Liquid Metal Doping Induced Asymmetry in Two-Dimensional Metal Oxides.

The emergence of ferroelectricity in two-dimensional (2D) metal oxides is a topic of significant technological interest; however, many 2D metal oxides lack intrinsic ferroelectric properties. Therefore, introducing asymmetry provides access to a broader range of 2D materials within the ferroelectric family. Here, the generation of asymmetry in 2D SnO by doping the material with Hf0.5Zr0.5O2 (HZO) is demonstrated. A liquid metal process as a doping strategy for the preparation of 2D HZO-doped SnO with robust ferroelectric characteristics is implemented. This technology takes advantage of the selective interface enrichment of molten Sn with HZO crystallites. Molecular dynamics simulations indicate a strong tendency of Hf and Zr atoms to migrate toward the surface of liquid metal and embed themselves within the growing oxide layer in the form of HZO. Thus, the liquid metal-based harvesting/doping technique is a feasible approach devised for producing novel 2D metal oxides with induced ferroelectric properties, represents a significant development for the prospects of random-access memories.

Highly Mesoporous Hybrid Transition Metal Oxide Nanowires for Enhanced Adsorption of Rare Earth Elements from Wastewater.

Removal of rare earth elements (REEs) from industrial wastewater is a continual challenge. To date, several approaches to the synthesis of nanoadsorbants for this application have been reported, although these are characterized by insufficient adsorption capacity and limitations in cycling stability. The present work reports the fabrication and performance of hierarchical hybrid transition metal oxide (TMO) nanowires deposited on carbon fibers. An ordered assembly of hybrid TMO nanowires exhibits an outstanding adsorbance of 1000 mg·g-1 of REEs with 93% recyclability. This superior performance is attributed to the unique mesoporous architecture of the nanowires, which exhibits a high surface area of 122 cm3·g-1. Further, rapid adsorption/desorption of the REEs reveals minimal morphological alteration and hence high structural stability of these hybrid TMO nanowires after multiple cycles. The ready accessibility of the adsorption sites at crystallite boundaries and the surfaces as well as rapid adsorption of the REEs on the mesoporous nanostructure facilitate considerable adsorption capacity, improved structural stability, and extended cyclability, all of which suggest the potential for this material in REE extraction.

Liquid Metal Droplet and Graphene Co-Fillers for Electrically Conductive Flexible Composites.

Colloidal liquid metal alloys of gallium, with melting points below room temperature, are potential candidates for creating electrically conductive and flexible composites. However, inclusion of liquid metal micro- and nanodroplets into soft polymeric matrices requires a harsh auxiliary mechanical pressing to rupture the droplets to establish continuous pathways for high electrical conductivity. However, such a destructive strategy reduces the integrity of the composites. Here, this problem is solved by incorporating small loading of nonfunctionalized graphene flakes into the composites. The flakes introduce cavities that are filled with liquid metal after only relatively mild press-rolling (<0.1 MPa) to form electrically conductive continuous pathways within the polymeric matrix, while maintaining the integrity and flexibility of the composites. The composites are characterized to show that even very low graphene loadings (≈0.6 wt%) can achieve high electrical conductivity. The electrical conductance remains nearly constant, with changes less than 0.5%, even under a relatively high applied pressure of >30 kPa. The composites are used for forming flexible electrically-conductive tracks in electronic circuits with a self-healing property. The demonstrated application of co-fillers, together with liquid metal droplets, can be used for establishing electrically-conductive printable-composite tracks for future large-area flexible electronics.

DFT Study of Methanol Adsorption on Defect-Free CeO2 Low-Index Surfaces.

Methanol decomposition is a promising method for hydrogen production. However, the performance of current catalysts for this process is not sufficient for commercial applications. In this work, methanol adsorption on the CeO2 low-index surfaces is studied by density functional theory (DFT). The results show that methanol always dissociates spontaneously on the (100) surface, whereas dissociation on the (110) surface is site-selective; dissociation does not occur at all on the (111) surface, where only weak physisorption is found. The results confirm that surfaces with higher energies are more catalytically active. Analysis of the surface geometries shows that the dominant factors for the dissociation of methanol are the degree of undercoordination and the charges of the surface ions. The adsorption energy of each methanol molecule decreases with increasing coverage and there is a transition threshold between dissociative and associative adsorption. The present work indicates that a strategy to design catalysts with high activity is to maximize exposure of surfaces on which the ions have a high degree of undercoordination and a strong tendency to donate/accept electrons. The results demonstrate the importance of appropriately selecting and controlling exposed facets and particle morphology for optimizing catalyst performance.

