tandem mass spectrometry. The use of such ion-molecule reactions has been demonstrated to provide a robust tool for the identification of specific functional groups in unknown ionized analytes, differentiation of isomeric ions, and classification of unknown ions into different compound classes. During the past several years, considerable efforts have been dedicated to exploring various reagents and reagent inlet systems for functional-group selective ion-molecule reactions with protonated analytes. This review provides a comprehensive coverage of literature since 2006 on general and predictable functional-group selective ion-molecule reactions of protonated analytes, including simple monofunctional and complex polyfunctional analytes, whose mechanisms have been explored computationally. Detection limits for experiments involving high-performance liquid chromatography coupled with tandem mass spectrometry based on ion-molecule reactions and the application of machine learning to predict diagnostic ion-molecule reactions are also discussed.

Gas-Phase Reactivity of Quinoline-Based Singlet Oxenium Cations.

Isomeric quinolyloxenium cations were generated in the gas phase in an ion trap mass spectrometer to explore their reactions. The structures of some products were identified via collision-activated dissociation experiments involving model compounds to demonstrate that they have the expected heavy atom connectivity. The lack of radical reactions suggests that the cations have closed-shell singlet electronic ground states. Calculations (CASPT2/CASSCF(16,14)/cc-pVTZ//CASSCF(16,14)/cc-pVTZ) predict that their closed-shell singlet (1A') ground states are lower in energy by ca. 25 kcal mol-1 than their lowest-lying excited states. All cations are reactive toward dimethyl disulfide, dimethyl sulfide, and allyl iodide and most toward water and moderately reactive toward cyclohexane, reflecting their strongly electrophilic nature. They form adducts with nucleophiles in exothermic reactions (ca. 50 kcal mol-1 for dimethyl sulfide) that can fragment or be stabilized via IR emission. Most water adducts spontaneously isomerize to lower-energy tautomers. The nucleophiles preferentially add to those carbon atoms in the benzene ring that have the greatest positive charge (but not the carbonyl carbon). The cations react with cyclohexane via hydride abstraction by the oxygen atom. This is the only reaction that initially involves the oxygen atom and hence reflects the formally positively charged, monovalent oxygen atom in these cations.

Mechanistic Study into Free Radical-Activated Glycan Dissociations through Isotope-Labeled Cellobioses.

Inspired by the electron-activated dissociation technique, the most potent tool for glycan characterization, we recently developed free radical reagents for glycan structural elucidation. However, the underlying mechanisms of free radical-induced glycan dissociation remain unclear and, therefore, hinder the rational optimization of the free radical reagents and the interpretation of tandem mass spectra, especially the accurate assignment of the relatively low-abundant but information-rich ions. In this work, we selectively incorporate the 13C and/or 18O isotopes into cellobiose to study the mechanisms for free radical-induced dissociation of glycans. The eight isotope-labeled cellobioses include 1-13C, 3-13C, 1'-13C, 2'-13C, 3'-13C, 4'-13C, 5'-13C, and 1'-13C-4-18O-cellobioses. Upon one-step collisional activation, cross-ring (X ions), glycosidic bond (Y-, Z-, and B-related ions), and combinational (Y1 + 0,4X0 ion) cleavages are generated. These fragment ions can be unambiguously assigned and confirmed by the mass difference of isotope labeling. Importantly, the relatively low-abundant but information-rich ions, such as 1,5X0 + H, 1,4X0 + H, 2,4X0 + H-OH, Y1 + 0,4X0, 2,5X1-H, 3,5X0-H, 0,3X0-H, 1,4X0-H, and B2-3H, are confidently assigned. The mechanisms for the formations of these ions are investigated and supported by quantum chemical calculations. These ions are generally initiated by hydrogen abstraction followed by sequential ß-elimination and/or radical migration. Here, the mechanistic study for free radical-induced glycan dissociation allows us to interpret all of the free radical-induced fragment ions accurately and, therefore, enables the differentiation of stereochemical isomers. Moreover, it provides fundamental knowledge for the subsequent development of bioinformatics tools to interpret the complex free radical-induced glycan spectra.

Differentiation of the Aziridine Functionality from Related Functional Groups in Protonated Analytes by Using Selective Ion-Molecule Reactions Followed by Collision-Activated Dissociation in a Linear Quadrupole Ion Trap Mass Spectrometer.

