Harnessing bromide ions to boost peroxymonosulfate for reactive yellow 145 dye degradation.

Bromide (Br-) was found in the fresh waters at concentrations from 0.1 to 1 mg/L and can be used to activate peroxymonosulfate (PMS) as a widely used chemical oxidation agent. In the present study, the reaction between PMS and Br- ions (PMS/Br- process) for the effective degradation of reactive yellow 145 (RY-145) dye was investigated by changing operational parameters vis solution pH, dosage of Br- ions and PMS, RY-145 concentration, and reaction time. Based on the results, the simultaneous presence of PMS and Br- ions in the solution led to efficient degradation of RY-145 with a synergistic index of 11.89. The degradation efficiency of RY-145 was decreased in severe basic pH and the presence of CO32- ions as a coexisting anion. Likewise, 4 mg/L of humic acid (HA), used as a classic scavenger, led to a 26.53% decrease in the RY-145 degradation efficiency. The free bromine (HOBr/OBr-), superoxide radical (●O2-), and singlet oxygen (1O2) was the dominant oxidation agents in RY-145 degradation, which confirmed the nonradical degradation pathway. In addition, PMS/Br- process showed excellent ability in mineralizing RY-145 in different aqueous solutions (total organic carbon (TOC) decreased 86.39% in deionized water and 78.23% in tap water). Although pollutants such as azo dyes can be effectively removed in the PMS/Br- process, the formation of byproducts should be strategically controlled and special attention should be paid when the PMS-based advance oxidation process is applied to treat Br- containing solutions.

Degradation of 4-chlorophenol using MnOOH and γ-MnOOH nanomaterials as porous catalyst: Performance, synergistic mechanism, and effect of co-existing anions.

Transition metal catalysts have been proven to be a highly-potent catalyst for peroxymonosulfate (PMS) activation. The present work aimed to synthesizes the γ-MnOOH and MnOOH based on the one-pot hydrothermal method as PMS activators for efficient degradation of 4-chlorophenol (4-CP). The effect of operational parameters including solution pH, γ-MnOOH and MnOOH dose, PMS dose, 4-CP concentration, and also mixture media composition was elaborated. The results showed that the combination of MnOOH and γ-MnOOH with PMS noticeably creates a synergistic effect (SF) in 4-CP degradation by both PMS/MnOOH and PMS/γ-MnOOH process, with a SF value of 48.14 and 97.42, respectively. In both systems, the removal of 4-CP decreased in severely alkaline and acidic conditions, while no significant changes were observed in pH 5 to 9. Also, coexisting PO43- significantly reduced the removal efficiency of both systems. In addition, the effect of humic acid (HA) as a classical scavenger was investigated and showed that presence of 4 mg/L HA reduced the removal efficiency of 4-CP in the PMS/MnOOH process from 97.44% to 79.3%. The three consecutive use of both catalysts turned out that MnOOH has better stability than γ-MnOOH with lower Mn ions leaching. More importantly, quenching experiment showed that both non-radical (1O2 and O2-) and radical (SO4- and OH) pathways are involved in 4-CP degradation and non-radical pathway was the dominant one in both systems.

Recent advances in surface tailoring of thin film forward osmosis membranes: A review.

The recent advancements in fabricating forward osmosis (FO) membranes have shown promising results in desalination and water treatment. Different methods have been applied to improve FO performance, such as using mixed or new draw solutions, enhancing the recovery of draw solutions, membrane modification, and developing FO-hybrid systems. However, reliable methods to address the current issues, including reverse salt flux, fouling, and antibacterial activities, are still in progress. In recent decades, surface modification has been applied to different membrane processes, including FO membranes. Introducing nanochannels, bioparticles, new monomers, and hydrophilic-based materials to the surface layer of FO membranes has significantly impacted their performance and efficiency and resulted in better control over fouling and concentration polarization (CP) in these membranes. This review critically investigates the recent developments in FO membrane processes and fabrication techniques for FO surface-layer modification. In addition, this study focuses on the latest materials and structures used for the surface modification of FO membranes. Finally, the current challenges, gaps, and suggestions for future studies in this field have been discussed in detail.

Solving Water Scarcity Challenges in Arid Regions: A Novel Approach Employing Human-Based Meta-Heuristics and Machine Learning Algorithm for Groundwater Potential Mapping.

