Musculoskeletal Pain, Physical Activity, Muscle Mass, and Mortality in Older Adults: Results from the Korean Longitudinal Study on Health and Aging (KLoSHA).

Background and objectives: Musculoskeletal (MSK) pain significantly impacts physical activity and quality of life in older adults, potentially influencing mortality. This study explored the relationship between MSK pain, physical activity, muscle mass, and mortality among older adults. Material and Methods: We studied 1000 participants in the Korean Longitudinal Study on Health and Aging (KLoSHA), a prospective, population-based cohort study of people aged 65 years or older. Survival status was tracked over a 5-year period. Correlations between low back pain (LBP), knee pain, regular exercise, appendicular skeletal muscle mass (ASM), and other variables were analyzed. Logistic regression analyses were used to identify independent risk factors for mortality. Results: Of the total participants, 829 (82.9%) survived over a 5-year period. Survivors tended to be younger, had a higher BMI, and were more active in regular exercise. In contrast, non-survivors exhibited a higher prevalence of both LBP and knee pain, along with increased instances of multiple MSK pains. Lower ASM correlated moderately with LBP and knee pain, whereas higher ASM was associated with regular exercise. There was a moderate correlation between LBP and knee pain, both of which were associated with a lack of regular exercise. Age, sex, ASM, and regular exercise were significant predictors, even though MSK pain itself did not directly predict all-cause mortality. Conclusions: This study demonstrated the independent association between ASM, regular exercise, and mortality. Although MSK pain did not directly correlate with all-cause mortality, the non-survivor group had higher levels of both single and multiple MSK pains. Recognizing the interplay of MSK pain, physical activity, and muscle mass for older adults, the research underscores the need for holistic strategies to enhance health outcomes in older individuals with MSK pain.

Surface-Engineered Nanomaterials in Water: Understanding Critical Dynamics of Soft Organic Coatings and Relative Aggregation Density.

Inorganic-organic nanocomposites, typically as an inorganic core with surface organic coating(s), have received interest as potential platform materials for sensor, catalyst, sorbent, and environmental applications, among others. Here, we describe the critical role of organic surface coatings with regard to the colloidal stability of engineered manganese oxide nanoparticles (MnxOy NPs). Specifically, we prepared libraries of monodisperse MnxOy NPs with a serial selection of surface coatings (stearic acid (SA), oleic acid (OA), poly(maleic anhydride-alt-1-octadecene) (PMAO), linear polyethyleneimine (LPEI), and multibranched polyethyleneimine (BPEI)), which were chosen based on comparable structure(s) and functional group(s). We systematically evaluated the role of surface organic coatings via critical coagulation concentrations (CCCs), which were compared with theoretical calculations (Schulze-Hardy rule). Through a newly developed light scattering protocol, we observed that the effective density of nanoclusters can exceed NPs' primary (bulk) density depending on the open space(s) within organic coatings. Interestingly, PMAO-coated NPs were more stable at the point of zero charge (PZC) than at neutral pH (pH 7), despite the loss of effective surface charge potential. CCC was 334 mM in NaCl and 1.5 mM in CaCl2 at pH 7, compared to CCC values of 807 mM in NaCl and 210 mM in CaCl2 at PZC. This increase in stability is due to polymer (re)configuration (at PZC), which was further confirmed with a quartz crystal microbalance-based technique to evaluate surface-based polymer dynamics. Taken together, this work quantifies the role of organic coating dynamics, including structure, grafting density, and configuration on the colloidal stability of organic-coated NPs.

Delineating the Relationship between Nanoparticle Attachment Efficiency and Fluid Flow Velocity.