Aziridines are commonly used as reagents for the synthesis of drug substances although they are potentially mutagenic and genotoxic. Therefore, their unambiguous detection is critically important. Unfortunately, tandem mass spectrometry (MS2) based on collision-activated dissociation (CAD), a powerful method used for the identification of many unknown compounds in complex mixtures, does not provide diagnostic fragmentation patterns for ionized aziridines. Therefore, a different mass spectrometry approach based on MS3 experiments is presented here for the identification of the aziridine functionalities. This approach is based on selective gas-phase ion-molecule reactions of protonated analytes with tris(dimethylamino)borane (TDMAB) followed by diagnostic CAD reactions in a modified linear quadrupole ion trap (LQIT) mass spectrometer. TDMAB reacts with protonated aziridines by forming adduct ions that have lost a dimethylamine (DMA) molecule ([M + H + TDMAB - HN(CH3)2]+). CAD on these product ions generated diagnostic fragment ions with m/z-values 25- and 43-units lower than those of the ion-molecule reaction product ions. None of the ion-molecule reaction product ions formed from other, structurally related, protonated analytes produced related fragment ions. Quantum chemical calculations were employed to explore the mechanisms of the observed reactions.

Direct functionalization of C-H bonds by electrophilic anions.

Alkanes and [B12X12]2- (X = Cl, Br) are both stable compounds which are difficult to functionalize. Here we demonstrate the formation of a boron-carbon bond between these substances in a two-step process. Fragmentation of [B12X12]2- in the gas phase generates highly reactive [B12X11]- ions which spontaneously react with alkanes. The reaction mechanism was investigated using tandem mass spectrometry and gas-phase vibrational spectroscopy combined with electronic structure calculations. [B12X11]- reacts by an electrophilic substitution of a proton in an alkane resulting in a B-C bond formation. The product is a dianionic [B12X11CnH2n+1]2- species, to which H+ is electrostatically bound. High-flux ion soft landing was performed to codeposit [B12X11]- and complex organic molecules (phthalates) in thin layers on surfaces. Molecular structure analysis of the product films revealed that C-H functionalization by [B12X11]- occurred in the presence of other more reactive functional groups. This observation demonstrates the utility of highly reactive fragment ions for selective bond formation processes and may pave the way for the use of gas-phase ion chemistry for the generation of complex molecular structures in the condensed phase.

Gas-Phase Reactivity of Phenylcarbyne Anions.

Gas-phase reactivities of the phenylcarbyne anion and its four derivatives were studied using a linear quadrupole ion trap mass spectrometer. The phenylcarbyne anions were calculated to have a triplet ground state (singlet-triplet splittings of 4-9 kcal mol-1), with the exception of the 4-cyanophenylcarbyne anion that has a singlet ground state (singlet-triplet splitting of -1.9 kcal mol-1). Only the phenylcarbyne anions with a triplet ground state react with acetone and dimethyl disulfide via radical mechanisms. On the other hand, only the phenylcarbyne anion with a singlet ground state abstracts H2O and H2C═C═O from acetic acid via electrophilic addition of the reagents to the anion. Finally, two hydroxy-substituted phenylcarbyne anions (with triplet ground states) partially tautomerize with the assistance of reagent molecules to the more stable distonic phenylcarbene anions. This occurs via abstraction of a proton from the reagent by the phenylcarbyne anion to generate a neutral (triplet) phenylcarbene and a reagent anion, which is followed by proton abstraction from the hydroxyl group of the neutral phenylcarbene by the reagent anion to generate the distonic phenylcarbene anion in an excited triplet state. Experiments performed on deuterated hydroxy-substituted phenylcarbyne anions verified the mechanism. The reactivities of the distonic phenylcarbene anions were found to be quite different from those of the phenylcarbyne anions. For example, they were found to abstract CH2 from acetonitrile, which is initiated by C-H insertion─typical singlet carbene reactivity.

Differentiation of Protonated Sulfonate Esters from Isomeric Sulfite Esters and Sulfones by Gas-Phase Ion-Molecule Reactions Followed by Diagnostic Collision-Activated Dissociation in Tandem Mass Spectrometry Experiments.