Addressing water scarcity challenges in arid regions is a pressing concern and demands innovative solutions for accurate groundwater potential mapping (GPM). This study presents a comprehensive evaluation of advanced modeling techniques to enhance the precision of GPM. This study, conducted in the Zayandeh Rood watershed, Iran, employed a spatial database comprising 16 influential factors on groundwater potential and data from 175 wells. This study introduced an innovative approach to GPM by enhancing the Random Forest (RF) algorithm. This enhancement involved integrating three metaheuristic algorithms inspired by human behavior: ICA (Imperialist Competitive Algorithm), TLBO (Teaching-Learning-Based Optimization), and SBO (Student Psychology Based Optimization). The modeling process used 70% training data and 30% evaluation data. Data preprocessing was performed using the multicollinearity test method and frequency ratio (FR) technique to refine the dataset. Subsequently, the GPM was generated using four distinct models, demonstrating the combined power of machine learning and human-inspired metaheuristic algorithms. The performance of the models was systematically assessed through extensive statistical analyses, including root mean squared error (RMSE), mean absolute error (MAE), area under the curve (AUC) for the receiver operating characteristic curve (ROC), Friedman tests, chi-squared tests, and Wilcoxon signed-rank tests. RF-ICA and RF-SPBO emerged as frontrunners, displaying statistically comparable accuracy and significantly outperforming RF-TLBO and the non-optimized RF model. The results of the GPM revealed the exceptional accuracy of RF-ICA, which exhibited a commanding AUC score of 0.865, underscoring its superiority in discriminating between different groundwater potential classes. RF-SPBO also displayed strong performance with an AUC of 0.842, highlighting its effectiveness in inaccurate classification. RF-TLBO and the non-optimized RF model achieved AUC values of 0.813 and 0.810, respectively, indicating comparable performance. The outcomes of this study provide valuable insights for policymakers, offering a robust framework for tackling water scarcity challenges in arid regions through precise and reliable groundwater potential assessments.

Dual modification of reverse osmosis membranes with NH2-MIL-125 and functionalised multiwalled carbon nanotubes for enhanced nanoplastic removal.

The present study describes a novel double-modified strategy for developing high-performance thin-film composite reverse osmosis (TFC-RO) membranes by incorporating titanium-based metal organic frameworks (NH2-MIL-125) and functionalised multiwalled carbon nanotubes (MWCNTs) into the support layer and selective layer, respectively. Initially, the support layer was subjected to successive modifications using NH2-MIL-125 mixed with polysulfone (PSF) in dimethylformamide DMF solution to investigate their impact on the performance and properties of the support layer and resultant TFC-RO membranes. Results indicated that the new structure of the modified support layer had significant influences on the developed TFC-RO membranes. Notably, the pristine PSF support exhibited a large surface pore size, medium porosity, and strong hydrophobicity, resulting in a low-flux TFC-RO membrane. However, after modification with NH2-MIL-125, the optimal blend support demonstrated a small surface pore size, high porosity, and improved hydrophilicity, favouring the formation of a high performance TFC-RO membrane. The incorporation of functionalised MWCNTs nanochannels into the selective layer, using the optimal NH2-MIL-125-PSF blended support, resulted in a smoother and more hydrophilic TFC-RO membrane with enhanced negative charge to improve antifouling properties against negative foulants (i.e., nanoplastics (NPs) and bovine serum albumin (BSA)). The double-modified membrane (TFC-RO-DM) exhibited superior performance over the conventional PSF-TFC-RO membrane. Notably, the maximum water flux reached 39 L m-2.h-1 with 98.4% NaCl rejection. The membrane exhibited a high flux recovery rate of 92% following a 30-min physical cleaning process. Additionally, the TFC-RO-DM membrane displayed reduced fouling against NPs suggesting the great promise of this innovative double-modification approach for the advancement of high-performance TFC-RO membranes.

Resilient forward osmosis membranes against microplastics fouling enhanced by MWCNTs/UiO-66-NH2 hybrid nanoparticles.

The escalating presence of microplastics (MPs) in wastewater necessitates the investigation of effective tertiary treatment process. Forward osmosis (FO) emerges as an effective non-pressurized membrane process, however, for the effective implementation of FO systems, the development of fouling-resistance FO membranes with high-performance is essential. This study focuses on the integration of MWCNT/UiO-66-NH2 as metal-organic frameworks (MOFs) and multi-wall carbon nanotubes (MWCNT) nanocomposites in thin film composite (TFC) FO membranes, harnessing the synergistic power of hybrid nanoparticles in FO membranes. The results showed that the addition of MWCNT/UiO-66-NH2 in the aqueous phase during polyamide formation changed the polyamide surface structure, and enhanced membranes' hydrophilicity by 44%. The water flux of the modified FO membrane incorporated with 0.1 wt% MWCNTs/UiO-66-NH2 increased by 67% and the reverse salt flux decreased by 22% as in comparison with the control membrane. Moreover, the modified membrane showed improved antifouling behavior against both organic foulant and MPs. The MWCNT/UiO-66-NH2 membrane experienced 35% flux decline while the control membrane experienced 65% flux decline. This proves that the integration of MWCNT/UiO-66-NH2 nanoparticles into TFC FO membranes is a viable approach in creating advanced FO membranes with high antifouling propensity with potential to be expanded further to other membrane applications.

