RESUMEN
Linear polyethylenimine (L-PEI) has numerous applications, such as in pharmaceutical formulations, gene delivery, and water treatment. However, due to the presence of secondary amine groups, L-PEI shows a relatively high toxicity and low biocompatibility. Here, various organic anhydrides were used to modify L-PEI to reduce its toxicity and enhance its functionality. We selected methacrylic anhydride, crotonic anhydride, maleic anhydride, and succinic anhydride to modify L-PEI. The structure of the resulting derivatives was characterized using 1H NMR and FTIR spectroscopies, and their behavior in aqueous solutions was studied using turbidimetric and electrophoretic mobility measurements over a broad range of pHs. A fluorescence flow through method determined the mucoadhesive properties of the polymers to the bovine palpebral conjunctiva. Methacrylated L-PEI and crotonylated L-PEI showed strong mucoadhesive properties at pH 7.4, likely due to covalent bonding with mucin thiol groups. In contrast, maleylated and succinylated L-PEI were poorly mucoadhesive as the pH was above their isoelectric point, resulting in electrostatic repulsion between the polymers and mucin. The toxicity of these polymers was evaluated using in vivo assays with planaria and the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) cell viability assay in human alveolar epithelial cells. Moreover, the irritancy of polymers was assessed using a slug mucosa irritation assay. The results demonstrated that anhydride modification mitigated the adverse toxicity effects seen for parent L-PEI.
Asunto(s)
Anhídridos , Polietileneimina , Polietileneimina/química , Animales , Humanos , Anhídridos/química , Bovinos , Conjuntiva/efectos de los fármacos , Conjuntiva/metabolismoRESUMEN
Gelatin is a water-soluble natural polyampholyte with poor mucoadhesive properties. It has traditionally been used as a major ingredient in many pharmaceuticals, including soft and hard capsules, suppositories, tissue engineering, and regenerative medicine. The mucoadhesive properties of gelatin can be improved by modifying it through conjugation with specific adhesive unsaturated groups. In this study, gelatin was modified by reacting with crotonic, itaconic, and methacrylic anhydrides in varying molar ratios to yield crotonoylated-, itaconoylated-, and methacryloylated gelatins (abbreviated as Gel-CA, Gel-IA, and Gel-MA, respectively). The successful synthesis was confirmed using 1H NMR, FTIR spectroscopies, and colorimetric TNBSA assay. The effect of chemical modification on the isoelectric point was studied through viscosity and electrophoretic mobility measurements. The evolution of the storage (G') and loss (G'') moduli was employed to determine thermoreversible gelation points of modified and unmodified gelatins. The safety of modified gelatin derivatives was assessed with an in vivo slug mucosal irritation test (SMIT) and an in vitro MTT assay utilizing human pulmonary fibroblasts cell line. Two different model dosage forms, such as physical gels and spray-dried microparticles, were prepared and their mucoadhesive properties were evaluated using a flow-through technique with fluorescent detection and a tensile test with ex vivo porcine vaginal tissues and sheep nasal mucosa. Gelatins modified with unsaturated groups exhibited superior mucoadhesive properties compared to native gelatin. The enhanced ability of gelatin modified with these unsaturated functional groups is due to the formation of covalent bonds with cysteine-rich subdomains present in the mucin via thiol-ene click Michael-type addition reactions occurring under physiologically relevant conditions.
Asunto(s)
Anhídridos , Gelatina , Animales , Porcinos , Humanos , Ovinos , Gelatina/química , Fenómenos Químicos , Membrana Mucosa , Viscosidad , GelesRESUMEN
Silica is widely used in the oral care formulations to act as an abrasive and to give the products its distinct physical properties. In this study, silica particles were synthesized using a co-condensation of tetraethyl orthosilicate with a series of functional silane compounds [(3-mercaptopropyl)trimethoxysilane, (3-glycidyloxypropyl)trimethoxysilane, and (3-acryloxypropyl)trimethoxysilane)]. The surface of the particles based on tetraethyl orthosilicate and (3-glycidyloxypropyl)trimethoxysilane was then further modified with 3-aminophenylboronic acid. Commercial Aerosil R972 Pharma silica particles were also coated with chitosan. Additionally, commercially available (3-maleimido)propyl-functionalized silica particles were used in this study. All these functionalized silica particles were incorporated into toothpaste formulations, and their retentive properties were tested on ex vivo sheep tongue mucosa models using fluorescent microscopy-based flow-through techniques. Those surfaces with chitosan, phenylboronic acid, and acryloyl groups were shown to provide a significant improvement in the retention of the oral care formulations during the retention testing. The retention of toothpastes containing silica functionalized with maleimide and thiol groups was also superior compared to that of unmodified silica particles. This study synthesized and tested a range of silica particles and demonstrated that the functionalized silica incorporated into toothpastes can significantly improve the retention of these formulations on oral mucosal surfaces.