Sulfonate esters, a class of potentially mutagenic drug impurities, are strictly regulated in pharmaceuticals. On the other hand, sulfite esters and sulfones, analogs of sulfonate esters, have limited safety concerns. However, previously developed analytical methods for sulfonate ester identification cannot be used to differentiate sulfonate esters from the isomeric sulfite esters and sulfones. A tandem mass spectrometric method is introduced here for the differentiation of these compounds. Diisopropoxymethylborane (DIMB) reacts with protonated sulfonate esters, sulfite esters, and sulfones (and many other compounds) in the gas phase to form the product ion [M + H + DIMB - CH3CH(OH)CH3]+. Upon collision-activated dissociation (CAD), these product ions generate diagnostic fragment ions that enable the differentiation of sulfonate esters, sulfite esters, and sulfones from each other. For example, SO2 elimination enabled the unambiguous identification of sulfite esters. On the other hand, elimination of CH3B═O followed by elimination of (CH3)2C═O was only observed for sulfonate esters. Neither type of diagnostic fragment ions was detected for the products of sulfones. However, the product ions formed for sulfones with an additional hydroxyl substituent underwent the elimination of another CH3CH(OH)CH3 molecule, which enabled their identification. Finally, ion-molecule reactions of DIMB with various other functionalities were also examined. Some of them yielded the product ions [M + H + DIMB - CH3CH(OH)CH3]+ but none of these product ions underwent the diagnostic CAD reactions discussed above. Quantum chemical calculations were employed to explore the mechanisms of the reactions. The limits of detection for the diagnostic ion-molecule reaction product ions in high-performance liquid chromatography (HPLC)/mass spectrometry (MS2) experiments were found to range from 0.075 to 1.25 nmol.

A Diagnostic Nitrosamine Detection Approach for Pharmaceuticals by Using Tandem Mass Spectrometry Based on Diagnostic Gas-Phase Ion-Molecule Reactions.

N-Nitrosamines are strictly regulated in pharmaceutical products due to their carcinogenic nature. Therefore, the ability to rapidly and reliably identify the N-nitroso functionality is urgently needed. Unfortunately, not all ionized N-nitroso compounds produce diagnostic fragment ions and hence tandem mass spectrometry based on collision-activated dissociation (CAD) cannot be used to consistently identify the N-nitroso functionality. Therefore, a more reliable method was developed based on diagnostic functional-group selective ion-molecule reactions in a linear quadrupole ion trap mass spectrometer. 2-Methoxypropene (MOP) was identified as a reagent that reacts with protonated N-nitrosamines in a diagnostic manner by forming an adduct followed by the elimination of 2-propenol (CH3C(OH)═CH2]). From 18 protonated N-nitrosamine model compounds studied, 15 formed the diagnostic product ion. The lack of the diagnostic reaction for three of the N-nitrosamine model compounds was rationalized based on the presence of a pyridine ring that gets preferentially protonated instead of the N-nitroso functionality. These N-nitrosamines can be identified by subjecting a stable adduct formed upon ion-molecule reactions with MOP to CAD. Further, the ability to use ion-molecule reactions followed by CAD to differentiate protonated O-nitroso compounds with a pyridine ring from analogous N-nitrosamines was demonstrated This methodology is considered to be robust for the identification of the N-nitroso functionality in unknown analytes. Lastly, HPLC/MS2 experiments were performed to determine the detection limit for five FDA regulated N-nitrosamines.

Spin-Spin Coupling Controls the Gas-Phase Reactivity of Aromatic σ-Type Triradicals.

Examination of the reactions of σ-type quinolinium-based triradicals with cyclohexane in the gas phase demonstrated that the radical site that is the least strongly coupled to the other two radical sites reacts first, independent of the intrinsic reactivity of this radical site, in contrast to related biradicals that first react at the most electron-deficient radical site. Abstraction of one or two H atoms and formation of an ion that formally corresponds to a combination of the ion and cyclohexane accompanied by elimination of a H atom ("addition-H") were observed. In all cases except one, the most reactive radical site of the triradicals is intrinsically less reactive than the other two radical sites. The product complex of the first H atom abstraction either dissociates to give the H-atom-abstraction product and the cyclohexyl radical or the more reactive radical site in the produced biradical abstracts a H atom from the cyclohexyl radical. The monoradical product sometimes adds to cyclohexene followed by elimination of a H atom, generating the "addition-H" products. Similar reaction efficiencies were measured for three of the triradicals as for relevant monoradicals. Surprisingly, the remaining three triradicals (all containing a meta-pyridyne moiety) reacted substantially faster than the relevant monoradicals. This is likely due to the exothermic generation of a meta-pyridyne analog that has enough energy to attain the dehydrocarbon atom separation common for H-atom-abstraction transition states of protonated meta-pyridynes.

Detection of the tetrahedral reaction intermediate of the reaction of acetyl chloride with ethanol in microdroplets via laser desorption/ionization tandem mass spectrometry.