Unique effect of bromide ion on intensification of advanced oxidation processes for pollutants removal: A systematic review.

Advanced oxidation processes (AOPs) have been developed to decompose toxic pollutants to protect the aquatic environment. AOP has been considered an alternative treatment method for wastewater treatment. Bromine is present in natural waters posing toxic effects on human health and hence, its removal from drinking water sources is necessary. Of the many techniques advanced oxidation is covered in this review. This review systematically examines literature published from 1997 to April 2024, sourced from Scopus, PubMed, Science Direct, and Web of Science databases, focusing on the efficacy of AOPs for pollutant removal from aqueous solutions containing bromide ions to investigate the impact of bromide ions on AOPs. Data and information extracted from each article eligible for inclusion in the review include the type of AOP, type of pollutants, and removal efficiency of AOP under the presence and absence of bromide ion. Of the 1784 documents screened, 90 studies met inclusion criteria, providing insights into various AOPs, including UV/chlorine, UV/PS, UV/H2O2, UV/catalyst, and visible light/catalyst processes. The observed impact of bromide ion presence on the efficacy of AOP processes, alongside the AOP method under scrutiny, is contingent upon various factors such as the nature of the target pollutant, catalyst type, and bromide ion concentration. These considerations are crucial in selecting the best method for removing specific pollutants under defined conditions. Challenges were encountered during result analysis included variations in experimental setups, disparities in pollutant types and concentrations, and inconsistencies in reporting AOP performance metrics. Addressing these parameters in research reports will enhance the coherence and utility of subsequent systematic reviews.

Wastewater treatment plants: The missing link in global One-Health surveillance and management of antibiotic resistance.

INTRODUCTION: As a global public health crisis, antibiotic resistance (AR) should be monitored and managed under the One-Health concept according to the World Health Organization (WHO), considering the interconnection between humans, animals, and the environment. But this approach often remains focused on human health and rarely on the environment and its compartments, especially wastewater as the main AR receptor. Wastewater treatment plants (WWTPs) not only are not designed for reliving AR but also provide appropriate conditions for enhancing AR through different mechanisms. METHODS: By reviewing the research-based statistics on the inclusion of WWTPs in the One-Health/AR program crisis, this paper highlights the importance of paying attention to these hotspots, at first. Also, the importance and technical roadmap for the application of WWTPs in both surveillance and management of AR were provided. The current position of these facilities was also evaluated using strengths, weaknesses, opportunities, and threats (SWOT) analysis. In the end, the concluding knowledge gaps and research needs for future investigations were presented. RESULTS: Despite the fact that wastewater matrices are the hotspot for AR dissemination, WWTPs appear under-represented in One-Health/AR literature. So, of the 414434 articles retrieved for One-Health only 1.5% (n = 6321) focused on AR and about 0.04% (n = 158) on WWTPs. The potential of WWTPs inclusion in AR surveillance has been confirmed by several studies, however, when it comes to its inclusion for management of AR, more evidence should be presented, which confirmed by SWOT results. DISCUSSION: As such, WWTPs simultaneously provide opportunities for AR surveillance as it is assumed that this medium can reflect the reality of the corresponding society, and for managing unexpected crises which could impact the public. Nonetheless, there are still numerous considerations to change WWTPs role from Achilles' heel to Ajax' shield, including strengthening the research-based knowledge and conducting both surveillance and management strategies of AR under One-Health concept (One-Health/AR) in a clear straightforward framework.

Synergistic effects of microplastics and organic foulants on the performance of forward osmosis membranes.

Microplastics (MPs) are emerging contaminants that are abundantly present in the influent and effluent of wastewater treatment plants (WWTPs). Forward osmosis (FO) is an advanced treatment technology with potential applications in WWTPs. The presence of MPs in WWTP effluents can contribute to FO fouling and performance deterioration. This study focuses on FO membrane fouling by MPs of different sizes, and the interactional impacts of MPs and Humic acid (HA) (as the most common organic foulant in WWTPs) on FO membrane performance. The synergistic effect of combined MPs and HA fouling is shown to cause higher flux decline for FO membranes than that of HA or MPs alone. Reverse salt flux increased in the presence of MPs, and decreased when HA was present. Further, full flux recovery was obtained for all fouled membranes after hydraulic cleaning. This indicates the efficiency of FO systems for treating wastewater with high fouling potential. This study highlights the necessity of considering MPs in studying fouling behaviour, and for mitigation strategies of membranes used in WWT. The fundamentals created here can be further extended to other membrane-assisted separation processes.

