Charge transfer in steam purified arc discharge single walled carbon nanotubes filled with lutetium halides.

In the present work, the effect of doping on electronic properties in bulk purified and filled arc-discharge single-walled carbon nanotubes samples is studied for the first time by in situ Raman spectroelectrochemical method. A major challenge to turn the potential of SWCNTs into customer applications is to reduce or eliminate their contaminants by means of purification techniques. Besides, the endohedral functionalization of SWCNTs with organic and inorganic materials (i.e. metal halides) allows the development of tailored functional hybrids. Here, we report the purification and endohedral functionalization of SWCNTs with doping affecting the SWCNTs. Steam-purified SWCNTs have been filled with selected lutetium(iii) halides, LuCl3, LuBr3, LuI3, and sealed using high-temperature treatment, yielding closed-ended SWCNTs with the filling material confined in the inner cavity. The purified SWCNTs were studied using TGA, EDX, STEM and Raman spectroscopy. The lutetium(iii) halide-filled SWCNTs (LuX3@SWCNTs) were characterized using STEM, EDX, Raman spectroscopy and in situ Raman spectroelectrochemistry. It was found that there is a charge transfer between the SWCNTs and the encapsulated LuX3 (X = Cl, Br, I). The obtained data testify to the acceptor doping effect of lutetium(iii) halides incorporated into the SWCNT channels, which is accompanied by the charge transfer from nanotube walls to the introduced substances.

The Role of Temperature on the Degree of End-Closing and Filling of Single-Walled Carbon Nanotubes.

Carbon nanotubes (CNTs), owing to their high surface area-to-volume ratio and hollow core, can be employed as hosts for adsorbed and/or encapsulated molecules. At high temperatures, the ends of CNTs close spontaneously, which is relevant for several applications, including catalysis, gas storage, and biomedical imaging and therapy. This study highlights the influence of the annealing temperature in the range between 400 and 1100 °C on the structure and morphology of single-walled CNTs. The nitrogen adsorption and density functional theory calculations indicate that the fraction of end-closed CNTs increases with temperature. Raman spectroscopy reveals that the thermal treatment does not alter the tubular structure. Insight is also provided into the efficacy of CNTs filling from the molten phase, depending on the annealing temperature. The CNTs are filled with europium (III) chloride and analyzed by using electron microscopy (scanning electron microscopy and high-resolution transmission electron microscopy) and energy-dispersive X-ray spectroscopy, confirming the presence of filling and closed ends. The filling yield increases with temperature, as determined by thermogravimetric analysis. The obtained results show that the apparent surface area of CNTs, fraction of closed ends, and amount of encapsulated payload can be tailored via annealing.

Determination of the length of single-walled carbon nanotubes by scanning electron microscopy.

A methodology is presented to determine the length of well individualized single-walled carbon nanotubes (SWCNTs) by means of scanning electron microscopy (SEM). Accurate measurements on wide areas of the sample can be achieved in an easy, fast and trustworthy manner. We have tested several supports and solvents to optimize the dispersion of SWCNTs, as well as the SEM imaging conditions. The optimal methodology goes via dispersion of the sample in ortho-dichlorobenzene, deposition onto a continuous carbon film supported on a copper TEM grid, and SEM imaging at 2 kV in secondary electrons mode using a through-in-lens detector. •Individualization of SWCNTs is achieved by dispersion of SWCNTs in ortho-dichlorobenzene and deposition onto TEM grids•Individual SWCNTs are imaged by SEM•Length determination by SEM is as precise as AFM.

Epoxidation of Carbon Nanocapsules: Decoration of Single-Walled Carbon Nanotubes Filled with Metal Halides.

Methyl(trifluoromethyl)dioxirane (TFDO) can be used for the oxyfunctionalization of SWCNTs filled with NaI and LuCl3 under mild conditions. The chosen metal halides are of interest for theranostics, both for imaging and therapy when in their radioactive form. The applied functionalization methodology does not require metal catalyst, preserves the integrity of the nanotubes during treatment, avoiding the release of the filling material. In this way, epoxidation can be considered as an efficient methodology for the functionalization of carbon nanocapsules, where the traditional harsh oxidation conditions by acids are not applicable.

Design of antibody-functionalized carbon nanotubes filled with radioactivable metals towards a targeted anticancer therapy.

In the present work we have devised the synthesis of a novel promising carbon nanotube carrier for the targeted delivery of radioactivity, through a combination of endohedral and exohedral functionalization. Steam-purified single-walled carbon nanotubes (SWCNTs) have been initially filled with radioactive analogues (i.e. metal halides) and sealed by high temperature treatment, affording closed-ended CNTs with the filling material confined in the inner cavity. The external functionalization of these filled CNTs was then achieved by nitrene cycloaddition and followed by the derivatization with a monoclonal antibody (Cetuximab) targeting the epidermal growth factor receptor (EGFR), overexpressed by several cancer cells. The targeting efficiency of the so-obtained conjugate was evaluated by immunostaining with a secondary antibody and by incubation of the CNTs with EGFR positive cells (U87-EGFR+), followed by flow cytometry, confocal microscopy or elemental analyses. We demonstrated that our filled and functionalized CNTs can internalize more efficiently in EGFR positive cancer cells.

Carbon nanotubes allow capture of krypton, barium and lead for multichannel biological X-ray fluorescence imaging.

The desire to study biology in situ has been aided by many imaging techniques. Among these, X-ray fluorescence (XRF) mapping permits observation of elemental distributions in a multichannel manner. However, XRF imaging is underused, in part, because of the difficulty in interpreting maps without an underlying cellular 'blueprint'; this could be supplied using contrast agents. Carbon nanotubes (CNTs) can be filled with a wide range of inorganic materials, and thus can be used as 'contrast agents' if biologically absent elements are encapsulated. Here we show that sealed single-walled CNTs filled with lead, barium and even krypton can be produced, and externally decorated with peptides to provide affinity for sub-cellular targets. The agents are able to highlight specific organelles in multiplexed XRF mapping, and are, in principle, a general and versatile tool for this, and other modes of biological imaging.