Understanding the fundamental mechanisms of chemical reactions is of great interest to scientists working in many fields as it enables the rationalization, prediction, and design of reactions. Many chemical processes involve the formation of short-lived reaction intermediates, most of which cannot be isolated and are challenging to detect. One such intermediate is the tetrahedral intermediate often proposed to be generated upon the reactions of acetyl chlorides with simple alcohols via an addition/elimination mechanism. However, the formation of this tetrahedral intermediate is a subject of controversy as it has not been detected. Furthermore, some kinetic evidence suggests the SN2 mechanism for this reaction. In the present investigation, a 266 nm pulsed Nd:YAG laser was used to evaporate and ionize reactants, reaction intermediates, and products in microdroplets of acetyl chloride and ethanol. A linear quadrupole ion trap mass spectrometer was used to detect the ions and collision-activated dissociation (CAD) experiments were employed for their structural characterization. The results demonstrate the formation of the protonated tetrahedral intermediate of the addition/elimination reaction. The protonated reaction intermediate was isolated and subjected to CAD, which resulted in the loss of water and ethylene, thus confirming its structure. These results demonstrate that the ethanolysis of acetyl chloride proceeds via an addition/elimination mechanism involving a tetrahedral reaction intermediate. However, the parallel occurrence of the SN2 mechanism cannot be ruled out.

Binding of saturated and unsaturated C6-hydrocarbons to the electrophilic anion [B12Br11]-: a systematic mechanistic study.

The highly reactive gaseous ion [B12Br11]- is a metal-free closed-shell anion which spontaneously forms covalent bonds with hydrocarbon molecules, including alkanes. Herein, we systematically investigate the reaction mechanism for binding of [B12Br11]- to the five hexane isomers yielding [B12Br11(C6H14)]-, as well as to cyclohexane and several hexene isomers (yielding [B12Br11(C6H12)]-) using collision-induced dissociation (CID), infrared photodissociation spectroscopy (IRPD) and computational methods. CID of the different [B12Br11(C6H14)]- ions results in distinct fragmentation patterns dependent on the structure of the hexane isomer. The observed fragmentation reactions provide insights into the addition mechanism of [B12Br11]- to hexane. Based on the observed CID patterns, we identified that either B-C bond formation through heterolytic C-C or C-H bond cleavages or B-H bond formation through heterolytic C-H cleavage occur dependent on the structure of the hexane isomer. Meanwhile, we observe identical CID spectra of adducts originating from isomers of C6H12. Spectroscopic investigations of adducts of 1-hexene and cyclohexane indicate the same product structure with an open C6 chain. Computational investigations evidenced that low lying transition states are present, which enable a ring opening reaction of cyclohexane when binding to [B12Br11]-.

Characterization of Protonated Substituted Ureas by Using Diagnostic Gas-Phase Ion-Molecule Reactions Followed by Collision-Activated Dissociation in Tandem Mass Spectrometry Experiments.

Substituted ureas correspond to a class of organic compounds commonly used in agricultural and chemical fields. However, distinguishing between different ureas and differentiating substituted ureas from other compounds with similar structures, such as amides, N-oxides, and carbamates, are challenging. In this paper, a four-stage tandem mass spectrometry method (MS4) is introduced for this purpose. This method is based on gas-phase ion-molecule reactions of isolated, protonated analytes ([M + H]+) with tris(dimethylamino)borane (TDMAB) (MS2) followed by subjecting a diagnostic product ion to two steps of collision-activated dissociation (CAD) (MS3 and MS4). All the analyte ions reacted with TDMAB to form a product ion [M + H + TDMAB - HN(CH3)2]+. The product ion formed for substituted ureas and amides eliminated another HN(CH3)2 molecule upon CAD to generate a fragment ion [M + H + TDMAB - 2HN(CH3)2]+, which was not observed for many other analytes, such as N-oxides, sulfoxides, and pyridines (studied previously). When the [M + H + TDMAB - 2HN(CH3)2]+ fragment ion was subjected to CAD, different fragment ions were generated for ureas, amides, and carbamates. Fragment ions diagnostic for the ureas were formed via elimination of R-N═C═O (R = hydrogen atom or a substituent), which enabled the differentiation of ureas from amides and carbamates. Furthermore, these fragment ions can be utilized to classify differently substituted ureas. Quantum chemical calculations were employed to explore the mechanisms of the reactions. The limit of detection for the diagnostic ion-molecule reaction product ion in HPLC/MS2 experiments was found to range from 20 to 100 nM.