The ability to fundamentally describe nanoparticle (NP) transport in the subsurface underpins environmental risk assessment and successful material applications, including advanced remediation and sensing technologies. Despite considerable progress, our understanding of NP deposition behavior remains incomplete as there are conflicting reports regarding the effect of fluid flow velocity on attachment efficiency. To directly address this and more accurately describe NP attachment behavior, we have developed a novel protocol using a quartz crystal microbalance with dissipation monitoring (QCM-D) to separate and individually observe deposition mechanisms (diffusion and sedimentation), providing in situ, real-time information about particle diffusion (from the bulk liquid to solid surface). Through this technique, we have verified that the approaching velocity of NPs via diffusion increases (0.8-6.7 µm/s) with increasing flow velocity (6.1-106.0 µm/s), leading to an increased NP kinetic energy, thus affecting deposition processes. Further, in the presence of a secondary energy minimum associated with organic surface coatings, secondary minimum deposition decreases and primary minimum deposition increases with the flow velocity. NPs deposited at the primary minimum are relatively more resistant to hydrodynamic energies (including detachment associated energies), resulting in an increase of observed attachment efficiencies. Taken together, this work not only describes a novel method to delineate and quantify physical processes underpinning particle behavior but also provides direct measurements regarding key factors defining the relationship(s) of flow velocity and particle attachment. Such insight is valuable for next-generation fate and transport model accuracy, especially under unfavorable attachment regimes, which is a current and critical need for subsurface material applications and implication paradigms.

Osteomyelitis of the Temporomandibular Joint Following Canal Wall Down Mastoidectomy.

Osteomyelitis of the temporomandibular joint (TMJ) is a rare disease that is characterized by osteitis of the mandibular condyle or glenoid fossa. Although this condition is usually associated with trauma, dental disease, or extension of a local infection, it may also occur as a complication of otologic infection. However, osteomyelitis of the TMJ as a complication of otologic surgery has not yet been reported. I present the case of a 54-year-old woman who developed a polyp on the superior portion of the tympanic membrane 9 weeks after canal wall down mastoidectomy. This is an extremely rare case of a patient with osteomyelitis of the TMJ as a complication of otologic surgery.

Aqueous aggregation and surface deposition processes of engineered superparamagnetic iron oxide nanoparticles for environmental applications.

Engineered, superparamagnetic, iron oxide nanoparticles (IONPs) have significant potential as platform materials for environmental sensing, imaging and remediation due to their unique size, physicochemical and magnetic properties. To this end, controlling the size and surface chemistry of the materials is crucial for such applications in the aqueous phase, and in particular, for porous matrixes with particle-surface interaction considerations. In this study, superparamagnetic, highly monodispersed 8 nm IONPs were synthesized and transferred into water as stable suspensions (remaining monodispersed) by way of an interfacial oleic acid bilayer surface. Once stabilized and characterized, particle-particle and model surface interactions (deposition and release) were quantitatively investigated and described systematically as a function of ionic strength (IS) and type with time-resolved dynamic light scattering (DLS), zeta potential, and real-time quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. The critical coagulation concentration (CCC) for oleic acid bilayer coated iron oxide nanoparticles (OA-IONPs) were determined to be 710 mM for NaCl (matching DLVO predictions) and 10.6 mM for CaCl2, respectively. For all conditions tested, surface deposition kinetics showed stronger, more favorable interactions between OA-IONPs and polystyrene surfaces compared to silica, which is hypothesized to be due to increased particle-surface hydrophobic interactions (when compared to silica surfaces).

Nanoplastics from disposable paper cups and microwavable food containers.

Nanoplastics (NPs, <1 µm) pose greater risks due to their increased absorption rates in biological systems. In this study, we investigated the release of NPs from paper cups and microwavable food containers coated with low-density polyethylene (LDPE) and polylactic acid (PLA). For disposable paper cups, we found that LDPE-coated cups released up to 26-fold more NPs (maximum 1.9 × 107 per cup) than PLA-coated ones. The NPs release from LDPE-coated cups was increased at high temperatures above 80 °C, and further increased by physical agitation. However, negligible NP release was observed when the inner coating thickness exceeded 1 mm. For microwavable food containers, those with PLA coatings were more susceptible to the effects of microwave. Depending on the cooking time, we noticed a significant difference (up to 40000 times) in the number of released NPs between LDPE and PLA coatings. Additionally, higher microwave power level led to an increase of NPs, even with constant total energy input. Considering the release of NP, PLA coatings for disposable paper cups and LDPE coatings for microwavable food containers seem more suitable. Furthermore, our results suggest that multi-use cups significantly reduce NPs release due to their material thickness, making them a safer alternative to disposable ones.

γ-Mangosteen, an autophagy enhancer, prevents skin-aging via activating KEAP1/NRF2 signaling and downregulating MAPKs/AP-1/NF-κB-mediated MMPs.