Asunto(s)
Quitosano , Pastas de Dientes , Animales , Ovinos , Adhesivos , Dióxido de Silicio , BocaRESUMEN
Oil-in-water emulsions, stabilised with conventional surfactants, are commonly used in eye drops for ocular drug delivery. However, the presence of surfactants can sometimes irritate tissues. Furthermore, conventional emulsions often have poor retention on ocular tissue. Pickering emulsions stabilised with nanoparticles have been gaining attention in recent years for a range of biomedical applications because of their biocompatibility. Here, Pickering emulsions were evaluated for the first time for the confinement of organic components for potential application in ocular drug delivery. For a model system, we used nanodiamond (ND) nanoparticles functionalised with covalently-bonded two-tail (2T) oligoglycine C10(NGly4)2 to make Pickering oil-in-water emulsions, which were stable over three months of storage under neutral pH. We proved the non-toxicity of ND-2T Pickering emulsions, comparable to buffer solution, via an ex vivo bovine corneal permeability and opacity test. The retention of the oil phase in the ND-2T stabilised emulsions on corneal tissue is significantly increased because of the mucoadhesive properties arising from the positively-charged terminal amino groups of 2T. Our formulated emulsions have a surface tension, pH and salt concentration comparable to that of tear fluid. The high retention of the ND-2T-stabilised emulsions on the corneal surface, in combination with their non-toxicity, gives them distinct advantages for ocular drug delivery. The principles of this model system could be applied in the future design of a range of formulations for drug delivery.
Asunto(s)
Nanodiamantes , Nanopartículas , Animales , Bovinos , Emulsiones/química , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Tensoactivos , Agua/química , Tamaño de la PartículaRESUMEN
Liposomes are promising spherical vesicles for topical drug delivery to the eye. Several types of vesicles were formulated in this study, including conventional, PEGylated, and maleimide-decorated PEGylated liposomes. The physicochemical characteristics of these liposomes, including their size, zeta potential, ciprofloxacin encapsulation efficiency, loading capacity, and release, were evaluated. The structure of these liposomes was examined using dynamic light scattering, transmission electron microscopy, and small angle neutron scattering. The ex vivo corneal and conjunctival retention of these liposomes were examined using the fluorescence flow-through method. Maleimide-decorated liposomes exhibited the best retention performance on bovine conjunctiva compared to other types of liposomes studied. Poor retention of all liposomal formulations was observed on bovine cornea.
Asunto(s)
Sistemas de Liberación de Medicamentos , Liposomas , Bovinos , Animales , Liposomas/química , Tamaño de la Partícula , Maleimidas/química , Polietilenglicoles/químicaRESUMEN
Nasal administration offers a possibility of delivering drugs to the brain. In the present work, nasal drug delivery systems were designed based on cationic Eudragit® EPO (EPO) and anionic Eudragit® L100-55 (L100-55) methacrylate copolymers. Two types of nanocarriers were prepared using interpolyelectrolyte complexation between these polymers. The first type of nanoparticles was prepared by forming interpolyelectrolyte complexes between unmodified EPO and L100-55. The second type of nanoparticles was formed through the complexation between PEGylated L100-55 and EPO. For this purpose, PEGylated L100-55 was synthesized by chemical conjugation of L100-55 with O-(2-aminoethyl)polyethylene glycol. The mucoadhesive properties of these nanoparticles were evaluated ex vivo using sheep nasal mucosa. Nanoparticles based on EPO and L100-55 exhibited mucoadhesive properties towards nasal mucosa, whereas PEGylated nanoparticles were non-mucoadhesive hence displayed mucus-penetrating properties. Both types of nanoparticles were used to formulate haloperidol and their ability to deliver the drug to the brain was evaluated in rats in vivo.