Performance evaluation of using evacuated tubes solar collector, perforated fins, and pebbles in a solar still - experimental study and CO2 mitigation analysis.

The combination of various methods of increasing evaporation rate can highly impact the performance of solar desalination. This investigation aims to find the impact of using evacuated tubes solar collector, perforated fins, and pebbles on the performance enhancement of a solar still. Simultaneously six-evacuated-tube solar collector to raise the evaporation rate of the system, the perforated fins to increase the heat transfer surface between water and absorber, and the immersed pebbles stone in the water to keep the high water temperature at low solar radiation were considered. The hourly and cumulative distillate output (DO) values are presented separately for the daytime and nighttime to provide extensive insight. The results indicate that on a sample day from the six months of experiments, which was in February 2019, the time for DO peak shifts from 1 to 3 p.m. Moreover, the temperature values for MSS experience almost 43 ℃ jumps on the peak and almost 19 ℃ increase on average compared to CSS. Furthermore, the cumulative DO in the daytime reaches from 2.515 to 6.662 L, while during the nighttime, an increase from 0.057 to 0.872 L is observed. Additionally, during the six months, the average DO jumps from 2.88 to 7.03 L, which means a significant enhancement of 144.1%. Moreover, the costs per liter of MSS and CSS are 0.0051 and 0.0056 dollars per liter, respectively. The net amount of CO2 reduction of MSS was improved by about 2.44 times higher than CSS.

Rational design of ZnO-zeolite imidazole hybrid nanoparticles with reduced charge recombination for enhanced photocatalysis.

Semiconducting zinc oxide nanoparticles (ZnO NPs) hold great potential as photocatalysts in wastewater treatment because of their favorable bandgap and cost-effectiveness. Unfortunately, ZnO NPs usually show rapid charge recombination that limits their photocatalytic efficacy significantly. Herein, we report a facile way of modifying ZnO NPs with zeolite imidazole framework-8 (ZIF8). A synergy between the two components may tackle the drawback of fast charge recombination for pristine ZnO NPs. Improved performance of photocatalytic degradation of methylene blue (MB) is confirmed by comparing with pristine ZnO and ZIF8 as the catalysts. The ZIF8 in the composite serves as a trap for photogenerated electrons, thus reducing the rate of charge recombination to enhance the photocatalysis rate. In addition, the hybridization process suppresses the aggregation of ZnO NPs, providing a large surface area and a greater number of active sites. Moreover, a small shift in the absorption band of ZnO@ZIF8 (10) NPs towards higher wavelength, also witnessed a little contribution towards enhanced photocatalytic properties. Mechanistic studies of the photocatalytic process of MB using ZnO@ZIF8 NPs catalyst reveal that hydroxyl radicals are the major reactive oxygen species. The facile hybridization of ZnO with ZIF8 provides a strategy for developing new photocatalysts with wide application potential.

Treatment of synthetic dye containing textile raw wastewater effluent using UV/Chlorine/Br photolysis process followed by activated carbon adsorption.

This study investigated the efficiency and feasibility of ultraviolet (UV)-assisted photolysis of synthetic dye containing textile raw wastewater effluent. For a said purpose, in-house developed UV/Chlorine/Br process was followed in the presence of activated carbon (AC) which additionally facilitate the dye adsorption. In UV/Chlorine process Cl•, Cl2•-, and HO• are generated in the solution and destroyed compounds that cannot be oxidized by the conventional oxidant. In this process, free bromine is formed and photolyzed by UV radiation and generate Br• and Br2•- that can enhance the rate of pollutant degradation. In the present study, the dye removal efficiency was contributed by dark bromide (7.18%), UV irradiation (26.8%), dark chlorination (78.67%), and UV/Chlorine/Br (87.01%), respectively. With increasing pH from 3.0 to 8.30, the dye removal efficiency was enhanced but decreased by further increasing pH values. In addition, magnetized activated carbon from pomegranate husk using dual-stage chemical activation was used for post-adsorption of the residual dye and its degradation byproducts. The adsorption of the dye residues by AC followed the second-order kinetics with the rate constant of 1.7 × 10-3. The phytotoxicity of the treated textile wastewater by UV irradiation, dark chlorination, and UV/Chlorine/Br was assessed by seed germination of Lepidium sativum seeds. The highest inhibition effect on seed germination was related to treated wastewater by UV irradiation (more than 90% inhibition) that alleviated to less than 10% when this effluent diluted to 5% v/v. The highest germination was observed when the seeds were irrigated by the effluent of the UV/Chlorine/Br process. The significant reduction in the toxicity of the treated wastewater revealed that the UV/Chlorine/Br process has a considerable potential to effectively detoxify textile wastewater. Graphical abstract.