BACKGROUND: Mangosteens, a naturally occurring xanthones, found abundantly in mangosteen fruits. The anti-skin aging potential of γ-mangosteen (GM) remains unexplored; therefore, we investigated the UVB-induced anti-skin aging of GM via activation of autophagy. HYPOTHESIS: We hypothesized that GM exerts antioxidant and anti-aging capabilities both in vitro and in vivo through activation of autophagy as well as control of KEAP1/NRF2 signaling and MAPKs/AP-1/NF-κB-mediated MMPs pathways. METHODS: The anti-skin aging effects of GM were studied using HDF cells and a mice model. Various assays, such as DPPH, ABTS, CUPRAC, FRAP, and ROS generation, assessed antioxidant activities. Kits measured antioxidant enzymes, SA-ß-gal staining, collagen, MDA content, si-RNA experiments, and promoter assays. Western blotting evaluated protein levels of c-Jun, c-Fos, p-IκBα/ß, p-NF-κB, MAPK, MMPs, collagenase, elastin, KEAP1, NRF2, HO-1, and autophagy-related proteins. RESULTS: GM exhibited strong antioxidant, collagenase and elastase enzyme inhibition activity surpassing α- and ß-mangosteen. GM competitively inhibited elastase with a Ki value of 29.04 µM. GM orchestrated the KEAP1-NRF2 pathway, enhancing HO-1 expression, and suppressed UVB-induced ROS in HDF cells. NRF2 knockdown compromised GM's antioxidant efficacy, leading to uncontrolled ROS post-UVB. GM bolstered endogenous antioxidants, curbing lipid peroxidation in UVB-exposed HDF cells and BALB/c mice. GM effectively halted UVB-induced cell senescence, and reduced MMP-1/-9, while elevated TIMP-1 levels, augmented COL1A1, ELN, and HAS-2 expression in vitro and in vivo. Additionally, it suppressed UVB-induced MAPKs, AP-1, NF-κB phosphorylation. Pharmacological inhibitors synergistically enhanced GM's anti-skin aging potential. Moreover, GM inhibited UVB-induced mTOR activation, upregulated LC3-II, Atg5, Beclin 1, and reduced p62 in both UVB induced HDF cells and BALB/c mice, while blocking of autophagy successfully halt the GM effects against the UVB-induced increase of cell senescence, degradation of collagen through upregulation of MMP-1, underscoring GM's substantial anti-skin aging impact via autophagy induction in vitro and in vivo. CONCLUSION: Together, GM has potent antioxidant and anti-skin aging ingredients that can be used to formulate skin care products for both the nutraceutical and cosmeceutical industries.

Borderline Malignant Sebaceoma of the Auricle: A Case Report.

Sebaceoma is a rare benign tumor arising from the sebaceous gland of the skin. Sebaceoma often occurs on the head and neck but rarely on the ears. We present the case of a 78-year-old female patient with a two-year history of a protruding mass in her left ear. Physical examination revealed a well-circumscribed plaque in the crus of the helix of the left ear. A wide local excisional biopsy was taken, and the mass was subjected to histopathologic assessment. While the mass showed cytological findings indicating sebaceoma, it also presented malignant features architecturally and immunohistochemically. Based on these findings, the tumor was regarded as a sebaceoma of borderline malignancy. Supplementary Information: The online version contains supplementary material available at 10.1007/s12070-023-03552-4.

Coxiella burnetii infection in a patient with tick bite.

INTRODUCTION: We report the case of a 60-year-old male who was hospitalized with fever, headache, fatigue, nausea, and myalgia for six days. METHODOLOGY: Polymerase chain reactions (PCR) were performed on patient blood samples, and four ticks were collected from the area the patient mowed. Indirect immunofluorescence assays (IFAs) were performed on serum samples to detect specific antibodies. RESULTS: The collected ticks were identified as Haemaphysalis longicornis. Coxiella species-specific nested PCR (N-PCR) and sequencing confirmed the presence of Coxiella burnetii in the patient, and Coxiella-like bacteria were identified in three of the four ticks. IFA results showed ≥ 4-fold increases in both IgM and IgG antibody titers against Q fever. CONCLUSIONS: Despite positive PCR results for Coxiella species in both the patient and the ticks, different bacterial species were isolated, suggesting that the patient was not infected with C. burnetii through tick bites. Further investigation is required to identify the carriers or transmitters of the infection.