Asunto(s)
Encéfalo/efectos de los fármacos , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Polielectrolitos/farmacología , Resinas Acrílicas/química , Resinas Acrílicas/farmacología , Administración Intranasal , Animales , Humanos , Moco/efectos de los fármacos , Mucosa Nasal/efectos de los fármacos , Polielectrolitos/química , Polietilenglicoles/química , Polietilenglicoles/farmacología , Polímeros/química , Polímeros/farmacología , Ácidos Polimetacrílicos/química , Ácidos Polimetacrílicos/farmacología , Ovinos , Solubilidad/efectos de los fármacosRESUMEN
This study reports the development of a novel and simple formulation for probiotic delivery using chitosan-coated agar-gelatin gel particles. This methodology involves the production of agar-gelatin particles by thermally treating a mixture of agar and gelatin solutions at high temperatures (121 °C) and subsequently coating with chitosan. The particles were able to protect the probiotic strain Lactobacillus plantarum NCIMB 8826 during incubation for 2 h in simulated gastric fluid (pH 2), as no statistically significant loss (P > 0.05) in cell concentration was observed, and also resist dissolution in simulated intestinal fluid (pH 7.2). Interestingly, this protection is related to the fact that the intense thermal treatment affected the physicochemical properties of agars and resulted in the formation of a strong and tight polymer network, as indicated by the X-ray diffraction (XRD) analysis. Using an in vitro faecal batch fermentation model simulating the conditions of the distal part of the large intestine (pH 6.7-6.9), it was demonstrated by quantitative real-time PCR that the majority of L. plantarum cells were released from the agar-gelatin particles within 30 to 48 h. Overall, this work led to the development of a novel methodology for the production of probiotic-containing particles, which is simpler compared with current encapsulation technologies and has a lot of potential to be used for the controlled release of probiotics and potentially other solid bioactives in the large intestine.Key Points⢠Chitosan gel particles is a simple and scalable method of probiotic encapsulation.⢠Autoclaving agar-gelatin particles increases their stability at low pH.⢠Chitosan gel particles protected L. plantarum during gastrointestinal conditions.⢠Probiotics could be controlled release in the colon using chitosan gel particles.
Asunto(s)
Agar/química , Quitosano/química , Sistemas de Liberación de Medicamentos , Tracto Gastrointestinal , Gelatina/química , Probióticos/administración & dosificación , Agar/administración & dosificación , Quitosano/administración & dosificación , Preparaciones de Acción Retardada , Tracto Gastrointestinal/química , Tracto Gastrointestinal/microbiología , Gelatina/administración & dosificación , Calor , Concentración de Iones de Hidrógeno , Lactobacillus plantarum/fisiología , Viabilidad Microbiana , Probióticos/química , Probióticos/farmacocinética , SolubilidadRESUMEN
Nanoparticle characteristics, including their size, are governed by the reagents employed and the reaction parameters. Here, we systemically vary the catalyst, oxygen content, temperature, and solvent to modify the size and zeta-potential of thiolated organosilica nanoparticles. The particles were synthesized by self-condensation of 3-mercaptopropyltrimethoxysilane in a range of organic solvents in contact with oxygen, with NaOH and other catalysts. The particle size increased with increasing reaction temperature (70 ± 1 nm at 50 °C; 50 ± 1 nm at room temperature) but decreased when air was bubbled through the reaction mixture compared to no bubbling. A significant decrease in the particle size was seen when increasing the dielectric constant of the solvent and when increasing the catalyst concentration; from these, we provide empirical equations that can be used to design particle sizes by manipulating the dielectric constant of the solvent (or cosolvents) or by varying the NaOH catalyst concentration when dimethylsulfoxide is the selected solvent.