Protonated Ground-State Singlet meta-Pyridynes React from an Excited Triplet State.

The gaseous 2,6-didehydropyridinium cation and its derivatives transfer a proton to reagents for which the reaction for their singlet ground states is too endothermic to be observed. These reactions occur from the lowest-energy excited triplet states, which has not been observed (or reported) for other meta-benzyne analogues. Quantum chemical calculations indicate that the (excited) triplet states are stronger Brønsted acids than their (ground) singlet states, likely due to unfavorable three-center, four-electron interactions in the singlet-state conjugate bases. The cations have substantially smaller (calculated) singlet-triplet (S-T) splittings (ranging from ca. -11 to -17 kcal mol-1) than other related meta-benzyne analogues (e.g., -23.4 kcal mol-1 for the 3,5-isomer). This is rationalized by the destabilization of the singlet states (relative to the triplet states) by reduced (spatial) overlap of the nonbonding molecular orbitals due to the presence of the nitrogen atom between the radical sites (making the ring more rigid). Both the singlet and triplet states are believed to be generated upon formation of these biradicals via energetic collisions due to their small S-T splittings. It appears that once the triplet states are formed, the rate of proton transfer is faster than the rate of intersystem crossing unless the biradicals contain heavy atoms.

Study on the Gas-Phase Reactivity of Charged Pyridynes.

The reactivities of three isomeric, charged ortho-pyridynes, the 1,2-, 2,3-, and 3,4-didehydropyridinium cations, were examined in the gas phase using Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometry. The structures of selected product ions were probed using collision-activated dissociation (CAD) experiments in a linear quadrupole ion trap (LQIT) mass spectrometer. Mechanisms based on quantum chemical calculations are proposed for the formation of all major products. The products of the reactions of the charged ortho-pyridynes in the gas phase were found to closely resemble those formed upon reactions of neutral ortho-arynes in solution, but the mechanisms of these reactions exhibit striking differences. Additionally, no radical reactions were observed for any of the charged ortho-pyridynes examined, in contrast to previous proposals that ortho-benzyne can occasionally react via radical mechanisms. Finally, the relative reactivities of those charged gaseous ortho-pyridynes that yielded similar product distributions were found to be affected mainly by the (calculated) vertical electron affinities of the dehydrocarbon sites, which suggests that the reactivity of these species is controlled by polar effects.

Characterization of ionized lignin model compounds with α-O-4 linkages by positive- and negative-ion mode electrospray ionization tandem mass spectrometry based on collision-activated dissociation.

RATIONALE: The biggest obstacle in the rational conversion of biomass into aromatic chemicals is the identification of unknown compounds in lignin degradation mixtures that are highly complex. As opposed to lignin degradation products with ß-O-4 linkages, very little is known about the mass spectrometric analysis of lignin degradation products with α-O-4 linkages. METHODS: Lignin model compounds with an α-O-4 and another linkage, as well as lignin model compounds with only ß-O-4 linkages, were ionized by attachment of lithium or sodium cations under positive-ion mode electrospray ionization (ESI) or by deprotonation in negative-ion mode ESI in a linear quadrupole ion trap mass spectrometer. The ions were subjected to collision-activated dissociation in multiple-stage tandem mass spectrometry experiments to characterize their fragmentation patterns. RESULTS: All studied compounds formed abundant sodium and lithium cation adducts in positive-ion mode ESI with no fragmentation. Model compounds with ß-O-4 linkages displayed stable [M - H]- ions in negative-ion mode ESI whereas compounds with α-O-4 linkages only showed fragment ions. CAD of the lithiated α-O-4 compounds provided more structural information than CAD of sodiated compounds. However, both sodiated and lithiated compounds with α-O-4 linkages showed losses of monomer units at the MS2 stage, which is useful for sequencing of lignins with this type of linkage. CONCLUSIONS: An ionization and sequencing method has been developed for lignin model compounds with α-O-4 linkages that spontaneously fragment upon ionization via (-)ESI.

Measurement of the Proton Affinities of a Series of Mono- and Biradicals of Pyridine.