Surface, Subsurface, and Bulk Oxygen Vacancies Quantified by Decoupling and Deconvolution of the Defect Structure of Redox-Active Nanoceria.

Oxygen vacancy concentrations are critical to the redox/photocatalytic performance of nanoceria, but their direct analysis is problematic under controlled atmospheres but essentially impossible under aqueous conditions. The present work provides three novel approaches to analyze these data from XPS data for the three main morphologies of nanoceria synthesized under aqueous conditions and tested using in vacuo analytical conditions. First, the total oxygen vacancy concentrations are decoupled quantitatively into surface-filled, subsurface-unfilled, and bulk values. Second, the relative surface areas are calculated for all exposed crystallographic planes. Third, XPS and redox performance data are deconvoluted according to the relative surface areas of these planes. Correlations based on two independent empirical results from volumetric surface XPS, combined with sequential deep XPS and independent EELS data, confirm that these approaches provide quantitative determinations of the different oxygen vacancy concentrations. Critically, the redox/photocatalytic performance depends not on the total oxygen vacancy concentration but on the concentration of the active sites on each plane in the form of subsurface-unfilled oxygen vacancies. This is verified by the pH-dependent performance, which can be increased significantly by exposing these vacancies to the surroundings. These approaches have significance to the design and engineering of semiconducting materials exposed to the environment.

Enhancement of Ce/Cr Codopant Solubility and Chemical Homogeneity in TiO2 Nanoparticles through Sol-Gel versus Pechini Syntheses.

Ce/Cr codoped TiO2 nanoparticles were synthesized using sol-gel and Pechini methods with heat treatment at 400 °C for 4 h. A conventional sol-gel process produced well-crystallized anatase, while Pechini synthesis yielded less-ordered mixed-phase anatase + rutile; this suggests that the latter method enhances Ce solubility and increases chemical homogeneity but destabilizes the TiO2 lattice. Greater structural disruption from the decomposition of the Pechini precursor formed more open agglomerated morphologies, while the lower levels of structural disruption from pyrolysis of the dried sol-gel precursor resulted in denser agglomerates of lower surface areas. Codoping and associated destabilization of the lattice reduced the binding energies in both powders. Cr4+ formation in sol-gel powders and Cr6+ formation in Pechini powders suggest that these valence changes derive from synergistic electron exchange from intervalence and/or multivalence charge transfer. Since Ce is too large to allow either substitutional or interstitial solid solubility, the concept of integrated solubility is introduced, in which the Ti site and an adjacent interstice are occupied by the large Ce ion. The photocatalytic performance data show that codoping was detrimental owing to the effects of reduced crystallinity from lattice destabilization and surface area. Two regimes of mechanistic behavior are seen, which are attributed to the unsaturated solid solutions at lower codopant levels and supersaturated solid solutions at higher levels. The present work demonstrates that the Pechini method offers a processing technique that is superior to sol-gel because the former facilitates solid solubility and consequent chemical homogeneity.

Multivalence Charge Transfer in Doped and Codoped Photocatalytic TiO2.

The present work reports data for the mineralogical and chemical properties of anatase thin films individually doped or codoped with chromium and vanadium, fabricated by sol-gel spin coating on glass substrates and annealing at 450 °C for 2 h. X-ray photoelectron spectroscopy data indicated the presence of Ti(4+), Ti(3+), Cr(3+), and possibly Cr(4+) in the Cr-doped thin films; Ti(4+), Ti(3+), V(3+), V(4+), and possibly V(5+) in the V-doped thin films; and Ti(4+), Ti(3+), Cr(3+), Cr(4+), V(3+), V(4+), and possibly V(5+) in the codoped thin films. While the thermodynamically stable valences Ti(4+), Cr(3+), and V(5+) would be expected to have formed, the presence of the nonequilibrium valences Ti(3+), Cr(4+), V(3+), and V(4+) is considered to have resulted from intervalence charge transfer for the Cr-doped and V-doped systems but from multivalence charge transfer (MVCT) for the codoped system. The latter phenomenon, which is introduced as a new conceptual term, describes the nature of the mutual exchange of electrons during valence changes of both dopant (Cr, V) and matrix (Ti) ions during annealing. In the present case, MVCT appears to be a transient metastable condition that acts during annealing, but subsequent UV irradiation can alter its effects.

ROS-mediated anticancer effects of EGFR-targeted nanoceria.