RESUMEN
Polypseudorotaxanes are polymer chains threaded by molecular rings that are free to unthread; these "pearl-necklace" can self-assemble further, leading to higher-order supramolecular structures with interesting functionalities. In this work, the complexation between α-cyclodextrin (α-CD), a cyclic oligosaccharide of glucopyranose units, and poly(ethylene glycol) (PEG) grafted to silica nanoparticles was studied. The threading of α-CD onto the polymeric chains leads to their aggregation into bundles, followed by either the precipitation of the inclusion complex or the formation of a gel phase, in which silica nanoparticles are incorporated. The kinetics of threading, followed by turbidimetry, revealed a dependence of the rate of complexation on the following parameters: the concentration of α-CD, temperature, PEG length (750, 4000, and 5000 g mol-1), whether the polymer is grafted or free in solution, and the density of grafting. Complexation is slower, and temperature has a higher impact on PEG grafted on silica nanoparticles compared to PEG free in solution. Thermodynamic parameters extracted from the transition-state theory showed that inclusion complex formation is favored with grafted PEG compared to free PEG and establishes a ratio of complexation of five to six ethylene oxide units per cyclodextrin. The complexation yields, determined by gravimetry, revealed that much higher yields are obtained with longer chains and higher grafting density. Thermogravimetric analysis and Fourier transform infrared spectroscopy on the inclusion complex corroborate the number of macrocycles threaded on the chains. A sol-gel transition was observed with the longer PEG chain (5k) at specific mixing ratios; oscillatory shear rheology measurements confirmed a highly solid-like behavior, with an elastic modulus G' of up to 25 kPa, higher than that in the absence of silica. These results thus provide the key parameters dictating inclusion complex formation between cyclodextrin and PEG covalently attached to colloidal silica and demonstrate a facile route toward soft nanoparticle gels based on host-guest interactions.
RESUMEN
Crown ethers are cyclic molecules consisting of a ring containing several ether groups. The most common and important members of this series are 12-crown-4 (12C4), 15-crown-5 (15C5), and 18-crown-6 (18C6). These container molecules have the ability to sequester metal ions, and their complexes with drugs are able to traverse cell membranes. This study investigated 12C4, 15C5, and 18C6 for their ability to increase solubility of ocular drugs and enhance their penetration into the cornea. Phase solubility analysis determined crown ethers' ability to enhance the solubility of riboflavin, a drug used for the therapy of keratoconus, and these solutions were investigated for ocular drug permeation enhancing properties. Atomic absorption spectroscopy demonstrated crown ether solutions' ability to sequester Ca2+ from corneal epithelia, and crown ether mediated adsorption of riboflavin into the stroma was investigated. Induced corneal opacity studies assessed potential toxicity of crown ethers. Crown ethers enhanced riboflavin's aqueous solubility and its penetration into in vitro bovine corneas; the smaller sized crown ethers gave greatest enhancement. They were shown to sequester Ca2+ ions from corneal epithelia; doing so loosens cellular membrane tight junctions thus enhancing riboflavin penetration. Induced corneal opacity was similar to that afforded by benzalkonium chloride and less than is produced using polyaminocarboxylic acids. However, in vivo experiments performed in rats with 12C4 did not show any statistically significant permeability enhancement compared to enhancer-free formulation.
Asunto(s)
Sustancia Propia/metabolismo , Éteres Corona/farmacología , Epitelio Corneal/metabolismo , Soluciones Oftálmicas/farmacología , Riboflavina/farmacología , Administración Oftálmica , Animales , Compuestos de Benzalconio/farmacología , Calcio/metabolismo , Bovinos , Opacidad de la Córnea/inducido químicamente , Sustancia Propia/efectos de los fármacos , Composición de Medicamentos/métodos , Epitelio Corneal/efectos de los fármacos , Queratocono/tratamiento farmacológico , Masculino , Soluciones Oftálmicas/uso terapéutico , Permeabilidad/efectos de los fármacos , Ratas , Ratas Wistar , Riboflavina/uso terapéutico , Solubilidad/efectos de los fármacos , Espectrofotometría Atómica/métodos , Uniones Estrechas/efectos de los fármacosRESUMEN
Whey proteins are becoming an increasingly popular functional food ingredient. There are, however, sensory properties associated with whey protein beverages that may hinder the consumption of quantities sufficient to gain the desired nutritional benefits. One such property is mouth drying. The influence of protein structure on the mouthfeel properties of milk proteins has been previously reported. This paper investigates the effect of thermal denaturation of whey proteins on physicochemical properties (viscosity, particle size, zeta-potential, pH), and relates this to the observed sensory properties measured by qualitative descriptive analysis and sequential profiling. Mouthcoating, drying and chalky attributes built up over repeated consumption, with higher intensities for samples subjected to longer heating times (p < 0.05). Viscosity, pH, and zeta-potential were found to be similar for all samples, however particle size increased with longer heating times. As the pH of all samples was close to neutral, this implies that neither the precipitation of whey proteins at low pH, nor their acidity, as reported in previous literature, can be the drying mechanisms in this case. The increase in mouth drying with increased heating time suggests that protein denaturation is a contributing factor and a possible mucoadhesive mechanism is discussed.