Comparison between Conventional Breath-hold and Respiratory-triggered Magnetic Resonance Cholangiopancreatography with and without Compressed Sensing: Cross-sectional Study.

AIM: The application of compressed sensing (CS) has enabled breath-hold 3D-MRCP with a shorter acquisition time in clinical practice. INTRODUCTION: To compare the image quality of breath-hold (BH) and respiratory-triggered (RT) 3D-MRCP with or without CS application in the same study population. METHODS: In this retrospective study, from February to July 2020, a total of 98 consecutive patients underwent four different acquisition types of 3D-MRCP.; 1) BH MRCP with the generalized autocalibrating partially parallel acquisition (GRAPPA) (BH-GRAPPA), 2) RT-GRAPPA-MRCP, 3) RT-CS-MRCP and 4) BH-CS-MRCP. Relative contrast of common bile duct, 5-scale visibility score of biliary pancreatic ducts, 3-scale artifact score and 5-scale overall image quality score were evaluated by two abdominal radiologists. RESULTS: Relative contrast value was significantly higher in BH-CS or RT-CS than in RT-GRAPPA (0.90 ± 0.057 and 0.89 ± 0.079, respectively, vs. 0.82 ± 0.071, p < 0.01) or BH-GRAPPA (vs. 0.77 ± 0.080, p < 0.01). The area affected by artifact was significantly lower in BH-CS among 4 MRCPs (p < 0.08). Overall image quality score in BH-CS was significantly higher than BH-GRAPPA (3.40 vs. 2.71, p < 0.01). There were no significant differences between RT-GRAPPA and BH-CS (vs. 3.13, p = 0.67) in overall image quality. CONCLUSION: In this study, our results revealed BH-CS had higher relative contrast and comparable or superior image quality among four MRCP sequences.

Novel compact dual-band LOROP camera with telecentricity.

We report a new dual band compact oblique photography camera (LC11) that is the first to benefit from the incorporation of telecentricity. LC11 has a common front end F/6.6 telescope with 280 mm in aperture that forms its electro-optical (EO, F/7.5) and MWIR (F/5.6) modules. The design allows a substantial reduction in volume and weight due to i) the EO/MWIR compensator and relay lens groups arranged very close to the primary mirror (M1), and ii) light-weighted M1 and SiC main frame (MF) structure. Telecentricity of up to 2 and 0.2 degrees for the EO and MWIR modules, respectively, is achieved by balancing optical power among all lenses. The initial field test shows 0.32 ± 0.05 (EO)/0.20 ± 0.06 (MWIR) in measured MTF at 28 (EO) and 13 (MWIR) cycles/mm in target frequency, and an improved operability with a greater reduction in operational volume and mass than other existing LOROP cameras.

Interaction of silica nanoparticles with a flat silica surface through neutron reflectometry.

Neutron reflectometry (NR) was employed to study the interaction of nanosized silica particles with a flat silica surface in aqueous solutions. Unlike other experimental tools that are used to study surface interactions, NR can provide information on the particle density profile in the solution near the interface. Two types of silica particles (25 and 100 nm) were suspended in aqueous solutions of varying ionic strength. Theoretical calculations of the surface interaction potential between a particle and a flat silica surface using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory were compared to the experimental data. The theory predicts that the potential energy is highly dependent on the ionic strength. In high ionic strength solutions, NR reveals a high concentration of particles near the flat silica surface. Under the same conditions, theoretical calculations show an attractive force between a particle and a flat surface. For low ionic strength solutions, the particle concentration near the surface obtained from NR is the same as the bulk concentration, while depletion of particles near the surface is expected because of the repulsion predicted by the DLVO theory.

Photoactive Polyethylenimine-Coated Graphene Oxide Composites for Enhanced Cr(VI) Reduction and Recovery.