The proton affinity (PA) of a neutral molecule is defined as the negative of the enthalpy change for the gas-phase reaction between a proton and the neutral molecule to produce the (charged) conjugate acid of the molecule. PA is a fundamental property that is related to the structure of a molecule and affects its reactivity. Very few PA values are available for basic organic monoradicals and none for biradicals. Here, the PA values for several σ-type carbon-centered pyridine-based monoradicals and biradicals have been experimentally determined by monitoring proton transfer from the protonated mono- and biradicals to reference bases with known proton affinities as a function of time in Fourier-transform ion cyclotron resonance (FT-ICR) and linear quadrupole ion trap (LQIT) mass spectrometers. A procedure was developed for both instruments that permits differentiation between exo- and endothermic proton transfer reactions. The PA values of all the (bi)radicals studied were found to be lower than that of pyridine. This is rationalized based on the electron-withdrawing nature of the radical site(s). Thus, the PA values decrease in the order: pyridine > monoradicals > biradicals. The PA values of the monoradicals were also found to increase (making the protonated radicals less acidic) as the distance between the basic nitrogen atom and the radical site increases. Similar behavior was found for the biradicals, with one exception: 3,5-didehydropyridine has a larger PA (215.3 ± 3.3 kcal mol-1) than 3,4-didehydropyridine (PA = 213.4 ± 3.3 kcal mol-1) even though the latter biradical has one radical site farther away from the basic nitrogen atom. Quantum chemical calculations of the PAs of the (bi)radicals are in reasonably good agreement with the experimentally determined values. At the DFT (B3LYP), CCSD(T), and CASPT2 levels of theory, the mean unsigned errors are 2.3, 1.7, and 2.1 kcal mol-1.

Fragmentation of Saturated Hydrocarbons upon Atmospheric Pressure Chemical Ionization Is Caused by Proton-Transfer Reactions.

Chemical characterization of complex mixtures of large saturated hydrocarbons is critically important for numerous fields, including petroleomics and renewable transportation fuels, but difficult to achieve. Atmospheric pressure chemical ionization (APCI) mass spectrometry has shown some promise in the analysis of saturated hydrocarbons. However, APCI causes extensive fragmentation to these compounds, which impedes its effectiveness. To prevent this fragmentation, its causes were examined via gas-phase ion-molecule reactions in vacuum in a linear quadrupole ion trap mass spectrometer. The results demonstrate that the mechanism proposed previously for ionization of saturated hydrocarbons upon APCI, hydride abstraction by carbocation reagent ions, is not correct. Instead, the fragmentation is caused by ionization of saturated hydrocarbons via exothermic proton-transfer reactions involving highly acidic, protonated atmospheric molecules, such as nitrogen and water. Accordingly, the extent of fragmentation was found to correlate with the proton affinities of the atmospheric molecules studied. Remarkably, controlled experiments involving isolated atmospheric ions and neat saturated hydrocarbons in vacuum yielded almost identical mass spectra as APCI involving atmospheric pressure conditions, the presence of many different chemicals, and an electrical discharge. In order to prevent or reduce the extent of fragmentation of saturated hydrocarbons upon APCI, and therefore enable accurate mass spectrometric characterization of complex mixtures of saturated hydrocarbons, the ion source should be purged of air to remove nitrogen and water and fill it with an inert gas with a substantially lower proton affinity.

Factors Affecting the Limit of Detection for HPLC/Tandem Mass Spectrometry Experiments Based on Gas-Phase Ion-Molecule Reactions.

Diagnostic and predictable gas-phase ion-molecule reactions have emerged as a potential alternative to collision-activated dissociation in tandem mass spectrometry (MS2) experiments performed to gain structural information for unknown organic compounds, such as drug metabolites, in complex mixtures. However, the applicability of this approach for analyzing metabolites at physiologically relevant concentrations has not been determined. In this study, HPLC/MS2 experiments based on gas-phase ion-molecule reactions of protonated model compounds were successfully conducted at nanomolar and picomolar analyte concentrations. As the analyte concentration decreased, the signal-to-noise ratio of the HPLC peaks decreased more than the signal-to-noise ratio of the mass spectrometer peaks. Therefore, the HPLC part of this analysis was the primary limiting factor for each analyte (rather than the ion-molecule reactions). The ion-molecule reaction limits of detection ranged from 50 pM to 250 nM with the average being 50-100 nM. Since all compounds had ion-molecule reaction detection limits below 500 nM, the detection limits are within the physiologically relevant range for in vivo studies of drugs and drug metabolites. When considering only mass spectrometry, the number of ion isolation events (one in MS2 experiments involving ion-molecule reactions or two in MS3 experiments involving CAD of products formed upon ion-molecule reactions) and the subsequent CAD in the MS3 experiments were the most important limiting factors. Indeed, the limit of detection for the MS3 experiments was 250 nM, about three times higher than the average ion-molecule reaction detection limit of 75 nM but still within physiologically relevant concentrations.