The therapeutic effectiveness of anticancer drugs, including nanomedicines, can be enhanced with active receptor-targeting strategies. Epidermal growth factor receptor (EGFR) is an important cancer biomarker, constitutively expressed in sarcoma patients of different histological types. The present work reports materials and in vitro biomedical analyses of silanized (passive delivery) and/or EGF-functionalized (active delivery) ceria nanorods exhibiting highly defective catalytically active surfaces. The EGFR-targeting efficiency of nanoceria was confirmed by receptor-binding studies. Increased cytotoxicity and reactive oxygen species (ROS) production were observed for EGF-functionalized nanoceria owing to enhanced cellular uptake by HT-1080 fibrosarcoma cells. The uptake was confirmed by TEM and confocal microscopy. Silanized nanoceria demonstrated negligible/minimal cytotoxicity toward healthy MRC-5 cells at 24 and 48 h, whereas this was significant at 72 h owing to a nanoceria accumulation effect. In contrast, considerable cytotoxicity toward the cancer cells was exhibited at all three times points. The ROS generation and associated cytotoxicity were moderated by the equilibrium between catalysis by ceria, generation of cell debris, and blockage of active sites. EGFR-targeting is shown to enhance the uptake levels of nanoceria by cancer cells, subsequently enhancing the overall anticancer activity and therapeutic performance of ceria.

Stacking Fault-Enriched MoNi4/MoO2 Enables High-Performance Hydrogen Evolution.

Producing green hydrogen in a cost-competitive manner via water electrolysis will make the long-held dream of hydrogen economy a reality. Although platinum (Pt)-based catalysts show good performance toward hydrogen evolution reaction (HER), the high cost and scarce abundance challenge their economic viability and sustainability. Here, a non-Pt, high-performance electrocatalyst for HER achieved by engineering high fractions of stacking fault (SF) defects for MoNi4/MoO2 nanosheets (d-MoNi) through a combined chemical and thermal reduction strategy is shown. The d-MoNi catalyst offers ultralow overpotentials of 78 and 121 mV for HER at current densities of 500 and 1000 mA cm-2 in 1 M KOH, respectively. The defect-rich d-MoNi exhibits four times higher turnover frequency than the benchmark 20% Pt/C, together with its excellent durability (> 100 h), making it one of the best-performing non-Pt catalysts for HER. The experimental and theoretical results reveal that the abundant SFs in d-MoNi induce a compressive strain, decreasing the proton adsorption energy and promoting the associated combination of *H into hydrogen and molecular hydrogen desorption, enhancing the HER performance. This work provides a new synthetic route to engineer defective metal and metal alloy electrocatalysts for emerging electrochemical energy conversion and storage applications.

Theranostic Activity of Ceria-Based Nanoparticles toward Parental and Metastatic Melanoma: 2D vs 3D Models.

The time interval between the diagnosis of tumor in a patient and the initiation of treatment plays a key role in determining the survival rates. Consequently, theranostics, which is a combination of diagnosis and treatment, can be expected to improve survival rates. Early detection and immediate treatment initiation are particularly important in the management of melanoma, where survival rates decrease considerably after metastasis. The present work reports for the first time the application of fluorescein isothiocyanate (FITC)-tagged epidermal growth factor receptor (EGFR)-functionalized ceria nanoparticles, which exhibit intrinsic reactive oxygen species (ROS)-mediated anticancer effects, for the EGFR-targeted diagnosis and treatment of melanoma. The theranostic activity was demonstrated using two-dimensional (2D) and three-dimensional (3D) models of parental and metastatic melanoma. Confocal imaging studies confirm the diagnostic activity of the system. The therapeutic efficiency was evaluated using cell viability studies and ROS measurements. The ROS elevation levels are compared across the 2D and 3D models. Significant enhancement in the generation of cellular ROS and absence in mitochondrial ROS are observed in the 2D models. In contrast, significant elevations in both ROS types are observed for the 3D models, which are significantly higher for the metastatic spheroids than the parental spheroids, thus indicating the suitability of this nanoformulation for the treatment of metastatic melanoma.

Composition-driven morphological evolution of BaTiO3 nanowires for efficient piezocatalytic hydrogen production.