The application of positively charged polymers is a common treatment strategy for the sorption and separation of dissolved hexavalent chromium Cr(VI). In particular, polyethylenimine (PEI) has been demonstrated as an effective polymer for Cr treatment due to abundant amine groups and cost-effectiveness. However, PEI as a photoactive polymer has not been previously explored for Cr treatment. Toward this, we demonstrate the significant photoactive potential of PEI for Cr sorption and reduction [to Cr (III)], delineating amine structure-function relationships. Overall, Cr(VI) photoreduction is enhanced dramatically as a function of amine group density. Additionally, among the types of amine groups evaluated, tertiary amines are observed to be the most reactive followed by secondary and primary amines. When PEI is incorporated onto graphene oxide (GO) as a stabilizing scaffold, mass loading of PEI is a key variable for Cr(VI) treatment performance, which is observed to be a function of PEI molecular weight and oxidation extent of GO. Finally, when combined with magnetic nanomaterials, low energy, high efficiency separation, and reuse are demonstrated. For these, sorption-based separation processes maintained excellent performance over five cycles. Taken together, this work demonstrates that PEI can serve as highly effective, multifunctional material coating(s) not only for chromium treatment but potentially for other oxidized aqueous species as well.

Enhanced exchange-coupling effect in Nd-Fe-B/Fe-B nanocomposite magnet.

Soft phase magnetic Fe-B nanoparticles were prepared by coprecipitation and the hard phase magnetic Nd-Fe-B nanoparticles were obtained from mechanical ball mill of the bulk Nd-Fe-B with a shaker mill. Also mechanical ball mill technique was applied to the mixture of Nd-Fe-B and Fe-B nanoparticles to build up an exchange-coupled nanocomposite magnet. It was loaded in electronic furnace and annealed under a flow of hydrogen at 953 K for 30 min. The exchange coupled interaction of isotropic magnets was characterized by smooth hysteresis loop with a high value of remanence (Mr/Ms > 0.5).

Organic Functionalized Graphene Oxide Behavior in Water.

Surface modified graphene oxide (GO) has received broad interest as a potential platform material for sensors, membranes, and sorbents, among other environmental applications. However, compared to parent (unmodified) GO, there is a dearth of information regarding the behavior of subsequently (secondary) modified GO, other than bulk natural organic matter (NOM) coating(s). Here, we systematically explore the critical role of organic functionalization with respect to GO stability in water. Specifically, we synthesized a matrix of GO-based materials considering a carefully chosen range of bound organic molecules (hydrophobic coatings: propylamine, tert-octylamine, and 1-adamantylamine; hydrophilic coatings: 3-amino-1-propanol and 3-amino-1-adamantanol), so that chemical structures and functional groups could be directly compared. GO (without organic functionalization) with varying oxidation extent(s) was also included for comparison. The material matrix was evaluated for aqueous stability by comparing critical coagulation concentration (CCC) as a function of varied ionic strength and type (NaCl, CaCl2, MgCl2, and MgSO4) at pH 7.0. Without surface derivatization (i.e., pristine GO), increased stability was observed with an increase in the GO oxidation state, which is supported by plate-plate Derjaguin, Landau, Verwey and Overbeek (DLVO) energy interaction analyses. For derivatized GO, we observed that hydrophilic additions (phi-GO) are relatively more stable than hydrophobic organic coated GO (pho-GO). We further explored this by altering a single OH group in the adamantane-x structure (3-amino-1-adamantanol vs. 1-adamantylamine). As expected, Ca2+ and monovalent co-ions play an important role in the aggregation of highly oxidized GO (HGO) and phi-GO, while the effects of divalent cations and co-ions were less significant for pho-GO. Taken together, this work provides new insight into the intricate dynamics of GO-based material stability in water as it relates to surface functionalization (surface energies) and ionic conditions including type of co- and counter-ion, valence, and concentration.

Engineering Graphene Oxide Laminate Membranes for Enhanced Flux and Boron Treatment with Polyethylenimine (PEI) Polymers.

In this work, we have developed and characterized flux-enhanced graphene oxide laminate (GOL) membranes by increasing interlayer (layer-to-layer) spacing using multibranched polyethylenimine (PEI) polymers with varied molecular weights and by controlling the graphene oxide (GO) oxidation extent. For these assemblies, water flux was demonstrated to increase by as much as ca. 30-fold compared to GO only laminate controls. PEI-embedded GOL membranes also had better methyl orange (MO) rejection performance than GO laminate controls due to the dilution effects (i.e., water is transported through the assembly much faster than MO). Further, boron removal is demonstrated via functionalized PEI with d-glucono-1,5-lactone, containing a high density of boron chelating groups, which can also be recycled/recovered with high efficiency.

Preliminary study on the efficacy of xerostomia treatment with sialocentesis targeting thyroid disease patients given radioiodine therapy.

