In vitro treatment of Candida albicans biofilms on denture base material with volume dielectric barrier discharge plasma (VDBD) compared with common chemical antiseptics.

OBJECTIVES: To prevent oral candidiasis, it is crucial to inactivate Candida-based biofilms on dentures. Common denture cleansing solutions cannot sufficiently inactivate Candida albicans. Therefore, we investigated the anticandidal efficacy of a physical plasma against C. albicans biofilms in vitro. MATERIALS AND METHODS: Argon or argon plasma with 1 % oxygen admixture was applied on C. albicans biofilms grown for 2, 7, or 16 days on polymethylmethacrylate discs; 0.1 % chlorhexidine digluconate (CHX) and 0.6 % sodium hypochlorite (NaOCl) solutions served as positive treatment controls. In addition, these two solutions were applied in combination with plasma for 30 min to assess potential synergistic effects. The anticandidal efficacy was determined by the number of colony forming units (CFU) in log(10) and expressed as reduction factor (RF, the difference between control and treated specimen). RESULTS: On 2-day-biofilms, plasma treatment alone or combined with 30 min CHX treatment led to significant differences of means of CFU (RF = 4.2 and RF = 4.3), clearly superior to CHX treatment alone (RF = 0.6). Plasma treatment of 7-day-or 16-day-old biofilms revealed no significant CFU reduction. The treatment of 7-day-old (RF = 1.7) and 16-day-old (RF = 1.3) biofilms was slightly more effective with NaOCl alone than with the combined treatment of NaOCl and plasma (RF = 1.6/RF = 1.9). The combination of CHX and plasma increased the RF immaterially. CONCLUSION: The use of plasma alone and in combination with antiseptics is promising anticandidal regimens for daily use on dentures when biofilms are not older than 2 days. CLINICAL RELEVANCE: Plasma could help to reduce denture-associated candidiasis.

Atmospheric plasma enhances wettability and cell spreading on dental implant metals.

OBJECTIVES: Treatment regimens, which predictably support re-osseointegration of implants with peri-implantitis, are needed. Increased wettability may be an important factor for re-osseointegration. In this study, a cold atmospheric pressure gas-discharge plasma was applied to reduce water contact angles on titanium discs with different surface topography and to improve the spreading of osteoblastic cells. MATERIAL AND METHODS: An argon plasma jet with different oxygen admixtures was used to treat titanium discs with different topologies, i.e. machined, SLA(®) , SLActive(®) , diamond bur-treated or Airflow(®) -treated. Water contact angles were measured before and after plasma treatment. The spreading behaviour of human osteoblastic cells was investigated. RESULTS: Contact angle of titanium discs (baseline values: 68°-117°) were significantly reduced close to 0° irrespective of surface topography after the application of argon plasma with 1.0% oxygen admixture for 60 s or 120 s. The cell size of osteoblastic cells grown on argon-oxygen-plasma-treated titanium discs was significantly larger than on non-treated surfaces (p < 0.001) irrespective of surface topography. CONCLUSIONS: Plasma treatment reduced contact angle and supported spreading of osteoblastic cells. The application of cold plasma may be supportive in the treatment of peri-implant lesions and may improve the process of re-osseointegration.

Antimicrobial efficacy of non-thermal plasma in comparison to chlorhexidine against dental biofilms on titanium discs in vitro - proof of principle experiment.