RESUMEN
In this study, we report detailed information on the internal structure of PNIPAM-b-PEG-b-PNIPAM nanoparticles formed from self-assembly in aqueous solutions upon increase in temperature. NMR spectroscopy, light scattering, and small-angle neutron scattering (SANS) were used to monitor different stages of nanoparticle formation as a function of temperature, providing insight into the fundamental processes involved. The presence of PEG in a copolymer structure significantly affects the formation of nanoparticles, making their transition to occur over a broader temperature range. The crucial parameter that controls the transition is the ratio of PEG/PNIPAM. For pure PNIPAM, the transition is sharp; the higher the PEG/PNIPAM ratio results in a broader transition. This behavior is explained by different mechanisms of PNIPAM block incorporation during nanoparticle formation at different PEG/PNIPAM ratios. Contrast variation experiments using SANS show that the structure of nanoparticles above cloud point temperatures for PNIPAM-b-PEG-b-PNIPAM copolymers is drastically different from the structure of PNIPAM mesoglobules. In contrast with pure PNIPAM mesoglobules, where solidlike particles and chain network with a mesh size of 1-3 nm are present, nanoparticles formed from PNIPAM-b-PEG-b-PNIPAM copolymers have nonuniform structure with "frozen" areas interconnected by single chains in Gaussian conformation. SANS data with deuterated "invisible" PEG blocks imply that PEG is uniformly distributed inside of a nanoparticle. It is kinetically flexible PEG blocks which affect the nanoparticle formation by prevention of PNIPAM microphase separation.
RESUMEN
Overcoming the natural defensive barrier functions of the eye remains one of the greatest challenges of ocular drug delivery. Cornea is a chemical and mechanical barrier preventing the passage of any foreign bodies including drugs into the eye, but the factors limiting penetration of permeants and nanoparticulate drug delivery systems through the cornea are still not fully understood. In this study, we investigate these barrier properties of the cornea using thiolated and PEGylated (750 and 5000 Da) nanoparticles, sodium fluorescein, and two linear polymers (dextran and polyethylene glycol). Experiments used intact bovine cornea in addition to bovine cornea de-epithelialized or tissues pretreated with cyclodextrin. It was shown that corneal epithelium is the major barrier for permeation; pretreatment of the cornea with ß-cyclodextrin provides higher permeation of low molecular weight compounds, such as sodium fluorescein, but does not enhance penetration of nanoparticles and larger molecules. Studying penetration of thiolated and PEGylated (750 and 5000 Da) nanoparticles into the de-epithelialized ocular tissue revealed that interactions between corneal surface and thiol groups of nanoparticles were more significant determinants of penetration than particle size (for the sizes used here). PEGylation with polyethylene glycol of a higher molecular weight (5000 Da) allows penetration of nanoparticles into the stroma, which proceeds gradually, after an initial 1 h lag phase.