Effect of ozonation-based disinfection methods on the removal of antibiotic resistant bacteria and resistance genes (ARB/ARGs) in water and wastewater treatment: a systematic review.

Antibiotic resistance is considered a universal health threat of the 21st century which its distribution and even development are mainly mediated by water-based media. Disinfection processes with the conventional methods are still the most promising options to combat such crises in aqueous matrices especially wastewater. Knowing that the extent of effectiveness and quality of disinfection is of great importance, this paper aimed to systematically review and discuss ozonation (as one of the main disinfectants with large scale application) effect on removing antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) from aqueous solutions, for which no study has been reported. For this, a comprehensive literature survey was performed within the international databases using appropriate keywords which yielded several studies involving different aspects and the effectiveness extent of ozonation on ARB & ARGs. The results showed that no definite conclusion could be drawn about the superiority of ozone alone or in a hybrid form. Mechanism of action was carefully evaluated and discussed although it is still poorly understood. Evaluation of the studies from denaturation and repairment perspectives showed that regrowth cannot be avoided after ozonation, especially for some ARB & ARGs variants. In addition, the comparison of the effectiveness on ARB & ARGs showed that ozonation is more effective for resistant bacteria than their respective genes. The degradation efficiency was found to be mainly influenced by operational parameters of CT (i.e. ozone dose & contact time), solids, alkalinity, pH, and type of pathogens and genes. Moreover, the correlation between ARB & ARGs removal and stressors (such as antibiotic residuals, heavy metals, aromatic matters, microcystins, opportunistic pathogens, etc.) has been reviewed to give the optimal references for further in-depth studies. The future perspectives have also been reported.

Comparison and verification of turbulence Reynolds-averaged Navier-Stokes closures to model spatially varied flows.

The robustness and accuracy of Reynolds-averaged Navier-Stokes (RANS) models was investigated for complex turbulent flow in an open channel receiving lateral inflow, also known as spatially varied flow with increasing discharge (SVF). The three RANS turbulence models tested include realizable k-ε, shear stress transport k-ω and Reynolds stress model based on their prominence to model jets in crossflows. Results were compared to experimental laser Doppler velocimetry measurements from a previous study. RANS results in the uniform flow region and farther from the jet centreline were more accurate than within the lateral inflow region. On the leeward side of the jet, RANS models failed to capture the downward velocity vectors resulting in major deviations in vertical velocity. Among RANS models minor variations were noted at impingement and near the water surface. Regardless of inadequately predicting complex characteristics of SVF, RANS models matched experimental water surface profiles and proved more superior to the theoretical approach currently used for design purposes.

Defluoridation of water using activated alumina in presence of natural organic matter via response surface methodology.

Adsorption by activated alumina is considered to be one of the most practiced methods for defluoridation of freshwater. This study was conducted, therefore, to investigate the effect of natural organic matters (NOMs) on the removal of fluoride by activated alumina using response surface methodology. To the authors' knowledge, this has not been previously investigated. Physico-chemical characterization of the alumina was determined by scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF), and X-ray diffractometer (XRD). Response surface methodology (RSM) was applied to evaluate the effect of single and combined parameters on the independent variables such as the initial concentration of fluoride, NOMs, and pH on the process. The results revealed that while presence of NOM and increase of pH enhance fluoride adsorption on the activated alumina, initial concentration of fluoride has an adverse effect on the efficiency. The experimental data were analyzed and found to be accurately and reliably fitted to a second-order polynomial model. Under optimum removal condition (fluoride concentration 20 mg/L, NOM concentration 20 mg/L, and pH 7) with a desirability value of 0.93 and fluoride removal efficiency of 80.6%, no significant difference was noticed with the previously reported sequence of the co-exiting ion affinity to activated alumina for fluoride removal. Moreover, aluminum residual was found to be below the recommended value by the guideline for drinking water. Also, the increase of fluoride adsorption on the activated alumina, as NOM concentrations increase, could be due to the complexation between fluoride and adsorbed NOM. Graphical abstract ᅟ.