AIM: Dental biofilms play a major role in the pathogenesis of peri-implant mucositis. Biofilm reduction is a pre-requisite for a successful therapy of peri-implant mucosal lesions. In this study, we evaluated the effect of three different plasma devices on the reduction of Streptococcus mutans (S. mutans) and multispecies human saliva biofilms. MATERIAL AND METHODS: We assessed the efficacy of three different non-thermal atmospheric pressure plasma devices against biofilms of S. mutans and saliva multispecies grown on titanium discs in vitro in comparison with a chlorhexidine digluconate (CHX) rinse. Efficacy of plasma treatment was determined by the number of colony forming units (CFU) and by scanning electron microscopy. The results were reported as reduction of CFU (CFU(untreated) -CFU(treated) ). RESULTS: The application of plasma was much more effective than CHX against biofilms. The maximum reduction of CHX was 3.36 for S. mutans biofilm and 1.50 for saliva biofilm, whereas the colony forming units (CFU) reduction of the volume dielectric barrier discharge argon plasma was 5.38 for S. mutans biofilm and 5.67 for saliva biofilm. CONCLUSIONS: Treatment of single- and multispecies dental biofilms on titanium discs with non-thermal atmospheric pressure plasma was more efficient than CHX application in vitro. Thus, the development of plasma devices for the treatment of peri-implant mucositis may be fruitful.

Cold atmospheric plasma in combination with mechanical treatment improves osteoblast growth on biofilm covered titanium discs.

Treatment of implants with peri-implantitis is often unsuccessful, because an instrumented implant surface and residual microbial biofilm impedes re-osseointegration. The application of cold atmospheric plasma (CAP) could be a simple and effective strategy to overcome the inherent problems of peri-implantitis treatment. CAP is able to destroy and eliminate bacterial biofilms. Additionally, it increases the wettability of titanium, which supports cellular attachment. In this study, the behaviour of osteoblasts on titanium discs was analysed after treatment of bacterial biofilms with CAP, brushing, or a combination of both. A human plaque biofilm was cultured on titanium discs. Treatment with a brush (BR), 1% oxygen/argon CAP (PL), or brushing combined with CAP (BR+PL) was used to eliminate the biofilm. Discs without biofilm (C), autoclaved biofilm (AUTO) and untreated biofilm (BIO) served as controls. Subsequently, human osteoblastic cell growth (MG-63) was observed after 1 and 24 h. Biofilm remnants on BR and PL impaired osteoblastic cell development, whereas the BR+PL provided an increased area of osteoblastic cells. A five-day cell growth was only detectable on BR+PL treated discs. The combination of established brushing and CAP application may be a promising strategy to treat peri-implantitis.

Antimicrobial efficacy of two surface barrier discharges with air plasma against in vitro biofilms.

The treatment of infected wounds is one possible therapeutic aspect of plasma medicine. Chronic wounds are often associated with microbial biofilms which limit the efficacy of antiseptics. The present study investigates two different surface barrier discharges with air plasma to compare their efficacy against microbial biofilms with chlorhexidine digluconate solution (CHX) as representative of an important antibiofilm antiseptic. Pseudomonas aeruginosa SG81 and Staphylococcus epidermidis RP62A were cultivated on polycarbonate discs. The biofilms were treated for 30, 60, 150, 300 or 600 s with plasma or for 600 s with 0.1% CHX, respectively. After treatment, biofilms were dispensed by ultrasound and the antimicrobial effects were determined as difference in the number of the colony forming units by microbial culture. A high antimicrobial efficacy on biofilms of both plasma sources in comparison to CHX treatment was shown. The efficacy differs between the used strains and plasma sources. For illustration, the biofilms were examined under a scanning electron microscope before and after treatment. Additionally, cytotoxicity was determined by the MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay with L929 mouse fibroblast cell line. The cell toxicity of the used plasma limits its applicability on human tissue to maximally 150 s. The emitted UV irradiance was measured to estimate whether UV could limit the application on human tissue at the given parameters. It was found that the UV emission is negligibly low. In conclusion, the results support the assumption that air plasma could be an option for therapy of chronic wounds.

In vitro efficacy of cold atmospheric pressure plasma on S. sanguinis biofilms in comparison of two test models.