Asunto(s)
Córnea/metabolismo , Fluoresceína/química , Microscopía Fluorescente/métodos , Nanopartículas/metabolismo , Polímeros/metabolismo , Animales , Bovinos , Sistemas de Liberación de Medicamentos , Técnicas In Vitro , Nanopartículas/química , Polímeros/química , beta-Ciclodextrinas/químicaRESUMEN
Understanding nanoparticle diffusion within non-Newtonian biological and synthetic fluids is essential in designing novel formulations (e.g., nanomedicines for drug delivery, shampoos, lotions, coatings, paints, etc.), but is presently poorly defined. This study reports the diffusion of thiolated and PEGylated silica nanoparticles, characterized by small-angle neutron scattering, in solutions of various water-soluble polymers such as poly(acrylic acid) (PAA), poly(N-vinylpyrrolidone) (PVP), poly(ethylene oxide) (PEO), and hydroxyethylcellulose (HEC) probed using NanoSight nanoparticle tracking analysis. Results show that the diffusivity of nanoparticles is affected by their dimensions, medium viscosity, and, in particular, the specific interactions between nanoparticles and the macromolecules in solution; strong attractive interactions such as hydrogen bonding hamper diffusion. The water-soluble polymers retarded the diffusion of thiolated particles in the order PEO > PVP > PAA > HEC whereas for PEGylated silica particles retardation followed the order PAA > PVP = HEC > PEO. In the absence of specific interactions with the medium, PEGylated nanoparticles exhibit enhanced mobility compared to their thiolated counterparts despite some increase in their dimensions.
Asunto(s)
Nanopartículas/química , Polímeros/química , Difusión , Tamaño de la Partícula , Soluciones , Propiedades de Superficie , Agua/químicaRESUMEN
Interpolymer complexes (IPCs) formed between complimentary polymers in solution have shown a wide range of applications from drug delivery to biosensors. This work describes the combined use of isothermal titration calorimetry and surface plasmon resonance to investigate the thermodynamic and kinetic processes during hydrogen-bonded interpolymer complexation. Varied polymers that are commonly used in layer-by-layer coatings and pharmaceutical preparations were selected to span a range of chemical functionalities including some known IPCs previously characterized by other techniques, and other polymer combinations with unknown outcomes. This work is the first to comprehensively detail the thermodynamic and kinetic data of hydrogen bonded IPCs, aiding understanding and detailed characterization of the complexes. The applicability of the two techniques in determining thermodynamic, gravimetric and kinetic properties of IPCs is considered.
RESUMEN
HYPOTHESIS: The mucoadhesive characteristics of amphoteric polymers (also known as polyampholytes) can vary and are influenced by factors such as the solution's pH and its relative position against their isoelectric point (pHIEP). Whilst the literature contains numerous reports on mucoadhesive properties of either cationic or anionic polymers, very little is known about these characteristics for polyampholytes EXPERIMENTS: Here, two amphoteric polymers were synthesized by reaction of linear polyethylene imine (l-PEI) with succinic or phthalic anhydride and their mucoadhesive properties were compared to bovine serum albumin (BSA), selected as a natural polyampholyte. Interactions between these polymers and porcine gastric mucin were studied using turbidimetric titration and isothermal titration calorimetry across a wide range of pHs. Model tablets were designed, coated with these polymers and tested to evaluate their adhesion to porcine gastric mucosa at different pHs. Moreover, a retention study using fluorescein isothiocyanate (FITC)-labelled polyampholytes deposited onto mucosal surfaces was also conducted FINDINGS: All these studies indicated the importance of solution pH and its relative position against pHIEP in the mucoadhesive properties of polyampholytes. Both synthetic and natural polyampholytes exhibited strong interactions with mucin and good mucoadhesive properties at pH < pHIEP.
Asunto(s)
Mucinas , Polímeros , Porcinos , Animales , Polímeros/química , Mucinas/química , Mucinas GástricasRESUMEN
This study comprises the comprehensive toxicological assessment of thiolated organosilica nanoparticles (NPs) synthesised from 3-mercaptopropyltrimethoxysilane (MPTS). We investigated the influence of three different types of nanoparticles synthesised from 3-mercaptopropyltrimethoxysilane: the starting thiolated silica (Si-NP-SH) and their derivatives prepared by surface PEGylation with PEG 750 (Si-NP-PEG750) and 5000 Da (Si-NP-PEG5000) on biological subjects from in vitro to in vivo experiments to explore the possible applications of those nanoparticles in biomedical research. As a result of this study, we generated a comprehensive understanding of the toxicological properties of these nanoparticles, including their cytotoxicity in different cell lines, hemolytic properties, in vitro localisation, mucosal irritation properties and biodistribution in BALB/c mice. Our findings indicate that all three types of nanoparticles can be considered safe and have promising prospects for use in biomedical applications. Nanoparticles did not affect the viability of HPF, MCF7, HEK293 and A549 cell lines at low concentrations (up to 100 µg/mL); moreover, they did not cause organ damage to BALB/c mice at concentrations of 10 mg/kg. The outcomes of this study enhance our understanding of the impact of organosilica nanoparticles on health and the environment, which is vital for developing silica nanoparticle-based drug delivery systems and provides opportunities to expand the applications of organosilica nanoparticles.