Hydrogen production from water by piezocatalysis is very attractive owing to its high energy efficiency and novelty. BaTiO3, a highly piezoelectric material, is particularly suitable for this application due to its high piezoelectric potential, non-toxic nature, and physicochemical stability. Owing to the critical role of morphology on properties, one-dimensional (1D) materials are expected to exhibit superior water-splitting performance and thus there is a need to optimise the processing conditions to develop outstanding piezocatalysts. In the present work, piezoelectric BaTiO3 nanowires (NWs) were hydrothermally synthesised with precursor Ba:Ti molar ratios of 1:1, 2:1, and 4:1. The morphology, defect chemistry, and hydrogen evolution reaction (HER) efficiency of the as-synthesised BaTiO3 NWs were systematically investigated. The results showed that the morphological features, aspect ratio, structural stability and defect contents of the 1D morphologies collectively have a significant impact on the HER efficiency. The morphological evolution mechanism of the 1D structures were described in terms of ion exchange and dissolution-growth processes of template-grown BaTiO3 NWs for different Ba:Ti molar ratios. Notably, the BaTiO3 NWs synthesised with Ba:Ti molar ratio of 2:1 displayed high crystallinity, good defect concentrations, and good structural integrity under ultrasonication, resulting in an outstanding HER efficiency of 149.24 µmol h-1g-1 which is the highest obtained for nanowire morphologies. These results highlight the importance of synthesis conditions for BaTiO3 NWs for generating excellent piezocatalytic water splitting performance. Additionally, post-ultrasonication tested BaTiO3 NWs demonstrated unexpected photocatalytic activity, with the BTO-1 sample (1:1 Ba:Ti) exhibiting 56% photodegradation of RhB in 2 h of UV irradiation.

Principles of Design and Synthesis of Metal Derivatives from MOFs.

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

Unveiling the mechanisms behind surface degradation of dental resin composites in simulated oral environments.

Dental resin composites are widely used as restorative materials due to their natural aesthetic and versatile properties. However, there has been limited research on the degradation mechanisms of these composites in gastric acid environments, which would be common in patients with gastroesophageal reflux. This study aims to investigate the degradation behavior of dental composites immersed in simulated oral environments, including acid, saliva, and water. Mechanical and morphological properties of the composites, upon immersion in the simulated environments, were thoroughly examined using hardness testing and SEM imaging. Qualitative analyses of the ions leached from the polymer matrix and fillers were conducted using XPS and ICP-MS. In addition, the thermodynamic stability of the inorganic fillers of the composites in aqueous solutions across a wide range of pH values was theoretically studied through construction of Pourbaix diagrams. This study proposed a mechanism for composite leaching involving interactions between the matrix's hydrophilic groups and the aqueous immersion media, leading to swelling and chemical degradation of the composites. Furthermore, it was demonstrated that filler leaching was followed by ion exchange with Ca and P, resulting in the formation of hard calcified layers on the composite surface. The current findings provide valuable insights into the development of new composite materials with improved durability and resistance to degradation, especially for patients suffering from gastroesophageal reflux.

Recent advances in in situ and operando characterization techniques for Li7La3Zr2O12-based solid-state lithium batteries.

Li7La3Zr2O12 (LLZO)-based solid-state Li batteries (SSLBs) have emerged as one of the most promising energy storage systems due to the potential advantages of solid-state electrolytes (SSEs), such as ionic conductivity, mechanical strength, chemical stability and electrochemical stability. However, there remain several scientific and technical obstacles that need to be tackled before they can be commercialised. The main issues include the degradation and deterioration of SSEs and electrode materials, ambiguity in the Li+ migration routes in SSEs, and interface compatibility between SSEs and electrodes during the charging and discharging processes. Using conventional ex situ characterization techniques to unravel the reasons that lead to these adverse results often requires disassembly of the battery after operation. The sample may be contaminated during the disassembly process, resulting in changes in the material properties within the battery. In contrast, in situ/operando characterization techniques can capture dynamic information during cycling, enabling real-time monitoring of batteries. Therefore, in this review, we briefly illustrate the key challenges currently faced by LLZO-based SSLBs, review recent efforts to study LLZO-based SSLBs using various in situ/operando microscopy and spectroscopy techniques, and elaborate on the capabilities and limitations of these in situ/operando techniques. This review paper not only presents the current challenges but also outlines future developmental prospects for the practical implementation of LLZO-based SSLBs. By identifying and addressing the remaining challenges, this review aims to enhance the comprehensive understanding of LLZO-based SSLBs. Additionally, in situ/operando characterization techniques are highlighted as a promising avenue for future research. The findings presented here can serve as a reference for battery research and provide valuable insights for the development of different types of solid-state batteries.

Density Functional Theory Investigation of the Biocatalytic Mechanisms of pH-Driven Biomimetic Behavior in CeO2.