BACKGROUND: Radioiodine therapy has been widely used for thyroid disease patients, but hyposalivation and xerostomia may occur in 10~30% of patients. Sialocentesis is a procedure that removes inflammatory substances in the salivary duct and expands the duct for the secretion and delivery of saliva. In this study, thyroid disease patients treated with radioactive iodine were selected among the patients with xerostomia who visited the hospital, and the effect of sialocentesis was compared and analyzed. And then, comparison between the radioiodine therapy-experienced group and the non-radioiodine therapy-experienced group was conducted. RESULTS: In this study, we studied xerostomia patients who underwent radioiodine therapy due to thyroid diseases and who underwent sialocentesis at the Korea University Anam Hospital. Sialocentesis is conducted by one surgeon. The study also compares the clinical symptoms before and after the surgery. After the procedure, the discomfort due to xerostomia was reduced, and the symptom was improved effectively. CONCLUSIONS: The results of this study showed that sialocentesis has a clinical effect in the treatment of xerostomia, which is a side effect of radioiodine therapy. In addition, the possibility of further clinical application of sialocentesis in the future is found.

Sialolithotomy of the submandibular duct using sialendoscopy.

BACKGROUND: Conventionally, indirect radiography has been used to diagnose salivary gland diseases. However, with the development of sialendoscopy, diagnosis and treatment of salivary gland diseases have become more effective. Herein, we report a case of sialolithotomy treated with sialendoscopy and compare it with the existing methods through a literature review. CASE PRESENTATION: Two patients with a foreign body sensation under the tongue and dry mouth visited the Anam Hospital, Korea University. Radiographic examination revealed salivary stones inside the right Wharton duct, and the patients underwent sialolithotomy under local or general anaesthesia. The stones were totally removed, and there were no postoperative complications such as bleeding or pain. CONCLUSION: The development of sialendoscopy has enabled better definitive diagnosis of salivary gland diseases compared with the conventional methods; better treatment outcomes can be obtained when sialendoscopy is used in appropriate cases.

Effect of arthrocentesis on the clinical outcome of various treatment methods for temporomandibular joint disorders.

BACKGROUND: We evaluated the improvement of pain and the increase in mouth opening after temporomandibular joint arthrocentesis and the possible association with various factors such as previous splint treatment, medication, and diagnosis. RESULTS: We studied 57 temporomandibular joint disorder patients who underwent arthrocentesis at Korea University Anam Hospital. These patients (24 males and 33 females, aged between 15 and 76 years) underwent arthrocentesis that was performed by one surgeon. The degree of mouth opening (assessed using the maximum mouth opening: MMO) and pain (assessed using the visual analog scale: VAS) were assessed pre- and post-arthrocentesis. The study also investigated whether treatment modalities other than arthrocentesis (medication and appliance therapy) were performed. Statistical analysis revealed that there was a significant difference in mouth opening and pain after temporomandibular joint arthrocentesis. Preoperative appliance therapy affected the results of arthrocentesis, but it was not statistically significant. With regard to pain relief, preoperative diagnosis did not show a significant difference. However, with regard to maximum mouth opening, patients with disc displacement without reduction with limited mouth opening (closed lock) showed the highest recovery (11.13 mm). CONCLUSION: The average of MMO increase after arthrocentesis was 9.10 mm, and patients with disc displacement without reduction with locking (closed lock) showed most recovery in maximum mouth opening and it was statistically significant. The average pain relief of patients after arthrocentesis was 3.03 in the VAS scale, and patients using anterior repositioning splint (ARS) preoperatively showed the most pain relief.

Study of the magnetic phase of Fe-Pt alloy nanoparticles.

High temperature solution phase decomposition of Fe(CO)5 and reduction of Pt(acac)2 in the presence of stabilizers of oleic acid and oleyl amine are employed to produce Fe(1-x)Pt(x) alloy nanoparticles. The Fe and Pt composition of the nanosized materials can be tuned by adjusting the molar ratio of Fe(CO)5 to Pt(acac)2, and the compositions ranging from Fe40Pt60 to Fe80Pt20 are obtained. This study is to investigate the influence of the composition on Curie temperature (Tc) of Fe(1-x)Pt(x) nanoparticles monitored by thermomagnetic analysis (TMA).