Dental plaque critically affects the etiology of caries, periodontitis and periimplantitis. The mechanical removal of plaque can only be performed partially due to limited accessibility. Therefore, plaque still represents one of the major therapeutic challenges. Even though antiseptic mouth rinses reduce the extent of biofilm temporarily, plaque removal remains incomplete and continuous usage can even result in side effects. Here we tested argon plasma produced by kinpen09 as one option to inactivate microorganisms and to eliminate plaque. S. sanguinis biofilms cultivated in either the European Biofilm Reactor (EUREBI) or in 24 well plates were treated with argon plasma. In both test systems a homogeneous, good analyzable and stable biofilm was produced on the surface of titan plates within 72 h (>6,9 log10 CFU/ml). Despite the significantly more powerful biofilm production in EUREBI, the difference of 0.4 log10 CFU/ml between EUREBI and the 24 well plates was practically not relevant. For that reason both test models were equally qualified for the analysis of efficacy of cold atmospheric pressure plasma. We demonstrate a significant reduction of the biofilm compared to the control in both test models. After plasma application of 180 s the biofilm produced in EUREBI or in 24 well plates was decreased by 0.6 log10 CFU/ml or 0.5 log10 CFU/ml, respectively. In comparison to recently published studies analyzing the efficacy of kinpen09, S. sanguinis produces a hardly removable biofilm. Future investigations using reduced distances between plasma source and biofilm, various compositions of plasma and alternative plasma sources will contribute to further optimization of the efficacy against S. sanguinis biofilms.

Synergistic Effects of Nonthermal Plasma and Disinfecting Agents against Dental Biofilms In Vitro.

Aim. Dental biofilms play a major role in the pathogenesis of many dental diseases. In this study, we evaluated the synergistic effect of atmospheric pressure plasma and different agents in dentistry on the reduction of biofilms. Methods and Results. We used monospecies (S. mutans) and multispecies dental biofilm models grown on titanium discs in vitro. After treatment with one of the agents, the biofilms were treated with plasma. Efficacy of treatment was determined by the number of colony forming units (CFU) and by live-dead staining. For S. mutans biofilms no colonies could be detected after treatment with NaOCl or H2O2. For multispecies biofilms the combination with plasma achieved a higher CFU reduction than each agent alone. We found an additive antimicrobial effect between argon plasma and agents irrespective of the treatment order with cultivation technique. For EDTA and octenidine, antimicrobial efficacy assessed by live-dead staining differed significantly between the two treatment orders (P < 0.05). Conclusions. The effective treatment of dental biofilms on titanium discs with atmospheric pressure plasma could be increased by adding agents in vitro.

Pilot-study on the influence of carrier gas and plasma application (open resp. delimited) modifications on physical plasma and its antimicrobial effect against Pseudomonas aeruginosa and Staphylococcus aureus.

INTRODUCTION: Physical plasma is a promising new technology regarding its antimicrobial effects. This is especially accounting for treatment of bacterial infection of chronic wounds. Plasma can be generated with different carrier gases causing various biological effects. Screening of different carrier gases and plasma generation setups is therefore needed to find suitable compositions for highly effective antimicrobial plasma treatments and other applications. METHOD: The plasma source used was a radio-frequency plasma jet which generates tissue tolerable plasma (TTP). The study compared the antimicrobial efficacy of air, argon, or helium plasma alone or admixed with 0.1%, 0.5%, and 1% oxygen against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus). Treatment took place in an environmentally open and delimited system. Therefore, bacteria were plated on agar and treated with plasma in a punctiform manner. The resulting inhibition zones were measured and the reduction factors were calculated by colony counting, respectively. RESULTS: For S. aureus and P. aeruginosa, inhibition zones and overall reduction of colony forming units (CFU) on the agar plate were observed while an accumulative reduction of CFU dominated for S. aureus. The highest antimicrobial effect was shown in form of an inhibition zone for argon plasma with 0.1% oxygen admixture for both species. S. aureus was more sensitive for helium plasma with >0.1% oxygen admixture compared to P. aeruginosa which in turn was more sensitive for argon plasma with and without oxygen. The efficacy of air plasma was very low in comparison to the other gases. The treatment in a closed system predominantly enhanced the antimicrobial effect. The effect intensity varied for each treatment time and gas mixtures. DISCUSSION: As expected, the antimicrobial effect mostly increased when increasing oxygen admixture to the carrier gases. The variation in bacterial growth and inhibition after exposure to different plasma gas compositions could be due to a varying generation of reactive oxygen species or radiation. CONCLUSION: The applied plasma in a "closed system" accumulates bactericidal plasma species and might increase antimicrobial efficacy in clinical settings as in wound management involving multi-drug resistant bacteria.