There is considerable interest in the pH-dependent, switchable, biocatalytic properties of cerium oxide (CeO2) nanoparticles in biomedicine, where these materials exhibit beneficial antioxidant activity against reactive oxygen species (ROS) at a basic physiological pH but cytotoxic prooxidant activity in an acidic cancer cell pH microenvironment. While the general characteristics of the role of oxygen vacancies are known, the mechanism of their action at the atomic scale under different pH conditions has yet to be elucidated. The present work applies density functional theory (DFT) calculations to interpret, at the atomic scale, the pH-induced behavior of the stable {111} surface of CeO2 containing oxygen vacancies. Analysis of the surface-adsorbed media species reveals the critical role of pH on the interaction between ROS (•O2- and H2O2) and the defective CeO2 {111} surface. Under basic conditions, the superoxide dismutase (SOD) and catalase (CAT) biomimetic reactions can be performed cyclically, scavenging and decomposing ROS to harmless products, making CeO2 an excellent antioxidant. However, under acidic conditions, the CAT biomimetic reaction is hindered owing to the limited reversibility of Ce3+ ↔ Ce4+ and formation ↔ annihilation of oxygen vacancies. A Fenton biomimetic reaction (H2O2 + Ce3+ → Ce4+ + OH- + •OH) is predicted to occur simultaneously with the SOD and CAT biomimetic reactions, resulting in the formation of hydroxyl radicals, making CeO2 a cytotoxic prooxidant.

Inorganic nanoparticle-based advanced cancer therapies: Promising combination strategies.

Inorganic nanoparticles for drug delivery in cancer treatment offer many potential advantages because they can maximize therapeutic effect through targeting ligands while minimizing off-target side-effects through drug adsorption and infiltration. Although inorganic nanoparticles were introduced as drug carriers, they have emerged as having the capacity for combined therapeutic capabilities, including anticancer effects through cytotoxicity, suppression of oncogenes and cancer cell signaling pathway inhibition. The most promising advanced strategies for cancer therapy are as synergistic platforms for RNA interference (siRNA, miRNA, shRNA) and as synergistic drug delivery agents for the inhibition of cancer cell signaling pathways. The present work summarizes relevant current work, the promise of which is suggested by a projected compound annual growth rate of âˆ¼ 20% for drug delivery alone.

Anticancer therapeutic effect of cerium-based nanoparticles: known and unknown molecular mechanisms.

Cerium-based nanoparticles (CeNPs), particularly cerium oxide (CeO2), have been studied extensively for their antioxidant and prooxidant properties. However, their complete redox and enzyme-mimetic mechanisms of therapeutic action at the molecular level remain elusive, constraining their potential for clinical translation. Although the therapeutic effects of both antioxidant and prooxidant mechanisms generally are attributed to Ce3+ ↔ Ce4+ redox switching mediation, some studies have hinted at the involvement of unknown pathways in therapeutic effects. While redox switching is recognised increasingly as playing a key role in ROS-dependent cancer therapy, ROS-independent cytotoxicity mechanisms, such as Ce4+ dissolution and autophagy, also are emerging as being of importance. Although ROS-mediated prooxidant therapies are the most intensively studied, particularly in the context of cancer, the antioxidant activity deriving from the redox switching, particularly during radiation therapy, also plays an important role in the protection of normal cells during radiation therapy, hence reducing adverse effects. Since cancer cell proliferation results in aberrant behaviour of the tumour microenvironment (TME), then CeNP-based therapies are being used to address a multiplicity of known and unknown factors that aim to normalise the TME and thus prevent this aberrant behaviour. Although it is perceived that the pH plays a key role in the therapeutic performance of cerium-based nanoparticles, this is not conclusive because the relative importances of other factors, particularly Ce dissolution, Ce3+/Ce4+ ratio, cellular H2O2 level, and the role of anions, remain poorly understood. Consequently, the present work explores these multiple chemistry-driven mechanisms, which are both ROS-dependent and ROS-independent, in cancer therapy.

Recent advances of metal telluride anodes for high-performance lithium/sodium-ion batteries.

Metal tellurides (MTs) have emerged as highly promising candidate anode materials for state-of-the-art lithium-ion batteries (LIBs) and sodium ion batteries (SIBs). This is owing to the unique crystal structure, high intrinsic conductivity, and high trap density of such materials. The present work delivers a detailed discussion on the latest research and progress associated with the use of MTs for LIBs/SIBs with a focus on reaction mechanisms, challenges, electrochemical performance, and synthesis strategies. Further, the prospects and future development of MT anode materials are discussed in terms of strategies to overcome the existing limitations. This review provides both an in-depth understanding of MTs and provides the driving force for expanding research on MTs for energy storage and conversion applications.