Asunto(s)
Nanopartículas , Compuestos de Organosilicio , Humanos , Ratones , Animales , Distribución Tisular , Células HEK293 , Nanopartículas/toxicidad , Dióxido de Silicio/toxicidad , Polietilenglicoles/toxicidadRESUMEN
Cyclodextrins are water-soluble cyclic oligosaccharides consisting of six, seven, and eight α-(1,4)-linked glucopyranose subunits. This study reports the use of different cyclodextrins in eye drop formulations to improve the aqueous solubility and corneal permeability of riboflavin. Riboflavin is a poorly soluble drug with a solubility up to 0.08 mg mL(-1) in deionized water. It is used as a drug topically administered to the eye to mediate UV-induced corneal cross-linking in the treatment of keratoconus. Aqueous solutions of ß-cyclodextrin (10-30 mg mL(-1)) can enhance the solubility of riboflavin up to 0.12-0.19 mg mL(-1), whereas the higher concentration of α-cyclodextrin (100 mg mL(-1)) achieved a lower level of enhancement of 0.11 mg mL(-1). The other oligosaccharides were found to be inefficient for this purpose. In vitro diffusion experiments performed with fresh and cryopreserved bovine cornea have demonstrated that ß-cyclodextrin enhances riboflavin permeability. The mechanism of this enhancement was examined through microscopic histological analysis of the cornea and is discussed in this paper.
Asunto(s)
Córnea/metabolismo , Ciclodextrinas/química , Riboflavina/química , Animales , Bovinos , Cromatografía Líquida de Alta Presión , Ciclodextrinas/farmacología , Interacciones Farmacológicas , Técnicas In Vitro , Permeabilidad/efectos de los fármacos , Solubilidad/efectos de los fármacosRESUMEN
If acid-sensitive drugs or cells are administered orally, there is often a reduction in efficacy associated with gastric passage. Formulation into a polymer matrix is a potential method to improve their stability. The visualization of pH within these materials may help better understand the action of these polymer systems and allow comparison of different formulations. We herein describe the development of a novel confocal laser-scanning microscopy (CLSM) method for visualizing pH changes within polymer matrices and demonstrate its applicability to an enteric formulation based on chitosan-coated alginate gels. The system in question is first shown to protect an acid-sensitive bacterial strain to low pH, before being studied by our technique. Prior to this study, it has been claimed that protection by these materials is a result of buffering, but this has not been demonstrated. The visualization of pH within these matrices during exposure to a pH 2.0 simulated gastric solution showed an encroachment of acid from the periphery of the capsule, and a persistence of pHs above 2.0 within the matrix. This implies that the protective effect of the alginate-chitosan matrices is most likely due to a combination of buffering of acid as it enters the polymer matrix and the slowing of acid penetration.
Asunto(s)
Alginatos/química , Bifidobacterium/efectos de los fármacos , Cápsulas/química , Quitosano/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , Tracto Gastrointestinal/química , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Concentración de Iones de Hidrógeno , Microscopía Confocal/métodos , Polímeros/químicaRESUMEN
Preparation of stable hydrogels using physically (electrostatically) interacting charge-complementary polyelectrolyte chains seems to be more attractive from a practical point of view than the use of organic crosslinking agents. In this work natural polyelectrolytes-chitosan and pectin-were used, due to their biocompatibility and biodegradability. The biodegradability of hydrogels is confirmed by experiments with hyaluronidase as an enzyme. It has been shown that the use of pectins with different molecular weights makes it possible to prepare hydrogels with different rheological characteristics and swelling kinetics. These polyelectrolyte hydrogels loaded with cytostatic cisplatin as a model drug provide an opportunity for its prolonged release, which is important for therapy. The drug release is regulated to a certain extent by the choice of hydrogel composition. The developed systems can potentially improve the effects of cancer treatment due to the prolonged release of cytostatic cisplatin.