Atmospheric pressure plasma: a high-performance tool for the efficient removal of biofilms.

INTRODUCTION: The medical use of non-thermal physical plasmas is intensively investigated for sterilization and surface modification of biomedical materials. A further promising application is the removal or etching of organic substances, e.g., biofilms, from surfaces, because remnants of biofilms after conventional cleaning procedures are capable to entertain inflammatory processes in the adjacent tissues. In general, contamination of surfaces by micro-organisms is a major source of problems in health care. Especially biofilms are the most common type of microbial growth in the human body and therefore, the complete removal of pathogens is mandatory for the prevention of inflammatory infiltrate. Physical plasmas offer a huge potential to inactivate micro-organisms and to remove organic materials through plasma-generated highly reactive agents. METHOD: In this study a Candida albicans biofilm, formed on polystyrene (PS) wafers, as a prototypic biofilm was used to verify the etching capability of the atmospheric pressure plasma jet operating with two different process gases (argon and argon/oxygen mixture). The capability of plasma-assisted biofilm removal was assessed by microscopic imaging. RESULTS: The Candida albicans biofilm, with a thickness of 10 to 20 µm, was removed within 300 s plasma treatment when oxygen was added to the argon gas discharge, whereas argon plasma alone was practically not sufficient in biofilm removal. The impact of plasma etching on biofilms is localized due to the limited presence of reactive plasma species validated by optical emission spectroscopy.

XTT assay of ex vivo saliva biofilms to test antimicrobial influences.

OBJECTIVE: Many dental diseases are attributable to biofilms. The screening of antimicrobial substances, in particular, requires a high sample throughput and a realistic model, the evaluation must be as quick and as simple as possible. For this purpose, a colorimetric assay of the tetrazolium salt XTT (sodium 3'-[1-[(phenylamino)-carbony]-3,4-tetrazolium]-bis(4-methoxy-6-nitro)benzene-sulfonic acid hydrate) converted by saliva biofilms is recommended. Cleavage of XTT by dehydrogenase enzymes of metabolically active cells in biofilms yields a highly colored formazan product which is measured photometrically. MATERIALS AND METHOD: The suitability of the XTT assay for detecting the vitality of ex vivo saliva biofilms was tested to determine the efficacy of chlorhexidine and ozone versus saliva biofilms grown on titanium discs. RESULTS: The XTT method lends itself to testing the vitality of microorganisms in saliva biofilms. The sensitivity of the arrays requires a specific minimum number of pathogens, this number being different for planktonic bacteria and those occurring in biofilms. The antibacterial effect after treatment with chlorhexidine or ozone was measured by XTT conversion that was significantly reduced. The antimicrobial efficacy of 60 s 0.5% and 0.1% chlorhexidine treatment was equal and comparable with 60 s ozone treatment. CONCLUSION: The XTT assay is a suitable method to determine the vitality in saliva biofilms, permitting assessment of the efficacy of antimicrobial substances. Its quick and easy applicability renders it especially suitable for screening.

Screening test for quality control of surface barrier discharged plasma sources with the microorganism-agar test (MAT).

In the recent past, the antimicrobial applicability of tissue tolerable plasma (TTP) has been examined, and is increasing in importance. Many different plasma sources can be used medically. In order to obtain reliable test results by using plasma sources, it is essential not only to assess physical parameters but also to screen a use-oriented application of plasma sources. It is necessary to both determine the biological efficacy and establish uniform coverage of the treated surfaces. This article shows a simple screening method for this. We used newly inoculated agar plates with bacterial test organisms and treated the agar plates with two surface barrier discharged (SDB) plasmas. The carrier gas was argon and air.